I was hitting the following warning:

WARNING: CPU: 0 PID: 1 at kernel/trace/trace_irqsoff.c:631 tracer_hardirqs_off+0x15/0x2a

Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc6-test+ #13
Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
EIP: tracer_hardirqs_off+0x15/0x2a
Code: ff 85 c0 74 0e 8b 45 00 8b 50 04 8b 45 04 e8 35 ff ff ff 5d c3 55 64 a1 cc 37 51 c1 a9 ff ff ff 7f 89 e5 53 89 d3 89 ca 75 02 <0f> 0b e8 90 fc ff ff 85 c0 74 07 89 d8 e8 0c ff ff ff 5b 5d c3 55
EAX: 80000000 EBX: c04337f0 ECX: c04338e3 EDX: c04338e3
ESI: c04337f0 EDI: c04338e3 EBP: f2aa1d68 ESP: f2aa1d64
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210046
CR0: 80050033 CR2: 00000000 CR3: 01668000 CR4: 001406f0
Call Trace:
 trace_irq_disable_rcuidle+0x63/0x6c
 trace_hardirqs_off+0x26/0x30
 default_send_IPI_mask_allbutself_logical+0x31/0x93
 default_send_IPI_allbutself+0x37/0x48
 native_send_call_func_ipi+0x4d/0x6a
 smp_call_function_many+0x165/0x19d
 ? add_nops+0x34/0x34
 ? trace_hardirqs_on_caller+0x2d/0x2d
 ? add_nops+0x34/0x34
 smp_call_function+0x1f/0x23
 on_each_cpu+0x15/0x43
 ? trace_hardirqs_on_caller+0x2d/0x2d
 ? trace_hardirqs_on_caller+0x2d/0x2d
 ? trace_irq_disable_rcuidle+0x1/0x6c
 text_poke_bp+0xa0/0xc2
 ? trace_hardirqs_on_caller+0x2d/0x2d
 arch_jump_label_transform+0xa7/0xcb
 ? trace_irq_disable_rcuidle+0x5/0x6c
 __jump_label_update+0x3e/0x6d
 jump_label_update+0x7d/0x81
 static_key_slow_inc_cpuslocked+0x58/0x6d
 static_key_slow_inc+0x19/0x20
 tracepoint_probe_register_prio+0x19e/0x1d1
 ? start_critical_timings+0x1c/0x1c
 tracepoint_probe_register+0xf/0x11
 irqsoff_tracer_init+0x21/0xf2
 tracer_init+0x16/0x1a
 trace_selftest_startup_irqsoff+0x25/0xc4
 run_tracer_selftest+0xca/0x131
 register_tracer+0xd5/0x172
 ? trace_event_define_fields_preemptirq_template+0x45/0x45
 init_irqsoff_tracer+0xd/0x11
 do_one_initcall+0xab/0x1e8
 ? rcu_read_lock_sched_held+0x3d/0x44
 ? trace_initcall_level+0x52/0x86
 kernel_init_freeable+0x195/0x21a
 ? rest_init+0xb4/0xb4
 kernel_init+0xd/0xe4
 ret_from_fork+0x2e/0x38

It is due to running a CONFIG_PREEMPT_VOLUNTARY kernel, which would trigger
this warning every time:

	WARN_ON_ONCE(preempt_count());

Because on CONFIG_PREEMPT_VOLUNTARY, preempt_count() is always zero.

This warning is to make sure preempt_count is set because
tracer_hardirqs_on() does a preempt_enable_notrace() to make the
preempt_trace() work properly, as being called by a trace event, the trace
event code disables preemption, and the tracer wants to know what the
preemption was before it was called.

Instead of enabling preemption like this, just record the preempt_count,
subtract PREEMPT_DISABLE_OFFSET from it (which is zero with !CONFIG_PREEMPT
set), and pass that value to the necessary functions, which should use the
passed in parameter instead of calling preempt_count() directly.

Fixes: da5b3ebb

 ("tracing: irqsoff: Account for additional preempt_disable")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>