ina3221.txt 1005 Bytes
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44
Texas Instruments INA3221 Device Tree Bindings

1) ina3221 node
  Required properties:
  - compatible: Must be "ti,ina3221"
  - reg: I2C address

  Optional properties:
  = The node contains optional child nodes for three channels =
  = Each child node describes the information of input source =

  - #address-cells: Required only if a child node is present. Must be 1.
  - #size-cells: Required only if a child node is present. Must be 0.

2) child nodes
  Required properties:
  - reg: Must be 0, 1 or 2, corresponding to IN1, IN2 or IN3 port of INA3221

  Optional properties:
  - label: Name of the input source
  - shunt-resistor-micro-ohms: Shunt resistor value in micro-Ohm

Example:

ina3221@40 {
	compatible = "ti,ina3221";
	reg = <0x40>;
	#address-cells = <1>;
	#size-cells = <0>;

	input@0 {
		reg = <0x0>;
		status = "disabled";
	};
	input@1 {
		reg = <0x1>;
		shunt-resistor-micro-ohms = <5000>;
	};
	input@2 {
		reg = <0x2>;
		label = "VDD_5V";
		shunt-resistor-micro-ohms = <5000>;
	};
};