diff --git a/Documentation/devicetree/bindings/display/msm/dpu-common.yaml b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..8ffbc30c6b7f205abc838ce9bb292ce534561569
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml
@@ -0,0 +1,52 @@
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU common properties
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+ - Rob Clark <robdclark@gmail.com>
+
+description: |
+ Common properties for QCom DPU display controller.
+
+properties:
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ operating-points-v2: true
+ opp-table:
+ type: object
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description: |
+ Contains the list of output ports from DPU device. These ports
+ connect to interfaces that are external to the DPU hardware,
+ such as DSI, DP etc.
+
+ patternProperties:
+ "^port@[0-9a-f]+$":
+ $ref: /schemas/graph.yaml#/properties/port
+
+ # at least one port is required
+ required:
+ - port@0
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - interrupts
+ - power-domains
+ - operating-points-v2
+ - ports
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
deleted file mode 100644
index 253665c693e6b91370dadba4134c3c2011649a34..0000000000000000000000000000000000000000
--- a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
+++ /dev/null
@@ -1,223 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/msm/dpu-msm8998.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Display DPU dt properties for MSM8998 target
-
-maintainers:
- - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
-
-description: |
- Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
- sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
- bindings of MDSS and DPU are mentioned for MSM8998 target.
-
-properties:
- compatible:
- items:
- - const: qcom,msm8998-mdss
-
- reg:
- maxItems: 1
-
- reg-names:
- const: mdss
-
- power-domains:
- maxItems: 1
-
- clocks:
- items:
- - description: Display AHB clock
- - description: Display AXI clock
- - description: Display core clock
-
- clock-names:
- items:
- - const: iface
- - const: bus
- - const: core
-
- interrupts:
- maxItems: 1
-
- interrupt-controller: true
-
- "#address-cells": true
-
- "#size-cells": true
-
- "#interrupt-cells":
- const: 1
-
- iommus:
- items:
- - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
-
- ranges: true
-
-patternProperties:
- "^display-controller@[0-9a-f]+$":
- type: object
- description: Node containing the properties of DPU.
- additionalProperties: false
-
- properties:
- compatible:
- items:
- - const: qcom,msm8998-dpu
-
- reg:
- items:
- - description: Address offset and size for mdp register set
- - description: Address offset and size for regdma register set
- - description: Address offset and size for vbif register set
- - description: Address offset and size for non-realtime vbif register set
-
- reg-names:
- items:
- - const: mdp
- - const: regdma
- - const: vbif
- - const: vbif_nrt
-
- clocks:
- items:
- - description: Display ahb clock
- - description: Display axi clock
- - description: Display mem-noc clock
- - description: Display core clock
- - description: Display vsync clock
-
- clock-names:
- items:
- - const: iface
- - const: bus
- - const: mnoc
- - const: core
- - const: vsync
-
- interrupts:
- maxItems: 1
-
- power-domains:
- maxItems: 1
-
- operating-points-v2: true
- opp-table:
- type: object
-
- ports:
- $ref: /schemas/graph.yaml#/properties/ports
- description: |
- Contains the list of output ports from DPU device. These ports
- connect to interfaces that are external to the DPU hardware,
- such as DSI, DP etc. Each output port contains an endpoint that
- describes how it is connected to an external interface.
-
- properties:
- port@0:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF1 (DSI1)
-
- port@1:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF2 (DSI2)
-
- required:
- - port@0
- - port@1
-
- required:
- - compatible
- - reg
- - reg-names
- - clocks
- - interrupts
- - power-domains
- - operating-points-v2
- - ports
-
-required:
- - compatible
- - reg
- - reg-names
- - power-domains
- - clocks
- - interrupts
- - interrupt-controller
- - iommus
- - ranges
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
-
- mdss: display-subsystem@c900000 {
- compatible = "qcom,msm8998-mdss";
- reg = <0x0c900000 0x1000>;
- reg-names = "mdss";
-
- clocks = <&mmcc MDSS_AHB_CLK>,
- <&mmcc MDSS_AXI_CLK>,
- <&mmcc MDSS_MDP_CLK>;
- clock-names = "iface", "bus", "core";
-
- #address-cells = <1>;
- #interrupt-cells = <1>;
- #size-cells = <1>;
-
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- iommus = <&mmss_smmu 0>;
-
- power-domains = <&mmcc MDSS_GDSC>;
- ranges;
-
- display-controller@c901000 {
- compatible = "qcom,msm8998-dpu";
- reg = <0x0c901000 0x8f000>,
- <0x0c9a8e00 0xf0>,
- <0x0c9b0000 0x2008>,
- <0x0c9b8000 0x1040>;
- reg-names = "mdp", "regdma", "vbif", "vbif_nrt";
-
- clocks = <&mmcc MDSS_AHB_CLK>,
- <&mmcc MDSS_AXI_CLK>,
- <&mmcc MNOC_AHB_CLK>,
- <&mmcc MDSS_MDP_CLK>,
- <&mmcc MDSS_VSYNC_CLK>;
- clock-names = "iface", "bus", "mnoc", "core", "vsync";
-
- interrupt-parent = <&mdss>;
- interrupts = <0>;
- operating-points-v2 = <&mdp_opp_table>;
- power-domains = <&rpmpd MSM8998_VDDMX>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- dpu_intf1_out: endpoint {
- remote-endpoint = <&dsi0_in>;
- };
- };
-
- port@1 {
- reg = <1>;
- dpu_intf2_out: endpoint {
- remote-endpoint = <&dsi1_in>;
- };
- };
- };
- };
- };
-...
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
deleted file mode 100644
index c5824e1d23824d59601bc8f5bf3fc3ba58b19c70..0000000000000000000000000000000000000000
--- a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
+++ /dev/null
@@ -1,222 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/msm/dpu-qcm2290.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Display DPU dt properties for QCM2290 target
-
-maintainers:
- - Loic Poulain <loic.poulain@linaro.org>
-
-description: |
- Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
- sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS
- and DPU are mentioned for QCM2290 target.
-
-properties:
- compatible:
- items:
- - const: qcom,qcm2290-mdss
-
- reg:
- maxItems: 1
-
- reg-names:
- const: mdss
-
- power-domains:
- maxItems: 1
-
- clocks:
- items:
- - description: Display AHB clock from gcc
- - description: Display AXI clock
- - description: Display core clock
-
- clock-names:
- items:
- - const: iface
- - const: bus
- - const: core
-
- interrupts:
- maxItems: 1
-
- interrupt-controller: true
-
- "#address-cells": true
-
- "#size-cells": true
-
- "#interrupt-cells":
- const: 1
-
- iommus:
- items:
- - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
- - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1
-
- ranges: true
-
- interconnects:
- items:
- - description: Interconnect path specifying the port ids for data bus
-
- interconnect-names:
- const: mdp0-mem
-
- resets:
- items:
- - description: MDSS_CORE reset
-
-patternProperties:
- "^display-controller@[0-9a-f]+$":
- type: object
- description: Node containing the properties of DPU.
- additionalProperties: false
-
- properties:
- compatible:
- items:
- - const: qcom,qcm2290-dpu
-
- reg:
- items:
- - description: Address offset and size for mdp register set
- - description: Address offset and size for vbif register set
-
- reg-names:
- items:
- - const: mdp
- - const: vbif
-
- clocks:
- items:
- - description: Display AXI clock from gcc
- - description: Display AHB clock from dispcc
- - description: Display core clock from dispcc
- - description: Display lut clock from dispcc
- - description: Display vsync clock from dispcc
-
- clock-names:
- items:
- - const: bus
- - const: iface
- - const: core
- - const: lut
- - const: vsync
-
- interrupts:
- maxItems: 1
-
- power-domains:
- maxItems: 1
-
- operating-points-v2: true
- opp-table:
- type: object
-
- ports:
- $ref: /schemas/graph.yaml#/properties/ports
- description: |
- Contains the list of output ports from DPU device. These ports
- connect to interfaces that are external to the DPU hardware,
- such as DSI. Each output port contains an endpoint that
- describes how it is connected to an external interface.
-
- properties:
- port@0:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF1 (DSI1)
-
- required:
- - port@0
-
- required:
- - compatible
- - reg
- - reg-names
- - clocks
- - interrupts
- - power-domains
- - operating-points-v2
- - ports
-
-required:
- - compatible
- - reg
- - reg-names
- - power-domains
- - clocks
- - interrupts
- - interrupt-controller
- - iommus
- - ranges
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
- #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/interconnect/qcom,qcm2290.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
-
- mdss: mdss@5e00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "qcom,qcm2290-mdss";
- reg = <0x05e00000 0x1000>;
- reg-names = "mdss";
- power-domains = <&dispcc MDSS_GDSC>;
- clocks = <&gcc GCC_DISP_AHB_CLK>,
- <&gcc GCC_DISP_HF_AXI_CLK>,
- <&dispcc DISP_CC_MDSS_MDP_CLK>;
- clock-names = "iface", "bus", "core";
-
- interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <1>;
-
- interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>;
- interconnect-names = "mdp0-mem";
-
- iommus = <&apps_smmu 0x420 0x2>,
- <&apps_smmu 0x421 0x0>;
- ranges;
-
- mdss_mdp: display-controller@5e01000 {
- compatible = "qcom,qcm2290-dpu";
- reg = <0x05e01000 0x8f000>,
- <0x05eb0000 0x2008>;
- reg-names = "mdp", "vbif";
-
- clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
- <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&dispcc DISP_CC_MDSS_MDP_CLK>,
- <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
- <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
- clock-names = "bus", "iface", "core", "lut", "vsync";
-
- operating-points-v2 = <&mdp_opp_table>;
- power-domains = <&rpmpd QCM2290_VDDCX>;
-
- interrupt-parent = <&mdss>;
- interrupts = <0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- dpu_intf1_out: endpoint {
- remote-endpoint = <&dsi0_in>;
- };
- };
- };
- };
- };
-...
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
deleted file mode 100644
index 4890bc25f3fdc5e68f526427a13da92c7c21da2f..0000000000000000000000000000000000000000
--- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
+++ /dev/null
@@ -1,235 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/msm/dpu-sc7180.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Display DPU dt properties for SC7180 target
-
-maintainers:
- - Krishna Manikandan <quic_mkrishn@quicinc.com>
-
-description: |
- Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
- sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
- bindings of MDSS and DPU are mentioned for SC7180 target.
-
-properties:
- compatible:
- items:
- - const: qcom,sc7180-mdss
-
- reg:
- maxItems: 1
-
- reg-names:
- const: mdss
-
- power-domains:
- maxItems: 1
-
- clocks:
- items:
- - description: Display AHB clock from gcc
- - description: Display AHB clock from dispcc
- - description: Display core clock
-
- clock-names:
- items:
- - const: iface
- - const: ahb
- - const: core
-
- interrupts:
- maxItems: 1
-
- interrupt-controller: true
-
- "#address-cells": true
-
- "#size-cells": true
-
- "#interrupt-cells":
- const: 1
-
- iommus:
- items:
- - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
-
- ranges: true
-
- interconnects:
- items:
- - description: Interconnect path specifying the port ids for data bus
-
- interconnect-names:
- const: mdp0-mem
-
- resets:
- items:
- - description: MDSS_CORE reset
-
-patternProperties:
- "^display-controller@[0-9a-f]+$":
- type: object
- description: Node containing the properties of DPU.
- additionalProperties: false
-
- properties:
- compatible:
- items:
- - const: qcom,sc7180-dpu
-
- reg:
- items:
- - description: Address offset and size for mdp register set
- - description: Address offset and size for vbif register set
-
- reg-names:
- items:
- - const: mdp
- - const: vbif
-
- clocks:
- items:
- - description: Display hf axi clock
- - description: Display ahb clock
- - description: Display rotator clock
- - description: Display lut clock
- - description: Display core clock
- - description: Display vsync clock
-
- clock-names:
- items:
- - const: bus
- - const: iface
- - const: rot
- - const: lut
- - const: core
- - const: vsync
-
- interrupts:
- maxItems: 1
-
- power-domains:
- maxItems: 1
-
- operating-points-v2: true
- opp-table:
- type: object
-
- ports:
- $ref: /schemas/graph.yaml#/properties/ports
- description: |
- Contains the list of output ports from DPU device. These ports
- connect to interfaces that are external to the DPU hardware,
- such as DSI, DP etc. Each output port contains an endpoint that
- describes how it is connected to an external interface.
-
- properties:
- port@0:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF1 (DSI1)
-
- port@2:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF0 (DP)
-
- required:
- - port@0
-
- required:
- - compatible
- - reg
- - reg-names
- - clocks
- - interrupts
- - power-domains
- - operating-points-v2
- - ports
-
-required:
- - compatible
- - reg
- - reg-names
- - power-domains
- - clocks
- - interrupts
- - interrupt-controller
- - iommus
- - ranges
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
- #include <dt-bindings/clock/qcom,gcc-sc7180.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/interconnect/qcom,sdm845.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
-
- display-subsystem@ae00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "qcom,sc7180-mdss";
- reg = <0xae00000 0x1000>;
- reg-names = "mdss";
- power-domains = <&dispcc MDSS_GDSC>;
- clocks = <&gcc GCC_DISP_AHB_CLK>,
- <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&dispcc DISP_CC_MDSS_MDP_CLK>;
- clock-names = "iface", "ahb", "core";
-
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <1>;
-
- interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
- interconnect-names = "mdp0-mem";
-
- iommus = <&apps_smmu 0x800 0x2>;
- ranges;
-
- display-controller@ae01000 {
- compatible = "qcom,sc7180-dpu";
- reg = <0x0ae01000 0x8f000>,
- <0x0aeb0000 0x2008>;
-
- reg-names = "mdp", "vbif";
-
- clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
- <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&dispcc DISP_CC_MDSS_ROT_CLK>,
- <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
- <&dispcc DISP_CC_MDSS_MDP_CLK>,
- <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
- clock-names = "bus", "iface", "rot", "lut", "core",
- "vsync";
-
- interrupt-parent = <&mdss>;
- interrupts = <0>;
- power-domains = <&rpmhpd SC7180_CX>;
- operating-points-v2 = <&mdp_opp_table>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- dpu_intf1_out: endpoint {
- remote-endpoint = <&dsi0_in>;
- };
- };
-
- port@2 {
- reg = <2>;
- dpu_intf0_out: endpoint {
- remote-endpoint = <&dp_in>;
- };
- };
- };
- };
- };
-...
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml
deleted file mode 100644
index 584d646021d518cafd68704b4b229bc972b1dffe..0000000000000000000000000000000000000000
--- a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml
+++ /dev/null
@@ -1,239 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/msm/dpu-sc7280.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Display DPU dt properties for SC7280
-
-maintainers:
- - Krishna Manikandan <quic_mkrishn@quicinc.com>
-
-description: |
- Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
- sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
- bindings of MDSS and DPU are mentioned for SC7280.
-
-properties:
- compatible:
- const: qcom,sc7280-mdss
-
- reg:
- maxItems: 1
-
- reg-names:
- const: mdss
-
- power-domains:
- maxItems: 1
-
- clocks:
- items:
- - description: Display AHB clock from gcc
- - description: Display AHB clock from dispcc
- - description: Display core clock
-
- clock-names:
- items:
- - const: iface
- - const: ahb
- - const: core
-
- interrupts:
- maxItems: 1
-
- interrupt-controller: true
-
- "#address-cells": true
-
- "#size-cells": true
-
- "#interrupt-cells":
- const: 1
-
- iommus:
- items:
- - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
-
- ranges: true
-
- interconnects:
- items:
- - description: Interconnect path specifying the port ids for data bus
-
- interconnect-names:
- const: mdp0-mem
-
- resets:
- items:
- - description: MDSS_CORE reset
-
-patternProperties:
- "^display-controller@[0-9a-f]+$":
- type: object
- description: Node containing the properties of DPU.
- additionalProperties: false
-
- properties:
- compatible:
- const: qcom,sc7280-dpu
-
- reg:
- items:
- - description: Address offset and size for mdp register set
- - description: Address offset and size for vbif register set
-
- reg-names:
- items:
- - const: mdp
- - const: vbif
-
- clocks:
- items:
- - description: Display hf axi clock
- - description: Display sf axi clock
- - description: Display ahb clock
- - description: Display lut clock
- - description: Display core clock
- - description: Display vsync clock
-
- clock-names:
- items:
- - const: bus
- - const: nrt_bus
- - const: iface
- - const: lut
- - const: core
- - const: vsync
-
- interrupts:
- maxItems: 1
-
- power-domains:
- maxItems: 1
-
- operating-points-v2: true
- opp-table:
- type: object
-
- ports:
- $ref: /schemas/graph.yaml#/properties/ports
- description: |
- Contains the list of output ports from DPU device. These ports
- connect to interfaces that are external to the DPU hardware,
- such as DSI, DP etc. Each output port contains an endpoint that
- describes how it is connected to an external interface.
-
- properties:
- port@0:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF1 (DSI)
-
- port@1:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF5 (EDP)
-
- required:
- - port@0
-
- required:
- - compatible
- - reg
- - reg-names
- - clocks
- - interrupts
- - power-domains
- - operating-points-v2
- - ports
-
-required:
- - compatible
- - reg
- - reg-names
- - power-domains
- - clocks
- - interrupts
- - interrupt-controller
- - iommus
- - ranges
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
- #include <dt-bindings/clock/qcom,gcc-sc7280.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/interconnect/qcom,sc7280.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
-
- display-subsystem@ae00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "qcom,sc7280-mdss";
- reg = <0xae00000 0x1000>;
- reg-names = "mdss";
- power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
- clocks = <&gcc GCC_DISP_AHB_CLK>,
- <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&dispcc DISP_CC_MDSS_MDP_CLK>;
- clock-names = "iface",
- "ahb",
- "core";
-
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <1>;
-
- interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
- interconnect-names = "mdp0-mem";
-
- iommus = <&apps_smmu 0x900 0x402>;
- ranges;
-
- display-controller@ae01000 {
- compatible = "qcom,sc7280-dpu";
- reg = <0x0ae01000 0x8f000>,
- <0x0aeb0000 0x2008>;
-
- reg-names = "mdp", "vbif";
-
- clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
- <&gcc GCC_DISP_SF_AXI_CLK>,
- <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
- <&dispcc DISP_CC_MDSS_MDP_CLK>,
- <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
- clock-names = "bus",
- "nrt_bus",
- "iface",
- "lut",
- "core",
- "vsync";
-
- interrupt-parent = <&mdss>;
- interrupts = <0>;
- power-domains = <&rpmhpd SC7280_CX>;
- operating-points-v2 = <&mdp_opp_table>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- dpu_intf1_out: endpoint {
- remote-endpoint = <&dsi0_in>;
- };
- };
-
- port@1 {
- reg = <1>;
- dpu_intf5_out: endpoint {
- remote-endpoint = <&edp_in>;
- };
- };
- };
- };
- };
-...
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
deleted file mode 100644
index 7d10373731752b912b0950e393e1d807f2459068..0000000000000000000000000000000000000000
--- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
+++ /dev/null
@@ -1,217 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/msm/dpu-sdm845.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Display DPU dt properties for SDM845 target
-
-maintainers:
- - Krishna Manikandan <quic_mkrishn@quicinc.com>
-
-description: |
- Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
- sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
- bindings of MDSS and DPU are mentioned for SDM845 target.
-
-properties:
- compatible:
- items:
- - const: qcom,sdm845-mdss
-
- reg:
- maxItems: 1
-
- reg-names:
- const: mdss
-
- power-domains:
- maxItems: 1
-
- clocks:
- items:
- - description: Display AHB clock from gcc
- - description: Display core clock
-
- clock-names:
- items:
- - const: iface
- - const: core
-
- interrupts:
- maxItems: 1
-
- interrupt-controller: true
-
- "#address-cells": true
-
- "#size-cells": true
-
- "#interrupt-cells":
- const: 1
-
- iommus:
- items:
- - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
- - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1
-
- ranges: true
-
- resets:
- items:
- - description: MDSS_CORE reset
-
-patternProperties:
- "^display-controller@[0-9a-f]+$":
- type: object
- description: Node containing the properties of DPU.
- additionalProperties: false
-
- properties:
- compatible:
- items:
- - const: qcom,sdm845-dpu
-
- reg:
- items:
- - description: Address offset and size for mdp register set
- - description: Address offset and size for vbif register set
-
- reg-names:
- items:
- - const: mdp
- - const: vbif
-
- clocks:
- items:
- - description: Display ahb clock
- - description: Display axi clock
- - description: Display core clock
- - description: Display vsync clock
-
- clock-names:
- items:
- - const: iface
- - const: bus
- - const: core
- - const: vsync
-
- interrupts:
- maxItems: 1
-
- power-domains:
- maxItems: 1
-
- operating-points-v2: true
- opp-table:
- type: object
-
- ports:
- $ref: /schemas/graph.yaml#/properties/ports
- description: |
- Contains the list of output ports from DPU device. These ports
- connect to interfaces that are external to the DPU hardware,
- such as DSI, DP etc. Each output port contains an endpoint that
- describes how it is connected to an external interface.
-
- properties:
- port@0:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF1 (DSI1)
-
- port@1:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF2 (DSI2)
-
- required:
- - port@0
- - port@1
-
- required:
- - compatible
- - reg
- - reg-names
- - clocks
- - interrupts
- - power-domains
- - operating-points-v2
- - ports
-
-required:
- - compatible
- - reg
- - reg-names
- - power-domains
- - clocks
- - interrupts
- - interrupt-controller
- - iommus
- - ranges
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
- #include <dt-bindings/clock/qcom,gcc-sdm845.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
-
- display-subsystem@ae00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "qcom,sdm845-mdss";
- reg = <0x0ae00000 0x1000>;
- reg-names = "mdss";
- power-domains = <&dispcc MDSS_GDSC>;
-
- clocks = <&gcc GCC_DISP_AHB_CLK>,
- <&dispcc DISP_CC_MDSS_MDP_CLK>;
- clock-names = "iface", "core";
-
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <1>;
-
- iommus = <&apps_smmu 0x880 0x8>,
- <&apps_smmu 0xc80 0x8>;
- ranges;
-
- display-controller@ae01000 {
- compatible = "qcom,sdm845-dpu";
- reg = <0x0ae01000 0x8f000>,
- <0x0aeb0000 0x2008>;
- reg-names = "mdp", "vbif";
-
- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&dispcc DISP_CC_MDSS_AXI_CLK>,
- <&dispcc DISP_CC_MDSS_MDP_CLK>,
- <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
- clock-names = "iface", "bus", "core", "vsync";
-
- interrupt-parent = <&mdss>;
- interrupts = <0>;
- power-domains = <&rpmhpd SDM845_CX>;
- operating-points-v2 = <&mdp_opp_table>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- dpu_intf1_out: endpoint {
- remote-endpoint = <&dsi0_in>;
- };
- };
-
- port@1 {
- reg = <1>;
- dpu_intf2_out: endpoint {
- remote-endpoint = <&dsi1_in>;
- };
- };
- };
- };
- };
-...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index 3b609c19e0bc4b39f41ba7a04e254883a8def590..f2c143730a551fe8b6f68dd35fc18a3c6a633b22 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -49,6 +49,7 @@ properties:
maxItems: 1
phy-names:
+ deprecated: true
const: dsi
"#address-cells": true
@@ -80,6 +81,9 @@ properties:
operating-points-v2: true
+ opp-table:
+ type: object
+
ports:
$ref: "/schemas/graph.yaml#/properties/ports"
description: |
@@ -131,7 +135,6 @@ required:
- clocks
- clock-names
- phys
- - phy-names
- assigned-clocks
- assigned-clock-parents
- power-domains
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
index 1342d74ecfe0f2a9655cd233055ccab0e04d8a94..819de5ce0bc9170b8949f21724172da863ced56a 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
@@ -16,6 +16,7 @@ properties:
compatible:
enum:
- qcom,dsi-phy-14nm
+ - qcom,dsi-phy-14nm-2290
- qcom,dsi-phy-14nm-660
- qcom,dsi-phy-14nm-8953
diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt
index 43d11279c925b4d3edb73a3303f6c5266b661ee8..65d03c58dee6f156e742667cba4e01524c8d5e68 100644
--- a/Documentation/devicetree/bindings/display/msm/mdp5.txt
+++ b/Documentation/devicetree/bindings/display/msm/mdp5.txt
@@ -2,37 +2,9 @@ Qualcomm adreno/snapdragon MDP5 display controller
Description:
-This is the bindings documentation for the Mobile Display Subsytem(MDSS) that
-encapsulates sub-blocks like MDP5, DSI, HDMI, eDP etc, and the MDP5 display
+This is the bindings documentation for the MDP5 display
controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 and MSM8996.
-MDSS:
-Required properties:
-- compatible:
- * "qcom,mdss" - MDSS
-- reg: Physical base address and length of the controller's registers.
-- reg-names: The names of register regions. The following regions are required:
- * "mdss_phys"
- * "vbif_phys"
-- interrupts: The interrupt signal from MDSS.
-- interrupt-controller: identifies the node as an interrupt controller.
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
- source, should be 1.
-- power-domains: a power domain consumer specifier according to
- Documentation/devicetree/bindings/power/power_domain.txt
-- clocks: device clocks. See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required.
- * "iface"
- * "bus"
- * "vsync"
-- #address-cells: number of address cells for the MDSS children. Should be 1.
-- #size-cells: Should be 1.
-- ranges: parent bus address space is the same as the child bus address space.
-
-Optional properties:
-- clock-names: the following clocks are optional:
- * "lut"
-
MDP5:
Required properties:
- compatible:
diff --git a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..27d7242657b2a9762dfbcb1614cb7c95f7d79405
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/mdss-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display MDSS common properties
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+ - Rob Clark <robdclark@gmail.com>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc.
+
+properties:
+ reg:
+ maxItems: 1
+
+ reg-names:
+ const: mdss
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ maxItems: 4
+
+ clock-names:
+ minItems: 2
+ maxItems: 4
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#address-cells": true
+
+ "#size-cells": true
+
+ "#interrupt-cells":
+ const: 1
+
+ iommus:
+ minItems: 1
+ items:
+ - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
+ - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1
+
+ ranges: true
+
+ interconnects:
+ minItems: 1
+ items:
+ - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
+ - description: Interconnect path from mdp1 port to the data bus
+
+ interconnect-names:
+ minItems: 1
+ items:
+ - const: mdp0-mem
+ - const: mdp1-mem
+
+ resets:
+ items:
+ - description: MDSS_CORE reset
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - power-domains
+ - clocks
+ - interrupts
+ - interrupt-controller
+ - iommus
+ - ranges
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..ba0460268731b303fd2e108bb43d30a7a2def4bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Mobile Display SubSystem (MDSS)
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+ - Rob Clark <robdclark@gmail.com>
+
+description:
+ This is the bindings documentation for the Mobile Display Subsytem(MDSS) that
+ encapsulates sub-blocks like MDP5, DSI, HDMI, eDP, etc.
