Commit 6725359a authored by imirkin's avatar imirkin Committed by nouveau
Browse files

change order of module parameters to list the more important ones first

parent 7896072b
......@@ -4,31 +4,13 @@
Specify `nouveau.perflvl_wr=7777` in order to be able to switch performance levels at runtime via `/sys/class/drm/cardN/device/performance_level`. You can also specify `nouveau.perflvl=N` to switch to a specific performance level on boot.
### `tv_norm`
Default TV norm. Default is PAL. Valid values: PAL, PAL-M, PAL-N, PAL-Nc, NTSC-M, NTSC-J, hd480i, hd480p, hd576i, hd576p, hd720p, hd1080i.
This only applies to cards that don't have external encoders.
### `tv_disable`
Disable TV-out detection
### `ignore_lid`
Ignore ACPI lid status
### `duallink`
Allow dual-link TMDS (on by default)
### `agpmode`
### `noaccel`
AGP mode, 0 to disable AGP
Disable kernel/abi16 acceleration
### `vram_pushbuf`
### `modeset`
Create DMA push buffers in VRAM
Whether the driver should be enabled. 0 for disabled, 1 for enabled, 2 for headless
### `config`
......@@ -47,14 +29,32 @@ This provides a way to configure various parts of the driver, it is a comma-sepa
This works just like the config option, but the values are all debug levels (one of `fatal, error, warn, info, debug, trace, paranoia, spam`). Note that in order for a debug level to work, `CONFIG_NOUVEAU_DEBUG` must be set to at least that level.
* `CLIENT`: debuglevel (one of `fatal, error, warn, info, debug, trace, paranoia, spam`)
* $subdev: debuglevel (e.g. PDISP=debug)
* `DEVICE`: debuglevel
* `CLIENT`
* $subdev (e.g. PDISP=debug)
* `DEVICE`
### `noaccel`
### `agpmode`
Disable kernel/abi16 acceleration
AGP mode, 0 to disable AGP
### `modeset`
### `vram_pushbuf`
Whether the driver should be enabled. 0 for disabled, 1 for enabled, 2 for headless
Create DMA push buffers in VRAM
### `ignore_lid`
Ignore ACPI lid status
### `duallink`
Allow dual-link TMDS (on by default)
### `tv_norm`
Default TV norm. Default is PAL. Valid values: PAL, PAL-M, PAL-N, PAL-Nc, NTSC-M, NTSC-J, hd480i, hd480p, hd576i, hd576p, hd720p, hd1080i.
This only applies to cards that don't have external encoders.
### `tv_disable`
Disable TV-out detection
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment