kirkwood_thermal.c 3.45 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134
/*
 * Kirkwood thermal sensor driver
 *
 * Copyright (C) 2012 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
 *
 * This software is licensed under the terms of the GNU General Public
 * License version 2, as published by the Free Software Foundation, and
 * may be copied, distributed, and modified under those terms.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 */
#include <linux/device.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/thermal.h>

#define KIRKWOOD_THERMAL_VALID_OFFSET	9
#define KIRKWOOD_THERMAL_VALID_MASK	0x1
#define KIRKWOOD_THERMAL_TEMP_OFFSET	10
#define KIRKWOOD_THERMAL_TEMP_MASK	0x1FF

/* Kirkwood Thermal Sensor Dev Structure */
struct kirkwood_thermal_priv {
	void __iomem *sensor;
};

static int kirkwood_get_temp(struct thermal_zone_device *thermal,
			  unsigned long *temp)
{
	unsigned long reg;
	struct kirkwood_thermal_priv *priv = thermal->devdata;

	reg = readl_relaxed(priv->sensor);

	/* Valid check */
	if (!(reg >> KIRKWOOD_THERMAL_VALID_OFFSET) &
	    KIRKWOOD_THERMAL_VALID_MASK) {
		dev_err(&thermal->device,
			"Temperature sensor reading not valid\n");
		return -EIO;
	}

	/*
	 * Calculate temperature. See Section 8.10.1 of the 88AP510,
	 * datasheet, which has the same sensor.
	 * Documentation/arm/Marvell/README
	 */
	reg = (reg >> KIRKWOOD_THERMAL_TEMP_OFFSET) &
		KIRKWOOD_THERMAL_TEMP_MASK;
	*temp = ((2281638UL - (7298*reg)) / 10);

	return 0;
}

static struct thermal_zone_device_ops ops = {
	.get_temp = kirkwood_get_temp,
};

static const struct of_device_id kirkwood_thermal_id_table[] = {
	{ .compatible = "marvell,kirkwood-thermal" },
	{}
};

static int kirkwood_thermal_probe(struct platform_device *pdev)
{
	struct thermal_zone_device *thermal = NULL;
	struct kirkwood_thermal_priv *priv;
	struct resource *res;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res) {
		dev_err(&pdev->dev, "Failed to get platform resource\n");
		return -ENODEV;
	}

	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
	if (!priv)
		return -ENOMEM;

	priv->sensor = devm_request_and_ioremap(&pdev->dev, res);
	if (!priv->sensor) {
		dev_err(&pdev->dev, "Failed to request_ioremap memory\n");
		return -EADDRNOTAVAIL;
	}

	thermal = thermal_zone_device_register("kirkwood_thermal", 0, 0,
					       priv, &ops, NULL, 0, 0);
	if (IS_ERR(thermal)) {
		dev_err(&pdev->dev,
			"Failed to register thermal zone device\n");
		return PTR_ERR(thermal);
	}

	platform_set_drvdata(pdev, thermal);

	return 0;
}

static int kirkwood_thermal_exit(struct platform_device *pdev)
{
	struct thermal_zone_device *kirkwood_thermal =
		platform_get_drvdata(pdev);

	thermal_zone_device_unregister(kirkwood_thermal);
	platform_set_drvdata(pdev, NULL);

	return 0;
}

MODULE_DEVICE_TABLE(of, kirkwood_thermal_id_table);

static struct platform_driver kirkwood_thermal_driver = {
	.probe = kirkwood_thermal_probe,
	.remove = kirkwood_thermal_exit,
	.driver = {
		.name = "kirkwood_thermal",
		.owner = THIS_MODULE,
		.of_match_table = of_match_ptr(kirkwood_thermal_id_table),
	},
};

module_platform_driver(kirkwood_thermal_driver);

MODULE_AUTHOR("Nobuhiro Iwamatsu <iwamatsu@nigauri.org>");
MODULE_DESCRIPTION("kirkwood thermal driver");
MODULE_LICENSE("GPL");