+
+properties:
+ compatible:
+ enum:
+ - qcom,mdss
+
+ reg:
+ minItems: 2
+ maxItems: 3
+
+ reg-names:
+ minItems: 2
+ items:
+ - const: mdss_phys
+ - const: vbif_phys
+ - const: vbif_nrt_phys
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+
+ power-domains:
+ maxItems: 1
+ description: |
+ The MDSS power domain provided by GCC
+
+ clocks:
+ minItems: 1
+ items:
+ - description: Display abh clock
+ - description: Display axi clock
+ - description: Display vsync clock
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: iface
+ - const: bus
+ - const: vsync
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges: true
+
+ resets:
+ items:
+ - description: MDSS_CORE reset
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+ - power-domains
+ - clocks
+ - clock-names
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+
+patternProperties:
+ "^mdp@[1-9a-f][0-9a-f]*$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,mdp5
+
+ "^dsi@[1-9a-f][0-9a-f]*$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,mdss-dsi-ctrl
+
+ "^phy@[1-9a-f][0-9a-f]*$":
+ type: object
+ properties:
+ compatible:
+ enum:
+ - qcom,dsi-phy-14nm
+ - qcom,dsi-phy-14nm-660
+ - qcom,dsi-phy-14nm-8953
+ - qcom,dsi-phy-20nm
+ - qcom,dsi-phy-28nm-hpm
+ - qcom,dsi-phy-28nm-lp
+
+ "^hdmi-phy@[1-9a-f][0-9a-f]*$":
+ type: object
+ properties:
+ compatible:
+ enum:
+ - qcom,hdmi-phy-8084
+ - qcom,hdmi-phy-8660
+ - qcom,hdmi-phy-8960
+ - qcom,hdmi-phy-8974
+ - qcom,hdmi-phy-8996
+
+ "^hdmi-tx@[1-9a-f][0-9a-f]*$":
+ type: object
+ properties:
+ compatible:
+ enum:
+ - qcom,hdmi-tx-8084
+ - qcom,hdmi-tx-8660
+ - qcom,hdmi-tx-8960
+ - qcom,hdmi-tx-8974
+ - qcom,hdmi-tx-8994
+ - qcom,hdmi-tx-8996
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ mdss@1a00000 {
+ compatible = "qcom,mdss";
+ reg = <0x1a00000 0x1000>,
+ <0x1ac8000 0x3000>;
+ reg-names = "mdss_phys", "vbif_phys";
+
+ power-domains = <&gcc MDSS_GDSC>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "vsync";
+
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mdp@1a01000 {
+ compatible = "qcom,mdp5";
+ reg = <0x01a01000 0x89000>;
+ reg-names = "mdp_phys";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "core",
+ "vsync";
+
+ iommus = <&apps_iommu 4>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdp5_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..b02adba36e9ece5681a913a1cdcb5776594e79d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,msm8998-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for MSM8998 target
+
+maintainers:
+ - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,msm8998-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for regdma register set
+ - description: Address offset and size for vbif register set
+ - description: Address offset and size for non-realtime vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: regdma
+ - const: vbif
+ - const: vbif_nrt
+
+ clocks:
+ items:
+ - description: Display ahb clock
+ - description: Display axi clock
+ - description: Display mem-noc clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: mnoc
+ - const: core
+ - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@c901000 {
+ compatible = "qcom,msm8998-dpu";
+ reg = <0x0c901000 0x8f000>,
+ <0x0c9a8e00 0xf0>,
+ <0x0c9b0000 0x2008>,
+ <0x0c9b8000 0x1040>;
+ reg-names = "mdp", "regdma", "vbif", "vbif_nrt";
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MNOC_AHB_CLK>,
+ <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>;
+ clock-names = "iface", "bus", "mnoc", "core", "vsync";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmpd MSM8998_VDDMX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..cf52ff77a41aa62900d56e57a3fb486a4d7c7508
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml
@@ -0,0 +1,268 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,msm8998-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8998 Display MDSS
+
+maintainers:
+ - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+ bindings of MDSS are mentioned for MSM8998 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,msm8998-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock
+ - description: Display AXI clock
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,msm8998-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,dsi-phy-10nm-8998
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@c900000 {
+ compatible = "qcom,msm8998-mdss";
+ reg = <0x0c900000 0x1000>;
+ reg-names = "mdss";
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "core";
+
+ #address-cells = <1>;
+ #interrupt-cells = <1>;
+ #size-cells = <1>;
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ iommus = <&mmss_smmu 0>;
+
+ power-domains = <&mmcc MDSS_GDSC>;
+ ranges;
+
+ display-controller@c901000 {
+ compatible = "qcom,msm8998-dpu";
+ reg = <0x0c901000 0x8f000>,
+ <0x0c9a8e00 0xf0>,
+ <0x0c9b0000 0x2008>,
+ <0x0c9b8000 0x1040>;
+ reg-names = "mdp", "regdma", "vbif", "vbif_nrt";
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MNOC_AHB_CLK>,
+ <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>;
+ clock-names = "iface", "bus", "mnoc", "core", "vsync";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmpd MSM8998_VDDMX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
+
+ dsi@c994000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x0c994000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&mmcc MDSS_BYTE0_CLK>,
+ <&mmcc MDSS_BYTE0_INTF_CLK>,
+ <&mmcc MDSS_PCLK0_CLK>,
+ <&mmcc MDSS_ESC0_CLK>,
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmpd MSM8998_VDDCX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi0_phy: phy@c994400 {
+ compatible = "qcom,dsi-phy-10nm-8998";
+ reg = <0x0c994400 0x200>,
+ <0x0c994600 0x280>,
+ <0x0c994a00 0x1e0>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface", "ref";
+
+ vdds-supply = <&pm8998_l1>;
+ };
+
+ dsi@c996000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x0c996000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&mmcc MDSS_BYTE1_CLK>,
+ <&mmcc MDSS_BYTE1_INTF_CLK>,
+ <&mmcc MDSS_PCLK1_CLK>,
+ <&mmcc MDSS_ESC1_CLK>,
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmpd MSM8998_VDDCX>;
+
+ phys = <&dsi1_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi1_phy: phy@c996400 {
+ compatible = "qcom,dsi-phy-10nm-8998";
+ reg = <0x0c996400 0x200>,
+ <0x0c996600 0x280>,
+ <0x0c996a00 0x10e>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface", "ref";
+
+ vdds-supply = <&pm8998_l1>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..a7b382f01b569077cc219e5861ec1ad40be5d6c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for QCM2290 target
+
+maintainers:
+ - Loic Poulain <loic.poulain@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,qcm2290-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display AXI clock from gcc
+ - description: Display AHB clock from dispcc
+ - description: Display core clock from dispcc
+ - description: Display lut clock from dispcc
+ - description: Display vsync clock from dispcc
+
+ clock-names:
+ items:
+ - const: bus
+ - const: iface
+ - const: core
+ - const: lut
+ - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+ #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@5e01000 {
+ compatible = "qcom,qcm2290-dpu";
+ reg = <0x05e01000 0x8f000>,
+ <0x05eb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus", "iface", "core", "lut", "vsync";
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmpd QCM2290_VDDCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..d6f043a4b08d2dbf86108d15168510dacd78e4f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
@@ -0,0 +1,198 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCM220 Display MDSS
+
+maintainers:
+ - Loic Poulain <loic.poulain@linaro.org>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+ sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS
+ are mentioned for QCM2290 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,qcm2290-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display AXI clock
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: core
+
+ iommus:
+ maxItems: 2
+
+ interconnects:
+ maxItems: 1
+
+ interconnect-names:
+ maxItems: 1
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,qcm2290-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,dsi-ctrl-6g-qcm2290
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,dsi-phy-14nm-2290
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+ #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,qcm2290.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ mdss@5e00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "qcom,qcm2290-mdss";
+ reg = <0x05e00000 0x1000>;
+ reg-names = "mdss";
+ power-domains = <&dispcc MDSS_GDSC>;
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "core";
+
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>;
+ interconnect-names = "mdp0-mem";
+
+ iommus = <&apps_smmu 0x420 0x2>,
+ <&apps_smmu 0x421 0x0>;
+ ranges;
+
+ display-controller@5e01000 {
+ compatible = "qcom,qcm2290-dpu";
+ reg = <0x05e01000 0x8f000>,
+ <0x05eb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus", "iface", "core", "lut", "vsync";
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmpd QCM2290_VDDCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+
+ dsi@5e94000 {
+ compatible = "qcom,dsi-ctrl-6g-qcm2290";
+ reg = <0x05e94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmpd QCM2290_VDDCX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi0_phy: phy@5e94400 {
+ compatible = "qcom,dsi-phy-14nm-2290";
+ reg = <0x05e94400 0x100>,
+ <0x05e94500 0x300>,
+ <0x05e94800 0x188>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface", "ref";
+ vcca-supply = <&vreg_dsi_phy>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..bd590a6b5b96ade2b053e3b4927e051fb5a5c4e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for SC7180 target
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,sc7180-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display hf axi clock
+ - description: Display ahb clock
+ - description: Display rotator clock
+ - description: Display lut clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: iface
+ - const: rot
+ - const: lut
+ - const: core
+ - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sc7180-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_ROT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus", "iface", "rot", "lut", "core",
+ "vsync";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&mdp_opp_table>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ endpoint {
+ remote-endpoint = <&dp_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..13e396d61a51298ed5d6c31ea58908f7e5cc2f0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml
@@ -0,0 +1,304 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7180 Display MDSS
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+ bindings of MDSS are mentioned for SC7180 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,sc7180-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display AHB clock from dispcc
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: ahb
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 1
+
+ interconnect-names:
+ maxItems: 1
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sc7180-dpu
+
+ "^displayport-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sc7180-dp
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,dsi-phy-10nm
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sdm845.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "qcom,sc7180-mdss";
+ reg = <0xae00000 0x1000>;
+ reg-names = "mdss";
+ power-domains = <&dispcc MDSS_GDSC>;
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "ahb", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
+ interconnect-names = "mdp0-mem";
+
+ iommus = <&apps_smmu 0x800 0x2>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sc7180-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_ROT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus", "iface", "rot", "lut", "core",
+ "vsync";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&mdp_opp_table>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&dp_in>;
+ };
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SC7180_CX>;
+
+ phys = <&dsi_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+
+ dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ dsi_phy: phy@ae94400 {
+ compatible = "qcom,dsi-phy-10nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94a00 0x1e0>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ vdds-supply = <&vreg_dsi_phy>;
+ };
+
+ displayport-controller@ae90000 {
+ compatible = "qcom,sc7180-dp";
+
+ reg = <0xae90000 0x200>,
+ <0xae90200 0x200>,
+ <0xae90400 0xc00>,
+ <0xae91000 0x400>,
+ <0xae91400 0x400>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <12>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+ clock-names = "core_iface", "core_aux", "ctrl_link",
+ "ctrl_link_iface", "stream_pixel";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+ assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+ phys = <&dp_phy>;
+ phy-names = "dp";
+
+ operating-points-v2 = <&dp_opp_table>;
