ALSA-Configuration.txt 75.5 KB
Newer Older
Linus Torvalds's avatar
Linus Torvalds committed
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59

		Advanced Linux Sound Architecture - Driver
		==========================================
			    Configuration guide


Kernel Configuration
====================

To enable ALSA support you need at least to build the kernel with
primary sound card support (CONFIG_SOUND).  Since ALSA can emulate OSS,
you don't have to choose any of the OSS modules.

Enable "OSS API emulation" (CONFIG_SND_OSSEMUL) and both OSS mixer and
PCM supports if you want to run OSS applications with ALSA.

If you want to support the WaveTable functionality on cards such as
SB Live! then you need to enable "Sequencer support"
(CONFIG_SND_SEQUENCER).

To make ALSA debug messages more verbose, enable the "Verbose printk"
and "Debug" options.  To check for memory leaks, turn on "Debug memory"
too.  "Debug detection" will add checks for the detection of cards.

Please note that all the ALSA ISA drivers support the Linux isapnp API
(if the card supports ISA PnP).  You don't need to configure the cards
using isapnptools.


Creating ALSA devices
=====================

This depends on your distribution, but normally you use the /dev/MAKEDEV
script to create the necessary device nodes.  On some systems you use a
script named 'snddevices'.


Module parameters
=================

The user can load modules with options. If the module supports more than
one card and you have more than one card of the same type then you can
specify multiple values for the option separated by commas.

Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.

  Module snd
  ----------

    The core ALSA module.  It is used by all ALSA card drivers.
    It takes the following options which have global effects.

    major	- major number for sound driver
		- Default: 116
    cards_limit
		- limiting card index for auto-loading (1-8)
		- Default: 1
		- For auto-loading more than one card, specify this
		  option together with snd-card-X aliases.
60 61 62
    slots	- Reserve the slot index for the given driver.
		  This option takes multiple strings.		
		  See "Module Autoloading Support" section for details.
Takashi Iwai's avatar
Takashi Iwai committed
63 64 65 66 67 68
    debug	- Specifies the debug message level
		  (0 = disable debug prints, 1 = normal debug messages,
		   2 = verbose debug messages)
		  This option appears only when CONFIG_SND_DEBUG=y.
		  This option can be dynamically changed via sysfs
		  /sys/modules/snd/parameters/debug file.
Linus Torvalds's avatar
Linus Torvalds committed
69 70 71 72 73 74 75 76 77 78 79 80
  
  Module snd-pcm-oss
  ------------------

    The PCM OSS emulation module.
    This module takes options which change the mapping of devices.

    dsp_map	- PCM device number maps assigned to the 1st OSS device.
		- Default: 0
    adsp_map	- PCM device number maps assigned to the 2st OSS device.
		- Default: 1
    nonblock_open
Takashi Iwai's avatar
Takashi Iwai committed
81
		- Don't block opening busy PCM devices.  Default: 1
Linus Torvalds's avatar
Linus Torvalds committed
82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110

    For example, when dsp_map=2, /dev/dsp will be mapped to PCM #2 of
    the card #0.  Similarly, when adsp_map=0, /dev/adsp will be mapped
    to PCM #0 of the card #0.
    For changing the second or later card, specify the option with
    commas, such like "dsp_map=0,1".

    nonblock_open option is used to change the behavior of the PCM
    regarding opening the device.  When this option is non-zero,
    opening a busy OSS PCM device won't be blocked but return
    immediately with EAGAIN (just like O_NONBLOCK flag).
    
  Module snd-rawmidi
  ------------------

    This module takes options which change the mapping of devices.
    similar to those of the snd-pcm-oss module.

    midi_map	- MIDI device number maps assigned to the 1st OSS device.
		- Default: 0
    amidi_map	- MIDI device number maps assigned to the 2st OSS device.
		- Default: 1

  Common parameters for top sound card modules
  --------------------------------------------

    Each of top level sound card module takes the following options.

    index	- index (slot #) of sound card
111
		- Values: 0 through 31 or negative
Linus Torvalds's avatar
Linus Torvalds committed
112 113 114 115 116 117 118 119 120 121 122 123 124 125
		- If nonnegative, assign that index number
                - if negative, interpret as a bitmask of permissible
		  indices; the first free permitted index is assigned
		- Default: -1
    id		- card ID (identifier or name)
		- Can be up to 15 characters long
		- Default: the card type
		- A directory by this name is created under /proc/asound/
		  containing information about the card
		- This ID can be used instead of the index number in
		  identifying the card
    enable  	- enable card
		- Default: enabled, for PCI and ISA PnP cards

Rene Herman's avatar
Rene Herman committed
126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153
  Module snd-adlib
  ----------------

    Module for AdLib FM cards.

    port	- port # for OPL chip

    This module supports multiple cards. It does not support autoprobe, so
    the port must be specified. For actual AdLib FM cards it will be 0x388.
    Note that this card does not have PCM support and no mixer; only FM
    synthesis.

    Make sure you have "sbiload" from the alsa-tools package available and,
    after loading the module, find out the assigned ALSA sequencer port
    number through "sbiload -l". Example output:

      Port     Client name                       Port name
      64:0     OPL2 FM synth                     OPL2 FM Port

    Load the std.sb and drums.sb patches also supplied by sbiload:

      sbiload -p 64:0 std.sb drums.sb

    If you use this driver to drive an OPL3, you can use std.o3 and drums.o3
    instead. To have the card produce sound, use aplaymidi from alsa-utils:

      aplaymidi -p 64:0 foo.mid

Linus Torvalds's avatar
Linus Torvalds committed
154 155 156 157 158
  Module snd-ad1816a
  ------------------

    Module for sound cards based on Analog Devices AD1816A/AD1815 ISA chips.

159
    clockfreq   - Clock frequency for AD1816A chip (default = 0, 33000Hz)
Linus Torvalds's avatar
Linus Torvalds committed
160
    
161
    This module supports multiple cards, autoprobe and PnP.
Linus Torvalds's avatar
Linus Torvalds committed
162 163 164 165 166 167 168 169 170 171
    
  Module snd-ad1848
  -----------------

    Module for sound cards based on AD1848/AD1847/CS4248 ISA chips.

    port	- port # for AD1848 chip
    irq		- IRQ # for AD1848  chip
    dma1	- DMA # for AD1848 chip (0,1,3)
    
172
    This module supports multiple cards.  It does not support autoprobe
Linus Torvalds's avatar
Linus Torvalds committed
173 174
    thus main port must be specified!!! Other ports are optional.
    
175 176
    The power-management is supported.

177 178 179 180 181 182 183 184
  Module snd-ad1889
  -----------------

    Module for Analog Devices AD1889 chips.

    ac97_quirk  - AC'97 workaround for strange hardware
                  See the description of intel8x0 module for details.

185
    This module supports multiple cards.
186

Linus Torvalds's avatar
Linus Torvalds committed
187 188 189 190 191 192 193 194 195
  Module snd-ali5451
  ------------------

    Module for ALi M5451 PCI chip.

    pcm_channels    - Number of hardware channels assigned for PCM
    spdif           - Support SPDIF I/O
    		    - Default: disabled

196
    This module supports one chip and autoprobe.
Linus Torvalds's avatar
Linus Torvalds committed
197 198 199 200 201 202 203 204

    The power-management is supported.

  Module snd-als100
  -----------------

    Module for sound cards based on Avance Logic ALS100/ALS120 ISA chips.

205
    This module supports multiple cards, autoprobe and PnP.
Linus Torvalds's avatar
Linus Torvalds committed
206

207 208
    The power-management is supported.

209 210 211 212 213 214 215 216 217
  Module snd-als300
  -----------------

    Module for  Avance Logic ALS300 and ALS300+

    This module supports multiple cards.

    The power-management is supported.

Linus Torvalds's avatar
Linus Torvalds committed
218 219 220 221 222 223 224 225
  Module snd-als4000
  ------------------

    Module for sound cards based on Avance Logic ALS4000 PCI chip.

    joystick_port - port # for legacy joystick support.
                    0 = disabled (default), 1 = auto-detect
    
226
    This module supports multiple cards, autoprobe and PnP.
Linus Torvalds's avatar
Linus Torvalds committed
227

228 229
    The power-management is supported.

Linus Torvalds's avatar
Linus Torvalds committed
230 231 232
  Module snd-atiixp
  -----------------

Takashi Iwai's avatar
Takashi Iwai committed
233
    Module for ATI IXP 150/200/250/400 AC97 controllers.
Linus Torvalds's avatar
Linus Torvalds committed
234

Takashi Iwai's avatar
Takashi Iwai committed
235
    ac97_clock		- AC'97 clock (default = 48000)
Linus Torvalds's avatar
Linus Torvalds committed
236
    ac97_quirk		- AC'97 workaround for strange hardware
Takashi Iwai's avatar
Takashi Iwai committed
237
			  See "AC97 Quirk Option" section below.
238 239 240 241 242 243
    ac97_codec		- Workaround to specify which AC'97 codec 
			  instead of probing.  If this works for you
			  file a bug with your `lspci -vn` output.
			  -2  -- Force probing.
			  -1  -- Default behavior.
			  0-2 -- Use the specified codec.
Linus Torvalds's avatar
Linus Torvalds committed
244 245
    spdif_aclink	- S/PDIF transfer over AC-link (default = 1)

246
    This module supports one card and autoprobe.
Linus Torvalds's avatar
Linus Torvalds committed
247

Takashi Iwai's avatar
Takashi Iwai committed
248 249 250 251 252
    ATI IXP has two different methods to control SPDIF output.  One is
    over AC-link and another is over the "direct" SPDIF output.  The
    implementation depends on the motherboard, and you'll need to
    choose the correct one via spdif_aclink module option.

253 254
    The power-management is supported.

Linus Torvalds's avatar
Linus Torvalds committed
255 256 257 258 259
  Module snd-atiixp-modem
  -----------------------

    Module for ATI IXP 150/200/250 AC97 modem controllers.

260
    This module supports one card and autoprobe.
Linus Torvalds's avatar
Linus Torvalds committed
261 262 263 264

    Note: The default index value of this module is -2, i.e. the first
          slot is excluded.

265 266
    The power-management is supported.

Linus Torvalds's avatar
Linus Torvalds committed
267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288
  Module snd-au8810, snd-au8820, snd-au8830
  -----------------------------------------

    Module for Aureal Vortex, Vortex2 and Advantage device.

    pcifix	- Control PCI workarounds
		  0 = Disable all workarounds
		  1 = Force the PCI latency of the Aureal card to 0xff
		  2 = Force the Extend PCI#2 Internal Master for Efficient
		      Handling of Dummy Requests on the VIA KT133 AGP Bridge
		  3 = Force both settings
		  255 = Autodetect what is required (default)

    This module supports all ADB PCM channels, ac97 mixer, SPDIF, hardware
    EQ, mpu401, gameport. A3D and wavetable support are still in development.
    Development and reverse engineering work is being coordinated at
    http://savannah.nongnu.org/projects/openvortex/
    SPDIF output has a copy of the AC97 codec output, unless you use the
    "spdif" pcm device, which allows raw data passthru.
    The hardware EQ hardware and SPDIF is only present in the Vortex2 and 
    Advantage.

Takashi Iwai's avatar
Takashi Iwai committed
289
    Note: Some ALSA mixer applications don't handle the SPDIF sample rate 
Linus Torvalds's avatar
Linus Torvalds committed
290 291 292
           control correctly. If you have problems regarding this, try
           another ALSA compliant mixer (alsamixer works).

293 294 295 296 297 298 299
  Module snd-aw2
  --------------

    Module for Audiowerk2 sound card

    This module supports multiple cards.

Linus Torvalds's avatar
Linus Torvalds committed
300 301 302 303 304
  Module snd-azt2320
  ------------------

    Module for sound cards based on Aztech System AZT2320 ISA chip (PnP only).

305
    This module supports multiple cards, PnP and autoprobe.
Linus Torvalds's avatar
Linus Torvalds committed
306
    
307 308
    The power-management is supported.

Linus Torvalds's avatar
Linus Torvalds committed
309 310 311 312 313 314 315
  Module snd-azt3328
  ------------------

    Module for sound cards based on Aztech AZF3328 PCI chip.

    joystick	- Enable joystick (default off)

316
    This module supports multiple cards.
Linus Torvalds's avatar
Linus Torvalds committed
317 318 319 320 321 322 323 324 325

  Module snd-bt87x
  ----------------

    Module for video cards based on Bt87x chips.

    digital_rate - Override the default digital rate (Hz)
    load_all	- Load the driver even if the card model isn't known

326
    This module supports multiple cards.
Linus Torvalds's avatar
Linus Torvalds committed
327 328 329 330 331 332 333 334 335

    Note: The default index value of this module is -2, i.e. the first
          slot is excluded.

  Module snd-ca0106
  -----------------

    Module for Creative Audigy LS and SB Live 24bit

336
    This module supports multiple cards.
Linus Torvalds's avatar
Linus Torvalds committed
337 338 339 340 341 342 343


  Module snd-cmi8330
  ------------------

    Module for sound cards based on C-Media CMI8330 ISA chips.

344 345 346 347
    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)

    with isapnp=0, the following options are available:

Linus Torvalds's avatar
Linus Torvalds committed
348 349 350 351 352 353 354
    wssport	- port # for CMI8330 chip (WSS)
    wssirq	- IRQ # for CMI8330 chip (WSS)
    wssdma	- first DMA # for CMI8330 chip (WSS)
    sbport	- port # for CMI8330 chip (SB16)
    sbirq	- IRQ # for CMI8330 chip (SB16)
    sbdma8	- 8bit DMA # for CMI8330 chip (SB16)
    sbdma16	- 16bit DMA # for CMI8330 chip (SB16)
355 356 357
    fmport	- (optional) OPL3 I/O port
    mpuport	- (optional) MPU401 I/O port
    mpuirq	- (optional) MPU401 irq #
Linus Torvalds's avatar
Linus Torvalds committed
358

359
    This module supports multiple cards and autoprobe.
Linus Torvalds's avatar
Linus Torvalds committed
360

361 362
    The power-management is supported.

Linus Torvalds's avatar
Linus Torvalds committed
363 364 365
  Module snd-cmipci
  -----------------

366
    Module for C-Media CMI8338/8738/8768/8770 PCI sound cards.
Linus Torvalds's avatar
Linus Torvalds committed
367

368
    mpu_port    - port address of MIDI interface (8338 only):
369
		  0x300,0x310,0x320,0x330 = legacy port,
370
		  0 = disable (default)
371 372 373
    fm_port     - port address of OPL-3 FM synthesizer (8x38 only):
		  0x388 = legacy port,
		  1 = integrated PCI port (default on 8738),
374
		  0 = disable
Takashi Iwai's avatar
Takashi Iwai committed
375
    soft_ac3    - Software-conversion of raw SPDIF packets (model 033 only)
Linus Torvalds's avatar
Linus Torvalds committed
376 377 378
                  (default = 1)
    joystick_port - Joystick port address (0 = disable, 1 = auto-detect)

379
    This module supports autoprobe and multiple cards.
Linus Torvalds's avatar
Linus Torvalds committed
380
    
381 382
    The power-management is supported.

Linus Torvalds's avatar
Linus Torvalds committed
383 384 385 386 387 388 389 390 391 392 393 394
  Module snd-cs4231
  -----------------

    Module for sound cards based on CS4231 ISA chips.

    port	- port # for CS4231 chip
    mpu_port	- port # for MPU-401 UART (optional), -1 = disable
    irq		- IRQ # for CS4231 chip
    mpu_irq	- IRQ # for MPU-401 UART
    dma1	- first DMA # for CS4231 chip
    dma2	- second DMA # for CS4231 chip
    
395
    This module supports multiple cards. This module does not support autoprobe
Linus Torvalds's avatar
Linus Torvalds committed
396 397 398 399 400 401 402
    thus main port must be specified!!! Other ports are optional.

    The power-management is supported.
    
  Module snd-cs4236
  -----------------

403 404
    Module for sound cards based on CS4232/CS4232A,
    	       	     	   	   CS4235/CS4236/CS4236B/CS4237B/
Linus Torvalds's avatar
Linus Torvalds committed
405 406
                                   CS4238B/CS4239 ISA chips.

407 408 409 410
    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)

    with isapnp=0, the following options are available:

Linus Torvalds's avatar
Linus Torvalds committed
411 412 413 414 415 416 417 418 419
    port	- port # for CS4236 chip (PnP setup - 0x534)
    cport	- control port # for CS4236 chip (PnP setup - 0x120,0x210,0xf00)
    mpu_port	- port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
    fm_port	- FM port # for CS4236 chip (PnP setup - 0x388), -1 = disable
    irq		- IRQ # for CS4236 chip (5,7,9,11,12,15)
    mpu_irq	- IRQ # for MPU-401 UART (9,11,12,15)
    dma1	- first DMA # for CS4236 chip (0,1,3)
    dma2	- second DMA # for CS4236 chip (0,1,3), -1 = disable
    
420
    This module supports multiple cards. This module does not support autoprobe
Linus Torvalds's avatar
Linus Torvalds committed
421 422 423 424 425
    (if ISA PnP is not used) thus main port and control port must be
    specified!!! Other ports are optional.

    The power-management is supported.

426 427 428
    This module is aliased as snd-cs4232 since it provides the old
    snd-cs4232 functionality, too.

Linus Torvalds's avatar
Linus Torvalds committed
429 430 431 432 433 434 435
  Module snd-cs4281
  -----------------

    Module for Cirrus Logic CS4281 soundchip.

    dual_codec	- Secondary codec ID (0 = disable, default)

436
    This module supports multiple cards.
Linus Torvalds's avatar
Linus Torvalds committed
437 438 439 440 441 442 443 444 445

    The power-management is supported.

