diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 23b089a2103de37125d687396bd6eaa4c91b9ed9..7299ccb82e85066465b14626e76071f1ae1e654f 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -87,53 +87,6 @@ config DRM_PANEL_BOE_TV101WUM_NL6 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 45NA WUXGA PANEL DSI Video Mode panel -config DRM_PANEL_DSI_CM - tristate "Generic DSI command mode panels" - depends on OF - depends on DRM_MIPI_DSI - depends on BACKLIGHT_CLASS_DEVICE - help - DRM panel driver for DSI command mode panels with support for - embedded and external backlights. - -config DRM_PANEL_LVDS - tristate "Generic LVDS panel driver" - depends on OF - depends on BACKLIGHT_CLASS_DEVICE - select VIDEOMODE_HELPERS - help - This driver supports LVDS panels that don't require device-specific - handling of power supplies or control signals. It implements automatic - backlight handling if the panel is attached to a backlight controller. - -config DRM_PANEL_SIMPLE - tristate "support for simple panels (other than eDP ones)" - depends on OF - depends on BACKLIGHT_CLASS_DEVICE - depends on PM - select VIDEOMODE_HELPERS - help - DRM panel driver for dumb non-eDP panels that need at most a regulator - and a GPIO to be powered up. Optionally a backlight can be attached so - that it can be automatically turned off when the panel goes into a - low power state. - -config DRM_PANEL_EDP - tristate "support for simple Embedded DisplayPort panels" - depends on OF - depends on BACKLIGHT_CLASS_DEVICE - depends on PM - select VIDEOMODE_HELPERS - select DRM_DISPLAY_DP_HELPER - select DRM_DISPLAY_HELPER - select DRM_DP_AUX_BUS - select DRM_KMS_HELPER - help - DRM panel driver for dumb eDP panels that need at most a regulator and - a GPIO to be powered up. Optionally a backlight can be attached so - that it can be automatically turned off when the panel goes into a - low power state. - config DRM_PANEL_EBBG_FT8719 tristate "EBBG FT8719 panel driver" depends on OF @@ -173,6 +126,25 @@ config DRM_PANEL_FEIYANG_FY07024DI26A30D Say Y if you want to enable support for panels based on the Feiyang FY07024DI26A30-D MIPI-DSI interface. +config DRM_PANEL_DSI_CM + tristate "Generic DSI command mode panels" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + DRM panel driver for DSI command mode panels with support for + embedded and external backlights. + +config DRM_PANEL_LVDS + tristate "Generic LVDS panel driver" + depends on OF + depends on BACKLIGHT_CLASS_DEVICE + select VIDEOMODE_HELPERS + help + This driver supports LVDS panels that don't require device-specific + handling of power supplies or control signals. It implements automatic + backlight handling if the panel is attached to a backlight controller. + config DRM_PANEL_HIMAX_HX8394 tristate "HIMAX HX8394 MIPI-DSI LCD panels" depends on OF @@ -262,17 +234,6 @@ config DRM_PANEL_JADARD_JD9365DA_H3 WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with 800RGBx1280 dots at maximum. -config DRM_PANEL_JDI_LT070ME05000 - tristate "JDI LT070ME05000 WUXGA DSI panel" - depends on OF - depends on DRM_MIPI_DSI - depends on BACKLIGHT_CLASS_DEVICE - help - Say Y here if you want to enable support for JDI DSI video mode - panel as found in Google Nexus 7 (2013) devices. - The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses - 24 bit per pixel. - config DRM_PANEL_JDI_LPM102A188A tristate "JDI LPM102A188A DSI panel" depends on OF && GPIOLIB @@ -284,6 +245,17 @@ config DRM_PANEL_JDI_LPM102A188A The panel has a 2560×1800 resolution. It provides a MIPI DSI interface to the host. +config DRM_PANEL_JDI_LT070ME05000 + tristate "JDI LT070ME05000 WUXGA DSI panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for JDI DSI video mode + panel as found in Google Nexus 7 (2013) devices. + The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses + 24 bit per pixel. + config DRM_PANEL_JDI_R63452 tristate "JDI R63452 Full HD DSI panel" depends on OF @@ -337,12 +309,6 @@ config DRM_PANEL_LEADTEK_LTK500HD1829 24 bit RGB per pixel. It provides a MIPI DSI interface to the host and has a built-in LED backlight. -config DRM_PANEL_SAMSUNG_LD9040 - tristate "Samsung LD9040 RGB/SPI panel" - depends on OF && SPI - depends on BACKLIGHT_CLASS_DEVICE - select VIDEOMODE_HELPERS - config DRM_PANEL_LG_LB035Q02 tristate "LG LB035Q024573 RGB panel" depends on GPIOLIB && OF && SPI @@ -370,6 +336,17 @@ config DRM_PANEL_MAGNACHIP_D53E6EA8966 with the Magnachip D53E6EA8966 panel IC. This panel receives video data via DSI but commands via 9-bit SPI using DBI. +config DRM_PANEL_MANTIX_MLAF057WE51 + tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for the Mantix + MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It + has a resolution of 720x1440 pixels, a built in backlight and touch + controller. + config DRM_PANEL_NEC_NL8048HL11 tristate "NEC NL8048HL11 RGB panel" depends on GPIOLIB && OF && SPI @@ -468,17 +445,6 @@ config DRM_PANEL_NOVATEK_NT39016 Say Y here if you want to enable support for the panels built around the Novatek NT39016 display controller. -config DRM_PANEL_MANTIX_MLAF057WE51 - tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" - depends on OF - depends on DRM_MIPI_DSI - depends on BACKLIGHT_CLASS_DEVICE - help - Say Y here if you want to enable support for the Mantix - MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It - has a resolution of 720x1440 pixels, a built in backlight and touch - controller. - config DRM_PANEL_OLIMEX_LCD_OLINUXINO tristate "Olimex LCD-OLinuXino panel" depends on OF @@ -573,6 +539,12 @@ config DRM_PANEL_RONBO_RB070D30 Say Y here if you want to enable support for Ronbo Electronics RB070D30 1024x600 DSI panel. +config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 + tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" + depends on OF + select DRM_MIPI_DSI + select VIDEOMODE_HELPERS + config DRM_PANEL_SAMSUNG_ATNA33XC20 tristate "Samsung ATNA33XC20 eDP panel" depends on OF @@ -596,6 +568,12 @@ config DRM_PANEL_SAMSUNG_DB7430 DB7430 DPI display controller used in such devices as the LMS397KF04 480x800 DPI panel. +config DRM_PANEL_SAMSUNG_LD9040 + tristate "Samsung LD9040 RGB/SPI panel" + depends on OF && SPI + depends on BACKLIGHT_CLASS_DEVICE + select VIDEOMODE_HELPERS + config DRM_PANEL_SAMSUNG_S6D16D0 tristate "Samsung S6D16D0 DSI video mode panel" depends on OF @@ -661,12 +639,6 @@ config DRM_PANEL_SAMSUNG_S6E63M0_DSI Say Y here if you want to be able to access the Samsung S6E63M0 panel using DSI. -config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 - tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" - depends on OF - select DRM_MIPI_DSI - select VIDEOMODE_HELPERS - config DRM_PANEL_SAMSUNG_S6E8AA0 tristate "Samsung S6E8AA0 DSI video mode panel" depends on OF @@ -765,15 +737,6 @@ config DRM_PANEL_SITRONIX_ST7789V Say Y here if you want to enable support for the Sitronix ST7789V controller for 240x320 LCD panels -config DRM_PANEL_SYNAPTICS_R63353 - tristate "Synaptics R63353-based panels" - depends on OF - depends on DRM_MIPI_DSI - depends on BACKLIGHT_CLASS_DEVICE - help - Say Y if you want to enable support for panels based on the - Synaptics R63353 controller. - config DRM_PANEL_SONY_ACX565AKM tristate "Sony ACX565AKM panel" depends on GPIOLIB && OF && SPI @@ -813,6 +776,43 @@ config DRM_PANEL_STARTEK_KD070FHFID015 with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to the host, a built-in LED backlight and touch controller. +config DRM_PANEL_EDP + tristate "support for simple Embedded DisplayPort panels" + depends on OF + depends on BACKLIGHT_CLASS_DEVICE + depends on PM + select VIDEOMODE_HELPERS + select DRM_DISPLAY_DP_HELPER + select DRM_DISPLAY_HELPER + select DRM_DP_AUX_BUS + select DRM_KMS_HELPER + help + DRM panel driver for dumb eDP panels that need at most a regulator and + a GPIO to be powered up. Optionally a backlight can be attached so + that it can be automatically turned off when the panel goes into a + low power state. + +config DRM_PANEL_SIMPLE + tristate "support for simple panels (other than eDP ones)" + depends on OF + depends on BACKLIGHT_CLASS_DEVICE + depends on PM + select VIDEOMODE_HELPERS + help + DRM panel driver for dumb non-eDP panels that need at most a regulator + and a GPIO to be powered up. Optionally a backlight can be attached so + that it can be automatically turned off when the panel goes into a + low power state. + +config DRM_PANEL_SYNAPTICS_R63353 + tristate "Synaptics R63353-based panels" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y if you want to enable support for panels based on the + Synaptics R63353 controller. + config DRM_PANEL_TDO_TL070WSH30 tristate "TDO TL070WSH30 DSI panel" depends on OF @@ -856,6 +856,17 @@ config DRM_PANEL_TRULY_NT35597_WQXGA Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI Video Mode panel +config DRM_PANEL_VISIONOX_R66451 + tristate "Visionox R66451" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + select DRM_DISPLAY_DP_HELPER + select DRM_DISPLAY_HELPER + help + Say Y here if you want to enable support for Visionox + R66451 1080x2340 AMOLED DSI panel. + config DRM_PANEL_VISIONOX_RM69299 tristate "Visionox RM69299" depends on OF @@ -873,17 +884,6 @@ config DRM_PANEL_VISIONOX_VTDR6130 Say Y here if you want to enable support for Visionox VTDR6130 1080x2400 AMOLED DSI panel. -config DRM_PANEL_VISIONOX_R66451 - tristate "Visionox R66451" - depends on OF - depends on DRM_MIPI_DSI - depends on BACKLIGHT_CLASS_DEVICE - select DRM_DISPLAY_DP_HELPER - select DRM_DISPLAY_HELPER - help - Say Y here if you want to enable support for Visionox - R66451 1080x2340 AMOLED DSI panel. - config DRM_PANEL_WIDECHIPS_WS2401 tristate "Widechips WS2401 DPI panel driver" depends on SPI && GPIOLIB