+ power-domains = <&rpmhpd SC7180_CX>;
+
+ #sound-dai-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dp_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dp_out: endpoint { };
+ };
+ };
+
+ dp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..924059b387b6bae6d929303e7e7afd20200f1e33
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7280-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for SC7280
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sc7280-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display hf axi clock
+ - description: Display sf axi clock
+ - description: Display ahb clock
+ - description: Display lut clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: nrt_bus
+ - const: iface
+ - const: lut
+ - const: core
+ - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sc7280-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+ power-domains = <&rpmhpd SC7280_CX>;
+ operating-points-v2 = <&mdp_opp_table>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&edp_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..a3de1744ba119cc76482f4ae944e1495a5044db0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml
@@ -0,0 +1,422 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7280-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 Display MDSS
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+ bindings of MDSS are mentioned for SC7280.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sc7280-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display AHB clock from dispcc
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: ahb
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 1
+
+ interconnect-names:
+ maxItems: 1
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sc7280-dpu
+
+ "^displayport-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sc7280-dp
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,mdss-dsi-ctrl
+
+ "^edp@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sc7280-edp
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ enum:
+ - qcom,sc7280-dsi-phy-7nm
+ - qcom,sc7280-edp-phy
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sc7280.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "qcom,sc7280-mdss";
+ reg = <0xae00000 0x1000>;
+ reg-names = "mdss";
+ power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface",
+ "ahb",
+ "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
+ interconnect-names = "mdp0-mem";
+
+ iommus = <&apps_smmu 0x900 0x402>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sc7280-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+ power-domains = <&rpmhpd SC7280_CX>;
+ operating-points-v2 = <&mdp_opp_table>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf5_out: endpoint {
+ remote-endpoint = <&edp_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&dp_in>;
+ };
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SC7280_CX>;
+
+ phys = <&mdss_dsi_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+
+ dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ mdss_dsi_phy: phy@ae94400 {
+ compatible = "qcom,sc7280-dsi-phy-7nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94900 0x280>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ vdds-supply = <&vreg_dsi_supply>;
+ };
+
+ edp@aea0000 {
+ compatible = "qcom,sc7280-edp";
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_hot_plug_det>;
+
+ reg = <0xaea0000 0x200>,
+ <0xaea0200 0x200>,
+ <0xaea0400 0xc00>,
+ <0xaea1000 0x400>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <14>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>;
+ assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>;
+
+ phys = <&mdss_edp_phy>;
+ phy-names = "dp";
+
+ operating-points-v2 = <&edp_opp_table>;
+ power-domains = <&rpmhpd SC7280_CX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ edp_in: endpoint {
+ remote-endpoint = <&dpu_intf5_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss_edp_out: endpoint { };
+ };
+ };
+
+ edp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss_edp_phy: phy@aec2a00 {
+ compatible = "qcom,sc7280-edp-phy";
+
+ reg = <0xaec2a00 0x19c>,
+ <0xaec2200 0xa0>,
+ <0xaec2600 0xa0>,
+ <0xaec2000 0x1c0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_EDP_CLKREF_EN>;
+ clock-names = "aux",
+ "cfg_ahb";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+ };
+
+ displayport-controller@ae90000 {
+ compatible = "qcom,sc7280-dp";
+
+ reg = <0xae90000 0x200>,
+ <0xae90200 0x200>,
+ <0xae90400 0xc00>,
+ <0xae91000 0x400>,
+ <0xae91400 0x400>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <12>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+ assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+ phys = <&dp_phy>;
+ phy-names = "dp";
+
+ operating-points-v2 = <&dp_opp_table>;
+ power-domains = <&rpmhpd SC7280_CX>;
+
+ #sound-dai-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dp_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dp_out: endpoint { };
+ };
+ };
+
+ dp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..5719b45f28602def4296e23be247dc80bdcbfae5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sdm845-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for SDM845 target
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,sdm845-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display GCC bus clock
+ - description: Display ahb clock
+ - description: Display axi clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: gcc-bus
+ - const: iface
+ - const: bus
+ - const: core
+ - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sdm845-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&mdp_opp_table>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..31ca6f99fc223782410fa160faf60c273a28eed6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml
@@ -0,0 +1,270 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sdm845-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 Display MDSS
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+ bindings of MDSS are mentioned for SDM845 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,sdm845-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: core
+
+ iommus:
+ maxItems: 2
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sdm845-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,dsi-phy-10nm
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "qcom,sdm845-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x880 0x8>,
+ <&apps_smmu 0xc80 0x8>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sdm845-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&mdp_opp_table>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SDM845_CX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi0_phy: phy@ae94400 {
+ compatible = "qcom,dsi-phy-10nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94a00 0x1e0>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ vdds-supply = <&vreg_dsi_phy>;
+ };
+
+ dsi@ae96000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae96000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SDM845_CX>;
+
+ phys = <&dsi1_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi1_phy: phy@ae96400 {
+ compatible = "qcom,dsi-phy-10nm";
+ reg = <0x0ae96400 0x200>,
+ <0x0ae96600 0x280>,
+ <0x0ae96a00 0x10e>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ vdds-supply = <&vreg_dsi_phy>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..4a39a30314099883e806bf79db1e4f0ec38c85e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for SM6115 target
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,sm6115-dpu
+
+ reg:
+ items:
+ - description: MDP register set
+ - description: VBIF register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display AXI
+ - description: Display AHB
+ - description: Display core
+ - description: Display lut
+ - description: Display rotator
+ - description: Display vsync
+
+ clock-names:
+ items:
+ - const: bus
+ - const: iface
+ - const: core
+ - const: lut
+ - const: rot
+ - const: vsync
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
+ #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@5e01000 {
+ compatible = "qcom,sm6115-dpu";
+ reg = <0x05e01000 0x8f000>,
+ <0x05eb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_ROT_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus", "iface", "core", "lut", "rot", "vsync";
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmpd SM6115_VDDCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..a86d7f53fa84dfcf2c8fe12d12c38a7c5d07757e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6115 Display MDSS
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+ sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS
+ are mentioned for SM6115 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,sm6115-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display AXI clock
+ - description: Display core clock
+
+ iommus:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sm6115-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,dsi-ctrl-6g-qcm2290
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,dsi-phy-14nm-2290
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
+ #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ mdss@5e00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "qcom,sm6115-mdss";
+ reg = <0x05e00000 0x1000>;
+ reg-names = "mdss";
+ power-domains = <&dispcc MDSS_GDSC>;
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x420 0x2>,
+ <&apps_smmu 0x421 0x0>;
+ ranges;
+
+ display-controller@5e01000 {
+ compatible = "qcom,sm6115-dpu";
+ reg = <0x05e01000 0x8f000>,
+ <0x05eb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_ROT_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus", "iface", "core", "lut", "rot", "vsync";
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmpd SM6115_VDDCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+
+ dsi@5e94000 {
+ compatible = "qcom,dsi-ctrl-6g-qcm2290";
+ reg = <0x05e94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmpd SM6115_VDDCX>;
+ phys = <&dsi0_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi0_phy: phy@5e94400 {
+ compatible = "qcom,dsi-phy-14nm-2290";
+ reg = <0x05e94400 0x100>,
+ <0x05e94500 0x300>,
+ <0x05e94800 0x188>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface", "ref";
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..9ff8a265c85f686c8649746eec6fbf1e457d447b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8250 Display DPU
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8250-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display ahb clock
+ - description: Display hf axi clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: core
+ - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8250.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8250-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "iface", "bus", "core", "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8250_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..0d3be5386b3f46c02ac49e408bb31d75a84cc45f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
@@ -0,0 +1,330 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8250 Display MDSS
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+ bindings of MDSS are mentioned for SM8250 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,sm8250-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display hf axi clock
+ - description: Display sf axi clock
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: nrt_bus
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sm8250-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,dsi-phy-7nm
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8250.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sm8250-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+ <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "nrt_bus", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x820 0x402>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8250-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "iface", "bus", "core", "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8250_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-345000000 {
+ opp-hz = /bits/ 64 <345000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-460000000 {
+ opp-hz = /bits/ 64 <460000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8250_MMCX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+
+ dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ dsi0_phy: phy@ae94400 {
+ compatible = "qcom,dsi-phy-7nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94900 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ vdds-supply = <&vreg_dsi_phy>;
+ };
+
+ dsi@ae96000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae96000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8250_MMCX>;
+
+ phys = <&dsi1_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi1_phy: phy@ae96400 {
+ compatible = "qcom,dsi-phy-7nm";
+ reg = <0x0ae96400 0x200>,
+ <0x0ae96600 0x280>,
+ <0x0ae96900 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ vdds-supply = <&vreg_dsi_phy>;
+ };
+ };
+...
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c
index f436a1f3419d8d676dc612fcc65ce16b85ba8dec..d95540309d4d8d7bf55ca8f5a00fa9458e5fe235 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c
@@ -434,6 +434,12 @@ static const struct dpu_format dpu_format_map[] = {
DPU_CHROMA_H2V1, DPU_FORMAT_FLAG_YUV,
DPU_FETCH_LINEAR, 2),
+ PSEUDO_YUV_FMT_LOOSE(P010,
+ 0, COLOR_8BIT, COLOR_8BIT, COLOR_8BIT,
+ C1_B_Cb, C2_R_Cr,
+ DPU_CHROMA_420, DPU_FORMAT_FLAG_DX | DPU_FORMAT_FLAG_YUV,
+ DPU_FETCH_LINEAR, 2),
+
INTERLEAVED_YUV_FMT(VYUY,
0, COLOR_8BIT, COLOR_8BIT, COLOR_8BIT,
C2_R_Cr, C0_G_Y, C1_B_Cb, C0_G_Y,
@@ -524,12 +530,26 @@ static const struct dpu_format dpu_format_map_ubwc[] = {
true, 4, DPU_FORMAT_FLAG_DX | DPU_FORMAT_FLAG_COMPRESSED,
DPU_FETCH_UBWC, 2, DPU_TILE_HEIGHT_UBWC),
+ INTERLEAVED_RGB_FMT_TILED(XRGB2101010,
+ COLOR_8BIT, COLOR_8BIT, COLOR_8BIT, COLOR_8BIT,
+ C2_R_Cr, C0_G_Y, C1_B_Cb, C3_ALPHA, 4,
+ true, 4, DPU_FORMAT_FLAG_DX | DPU_FORMAT_FLAG_COMPRESSED,
+ DPU_FETCH_UBWC, 2, DPU_TILE_HEIGHT_UBWC),
+
PSEUDO_YUV_FMT_TILED(NV12,
0, COLOR_8BIT, COLOR_8BIT, COLOR_8BIT,
C1_B_Cb, C2_R_Cr,
DPU_CHROMA_420, DPU_FORMAT_FLAG_YUV |
DPU_FORMAT_FLAG_COMPRESSED,
DPU_FETCH_UBWC, 4, DPU_TILE_HEIGHT_NV12),
+
+ PSEUDO_YUV_FMT_TILED(P010,
+ 0, COLOR_8BIT, COLOR_8BIT, COLOR_8BIT,
+ C1_B_Cb, C2_R_Cr,
+ DPU_CHROMA_420, DPU_FORMAT_FLAG_DX |
+ DPU_FORMAT_FLAG_YUV |
+ DPU_FORMAT_FLAG_COMPRESSED,
+ DPU_FETCH_UBWC, 4, DPU_TILE_HEIGHT_UBWC),
};
/* _dpu_get_v_h_subsample_rate - Get subsample rates for all formats we support
@@ -571,13 +591,15 @@ static int _dpu_format_get_media_color_ubwc(const struct dpu_format *fmt)
{DRM_FORMAT_XBGR8888, COLOR_FMT_RGBA8888_UBWC},
{DRM_FORMAT_XRGB8888, COLOR_FMT_RGBA8888_UBWC},
{DRM_FORMAT_ABGR2101010, COLOR_FMT_RGBA1010102_UBWC},
+ {DRM_FORMAT_XRGB2101010, COLOR_FMT_RGBA1010102_UBWC},
{DRM_FORMAT_XBGR2101010, COLOR_FMT_RGBA1010102_UBWC},
{DRM_FORMAT_BGR565, COLOR_FMT_RGB565_UBWC},
};
int color_fmt = -1;
int i;
- if (fmt->base.pixel_format == DRM_FORMAT_NV12) {
+ if (fmt->base.pixel_format == DRM_FORMAT_NV12 ||
+ fmt->base.pixel_format == DRM_FORMAT_P010) {
if (DPU_FORMAT_IS_DX(fmt)) {
if (fmt->unpack_tight)
color_fmt = COLOR_FMT_NV12_BPP10_UBWC;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 27f029fdc68298c6f182148a75f2bdaf340ee7af..2196e205efa5ed7d77e0e697798e3f3d39073234 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -156,6 +156,7 @@ static const uint32_t plane_formats[] = {
DRM_FORMAT_RGBX8888,
DRM_FORMAT_BGRX8888,
DRM_FORMAT_XBGR8888,
+ DRM_FORMAT_XRGB2101010,
DRM_FORMAT_RGB888,
DRM_FORMAT_BGR888,
DRM_FORMAT_RGB565,
@@ -184,6 +185,7 @@ static const uint32_t plane_formats_yuv[] = {
DRM_FORMAT_RGBA8888,
DRM_FORMAT_BGRX8888,
DRM_FORMAT_BGRA8888,
+ DRM_FORMAT_XRGB2101010,
DRM_FORMAT_XRGB8888,
DRM_FORMAT_XBGR8888,
DRM_FORMAT_RGBX8888,
@@ -208,6 +210,7 @@ static const uint32_t plane_formats_yuv[] = {
DRM_FORMAT_RGBX4444,
DRM_FORMAT_BGRX4444,
+ DRM_FORMAT_P010,
DRM_FORMAT_NV12,
DRM_FORMAT_NV21,
DRM_FORMAT_NV16,
@@ -318,6 +321,18 @@ static const struct dpu_caps sc7180_dpu_caps = {
.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
};
+static const struct dpu_caps sm6115_dpu_caps = {
+ .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+ .max_mixer_blendstages = 0x4,
+ .qseed_type = DPU_SSPP_SCALER_QSEED3LITE,
+ .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
+ .ubwc_version = DPU_HW_UBWC_VER_20,
+ .has_dim_layer = true,
+ .has_idle_pc = true,
+ .max_linewidth = 2160,
+ .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+};
+
static const struct dpu_caps sm8150_dpu_caps = {
.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
.max_mixer_blendstages = 0xb,
@@ -472,6 +487,19 @@ static const struct dpu_mdp_cfg sc8180x_mdp[] = {
},
};
+static const struct dpu_mdp_cfg sm6115_mdp[] = {
+ {
+ .name = "top_0", .id = MDP_TOP,
+ .base = 0x0, .len = 0x494,
+ .features = 0,
+ .highest_bank_bit = 0x1,
+ .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
+ .reg_off = 0x2ac, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_DMA0] = {
+ .reg_off = 0x2ac, .bit_off = 8},
+ },
+};
+
static const struct dpu_mdp_cfg sm8250_mdp[] = {
{
.name = "top_0", .id = MDP_TOP,
@@ -849,6 +877,16 @@ static const struct dpu_sspp_cfg sc7180_sspp[] = {
sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
};
+static const struct dpu_sspp_sub_blks sm6115_vig_sblk_0 =
+ _VIG_SBLK("0", 2, DPU_SSPP_SCALER_QSEED3LITE);
+
+static const struct dpu_sspp_cfg sm6115_sspp[] = {
+ SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SM8250_MASK,
+ sm6115_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
+ SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK,
+ sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
+};
+
static const struct dpu_sspp_sub_blks sm8250_vig_sblk_0 =
_VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3LITE);
static const struct dpu_sspp_sub_blks sm8250_vig_sblk_1 =
@@ -1175,6 +1213,13 @@ static const struct dpu_pingpong_cfg sm8150_pp[] = {
-1),
};
+static const struct dpu_pingpong_cfg sc7280_pp[] = {
+ PP_BLK("pingpong_0", PINGPONG_0, 0x59000, 0, sc7280_pp_sblk, -1, -1),
+ PP_BLK("pingpong_1", PINGPONG_1, 0x6a000, 0, sc7280_pp_sblk, -1, -1),
+ PP_BLK("pingpong_2", PINGPONG_2, 0x6b000, 0, sc7280_pp_sblk, -1, -1),
+ PP_BLK("pingpong_3", PINGPONG_3, 0x6c000, 0, sc7280_pp_sblk, -1, -1),
+};
+
static struct dpu_pingpong_cfg qcm2290_pp[] = {
PP_BLK("pingpong_0", PINGPONG_0, 0x70000, 0, sdm845_pp_sblk,
DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
@@ -1198,13 +1243,6 @@ static const struct dpu_merge_3d_cfg sm8150_merge_3d[] = {
MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x83200),
};
-static const struct dpu_pingpong_cfg sc7280_pp[] = {
- PP_BLK("pingpong_0", PINGPONG_0, 0x59000, 0, sc7280_pp_sblk, -1, -1),
- PP_BLK("pingpong_1", PINGPONG_1, 0x6a000, 0, sc7280_pp_sblk, -1, -1),
- PP_BLK("pingpong_2", PINGPONG_2, 0x6b000, 0, sc7280_pp_sblk, -1, -1),
- PP_BLK("pingpong_3", PINGPONG_3, 0x6c000, 0, sc7280_pp_sblk, -1, -1),
-};
-
/*************************************************************
* DSC sub blocks config
*************************************************************/
@@ -1587,6 +1625,35 @@ static const struct dpu_perf_cfg sc7180_perf_data = {
.bw_inefficiency_factor = 120,
};
+static const struct dpu_perf_cfg sm6115_perf_data = {
+ .max_bw_low = 3100000,
+ .max_bw_high = 4000000,
+ .min_core_ib = 2400000,
+ .min_llcc_ib = 800000,
+ .min_dram_ib = 800000,
+ .min_prefill_lines = 24,
+ .danger_lut_tbl = {0xff, 0xffff, 0x0},
+ .safe_lut_tbl = {0xfff0, 0xff00, 0xffff},
+ .qos_lut_tbl = {
+ {.nentry = ARRAY_SIZE(sc7180_qos_linear),
+ .entries = sc7180_qos_linear
+ },
+ {.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
+ .entries = sc7180_qos_macrotile
+ },
+ {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
+ .entries = sc7180_qos_nrt
+ },
+ /* TODO: macrotile-qseed is different from macrotile */
+ },
+ .cdp_cfg = {
+ {.rd_enable = 1, .wr_enable = 1},
+ {.rd_enable = 1, .wr_enable = 0}
+ },
+ .clk_inefficiency_factor = 105,
+ .bw_inefficiency_factor = 120,
+};
+
static const struct dpu_perf_cfg sm8150_perf_data = {
.max_bw_low = 12800000,
.max_bw_high = 12800000,
@@ -1798,6 +1865,28 @@ static const struct dpu_mdss_cfg sc7180_dpu_cfg = {
.mdss_irqs = IRQ_SC7180_MASK,
};
+static const struct dpu_mdss_cfg sm6115_dpu_cfg = {
+ .caps = &sm6115_dpu_caps,
+ .mdp_count = ARRAY_SIZE(sm6115_mdp),
+ .mdp = sm6115_mdp,
+ .ctl_count = ARRAY_SIZE(qcm2290_ctl),
+ .ctl = qcm2290_ctl,
+ .sspp_count = ARRAY_SIZE(sm6115_sspp),
+ .sspp = sm6115_sspp,
+ .mixer_count = ARRAY_SIZE(qcm2290_lm),
+ .mixer = qcm2290_lm,
+ .dspp_count = ARRAY_SIZE(qcm2290_dspp),
+ .dspp = qcm2290_dspp,
+ .pingpong_count = ARRAY_SIZE(qcm2290_pp),
+ .pingpong = qcm2290_pp,
+ .intf_count = ARRAY_SIZE(qcm2290_intf),
+ .intf = qcm2290_intf,
+ .vbif_count = ARRAY_SIZE(sdm845_vbif),
+ .vbif = sdm845_vbif,
+ .perf = &sm6115_perf_data,
+ .mdss_irqs = IRQ_SC7180_MASK,
+};
+
static const struct dpu_mdss_cfg sm8150_dpu_cfg = {
.caps = &sm8150_dpu_caps,
.mdp_count = ARRAY_SIZE(sdm845_mdp),
@@ -1932,6 +2021,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
{ .hw_rev = DPU_HW_VER_510, .dpu_cfg = &sc8180x_dpu_cfg},
{ .hw_rev = DPU_HW_VER_600, .dpu_cfg = &sm8250_dpu_cfg},
{ .hw_rev = DPU_HW_VER_620, .dpu_cfg = &sc7180_dpu_cfg},
+ { .hw_rev = DPU_HW_VER_630, .dpu_cfg = &sm6115_dpu_cfg},
{ .hw_rev = DPU_HW_VER_650, .dpu_cfg = &qcm2290_dpu_cfg},
{ .hw_rev = DPU_HW_VER_720, .dpu_cfg = &sc7280_dpu_cfg},
};
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 38aa38ab1568581bcab69ac067e26ea9118146bc..3b645d5aa9aab7e5eaa89eaec5fb26a874ea6ad7 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -44,6 +44,7 @@
#define DPU_HW_VER_510 DPU_HW_VER(5, 1, 1) /* sc8180 */
#define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */
#define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
+#define DPU_HW_VER_630 DPU_HW_VER(6, 3, 0) /* sm6115|sm4250 */
#define DPU_HW_VER_650 DPU_HW_VER(6, 5, 0) /* qcm2290|sm4125 */
#define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
index f2ddcfb6f7ee6e10a80d78bca82c59acf2e6334f..3662df698dae5206dbbf7c312341c65c10be8212 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
@@ -42,7 +42,7 @@ static void dpu_hw_dsc_config(struct dpu_hw_dsc *hw_dsc,
u32 initial_lines)
{
struct dpu_hw_blk_reg_map *c = &hw_dsc->hw;
- u32 data, lsb, bpp;
+ u32 data;
u32 slice_last_group_size;
u32 det_thresh_flatness;
bool is_cmd_mode = !(mode & DSC_MODE_VIDEO);
@@ -56,14 +56,7 @@ static void dpu_hw_dsc_config(struct dpu_hw_dsc *hw_dsc,
data = (initial_lines << 20);
data |= ((slice_last_group_size - 1) << 18);
/* bpp is 6.4 format, 4 LSBs bits are for fractional part */
- data |= dsc->bits_per_pixel << 12;
- lsb = dsc->bits_per_pixel % 4;
- bpp = dsc->bits_per_pixel / 4;
- bpp *= 4;
- bpp <<= 4;
- bpp |= lsb;
-
- data |= bpp << 8;
+ data |= (dsc->bits_per_pixel << 8);
data |= (dsc->block_pred_enable << 7);
data |= (dsc->line_buf_depth << 3);
data |= (dsc->simple_422 << 2);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 5e6e2626151e8d174f8ce78facb7cc0e2e0a2361..b71199511a52d723888e47e39ddfa9e0e2f87b8a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -194,7 +194,7 @@ struct dpu_debugfs_regset32 {
struct dpu_kms *dpu_kms;
};
-static int _dpu_debugfs_show_regset32(struct seq_file *s, void *data)
+static int dpu_regset32_show(struct seq_file *s, void *data)
{
struct dpu_debugfs_regset32 *regset = s->private;
struct dpu_kms *dpu_kms = regset->dpu_kms;
@@ -227,19 +227,7 @@ static int _dpu_debugfs_show_regset32(struct seq_file *s, void *data)
return 0;
}
-
-static int dpu_debugfs_open_regset32(struct inode *inode,
- struct file *file)
-{
- return single_open(file, _dpu_debugfs_show_regset32, inode->i_private);
-}
-
-static const struct file_operations dpu_fops_regset32 = {
- .open = dpu_debugfs_open_regset32,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(dpu_regset32);
void dpu_debugfs_create_regset32(const char *name, umode_t mode,
void *parent,
@@ -259,7 +247,7 @@ void dpu_debugfs_create_regset32(const char *name, umode_t mode,
regset->blk_len = length;
regset->dpu_kms = dpu_kms;
- debugfs_create_file(name, mode, parent, regset, &dpu_fops_regset32);
+ debugfs_create_file(name, mode, parent, regset, &dpu_regset32_fops);
}
static int dpu_kms_debugfs_init(struct msm_kms *kms, struct drm_minor *minor)
@@ -1304,6 +1292,7 @@ static const struct of_device_id dpu_dt_match[] = {
{ .compatible = "qcom,sc7180-dpu", },
{ .compatible = "qcom,sc7280-dpu", },
{ .compatible = "qcom,sc8180x-dpu", },
+ { .compatible = "qcom,sm6115-dpu", },
{ .compatible = "qcom,sm8150-dpu", },
{ .compatible = "qcom,sm8250-dpu", },
{}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 658005f609f4b3d1e373dd8d3dbaf888ad80e122..86719020afe20bf096fad19c281d9cfc849acdc6 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -69,9 +69,11 @@ static const uint32_t qcom_compressed_supported_formats[] = {
DRM_FORMAT_ARGB8888,
DRM_FORMAT_XBGR8888,
DRM_FORMAT_XRGB8888,
+ DRM_FORMAT_XRGB2101010,
DRM_FORMAT_BGR565,
DRM_FORMAT_NV12,
+ DRM_FORMAT_P010,
};
/**
diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
index b0d21838a13439027f1df3c3fd23b21c857eb1e5..29ae5c9613f36602877bacc5edb12bbce9bb4f6b 100644
--- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
+++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
@@ -203,7 +203,7 @@ static int mdp5_set_split_display(struct msm_kms *kms,
slave_encoder);
}
-static void mdp5_destroy(struct platform_device *pdev);
+static void mdp5_destroy(struct mdp5_kms *mdp5_kms);