  Module snd-cs46xx
  -----------------

    Module for PCI sound cards based on CS4610/CS4612/CS4614/CS4615/CS4622/
				       CS4624/CS4630/CS4280 PCI chips.

Takashi Iwai's avatar
Takashi Iwai committed
446
    external_amp     - Force to enable external amplifier.
Linus Torvalds's avatar
Linus Torvalds committed
447 448 449
    thinkpad         - Force to enable Thinkpad's CLKRUN control.
    mmap_valid       - Support OSS mmap mode (default = 0).

450
    This module supports multiple cards and autoprobe.
Linus Torvalds's avatar
Linus Torvalds committed
451 452 453 454 455
    Usually external amp and CLKRUN controls are detected automatically
    from PCI sub vendor/device ids.  If they don't work, give the options
    above explicitly.

    The power-management is supported.
456 457 458 459 460 461

  Module snd-cs5530
  _________________

    Module for Cyrix/NatSemi Geode 5530 chip. 
  
462 463 464 465 466
  Module snd-cs5535audio
  ----------------------

    Module for multifunction CS5535 companion PCI device

467
    The power-management is supported.
468

Wai Yew CHAY's avatar
Wai Yew CHAY committed
469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487
  Module snd-ctxfi
  ----------------

    Module for Creative Sound Blaster X-Fi boards (20k1 / 20k2 chips)
	* Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series
	* Creative Sound Blaster X-Fi Titanium Fatal1ty Professional Series
	* Creative Sound Blaster X-Fi Titanium Professional Audio
	* Creative Sound Blaster X-Fi Titanium
	* Creative Sound Blaster X-Fi Elite Pro
	* Creative Sound Blaster X-Fi Platinum
	* Creative Sound Blaster X-Fi Fatal1ty
	* Creative Sound Blaster X-Fi XtremeGamer
	* Creative Sound Blaster X-Fi XtremeMusic

    reference_rate	- reference sample rate, 44100 or 48000 (default)
    multiple		- multiple to ref. sample rate, 1 or 2 (default)

    This module supports multiple cards.

488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503
  Module snd-darla20
  ------------------

    Module for Echoaudio Darla20

    This module supports multiple cards.
    The driver requires the firmware loader support on kernel.

  Module snd-darla24
  ------------------

    Module for Echoaudio Darla24

    This module supports multiple cards.
    The driver requires the firmware loader support on kernel.

Linus Torvalds's avatar
Linus Torvalds committed
504 505 506 507 508 509
  Module snd-dt019x
  -----------------

    Module for Diamond Technologies DT-019X / Avance Logic ALS-007 (PnP
    only)

510
    This module supports multiple cards.  This module is enabled only with
Linus Torvalds's avatar
Linus Torvalds committed
511 512
    ISA PnP support.

513 514
    The power-management is supported.

Linus Torvalds's avatar
Linus Torvalds committed
515 516 517 518 519 520 521
  Module snd-dummy
  ----------------

    Module for the dummy sound card. This "card" doesn't do any output
    or input, but you may use this module for any application which
    requires a sound card (like RealPlayer).

522 523 524
    pcm_devs       - Number of PCM devices assigned to each card
                     (default = 1, up to 4)
    pcm_substreams - Number of PCM substreams assigned to each PCM
525
                     (default = 8, up to 128)
526
    hrtimer        - Use hrtimer (=1, default) or system timer (=0)
527
    fake_buffer    - Fake buffer allocations (default = 1)
528 529 530 531 532 533 534 535

    When multiple PCM devices are created, snd-dummy gives different
    behavior to each PCM device:
      0 = interleaved with mmap support
      1 = non-interleaved with mmap support
      2 = interleaved without mmap 
      3 = non-interleaved without mmap

536 537 538 539 540 541
    As default, snd-dummy drivers doesn't allocate the real buffers
    but either ignores read/write or mmap a single dummy page to all
    buffer pages, in order to save the resouces.  If your apps need
    the read/ written buffer data to be consistent, pass fake_buffer=0
    option.

542 543
    The power-management is supported.

544 545 546 547 548 549 550 551
  Module snd-echo3g
  -----------------

    Module for Echoaudio 3G cards (Gina3G/Layla3G)

    This module supports multiple cards.
    The driver requires the firmware loader support on kernel.

Linus Torvalds's avatar
Linus Torvalds committed
552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568
  Module snd-emu10k1
  ------------------

    Module for EMU10K1/EMU10k2 based PCI sound cards.
			* Sound Blaster Live!
			* Sound Blaster PCI 512
			* Emu APS (partially supported)
			* Sound Blaster Audigy

    extin   - bitmap of available external inputs for FX8010 (see bellow)
    extout  - bitmap of available external outputs for FX8010 (see bellow)
    seq_ports - allocated sequencer ports (4 by default)
    max_synth_voices - limit of voices used for wavetable (64 by default)
    max_buffer_size  - specifies the maximum size of wavetable/pcm buffers
                       given in MB unit.  Default value is 128.
    enable_ir - enable IR

569
    This module supports multiple cards and autoprobe.
Linus Torvalds's avatar
Linus Torvalds committed
570 571 572 573 574 575 576 577 578 579 580 581 582 583 584

    Input & Output configurations 			[extin/extout]
	* Creative Card wo/Digital out			[0x0003/0x1f03]
	* Creative Card w/Digital out			[0x0003/0x1f0f]
	* Creative Card w/Digital CD in			[0x000f/0x1f0f]
	* Creative Card wo/Digital out + LiveDrive	[0x3fc3/0x1fc3]
	* Creative Card w/Digital out + LiveDrive	[0x3fc3/0x1fcf]
	* Creative Card w/Digital CD in + LiveDrive	[0x3fcf/0x1fcf]
	* Creative Card wo/Digital out + Digital I/O 2  [0x0fc3/0x1f0f]
	* Creative Card w/Digital out + Digital I/O 2	[0x0fc3/0x1f0f]
	* Creative Card w/Digital CD in + Digital I/O 2	[0x0fcf/0x1f0f]
        * Creative Card 5.1/w Digital out + LiveDrive	[0x3fc3/0x1fff]
	* Creative Card 5.1 (c) 2003			[0x3fc3/0x7cff]
        * Creative Card all ins and outs		[0x3fff/0x7fff]
    
585 586
    The power-management is supported.

Linus Torvalds's avatar
Linus Torvalds committed
587 588 589 590 591
  Module snd-emu10k1x
  -------------------

    Module for Creative Emu10k1X (SB Live Dell OEM version)

592
    This module supports multiple cards.
Linus Torvalds's avatar
Linus Torvalds committed
593 594 595 596 597 598 599 600 601 602

  Module snd-ens1370
  ------------------

    Module for Ensoniq AudioPCI ES1370 PCI sound cards.
			* SoundBlaster PCI 64
			* SoundBlaster PCI 128

    joystick		- Enable joystick (default off)

603
    This module supports multiple cards and autoprobe.
Linus Torvalds's avatar
Linus Torvalds committed
604
    
605 606
    The power-management is supported.

Linus Torvalds's avatar
Linus Torvalds committed
607 608 609 610 611 612 613 614 615 616 617
  Module snd-ens1371
  ------------------

    Module for Ensoniq AudioPCI ES1371 PCI sound cards.
			* SoundBlaster PCI 64
			* SoundBlaster PCI 128
			* SoundBlaster Vibra PCI

    joystick_port	- port # for joystick (0x200,0x208,0x210,0x218),
			  0 = disable (default), 1 = auto-detect

618
    This module supports multiple cards and autoprobe.
Linus Torvalds's avatar
Linus Torvalds committed
619
    
620 621
    The power-management is supported.

Linus Torvalds's avatar
Linus Torvalds committed
622 623 624 625 626
  Module snd-es968
  ----------------

    Module for sound cards based on ESS ES968 chip (PnP only).

627
    This module supports multiple cards, PnP and autoprobe.
Linus Torvalds's avatar
Linus Torvalds committed
628
    
629 630
    The power-management is supported.

Linus Torvalds's avatar
Linus Torvalds committed
631 632 633 634 635 636
  Module snd-es1688
  -----------------

    Module for ESS AudioDrive ES-1688 and ES-688 sound cards.

    port	- port # for ES-1688 chip (0x220,0x240,0x260)
637
    fm_port	- port # for OPL3 (option; share the same port as default)
Linus Torvalds's avatar
Linus Torvalds committed
638 639 640 641 642
    mpu_port	- port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
    irq		- IRQ # for ES-1688 chip (5,7,9,10)
    mpu_irq	- IRQ # for MPU-401 port (5,7,9,10)
    dma8	- DMA # for ES-1688 chip (0,1,3)

643
    This module supports multiple cards and autoprobe (without MPU-401 port).
Linus Torvalds's avatar
Linus Torvalds committed
644 645 646 647 648 649

  Module snd-es18xx
  -----------------

    Module for ESS AudioDrive ES-18xx sound cards.

650 651 652 653
    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)

    with isapnp=0, the following options are available:

Linus Torvalds's avatar
Linus Torvalds committed
654 655 656 657 658 659 660
    port	- port # for ES-18xx chip (0x220,0x240,0x260)
    mpu_port	- port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
    fm_port	- port # for FM (optional, not used)
    irq		- IRQ # for ES-18xx chip (5,7,9,10)
    dma1	- first DMA # for ES-18xx chip (0,1,3)
    dma2	- first DMA # for ES-18xx chip (0,1,3)

661 662
    This module supports multiple cards, ISA PnP and autoprobe (without MPU-401
    port if native ISA PnP routines are not used).
Linus Torvalds's avatar
Linus Torvalds committed
663 664 665 666 667 668 669 670 671
    When dma2 is equal with dma1, the driver works as half-duplex.

    The power-management is supported.

  Module snd-es1938
  -----------------

    Module for sound cards based on ESS Solo-1 (ES1938,ES1946) chips.

672
    This module supports multiple cards and autoprobe.
Linus Torvalds's avatar
Linus Torvalds committed
673

674 675
    The power-management is supported.

Linus Torvalds's avatar
Linus Torvalds committed
676 677 678 679 680 681 682 683 684 685 686 687 688 689
  Module snd-es1968
  -----------------

    Module for sound cards based on ESS Maestro-1/2/2E (ES1968/ES1978) chips.

    total_bufsize	- total buffer size in kB (1-4096kB)
    pcm_substreams_p	- playback channels (1-8, default=2)
    pcm_substreams_c	- capture channels (1-8, default=0)
    clock		- clock (0 = auto-detection)
    use_pm		- support the power-management (0 = off, 1 = on,
			  2 = auto (default))
    enable_mpu		- enable MPU401 (0 = off, 1 = on, 2 = auto (default))
    joystick		- enable joystick (default off)       

690
    This module supports multiple cards and autoprobe.
Linus Torvalds's avatar
Linus Torvalds committed
691 692 693 694 695 696 697 698 699 700 701 702 703 704 705

    The power-management is supported.

  Module snd-fm801
  ----------------

    Module for ForteMedia FM801 based PCI sound cards.

    tea575x_tuner       - Enable TEA575x tuner
                          - 1 = MediaForte 256-PCS
                          - 2 = MediaForte 256-PCPR
                          - 3 = MediaForte 64-PCR  
                          - High 16-bits are video (radio) device number + 1
                          - example: 0x10002 (MediaForte 256-PCPR, device 1)

706
    This module supports multiple cards and autoprobe.
Linus Torvalds's avatar
Linus Torvalds committed
707
    
708 709
    The power-management is supported.

710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725
  Module snd-gina20
  -----------------

    Module for Echoaudio Gina20

    This module supports multiple cards.
    The driver requires the firmware loader support on kernel.

  Module snd-gina24
  -----------------

    Module for Echoaudio Gina24

    This module supports multiple cards.
    The driver requires the firmware loader support on kernel.

Linus Torvalds's avatar
Linus Torvalds committed
726 727 728 729 730 731 732 733 734 735 736 737 738
  Module snd-gusclassic
  ---------------------

    Module for Gravis UltraSound Classic sound card.

    port	- port # for GF1 chip (0x220,0x230,0x240,0x250,0x260)
    irq		- IRQ # for GF1 chip (3,5,9,11,12,15)
    dma1	- DMA # for GF1 chip (1,3,5,6,7)
    dma2	- DMA # for GF1 chip (1,3,5,6,7,-1=disable)
    joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
    voices	- GF1 voices limit (14-32)
    pcm_voices	- reserved PCM voices

739
    This module supports multiple cards and autoprobe.
Linus Torvalds's avatar
Linus Torvalds committed
740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757

  Module snd-gusextreme
  ---------------------

    Module for Gravis UltraSound Extreme (Synergy ViperMax) sound card.

    port	- port # for ES-1688 chip (0x220,0x230,0x240,0x250,0x260)
    gf1_port	- port # for GF1 chip (0x210,0x220,0x230,0x240,0x250,0x260,0x270)
    mpu_port	- port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable
    irq		- IRQ # for ES-1688 chip (5,7,9,10)
    gf1_irq	- IRQ # for GF1 chip (3,5,9,11,12,15)
    mpu_irq	- IRQ # for MPU-401 port (5,7,9,10)
    dma8	- DMA # for ES-1688 chip (0,1,3)
    dma1	- DMA # for GF1 chip (1,3,5,6,7)
    joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
    voices	- GF1 voices limit (14-32)
    pcm_voices	- reserved PCM voices

758
    This module supports multiple cards and autoprobe (without MPU-401 port).
Linus Torvalds's avatar
Linus Torvalds committed
759 760 761 762 763 764 765 766 767 768 769 770 771 772

  Module snd-gusmax
  -----------------

    Module for Gravis UltraSound MAX sound card.

    port	- port # for GF1 chip (0x220,0x230,0x240,0x250,0x260)
    irq		- IRQ # for GF1 chip (3,5,9,11,12,15)
    dma1	- DMA # for GF1 chip (1,3,5,6,7)
    dma2	- DMA # for GF1 chip (1,3,5,6,7,-1=disable)
    joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
    voices	- GF1 voices limit (14-32)
    pcm_voices	- reserved PCM voices

773
    This module supports multiple cards and autoprobe.
Linus Torvalds's avatar
Linus Torvalds committed
774 775 776 777
    
  Module snd-hda-intel
  --------------------

778 779 780 781
    Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8, ICH9, ICH10,
			PCH, SCH),
		ATI SB450, SB600, R600, RS600, RS690, RS780, RV610, RV620,
			RV630, RV635, RV670, RV770,
782 783
		VIA VT8251/VT8237A,
		SIS966, ULI M5461
Linus Torvalds's avatar
Linus Torvalds committed
784

785
    [Multiple options for each card instance]
Linus Torvalds's avatar
Linus Torvalds committed
786
    model	- force the model name
787
    position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF)
788
    probe_mask  - Bitmask to probe codecs (default = -1, meaning all slots)
789 790 791
    		  When the bit 8 (0x100) is set, the lower 8 bits are used
		  as the "fixed" codec slots; i.e. the driver probes the
		  slots regardless what hardware reports back
792 793
    probe_only	- Only probing and no codec initialization (default=off);
		  Useful to check the initial codec status for debugging
794 795 796
    bdl_pos_adj	- Specifies the DMA IRQ timing delay in samples.
		Passing -1 will make the driver to choose the appropriate
		value based on the controller chip.
797 798 799 800
    patch	- Specifies the early "patch" files to modify the HD-audio
    		setup before initializing the codecs.  This option is
		available only when CONFIG_SND_HDA_PATCH_LOADER=y is set.
		See HD-Audio.txt for details.
801 802 803
    beep_mode	- Selects the beep registration mode (0=off, 1=on, 2=
		dynamic registration via mute switch on/off); the default
		value is set via CONFIG_SND_HDA_INPUT_BEEP_MODE kconfig.
804 805
    
    [Single (global) options]
806 807
    single_cmd  - Use single immediate commands to communicate with
		codecs (for debugging only)
808
    enable_msi	- Enable Message Signaled Interrupt (MSI) (default = off)
809
    power_save	- Automatic power-saving timeout (in second, 0 =
810
		disable)
811 812
    power_save_controller - Reset HD-audio controller in power-saving mode
		(default = on)
Linus Torvalds's avatar
Linus Torvalds committed
813

814 815
    This module supports multiple cards and autoprobe.
    
816 817 818
    See Documentation/sound/alsa/HD-Audio.txt for more details about
    HD-audio driver.

Linus Torvalds's avatar
Linus Torvalds committed
819 820 821 822
    Each codec may have a model table for different configurations.
    If your machine isn't listed there, the default (usually minimal)
    configuration is set up.  You can pass "model=<name>" option to
    specify a certain model in such a case.  There are different
823 824
    models depending on the codec chip.  The list of available models
    is found in HD-Audio-Models.txt
825

826 827 828 829
    The model name "genric" is treated as a special case.  When this
    model is given, the driver uses the generic codec parser without
    "codec-patch".  It's sometimes good for testing and debugging.

Takashi Iwai's avatar
Takashi Iwai committed
830
    If the default configuration doesn't work and one of the above
831 832
    matches with your device, report it together with alsa-info.sh
    output (with --no-upload option) to kernel bugzilla or alsa-devel
Takashi Iwai's avatar
Takashi Iwai committed
833 834
    ML (see the section "Links and Addresses").

835 836
    power_save and power_save_controller options are for power-saving
    mode.  See powersave.txt for details.
837

838 839 840 841 842
    Note 2: If you get click noises on output, try the module option
	    position_fix=1 or 2.  position_fix=1 will use the SD_LPIB
	    register value without FIFO size correction as the current
	    DMA pointer.  position_fix=2 will make the driver to use
	    the position buffer instead of reading SD_LPIB register.
843
	    (Usually SD_LPIB register is more accurate than the
844 845
	    position buffer.)

846 847 848 849 850 851 852 853 854 855 856
    NB: If you get many "azx_get_response timeout" messages at
    loading, it's likely a problem of interrupts (e.g. ACPI irq
    routing).  Try to boot with options like "pci=noacpi".  Also, you
    can try "single_cmd=1" module option.  This will switch the
    communication method between HDA controller and codecs to the
    single immediate commands instead of CORB/RIRB.  Basically, the
    single command mode is provided only for BIOS, and you won't get
    unsolicited events, too.  But, at least, this works independently
    from the irq.  Remember this is a last resort, and should be
    avoided as much as possible...
    
857 858 859 860 861 862
    MORE NOTES ON "azx_get_response timeout" PROBLEMS:
    On some hardwares, you may need to add a proper probe_mask option
    to avoid the "azx_get_response timeout" problem above, instead.
    This occurs when the access to non-existing or non-working codec slot
    (likely a modem one) causes a stall of the communication via HD-audio
    bus.  You can see which codec slots are probed by enabling
863
    CONFIG_SND_DEBUG_VERBOSE, or simply from the file name of the codec
864 865 866 867
    proc files.  Then limit the slots to probe by probe_mask option.
    For example, probe_mask=1 means to probe only the first slot, and
    probe_mask=4 means only the third slot.

868 869
    The power-management is supported.

Linus Torvalds's avatar
Linus Torvalds committed
870 871 872 873 874
  Module snd-hdsp
  ---------------

    Module for RME Hammerfall DSP audio interface(s)

875
    This module supports multiple cards.
Linus Torvalds's avatar
Linus Torvalds committed
876 877 878 879 880 881 882 883 884 885 886

    Note: The firmware data can be automatically loaded via hotplug
          when CONFIG_FW_LOADER is set.  Otherwise, you need to load
          the firmware via hdsploader utility included in alsa-tools
          package.
          The firmware data is found in alsa-firmware package.

    Note: snd-page-alloc module does the job which snd-hammerfall-mem
          module did formerly.  It will allocate the buffers in advance
          when any HDSP cards are found.  To make the buffer
          allocation sure, load snd-page-alloc module in the early
887 888
          stage of boot sequence.  See "Early Buffer Allocation"
	  section.
Linus Torvalds's avatar
Linus Torvalds committed
889

890 891 892 893 894 895 896 897 898 899 900
  Module snd-hdspm
  ----------------

    Module for RME HDSP MADI board.

    precise_ptr		- Enable precise pointer, or disable.
    line_outs_monitor	- Send playback streams to analog outs by default.
    enable_monitor	- Enable Analog Out on Channel 63/64 by default.

    See hdspm.txt for details.

901 902 903 904 905 906 907
  Module snd-hifier
  -----------------

    Module for the MediaTek/TempoTec HiFier Fantasia sound card.

    This module supports autoprobe and multiple cards.

Linus Torvalds's avatar
Linus Torvalds committed
908 909 910 911 912 913 914 915 916 917 918 919 920 921 922
  Module snd-ice1712
  ------------------

    Module for Envy24 (ICE1712) based PCI sound cards.
			* MidiMan M Audio Delta 1010
			* MidiMan M Audio Delta 1010LT
			* MidiMan M Audio Delta DiO 2496
			* MidiMan M Audio Delta 66
			* MidiMan M Audio Delta 44
			* MidiMan M Audio Delta 410
			* MidiMan M Audio Audiophile 2496
                        * TerraTec EWS 88MT
                        * TerraTec EWS 88D
                        * TerraTec EWX 24/96
                        * TerraTec DMX 6Fire
923
			* TerraTec Phase 88
Linus Torvalds's avatar
Linus Torvalds committed
924 925 926
                        * Hoontech SoundTrack DSP 24
                        * Hoontech SoundTrack DSP 24 Value
                        * Hoontech SoundTrack DSP 24 Media 7.1
927
			* Event Electronics, EZ8
Linus Torvalds's avatar
Linus Torvalds committed
928
                        * Digigram VX442
929
			* Lionstracs, Mediastaton
930
			* Terrasoniq TS 88
Linus Torvalds's avatar
Linus Torvalds committed
931 932 933 934

    model       - Use the given board model, one of the following:
		  delta1010, dio2496, delta66, delta44, audiophile, delta410,
		  delta1010lt, vx442, ewx2496, ews88mt, ews88mt_new, ews88d,
935 936
		  dmx6fire, dsp24, dsp24_value, dsp24_71, ez8,
		  phase88, mediastation
Linus Torvalds's avatar
Linus Torvalds committed
937
    omni	- Omni I/O support for MidiMan M-Audio Delta44/66
938
    cs8427_timeout - reset timeout for the CS8427 chip (S/PDIF transceiver)
Linus Torvalds's avatar
Linus Torvalds committed
939 940
                     in msec resolution, default value is 500 (0.5 sec)

941
    This module supports multiple cards and autoprobe. Note: The consumer part
Linus Torvalds's avatar
Linus Torvalds committed
942 943 944
    is not used with all Envy24 based cards (for example in the MidiMan Delta
    serie).

945 946 947 948 949 950
    Note: The supported board is detected by reading EEPROM or PCI
	  SSID (if EEPROM isn't available).  You can override the
	  model by passing "model" module option in case that the
	  driver isn't configured properly or you want to try another
	  type for testing.

Linus Torvalds's avatar
Linus Torvalds committed
951 952 953
  Module snd-ice1724
  ------------------

954
    Module for Envy24HT (VT/ICE1724), Envy24PT (VT1720) based PCI sound cards.
955
			* MidiMan M Audio Revolution 5.1
Linus Torvalds's avatar
Linus Torvalds committed
956
			* MidiMan M Audio Revolution 7.1
957
			* MidiMan M Audio Audiophile 192
Linus Torvalds's avatar
Linus Torvalds committed
958
			* AMP Ltd AUDIO2000
959 960 961 962 963 964
			* TerraTec Aureon 5.1 Sky
			* TerraTec Aureon 7.1 Space
			* TerraTec Aureon 7.1 Universe
			* TerraTec Phase 22
			* TerraTec Phase 28
			* AudioTrak Prodigy 7.1
965 966 967 968
			* AudioTrak Prodigy 7.1 LT
			* AudioTrak Prodigy 7.1 XT
			* AudioTrak Prodigy 7.1 HIFI
			* AudioTrak Prodigy 7.1 HD2
969 970 971 972 973 974
			* AudioTrak Prodigy 192
			* Pontis MS300
			* Albatron K8X800 Pro II 
			* Chaintech ZNF3-150
			* Chaintech ZNF3-250
			* Chaintech 9CJS
975
			* Chaintech AV-710
976
			* Shuttle SN25P
977 978
			* Onkyo SE-90PCI
			* Onkyo SE-200PCI
979
			* ESI Juli@
980
			* ESI Maya44
981 982
			* Hercules Fortissimo IV
			* EGO-SYS WaveTerminal 192M
Linus Torvalds's avatar
Linus Torvalds committed
983 984

    model       - Use the given board model, one of the following:
985
		  revo51, revo71, amp2000, prodigy71, prodigy71lt,
986 987 988
		  prodigy71xt, prodigy71hifi, prodigyhd2, prodigy192,
		  juli, aureon51, aureon71, universe, ap192, k8x800,
		  phase22, phase28, ms300, av710, se200pci, se90pci,
989
		  fortissimo4, sn25p, WT192M, maya44
Linus Torvalds's avatar
Linus Torvalds committed
990

991
    This module supports multiple cards and autoprobe.
Linus Torvalds's avatar
Linus Torvalds committed
992

993 994 995 996 997 998
    Note: The supported board is detected by reading EEPROM or PCI
	  SSID (if EEPROM isn't available).  You can override the
	  model by passing "model" module option in case that the
	  driver isn't configured properly or you want to try another
	  type for testing.

999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022
  Module snd-indigo
  -----------------

    Module for Echoaudio Indigo

    This module supports multiple cards.
    The driver requires the firmware loader support on kernel.

  Module snd-indigodj
  -------------------

    Module for Echoaudio Indigo DJ

    This module supports multiple cards.
    The driver requires the firmware loader support on kernel.

  Module snd-indigoio
  -------------------

    Module for Echoaudio Indigo IO

    This module supports multiple cards.
    The driver requires the firmware loader support on kernel.

Linus Torvalds's avatar
Linus Torvalds committed
1023 1024 1025 1026 1027
  Module snd-intel8x0
  -------------------

    Module for AC'97 motherboards from Intel and compatibles.
			* Intel i810/810E, i815, i820, i830, i84x, MX440
1028
				ICH5, ICH6, ICH7, 6300ESB, ESB2
Linus Torvalds's avatar
Linus Torvalds committed
1029
			* SiS 7012 (SiS 735)
1030 1031
			* NVidia NForce, NForce2, NForce3, MCP04, CK804
				 CK8, CK8S, MCP501
Linus Torvalds's avatar
Linus Torvalds committed
1032 1033 1034 1035 1036
			* AMD AMD768, AMD8111
			* ALi m5455

    ac97_clock	  - AC'97 codec clock base (0 = auto-detect)
    ac97_quirk    - AC'97 workaround for strange hardware
Takashi Iwai's avatar
Takashi Iwai committed
1037
		    See "AC97 Quirk Option" section below.
Linus Torvalds's avatar
Linus Torvalds committed
1038
    buggy_irq     - Enable workaround for buggy interrupts on some
1039 1040 1041 1042 1043
                    motherboards (default yes on nForce chips,
		    otherwise off)
    buggy_semaphore - Enable workaround for hardwares with buggy
		    semaphores (e.g. on some ASUS laptops)
		    (default off)
1044 1045 1046
    spdif_aclink  - Use S/PDIF over AC-link instead of direct connection
		    from the controller chip
		    (0 = off, 1 = on, -1 = default)
Linus Torvalds's avatar
Linus Torvalds committed
1047

1048
    This module supports one chip and autoprobe.
Linus Torvalds's avatar
Linus Torvalds committed
1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063

    Note: the latest driver supports auto-detection of chip clock.
    if you still encounter too fast playback, specify the clock
    explicitly via the module option "ac97_clock=41194".

    Joystick/MIDI ports are not supported by this driver.  If your
    motherboard has these devices, use the ns558 or snd-mpu401
    modules, respectively.

    The power-management is supported.
    
  Module snd-intel8x0m
  --------------------

    Module for Intel ICH (i8x0) chipset MC97 modems.
1064 1065 1066 1067 1068 1069
			* Intel i810/810E, i815, i820, i830, i84x, MX440
				ICH5, ICH6, ICH7
			* SiS 7013 (SiS 735)
			* NVidia NForce, NForce2, NForce2s, NForce3
			* AMD AMD8111
			* ALi m5455
Linus Torvalds's avatar
Linus Torvalds committed
1070 1071 1072

    ac97_clock	  - AC'97 codec clock base (0 = auto-detect)

1073
    This module supports one card and autoprobe.
Linus Torvalds's avatar
Linus Torvalds committed
1074 1075 1076 1077

    Note: The default index value of this module is -2, i.e. the first
          slot is excluded.

1078 1079
    The power-management is supported.

Linus Torvalds's avatar
Linus Torvalds committed
1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090
  Module snd-interwave
  --------------------

    Module for Gravis UltraSound PnP, Dynasonic 3-D/Pro, STB Sound Rage 32
    and other sound cards based on AMD InterWave (tm) chip.
  
    joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
    midi	- 1 = MIDI UART enable, 0 = MIDI UART disable (default)
    pcm_voices	- reserved PCM voices for the synthesizer (default 2)
    effect	- 1 = InterWave effects enable (default 0);
                  requires 8 voices
1091 1092 1093 1094 1095 1096 1097 1098
    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)

    with isapnp=0, the following options are available:

    port	- port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260)
    irq		- IRQ # for InterWave chip (3,5,9,11,12,15)
    dma1	- DMA # for InterWave chip (0,1,3,5,6,7)
    dma2	- DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
Linus Torvalds's avatar
Linus Torvalds committed
1099

1100
    This module supports multiple cards, autoprobe and ISA PnP.
Linus Torvalds's avatar
Linus Torvalds committed
1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113

  Module snd-interwave-stb
  ------------------------

    Module for UltraSound 32-Pro (sound card from STB used by Compaq)
    and other sound cards based on AMD InterWave (tm) chip with TEA6330T
    circuit for extended control of bass, treble and master volume.
  
    joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
    midi	- 1 = MIDI UART enable, 0 = MIDI UART disable (default)
    pcm_voices	- reserved PCM voices for the synthesizer (default 2)
    effect	- 1 = InterWave effects enable (default 0);
                  requires 8 voices
1114 1115 1116 1117 1118 1119 1120 1121 1122
    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)

    with isapnp=0, the following options are available:

    port	- port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260)
    port_tc	- tone control (i2c bus) port # for TEA6330T chip (0x350,0x360,0x370,0x380)
    irq		- IRQ # for InterWave chip (3,5,9,11,12,15)
    dma1	- DMA # for InterWave chip (0,1,3,5,6,7)
    dma2	- DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
Linus Torvalds's avatar
Linus Torvalds committed
1123

1124
    This module supports multiple cards, autoprobe and ISA PnP.
Linus Torvalds's avatar
Linus Torvalds committed
1125

1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140
  Module snd-jazz16
  -------------------

    Module for Media Vision Jazz16 chipset. The chipset consists of 3 chips:
    MVD1216 + MVA416 + MVA514.

    port	- port # for SB DSP chip (0x210,0x220,0x230,0x240,0x250,0x260)
    irq		- IRQ # for SB DSP chip (3,5,7,9,10,15)
    dma8	- DMA # for SB DSP chip (1,3)
    dma16	- DMA # for SB DSP chip (5,7)
    mpu_port	- MPU-401 port # (0x300,0x310,0x320,0x330)
    mpu_irq	- MPU-401 irq # (2,3,5,7)

    This module supports multiple cards.

Linus Torvalds's avatar
Linus Torvalds committed
1141 1142 1143 1144 1145
  Module snd-korg1212
  -------------------

    Module for Korg 1212 IO PCI card

1146
    This module supports multiple cards.
Linus Torvalds's avatar
Linus Torvalds committed
1147

1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163
  Module snd-layla20
  ------------------

    Module for Echoaudio Layla20

    This module supports multiple cards.
    The driver requires the firmware loader support on kernel.

  Module snd-layla24
  ------------------

    Module for Echoaudio Layla24

    This module supports multiple cards.
    The driver requires the firmware loader support on kernel.

1164 1165 1166 1167 1168 1169 1170
  Module snd-lx6464es
  -------------------

    Module for Digigram LX6464ES boards

    This module supports multiple cards.

Linus Torvalds's avatar
Linus Torvalds committed
1171 1172 1173 1174 1175 1176 1177 1178 1179 1180
  Module snd-maestro3
  -------------------

    Module for Allegro/Maestro3 chips

    external_amp     - enable external amp (enabled by default)
    amp_gpio         - GPIO pin number for external amp (0-15) or
                       -1 for default pin (8 for allegro, 1 for
                       others) 

1181
    This module supports autoprobe and multiple chips.
Linus Torvalds's avatar
Linus Torvalds committed
1182 1183 1184 1185 1186 1187 1188 1189 1190

    Note: the binding of amplifier is dependent on hardware.
    If there is no sound even though all channels are unmuted, try to
    specify other gpio connection via amp_gpio option. 
    For example, a Panasonic notebook might need "amp_gpio=0x0d"
    option.

    The power-management is supported.

1191 1192 1193 1194 1195 1196 1197 1198
  Module snd-mia
  ---------------

    Module for Echoaudio Mia

    This module supports multiple cards.
    The driver requires the firmware loader support on kernel.

Martin Langer's avatar
Martin Langer committed
1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215
  Module snd-miro
  ---------------

    Module for Miro soundcards: miroSOUND PCM 1 pro, 
				miroSOUND PCM 12,
				miroSOUND PCM 20 Radio.

    port	- Port # (0x530,0x604,0xe80,0xf40)
    irq		- IRQ # (5,7,9,10,11)
    dma1	- 1st dma # (0,1,3)
    dma2	- 2nd dma # (0,1)
    mpu_port	- MPU-401 port # (0x300,0x310,0x320,0x330)
    mpu_irq	- MPU-401 irq # (5,7,9,10)
    fm_port	- FM Port # (0x388)
    wss		- enable WSS mode
    ide		- enable onboard ide support

Linus Torvalds's avatar
Linus Torvalds committed
1216 1217 1218 1219 1220
  Module snd-mixart
  -----------------

    Module for Digigram miXart8 sound cards.

1221
    This module supports multiple cards.
Linus Torvalds's avatar
Linus Torvalds committed
1222 1223 1224 1225 1226 1227 1228 1229 1230
    Note: One miXart8 board will be represented as 4 alsa cards.
          See MIXART.txt for details.

    When the driver is compiled as a module and the hotplug firmware
    is supported, the firmware data is loaded via hotplug automatically.
    Install the necessary firmware files in alsa-firmware package.
    When no hotplug fw loader is available, you need to load the
    firmware via mixartloader utility in alsa-tools package.

1231 1232 1233 1234 1235 1236 1237 1238
  Module snd-mona
  ---------------

    Module for Echoaudio Mona

    This module supports multiple cards.
    The driver requires the firmware loader support on kernel.

Linus Torvalds's avatar
Linus Torvalds committed
1239 1240 1241 1242 1243 1244 1245 1246 1247
  Module snd-mpu401
  -----------------

    Module for MPU-401 UART devices.

    port	- port number or -1 (disable)
    irq		- IRQ number or -1 (disable)
    pnp		- PnP detection - 0 = disable, 1 = enable (default)

1248
    This module supports multiple devices and PnP.
Linus Torvalds's avatar
Linus Torvalds committed
1249
    
1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297
  Module snd-msnd-classic
  -----------------------

    Module for Turtle Beach MultiSound Classic, Tahiti or Monterey
    soundcards.

    io		- Port # for msnd-classic card
    irq		- IRQ # for msnd-classic card
    mem		- Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000,
		  0xe0000 or 0xe8000)
    write_ndelay - enable write ndelay (default = 1)
    calibrate_signal - calibrate signal (default = 0)
    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
    digital	- Digital daughterboard present (default = 0)
    cfg		- Config port (0x250, 0x260 or 0x270) default = PnP
    reset	- Reset all devices
    mpu_io	- MPU401 I/O port
    mpu_irq	- MPU401 irq#
    ide_io0	- IDE port #0
    ide_io1	- IDE port #1
    ide_irq	- IDE irq#
    joystick_io	- Joystick I/O port

    The driver requires firmware files "turtlebeach/msndinit.bin" and
    "turtlebeach/msndperm.bin" in the proper firmware directory.

    See Documentation/sound/oss/MultiSound for important information
    about this driver.  Note that it has been discontinued, but the 
    Voyetra Turtle Beach knowledge base entry for it is still available
    at
	http://www.turtlebeach.com/site/kb_ftp/790.asp

  Module snd-msnd-pinnacle
  ------------------------

    Module for Turtle Beach MultiSound Pinnacle/Fiji soundcards.

    io		- Port # for pinnacle/fiji card
    irq		- IRQ # for pinnalce/fiji card
    mem		- Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000,
		  0xe0000 or 0xe8000)
    write_ndelay - enable write ndelay (default = 1)
    calibrate_signal - calibrate signal (default = 0)
    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)

    The driver requires firmware files "turtlebeach/pndspini.bin" and
    "turtlebeach/pndsperm.bin" in the proper firmware directory.

Linus Torvalds's avatar
Linus Torvalds committed
1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309
  Module snd-mtpav
  ----------------

    Module for MOTU MidiTimePiece AV multiport MIDI (on the parallel
    port).

    port	- I/O port # for MTPAV (0x378,0x278, default=0x378)
    irq		- IRQ # for MTPAV (7,5, default=7)
    hwports	- number of supported hardware ports, default=8.
    
    Module supports only 1 card.  This module has no enable option.

1310 1311 1312 1313 1314 1315 1316 1317
  Module snd-mts64
  ----------------

    Module for Ego Systems (ESI) Miditerminal 4140

    This module supports multiple devices.
    Requires parport (CONFIG_PARPORT).

Linus Torvalds's avatar
Linus Torvalds committed
1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329
  Module snd-nm256
  ----------------

    Module for NeoMagic NM256AV/ZX chips

    playback_bufsize - max playback frame size in kB (4-128kB)
    capture_bufsize  - max capture frame size in kB (4-128kB)
    force_ac97       - 0 or 1 (disabled by default)
    buffer_top       - specify buffer top address
    use_cache        - 0 or 1 (disabled by default)
    vaio_hack        - alias buffer_top=0x25a800
    reset_workaround - enable AC97 RESET workaround for some laptops
1330 1331
    reset_workaround2 - enable extended AC97 RESET workaround for some
		      other laptops
Linus Torvalds's avatar
Linus Torvalds committed
1332

1333
    This module supports one chip and autoprobe.
Linus Torvalds's avatar
Linus Torvalds committed
1334 1335 1336 1337 1338

    The power-management is supported.

    Note: on some notebooks the buffer address cannot be detected
    automatically, or causes hang-up during initialization.
1339 1340
    In such a case, specify the buffer top address explicitly via
    the buffer_top option.
Linus Torvalds's avatar
Linus Torvalds committed
1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353
    For example,
      Sony F250: buffer_top=0x25a800
      Sony F270: buffer_top=0x272800
    The driver supports only ac97 codec.  It's possible to force
    to initialize/use ac97 although it's not detected.  In such a
    case, use force_ac97=1 option - but *NO* guarantee whether it
    works!

    Note: The NM256 chip can be linked internally with non-AC97
    codecs.  This driver supports only the AC97 codec, and won't work
    with machines with other (most likely CS423x or OPL3SAx) chips,
    even though the device is detected in lspci.  In such a case, try
    other drivers, e.g. snd-cs4232 or snd-opl3sa2.  Some has ISA-PnP
Takashi Iwai's avatar
Takashi Iwai committed
1354
    but some doesn't have ISA PnP.  You'll need to specify isapnp=0
Linus Torvalds's avatar
Linus Torvalds committed
1355 1356 1357 1358 1359 1360 1361
    and proper hardware parameters in the case without ISA PnP.

    Note: some laptops need a workaround for AC97 RESET.  For the
    known hardware like Dell Latitude LS and Sony PCG-F305, this
    workaround is enabled automatically.  For other laptops with a
    hard freeze, you can try reset_workaround=1 option.

1362 1363 1364 1365 1366
    Note: Dell Latitude CSx laptops have another problem regarding
    AC97 RESET.  On these laptops, reset_workaround2 option is
    turned on as default.  This option is worth to try if the
    previous reset_workaround option doesn't help.

Linus Torvalds's avatar
Linus Torvalds committed
1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379
    Note: This driver is really crappy.  It's a porting from the
    OSS driver, which is a result of black-magic reverse engineering.
    The detection of codec will fail if the driver is loaded *after*
    X-server as described above.  You might be able to force to load
    the module, but it may result in hang-up.   Hence, make sure that
    you load this module *before* X if you encounter this kind of
    problem.

  Module snd-opl3sa2
  ------------------

    Module for Yamaha OPL3-SA2/SA3 sound cards.

1380 1381 1382 1383
    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)

    with isapnp=0, the following options are available:

Linus Torvalds's avatar
Linus Torvalds committed
1384 1385 1386 1387 1388 1389 1390 1391 1392
    port	- control port # for OPL3-SA chip (0x370)
    sb_port	- SB port # for OPL3-SA chip (0x220,0x240)
    wss_port	- WSS port # for OPL3-SA chip (0x530,0xe80,0xf40,0x604)
    midi_port	- port # for MPU-401 UART (0x300,0x330), -1 = disable
    fm_port	- FM port # for OPL3-SA chip (0x388), -1 = disable
    irq		- IRQ # for OPL3-SA chip (5,7,9,10)
    dma1	- first DMA # for Yamaha OPL3-SA chip (0,1,3)
    dma2	- second DMA # for Yamaha OPL3-SA chip (0,1,3), -1 = disable
    
1393
    This module supports multiple cards and ISA PnP.  It does not support
Linus Torvalds's avatar
Linus Torvalds committed
1394 1395 1396 1397 1398 1399 1400 1401 1402 1403
    autoprobe (if ISA PnP is not used) thus all ports must be specified!!!
    
    The power-management is supported.

  Module snd-opti92x-ad1848
  -------------------------

    Module for sound cards based on OPTi 82c92x and Analog Devices AD1848 chips.
    Module works with OAK Mozart cards as well.
    
1404 1405 1406 1407
    isapnp    - ISA PnP detection - 0 = disable, 1 = enable (default)

    with isapnp=0, the following options are available:

Linus Torvalds's avatar
Linus Torvalds committed
1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421
    port      - port # for WSS chip (0x530,0xe80,0xf40,0x604)
    mpu_port  - port # for MPU-401 UART (0x300,0x310,0x320,0x330)
    fm_port   - port # for OPL3 device (0x388)
    irq       - IRQ # for WSS chip (5,7,9,10,11)
    mpu_irq   - IRQ # for MPU-401 UART (5,7,9,10)
    dma1      - first DMA # for WSS chip (0,1,3)

    This module supports only one card, autoprobe and PnP.

  Module snd-opti92x-cs4231
  -------------------------

    Module for sound cards based on OPTi 82c92x and Crystal CS4231 chips.
    
1422 1423 1424 1425
    isapnp    - ISA PnP detection - 0 = disable, 1 = enable (default)

    with isapnp=0, the following options are available:

Linus Torvalds's avatar
Linus Torvalds committed
1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440
    port      - port # for WSS chip (0x530,0xe80,0xf40,0x604)
    mpu_port  - port # for MPU-401 UART (0x300,0x310,0x320,0x330)
    fm_port   - port # for OPL3 device (0x388)
    irq       - IRQ # for WSS chip (5,7,9,10,11)
    mpu_irq   - IRQ # for MPU-401 UART (5,7,9,10)
    dma1      - first DMA # for WSS chip (0,1,3)
    dma2      - second DMA # for WSS chip (0,1,3)

    This module supports only one card, autoprobe and PnP.

  Module snd-opti93x
  ------------------

    Module for sound cards based on OPTi 82c93x chips.
    
