Commit 0a6d3158 authored by Linus Walleij's avatar Linus Walleij

gpio: split gpiod board registration into machine header

As per example from the regulator subsystem: put all defines and
functions related to registering board info for GPIO descriptors
into a separate <linux/gpio/machine.h> header.

Cc: Andrew Victor <linux@maxim.org.za>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: default avatarStephen Warren <swarren@wwwdotorg.org>
Reviewed-by: default avatarAlexandre Courbot <gnurou@gmail.com>
Signed-off-by: Linus Walleij's avatarLinus Walleij <linus.walleij@linaro.org>
parent c7caf868
......@@ -60,7 +60,7 @@ Platform Data
Finally, GPIOs can be bound to devices and functions using platform data. Board
files that desire to do so need to include the following header:
#include <linux/gpio/driver.h>
#include <linux/gpio/machine.h>
GPIOs are mapped by the means of tables of lookups, containing instances of the
gpiod_lookup structure. Two macros are defined to help declaring such mappings:
......
......@@ -15,7 +15,7 @@
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <linux/gpio/driver.h>
#include <linux/gpio/machine.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
......
......@@ -18,7 +18,7 @@
*/
#include <linux/platform_device.h>
#include <linux/gpio/driver.h>
#include <linux/gpio/machine.h>
#include <linux/rfkill-gpio.h>
#include "board.h"
......
......@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/gpio/machine.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
......
......@@ -14,6 +14,7 @@
#include <linux/slab.h>
#include <linux/acpi.h>
#include <linux/gpio/driver.h>
#include <linux/gpio/machine.h>
#include "gpiolib.h"
......
......@@ -151,60 +151,6 @@ void gpio_unlock_as_irq(struct gpio_chip *chip, unsigned int offset);
struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc);
enum gpio_lookup_flags {
GPIO_ACTIVE_HIGH = (0 << 0),
GPIO_ACTIVE_LOW = (1 << 0),
GPIO_OPEN_DRAIN = (1 << 1),
GPIO_OPEN_SOURCE = (1 << 2),
};
/**
* struct gpiod_lookup - lookup table
* @chip_label: name of the chip the GPIO belongs to
* @chip_hwnum: hardware number (i.e. relative to the chip) of the GPIO
* @con_id: name of the GPIO from the device's point of view
* @idx: index of the GPIO in case several GPIOs share the same name
* @flags: mask of GPIO_* values
*
* gpiod_lookup is a lookup table for associating GPIOs to specific devices and
* functions using platform data.
*/
struct gpiod_lookup {
const char *chip_label;
u16 chip_hwnum;
const char *con_id;
unsigned int idx;
enum gpio_lookup_flags flags;
};
struct gpiod_lookup_table {
struct list_head list;
const char *dev_id;
struct gpiod_lookup table[];
};
/*
* Simple definition of a single GPIO under a con_id
*/
#define GPIO_LOOKUP(_chip_label, _chip_hwnum, _con_id, _flags) \
GPIO_LOOKUP_IDX(_chip_label, _chip_hwnum, _con_id, 0, _flags)
/*
* Use this macro if you need to have several GPIOs under the same con_id.
* Each GPIO needs to use a different index and can be accessed using
* gpiod_get_index()
*/
#define GPIO_LOOKUP_IDX(_chip_label, _chip_hwnum, _con_id, _idx, _flags) \
{ \
.chip_label = _chip_label, \
.chip_hwnum = _chip_hwnum, \
.con_id = _con_id, \
.idx = _idx, \
.flags = _flags, \
}
void gpiod_add_lookup_table(struct gpiod_lookup_table *table);
#ifdef CONFIG_GPIOLIB_IRQCHIP
void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip,
......
#ifndef __LINUX_GPIO_MACHINE_H
#define __LINUX_GPIO_MACHINE_H
enum gpio_lookup_flags {
GPIO_ACTIVE_HIGH = (0 << 0),
GPIO_ACTIVE_LOW = (1 << 0),
GPIO_OPEN_DRAIN = (1 << 1),
GPIO_OPEN_SOURCE = (1 << 2),
};
/**
* struct gpiod_lookup - lookup table
* @chip_label: name of the chip the GPIO belongs to
* @chip_hwnum: hardware number (i.e. relative to the chip) of the GPIO
* @con_id: name of the GPIO from the device's point of view
* @idx: index of the GPIO in case several GPIOs share the same name
* @flags: mask of GPIO_* values
*
* gpiod_lookup is a lookup table for associating GPIOs to specific devices and
* functions using platform data.
*/
struct gpiod_lookup {
const char *chip_label;
u16 chip_hwnum;
const char *con_id;
unsigned int idx;
enum gpio_lookup_flags flags;
};
struct gpiod_lookup_table {
struct list_head list;
const char *dev_id;
struct gpiod_lookup table[];
};
/*
* Simple definition of a single GPIO under a con_id
*/
#define GPIO_LOOKUP(_chip_label, _chip_hwnum, _con_id, _flags) \
GPIO_LOOKUP_IDX(_chip_label, _chip_hwnum, _con_id, 0, _flags)
/*
* Use this macro if you need to have several GPIOs under the same con_id.
* Each GPIO needs to use a different index and can be accessed using
* gpiod_get_index()
*/
#define GPIO_LOOKUP_IDX(_chip_label, _chip_hwnum, _con_id, _idx, _flags) \
{ \
.chip_label = _chip_label, \
.chip_hwnum = _chip_hwnum, \
.con_id = _con_id, \
.idx = _idx, \
.flags = _flags, \
}
void gpiod_add_lookup_table(struct gpiod_lookup_table *table);
#endif /* __LINUX_GPIO_MACHINE_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment