Commit e865da20 authored by Joe Rayhawk's avatar Joe Rayhawk
Browse files

MultiMonitorDesktop: correction to preformatted text conversion

parent cf7143a9
......@@ -50,72 +50,70 @@ You may try to use `ZaphodHeads` to split a dual-head card into separate SCREENs
It has been confirmed by a number of people that multicard setup (two cards driving three or four monitors) works fine with nouveau. The following is a simplified example that with a few minor edit should just should work
[[!format txt """
Section "ServerLayout"
Identifier "Layout0"
Option "Xinerama" "on"
Option "Clone" "off"
# You would need one screen for each monitor
Screen 0 "Screen0"
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" LeftOf "Screen0"
Screen 3 "Screen3" LeftOf "Screen2"
EndSection
Section "Device"
Identifier "Device0"
Driver "nouveau"
# Actual PCI location of first card/gpu
BusID "PCI:9:0:0"
# Actual connector - as reported by /sys/class/drm/card0-xx
Option "ZaphodHeads" "DVI-0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nouveau"
# Actual PCI location of first card/gpu
BusID "PCI:9:0:0"
# Actual connector - as reported by /sys/class/drm/card0-xx
Option "ZaphodHeads" "DVI-1"
Screen 1
EndSection
Section "Device"
Identifier "Device2"
Driver "nouveau"
# Actual PCI location of second card/gpu
BusID "PCI:8:0:0"
# Actual connector - as reported by /sys/class/drm/card1-xx
Option "ZaphodHeads" "DVI-2"
Screen 0
EndSection
Section "Device"
Identifier "Device3"
Driver "nouveau"
# Actual PCI location of second card/gpu
BusID "PCI:8:0:0"
# Actual connector - as reported by /sys/class/drm/card1-xx
Option "ZaphodHeads" "DVI-3"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
EndSection
Section "Screen"
Identifier "Screen2"
Device "Device2"
EndSection
Section "Screen"
Identifier "Screen3"
Device "Device3"
EndSection
"""]]
Section "ServerLayout"
Identifier "Layout0"
Option "Xinerama" "on"
Option "Clone" "off"
# You would need one screen for each monitor
Screen 0 "Screen0"
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" LeftOf "Screen0"
Screen 3 "Screen3" LeftOf "Screen2"
EndSection
Section "Device"
Identifier "Device0"
Driver "nouveau"
# Actual PCI location of first card/gpu
BusID "PCI:9:0:0"
# Actual connector - as reported by /sys/class/drm/card0-xx
Option "ZaphodHeads" "DVI-0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nouveau"
# Actual PCI location of first card/gpu
BusID "PCI:9:0:0"
# Actual connector - as reported by /sys/class/drm/card0-xx
Option "ZaphodHeads" "DVI-1"
Screen 1
EndSection
Section "Device"
Identifier "Device2"
Driver "nouveau"
# Actual PCI location of second card/gpu
BusID "PCI:8:0:0"
# Actual connector - as reported by /sys/class/drm/card1-xx
Option "ZaphodHeads" "DVI-2"
Screen 0
EndSection
Section "Device"
Identifier "Device3"
Driver "nouveau"
# Actual PCI location of second card/gpu
BusID "PCI:8:0:0"
# Actual connector - as reported by /sys/class/drm/card1-xx
Option "ZaphodHeads" "DVI-3"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
EndSection
Section "Screen"
Identifier "Screen2"
Device "Device2"
EndSection
Section "Screen"
Identifier "Screen3"
Device "Device3"
EndSection
## The future
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment