xfree86: Implement a test input driver

Signed-off-by: Povilas Kanapickas <povilas@radix.lt>

configure.ac

@@ -585,6 +585,7 @@ AC_ARG_WITH(xwayland-path, AS_HELP_STRING([--with-xwayland-path=PATH], [Director
 AC_ARG_ENABLE(standalone-xpbproxy, AS_HELP_STRING([--enable-standalone-xpbproxy], [Build a standalone xpbproxy (in addition to the one integrated into Xquartz as a separate thread) (default: no)]), [STANDALONE_XPBPROXY=$enableval], [STANDALONE_XPBPROXY=no])
 AC_ARG_ENABLE(xwin,    	      AS_HELP_STRING([--enable-xwin], [Build XWin server (default: auto)]), [XWIN=$enableval], [XWIN=auto])
 AC_ARG_ENABLE(glamor,         AS_HELP_STRING([--enable-glamor], [Build glamor dix module (default: auto)]), [GLAMOR=$enableval], [GLAMOR=auto])
+AC_ARG_ENABLE(xf86-input-inputtest, AS_HELP_STRING([--enable-xf86-input-inputtest], [Build Xorg test input driver (default: yes)]), [XORG_DRIVER_INPUT_INPUTTEST=$enableval], [XORG_DRIVER_INPUT_INPUTTEST=yes])
 dnl kdrive and its subsystems
 AC_ARG_ENABLE(kdrive,         AS_HELP_STRING([--enable-kdrive], [Build kdrive servers (default: no)]), [KDRIVE=$enableval], [KDRIVE=no])
 AC_ARG_ENABLE(xephyr,         AS_HELP_STRING([--enable-xephyr], [Build the kdrive Xephyr server (default: auto)]), [XEPHYR=$enableval], [XEPHYR=auto])
@@ -2019,6 +2020,7 @@ AM_CONDITIONAL([SOLARIS_VT], [test "x$solaris_vt" = xyes])
 AM_CONDITIONAL([DGA], [test "x$DGA" = xyes])
 AM_CONDITIONAL([XORG_BUS_PLATFORM], [test "x$CONFIG_UDEV_KMS" = xyes])
 AM_CONDITIONAL([XORG_DRIVER_MODESETTING], [test "x$XORG_DRIVER_MODESETTING" = xyes])
+AM_CONDITIONAL([XORG_DRIVER_INPUT_INPUTTEST], [test "x$XORG_DRIVER_INPUT_INPUTTEST" = xyes])
 
 dnl glamor
 if test "x$GLAMOR" = xauto; then
@@ -2458,6 +2460,7 @@ hw/xfree86/dri/Makefile
 hw/xfree86/dri2/Makefile
 hw/xfree86/dri2/pci_ids/Makefile
 hw/xfree86/drivers/Makefile
+hw/xfree86/drivers/inputtest/Makefile
 hw/xfree86/drivers/modesetting/Makefile
 hw/xfree86/exa/Makefile
 hw/xfree86/exa/man/Makefile

hw/xfree86/drivers/Makefile.am

@@ -3,3 +3,6 @@ SUBDIRS =
 if XORG_DRIVER_MODESETTING
 SUBDIRS += modesetting
 endif
+if XORG_DRIVER_INPUT_INPUTTEST
+SUBDIRS += inputtest
+endif