1441 1442 1443 1444
    isapnp    - ISA PnP detection - 0 = disable, 1 = enable (default)

    with isapnp=0, the following options are available:

Linus Torvalds's avatar
Linus Torvalds committed
1445 1446 1447 1448 1449 1450 1451 1452 1453 1454
    port      - port # for WSS chip (0x530,0xe80,0xf40,0x604)
    mpu_port  - port # for MPU-401 UART (0x300,0x310,0x320,0x330)
    fm_port   - port # for OPL3 device (0x388)
    irq       - IRQ # for WSS chip (5,7,9,10,11)
    mpu_irq   - IRQ # for MPU-401 UART (5,7,9,10)
    dma1      - first DMA # for WSS chip (0,1,3)
    dma2      - second DMA # for WSS chip (0,1,3)

    This module supports only one card, autoprobe and PnP.

1455 1456 1457 1458 1459 1460 1461 1462
  Module snd-oxygen
  -----------------

    Module for sound cards based on the C-Media CMI8788 chip:
    * Asound A-8788
    * AuzenTech X-Meridian
    * Bgears b-Enspirer
    * Club3D Theatron DTS
1463 1464
    * HT-Omega Claro (plus)
    * HT-Omega Claro halo (XT)
1465 1466 1467 1468 1469
    * Razer Barracuda AC-1
    * Sondigo Inferno

    This module supports autoprobe and multiple cards.

Stas Sergeev's avatar
Stas Sergeev committed
1470 1471 1472 1473 1474
  Module snd-pcsp
  -----------------

    Module for internal PC-Speaker.

Stas Sergeev's avatar
Stas Sergeev committed
1475
    nopcm	- Disable PC-Speaker PCM sound. Only beeps remain.
Stas Sergeev's avatar
Stas Sergeev committed
1476 1477 1478 1479 1480
    nforce_wa	- enable NForce chipset workaround. Expect bad sound.

    This module supports system beeps, some kind of PCM playback and
    even a few mixer controls.

Markus Bollinger's avatar
Markus Bollinger committed
1481 1482 1483 1484 1485 1486 1487
  Module snd-pcxhr
  ----------------

    Module for Digigram PCXHR boards

    This module supports multiple cards.

1488 1489 1490 1491 1492 1493 1494
  Module snd-portman2x4
  ---------------------

    Module for Midiman Portman 2x4 parallel port MIDI interface

    This module supports multiple cards.

Linus Torvalds's avatar
Linus Torvalds committed
1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507
  Module snd-powermac (on ppc only)
  ---------------------------------

    Module for PowerMac, iMac and iBook on-board soundchips

    enable_beep     - enable beep using PCM (enabled as default)

    Module supports autoprobe a chip.

    Note: the driver may have problems regarding endianess.

    The power-management is supported.

1508 1509 1510 1511 1512 1513 1514
  Module snd-pxa2xx-ac97 (on arm only)
  ------------------------------------

    Module for AC97 driver for the Intel PXA2xx chip

    For ARM architecture only.

1515 1516
    The power-management is supported.

1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530
  Module snd-riptide
  ------------------

    Module for Conexant Riptide chip

      joystick_port	- Joystick port # (default: 0x200)
      mpu_port		- MPU401 port # (default: 0x330)
      opl3_port		- OPL3 port # (default: 0x388)

    This module supports multiple cards.
    The driver requires the firmware loader support on kernel.
    You need to install the firmware file "riptide.hex" to the standard
    firmware path (e.g. /lib/firmware).

Linus Torvalds's avatar
Linus Torvalds committed
1531 1532 1533 1534 1535 1536
  Module snd-rme32
  ----------------

    Module for RME Digi32, Digi32 Pro and Digi32/8 (Sek'd Prodif32, 
    Prodif96 and Prodif Gold) sound cards.

1537
    This module supports multiple cards.
Linus Torvalds's avatar
Linus Torvalds committed
1538 1539 1540 1541 1542 1543

  Module snd-rme96
  ----------------

    Module for RME Digi96, Digi96/8 and Digi96/8 PRO/PAD/PST sound cards.

1544
    This module supports multiple cards.
Linus Torvalds's avatar
Linus Torvalds committed
1545 1546 1547 1548 1549 1550 1551 1552 1553

  Module snd-rme9652
  ------------------

    Module for RME Digi9652 (Hammerfall, Hammerfall-Light) sound cards.

    precise_ptr	- Enable precise pointer (doesn't work reliably).
		  (default = 0)

1554
    This module supports multiple cards.
Linus Torvalds's avatar
Linus Torvalds committed
1555 1556 1557 1558 1559

    Note: snd-page-alloc module does the job which snd-hammerfall-mem
          module did formerly.  It will allocate the buffers in advance
          when any RME9652 cards are found.  To make the buffer
          allocation sure, load snd-page-alloc module in the early
1560 1561
          stage of boot sequence.  See "Early Buffer Allocation"
	  section.
Linus Torvalds's avatar
Linus Torvalds committed
1562 1563 1564 1565 1566 1567 1568 1569 1570

  Module snd-sa11xx-uda1341 (on arm only)
  ---------------------------------------

    Module for Philips UDA1341TS on Compaq iPAQ H3600 sound card.

    Module supports only one card.
    Module has no enable and index options.

1571 1572
    The power-management is supported.

Linus Torvalds's avatar
Linus Torvalds committed
1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583
  Module snd-sb8
  --------------

    Module for 8-bit SoundBlaster cards: SoundBlaster 1.0,
					 SoundBlaster 2.0,
					 SoundBlaster Pro

    port	- port # for SB DSP chip (0x220,0x240,0x260)
    irq		- IRQ # for SB DSP chip (5,7,9,10)
    dma8	- DMA # for SB DSP chip (1,3)

1584
    This module supports multiple cards and autoprobe.
Linus Torvalds's avatar
Linus Torvalds committed
1585
    
1586 1587
    The power-management is supported.

Linus Torvalds's avatar
Linus Torvalds committed
1588 1589 1590 1591 1592 1593 1594
  Module snd-sb16 and snd-sbawe
  -----------------------------

    Module for 16-bit SoundBlaster cards: SoundBlaster 16 (PnP),
					  SoundBlaster AWE 32 (PnP),
					  SoundBlaster AWE 64 PnP

1595 1596 1597 1598 1599 1600
    mic_agc	- Mic Auto-Gain-Control - 0 = disable, 1 = enable (default)
    csp		- ASP/CSP chip support - 0 = disable (default), 1 = enable
    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)

    with isapnp=0, the following options are available:

Linus Torvalds's avatar
Linus Torvalds committed
1601 1602 1603 1604 1605 1606 1607 1608
    port	- port # for SB DSP 4.x chip (0x220,0x240,0x260)
    mpu_port	- port # for MPU-401 UART (0x300,0x330), -1 = disable
    awe_port	- base port # for EMU8000 synthesizer (0x620,0x640,0x660)
                   (snd-sbawe module only)
    irq		- IRQ # for SB DSP 4.x chip (5,7,9,10)
    dma8	- 8-bit DMA # for SB DSP 4.x chip (0,1,3)
    dma16	- 16-bit DMA # for SB DSP 4.x chip (5,6,7)
    
1609
    This module supports multiple cards, autoprobe and ISA PnP.
Linus Torvalds's avatar
Linus Torvalds committed
1610 1611 1612 1613 1614 1615 1616

    Note: To use Vibra16X cards in 16-bit half duplex mode, you must
          disable 16bit DMA with dma16 = -1 module parameter.
          Also, all Sound Blaster 16 type cards can operate in 16-bit
          half duplex mode through 8-bit DMA channel by disabling their
          16-bit DMA channel.
    
1617 1618
    The power-management is supported.

1619 1620 1621
  Module snd-sc6000
  -----------------

1622 1623
    Module for Gallant SC-6000 soundcard and later models: SC-6600
    and SC-7000.
1624 1625 1626 1627

    port	- Port # (0x220 or 0x240)
    mss_port	- MSS Port # (0x530 or 0xe80)
    irq		- IRQ # (5,7,9,10,11)
1628
    mpu_irq	- MPU-401 IRQ # (5,7,9,10) ,0 - no MPU-401 irq
1629
    dma		- DMA # (1,3,0)
1630
    joystick	- Enable gameport - 0 = disable (default), 1 = enable
1631 1632 1633 1634 1635

    This module supports multiple cards.

    This card is also known as Audio Excel DSP 16 or Zoltrix AV302.

Linus Torvalds's avatar
Linus Torvalds committed
1636 1637 1638 1639 1640 1641 1642 1643 1644 1645
  Module snd-sgalaxy
  ------------------

    Module for Aztech Sound Galaxy sound card.

    sbport	- Port # for SB16 interface (0x220,0x240)
    wssport	- Port # for WSS interface (0x530,0xe80,0xf40,0x604)
    irq		- IRQ # (7,9,10,11)
    dma1	- DMA #

1646