hw/xfree86/drivers/inputtest/Makefile.am

+#  Copyright 2005 Adam Jackson.
+#
+#  Permission is hereby granted, free of charge, to any person obtaining a
+#  copy of this software and associated documentation files (the "Software"),
+#  to deal in the Software without restriction, including without limitation
+#  on the rights to use, copy, modify, merge, publish, distribute, sub
+#  license, and/or sell copies of the Software, and to permit persons to whom
+#  the Software is furnished to do so, subject to the following conditions:
+#
+#  The above copyright notice and this permission notice (including the next
+#  paragraph) shall be included in all copies or substantial portions of the
+#  Software.
+#
+#  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+#  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+#  FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.  IN NO EVENT SHALL
+#  ADAM JACKSON BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+#  IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+#  CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+# this is obnoxious:
+# -module lets us name the module exactly how we want
+# -avoid-version prevents gratuitous .0.0.0 version numbers on the end
+# _ladir passes a dummy rpath to libtool so the thing will actually link
+# TODO: -nostdlib/-Bstatic/-lgcc platform magic, not installing the .a, etc.
+
+include $(top_srcdir)/manpages.am
+
+AM_CFLAGS = $(DIX_CFLAGS) $(XORG_CFLAGS) $(CWARNFLAGS)
+
+AM_CPPFLAGS = $(XORG_INCS)
+
+inputtest_drv_la_LTLIBRARIES = inputtest_drv.la
+inputtest_drv_la_LDFLAGS = -module -avoid-version
+inputtest_drv_ladir = @moduledir@/input
+
+inputtest_drv_la_SOURCES = xf86-input-inputtest.c xf86-input-inputtest-protocol.h
+
+sdk_HEADERS = xf86-input-inputtest-protocol.h
+
+drivermandir = $(DRIVER_MAN_DIR)
+driverman_PRE = inputtestdrv.man
+driverman_DATA = $(driverman_PRE:man=@DRIVER_MAN_SUFFIX@)
+
+EXTRA_DIST = inputtestdrv.man
+
+CLEANFILES = $(driverman_DATA)
+

hw/xfree86/drivers/inputtest/inputtestdrv.man

+.\" shorthand for double quote that works everywhere.
+.ds q \N'34'
+.TH INPUTTEST __drivermansuffix__ __vendorversion__
+.SH NAME
+inputtest \- An X.Org input driver for testing
+.SH SYNOPSIS
+.nf
+.B "Section \*qInputDevice\*q"
+.BI "  Identifier \*q" devname \*q
+.B  "  Driver \*qinputtest\*q"
+.BI "  Option \*qSocketPath\*q   \*q" path \*q
+\ \ ...
+.B EndSection
+.fi
+
+.SH DESCRIPTION
+.B inputtest
+is an Xorg input driver that passes events received over a socket on to the
+server as input events. It supports the full set of the xf86 driver APIs
+exposed by Xorg. The primary use cases of this input driver are various
+integration tests that need to interface with the input subsystem.
+
+.SH CONFIGURATION DETAILS
+Please refer to __xconfigfile__(__filemansuffix__) for general configuration
+details and for options that can be used with all input drivers.  This
+section only covers configuration details specific to this driver.
+.PP
+External process can communicate with the input driver via a named socket that
+is created after the driver is initialized. The paths to the socket is passed
+via input driver options.
+.PP
+The following driver
+.B Options
+are supported:
+.TP 7
+.BI "Option \*qSocketPath\*q \*q" string \*q
+Sets the path where the driver will create a named socket. Any existing file
+at that location will be removed.
+.TP 7
+.BI "Option \*qDeviceType\*q \*q" string \*q
+Sets the type of the device to be emulated.
+.IP
+.BI Keyboard
+Initializes a keyboard device.
+.IP
+.BI Pointer
+Initializes a relative-mode pointer device. It will have four valuators -
+a "Rel X" valuator at axis 0 and a "Rel Y" valuator at axis 1.
+A horizontal scroll valuator will be set up at axis 2.
+A vertical scroll valuator will be set up at axis 3.
+.IP
+.BI PointerAbsolute
+Initializes an absolute-mode pointer device. It will have four valuators -
+an "Abs X" valuator at axis 0 and an "Abs Y" valuator at axis 1.
+A horizontal scroll valuator will be set up at axis 2.
+A vertical scroll valuator will be set up at axis 3.
+.IP
+.BI PointerAbsoluteProximity
+Initializes an absolute-mode pointer device with proximity support.
+The valuators are initialized in the same way as for \fBPointerAbsolute\fR type.
+.IP
+.BI Touch
+Initializes a touch device.
+It will have 3 valuators: an "Abs MT Position X" at axis 0,
+an "Abs MT Position Y" valuator at axis 1 and an "Abs MT Pressure" valuator
+at axis 2.
+.TP 7
+.BI "Option \*qTouchCount\*q \*q" int \*q
+Sets the maximum number of simultaneous touches for touch devices.
+.TP 7
+.BI "Option \*qPointerButtonCount\*q \*q" int \*q
+Sets the maximum number of buttons in pointer devices.
+
+.SH INTERFACE WITH THE DRIVER
+The communication with the driver is a binary protocol defined in
+include/xf86-input-inputtest-protocol.h
+.PP
+At the beginning, the client process that communicates with the driver must
+connect to the socket that is created by the driver at SocketPath.
+Once the connection is established, it must write a xf86ITEventClientVersion
+event and read a xf86ITResponseServerVersion response where the driver
+specifies the protocol version supported by it. If this version is lower than
+requested by the client, then the driver will disconnect.
+.PP
+After receiving xf86ITResponseServerVersion message the client may send events
+to the driver. Each event is an instance of one of the
+.BI xf86ITEvent*
+structs. The length field defines the full length of the struct in bytes and
+the event field defines the type of the struct.
+.PP
+The responses from the server follow the same structure. Each response is an
+instance of one of the
+.BI xf86ITResponse*
+structs. The length field defines the full length of the struct in bytes and
+the event field defines the type of the struct.
+.PP
+The synchronization with Xorg is performed via
+.BI xf86ITEventWaitForSync
+event. After sending such event, the client must read of a
+.BI xf86ITResponseSyncFinished event from the socket without sending additional
+events. The completion of the read operation indicates that Xorg has fully
+processed all input events sent to it so far.
+
+.SH AUTHORS
+Povilas Kanapickas <povilas@radix.lt>
+.SH "SEE ALSO"
+__xservername__(__appmansuffix__), __xconfigfile__(__filemansuffix__), Xserver(__appmansuffix__), X(__miscmansuffix__)

hw/xfree86/drivers/inputtest/meson.build

+inputtestdrv_srcs = [
+    'xf86-input-inputtest.c',
+]
+
+shared_module(
+    'inputtest_drv',
+    inputtestdrv_srcs,
+    name_prefix: '',
+
+    include_directories: [inc, xorg_inc],
+    c_args: xorg_c_args,
+    dependencies: [common_dep],
+
+    install: true,
+    install_dir: join_paths(module_dir, 'input'),
+)
+
+install_man(configure_file(
+    input: 'inputtestdrv.man',
+    output: 'inputtestdrv.4',
+    configuration: manpage_config,
+))
+
+install_data('xf86-input-inputtest-protocol.h', install_dir: xorgsdkdir)

hw/xfree86/drivers/inputtest/xf86-input-inputtest-protocol.h

+/*
+ * Copyright © 2020 Povilas Kanapickas <povilas@radix.lt>
+ *
+ * Permission to use, copy, modify, distribute, and sell this software
+ * and its documentation for any purpose is hereby granted without
+ * fee, provided that the above copyright notice appear in all copies
+ * and that both that copyright notice and this permission notice
+ * appear in supporting documentation, and that the name of Red Hat
+ * not be used in advertising or publicity pertaining to distribution
+ * of the software without specific, written prior permission.  Red
+ * Hat makes no representations about the suitability of this software
+ * for any purpose.  It is provided "as is" without express or implied
+ * warranty.
+ *
+ * THE AUTHORS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
+ * OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+ * NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef XF86_INPUT_INPUTTEST_PROTOCOL_H_
+#define XF86_INPUT_INPUTTEST_PROTOCOL_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+#define XF86IT_PROTOCOL_VERSION_MAJOR 1
+#define XF86IT_PROTOCOL_VERSION_MINOR 0
+
+enum xf86ITResponseType {
+    XF86IT_RESPONSE_SERVER_VERSION,
+    XF86IT_RESPONSE_SYNC_FINISHED,
+};
+
+typedef struct {
+    uint32_t length; /* length of the whole event in bytes, including the header */
+    enum xf86ITResponseType type;
+} xf86ITResponseHeader;
+
+typedef struct {
+    xf86ITResponseHeader header;
+    uint16_t major;
+    uint16_t minor;
+} xf86ITResponseServerVersion;
+
+typedef struct {
+    xf86ITResponseHeader header;
+} xf86ITResponseSyncFinished;
+
+typedef union {
+    xf86ITResponseHeader header;
+    xf86ITResponseServerVersion version;
+} xf86ITResponseAny;
+
+/* We care more about preserving the binary input driver protocol more than the
+   size of the messages, so hardcode a larger valuator count than the server has */
+#define XF86IT_MAX_VALUATORS 64
+
+enum xf86ITEventType {
+    XF86IT_EVENT_CLIENT_VERSION,
+    XF86IT_EVENT_WAIT_FOR_SYNC,
+    XF86IT_EVENT_MOTION,
+    XF86IT_EVENT_PROXIMITY,
+    XF86IT_EVENT_BUTTON,
+    XF86IT_EVENT_KEY,
+    XF86IT_EVENT_TOUCH,
+};
+
+typedef struct {
+    uint32_t length; /* length of the whole event in bytes, including the header */
+    enum xf86ITEventType type;
+} xf86ITEventHeader;
+
+typedef struct {
+    uint32_t has_unaccelerated;
+    uint8_t mask[(XF86IT_MAX_VALUATORS + 7) / 8];
+    double valuators[XF86IT_MAX_VALUATORS];
+    double unaccelerated[XF86IT_MAX_VALUATORS];
+} xf86ITValuatorData;
+
+typedef struct {
+    xf86ITEventHeader header;
+    uint16_t major;
+    uint16_t minor;
+} xf86ITEventClientVersion;
+
+typedef struct {
+    xf86ITEventHeader header;
+} xf86ITEventWaitForSync;
+
+typedef struct {
+    xf86ITEventHeader header;
+    uint32_t is_absolute;
+    xf86ITValuatorData valuators;
+} xf86ITEventMotion;
+
+typedef struct {
+    xf86ITEventHeader header;
+    uint32_t is_prox_in;
+    xf86ITValuatorData valuators;
+} xf86ITEventProximity;
+
+typedef struct {
+    xf86ITEventHeader header;
+    int32_t is_absolute;
+    int32_t button;
+    uint32_t is_press;
+    xf86ITValuatorData valuators;
+} xf86ITEventButton;
+
+typedef struct {
+    xf86ITEventHeader header;
+    int32_t key_code;
+    uint32_t is_press;
+} xf86ITEventKey;
+
+typedef struct {
+    xf86ITEventHeader header;
+    uint32_t touchid;
+    uint32_t touch_type;
+    xf86ITValuatorData valuators;
+} xf86ITEventTouch;
+
+typedef union {
+    xf86ITEventHeader header;
+    xf86ITEventClientVersion version;
+    xf86ITEventMotion motion;
+    xf86ITEventProximity proximity;
+    xf86ITEventButton button;
+    xf86ITEventKey key;
+    xf86ITEventTouch touch;
+} xf86ITEventAny;
+
+#ifdef __cplusplus
+} /* extern "C" */
+#endif
+
+#endif /* XF86_INPUT_INPUTTEST_PROTOCOL_H_ */

hw/xfree86/meson.build

@@ -133,6 +133,9 @@ endif
 if build_modesetting
    subdir('drivers/modesetting')
 endif
+if get_option('xf86-input-inputtest')
+    subdir('drivers/inputtest')
+endif
 
 if get_option('suid_wrapper')
     executable('Xorg.wrap',

meson_options.txt

@@ -107,6 +107,8 @@ option('agp', type: 'combo', choices: ['true', 'false', 'auto'], value: 'auto',
        description: 'AGP support')
 option('sha1', type: 'combo', choices: ['libc', 'CommonCrypto', 'CryptoAPI', 'libmd', 'libsha1', 'libnettle', 'libgcrypt', 'libcrypto', 'auto'], value: 'auto',
        description: 'SHA1 implementation')
+option('xf86-input-inputtest', type: 'boolean', value: true,
+       description: 'Test input driver support on Xorg')
 
 option('dri1', type: 'combo', choices: ['true', 'false', 'auto'], value: 'auto', description: 'Build DRI1 extension (default: auto)')
 option('dri2', type: 'combo', choices: ['true', 'false', 'auto'], value: 'auto', description: 'Build DRI2 extension (default: auto)')