static void mdp5_kms_destroy(struct msm_kms *kms)
{
@@ -223,7 +223,7 @@ static void mdp5_kms_destroy(struct msm_kms *kms)
}
mdp_kms_destroy(&mdp5_kms->base);
- mdp5_destroy(mdp5_kms->pdev);
+ mdp5_destroy(mdp5_kms);
}
#ifdef CONFIG_DEBUG_FS
@@ -559,6 +559,8 @@ static int mdp5_kms_init(struct drm_device *dev)
int irq, i, ret;
ret = mdp5_init(to_platform_device(dev->dev), dev);
+ if (ret)
+ return ret;
/* priv->kms would have been populated by the MDP5 driver */
kms = priv->kms;
@@ -632,9 +634,8 @@ static int mdp5_kms_init(struct drm_device *dev)
return ret;
}
-static void mdp5_destroy(struct platform_device *pdev)
+static void mdp5_destroy(struct mdp5_kms *mdp5_kms)
{
- struct mdp5_kms *mdp5_kms = platform_get_drvdata(pdev);
int i;
if (mdp5_kms->ctlm)
@@ -648,7 +649,7 @@ static void mdp5_destroy(struct platform_device *pdev)
kfree(mdp5_kms->intfs[i]);
if (mdp5_kms->rpm_enabled)
- pm_runtime_disable(&pdev->dev);
+ pm_runtime_disable(&mdp5_kms->pdev->dev);
drm_atomic_private_obj_fini(&mdp5_kms->glob_state);
drm_modeset_lock_fini(&mdp5_kms->glob_state_lock);
@@ -797,8 +798,6 @@ static int mdp5_init(struct platform_device *pdev, struct drm_device *dev)
goto fail;
}
- platform_set_drvdata(pdev, mdp5_kms);
-
spin_lock_init(&mdp5_kms->resource_lock);
mdp5_kms->dev = dev;
@@ -839,6 +838,9 @@ static int mdp5_init(struct platform_device *pdev, struct drm_device *dev)
*/
clk_set_rate(mdp5_kms->core_clk, 200000000);
+ /* set uninit-ed kms */
+ priv->kms = &mdp5_kms->base.base;
+
pm_runtime_enable(&pdev->dev);
mdp5_kms->rpm_enabled = true;
@@ -890,13 +892,10 @@ static int mdp5_init(struct platform_device *pdev, struct drm_device *dev)
if (ret)
goto fail;
- /* set uninit-ed kms */
- priv->kms = &mdp5_kms->base.base;
-
return 0;
fail:
if (mdp5_kms)
- mdp5_destroy(pdev);
+ mdp5_destroy(mdp5_kms);
return ret;
}
@@ -953,7 +952,8 @@ static int mdp5_dev_remove(struct platform_device *pdev)
static __maybe_unused int mdp5_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
- struct mdp5_kms *mdp5_kms = platform_get_drvdata(pdev);
+ struct msm_drm_private *priv = platform_get_drvdata(pdev);
+ struct mdp5_kms *mdp5_kms = to_mdp5_kms(to_mdp_kms(priv->kms));
DBG("");
@@ -963,7 +963,8 @@ static __maybe_unused int mdp5_runtime_suspend(struct device *dev)
static __maybe_unused int mdp5_runtime_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
- struct mdp5_kms *mdp5_kms = platform_get_drvdata(pdev);
+ struct msm_drm_private *priv = platform_get_drvdata(pdev);
+ struct mdp5_kms *mdp5_kms = to_mdp5_kms(to_mdp_kms(priv->kms));
DBG("");
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index a49f6dbbe8883d8e84ba8b502983a6f8c3559cca..44676f0bb3ef086bcf6f5bc819c9d8a8209d1860 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -1600,20 +1600,10 @@ static int dp_display_get_next_bridge(struct msm_dp *dp)
int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
struct drm_encoder *encoder)
{
- struct msm_drm_private *priv;
+ struct msm_drm_private *priv = dev->dev_private;
struct dp_display_private *dp_priv;
int ret;
- if (WARN_ON(!encoder) || WARN_ON(!dp_display) || WARN_ON(!dev))
- return -EINVAL;
-
- priv = dev->dev_private;
-
- if (priv->num_bridges == ARRAY_SIZE(priv->bridges)) {
- DRM_DEV_ERROR(dev->dev, "too many bridges\n");
- return -ENOSPC;
- }
-
dp_display->drm_dev = dev;
dp_priv = container_of(dp_display, struct dp_display_private, dp_display);
diff --git a/drivers/gpu/drm/msm/dp/dp_link.c b/drivers/gpu/drm/msm/dp/dp_link.c
index 36bb6191d2f030fb11322dedad1d9ed10b116170..f1f1d646539d7348d98c8351be95cd3ed6445516 100644
--- a/drivers/gpu/drm/msm/dp/dp_link.c
+++ b/drivers/gpu/drm/msm/dp/dp_link.c
@@ -49,23 +49,26 @@ static int dp_aux_link_power_up(struct drm_dp_aux *aux,
struct dp_link_info *link)
{
u8 value;
- int err;
+ ssize_t len;
+ int i;
if (link->revision < 0x11)
return 0;
- err = drm_dp_dpcd_readb(aux, DP_SET_POWER, &value);
- if (err < 0)
- return err;
+ len = drm_dp_dpcd_readb(aux, DP_SET_POWER, &value);
+ if (len < 0)
+ return len;
value &= ~DP_SET_POWER_MASK;
value |= DP_SET_POWER_D0;
- err = drm_dp_dpcd_writeb(aux, DP_SET_POWER, value);
- if (err < 0)
- return err;
-
- usleep_range(1000, 2000);
+ /* retry for 1ms to give the sink time to wake up */
+ for (i = 0; i < 3; i++) {
+ len = drm_dp_dpcd_writeb(aux, DP_SET_POWER, value);
+ usleep_range(1000, 2000);
+ if (len == 1)
+ break;
+ }
return 0;
}
diff --git a/drivers/gpu/drm/msm/dsi/dsi.c b/drivers/gpu/drm/msm/dsi/dsi.c
index 8a95c744972a1aa28c6f091ca7c07df2b85d1e0d..31fdee2052be36ec4559dfb40c33ab70f1ce40a7 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.c
+++ b/drivers/gpu/drm/msm/dsi/dsi.c
@@ -211,14 +211,9 @@ void __exit msm_dsi_unregister(void)
int msm_dsi_modeset_init(struct msm_dsi *msm_dsi, struct drm_device *dev,
struct drm_encoder *encoder)
{
- struct msm_drm_private *priv;
+ struct msm_drm_private *priv = dev->dev_private;
int ret;
- if (WARN_ON(!encoder) || WARN_ON(!msm_dsi) || WARN_ON(!dev))
- return -EINVAL;
-
- priv = dev->dev_private;
-
if (priv->num_bridges == ARRAY_SIZE(priv->bridges)) {
DRM_DEV_ERROR(dev->dev, "too many bridges\n");
return -ENOSPC;
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 7fbf391c024f8e9d69bd0952deba7a584feb7c47..89aadd3b3202b3abdf7ba1fef43676367fcdf9b6 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -21,6 +21,7 @@
#include <video/mipi_display.h>
+#include <drm/display/drm_dsc_helper.h>
#include <drm/drm_of.h>
#include "dsi.h"
@@ -33,7 +34,7 @@
#define DSI_RESET_TOGGLE_DELAY_MS 20
-static int dsi_populate_dsc_params(struct drm_dsc_config *dsc);
+static int dsi_populate_dsc_params(struct msm_dsi_host *msm_host, struct drm_dsc_config *dsc);
static int dsi_get_version(const void __iomem *base, u32 *major, u32 *minor)
{
@@ -842,17 +843,15 @@ static void dsi_ctrl_config(struct msm_dsi_host *msm_host, bool enable,
static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mode, u32 hdisplay)
{
struct drm_dsc_config *dsc = msm_host->dsc;
- u32 reg, intf_width, reg_ctrl, reg_ctrl2;
+ u32 reg, reg_ctrl, reg_ctrl2;
u32 slice_per_intf, total_bytes_per_intf;
u32 pkt_per_line;
- u32 bytes_in_slice;
u32 eol_byte_num;
/* first calculate dsc parameters and then program
* compress mode registers
*/
- intf_width = hdisplay;
- slice_per_intf = DIV_ROUND_UP(intf_width, dsc->slice_width);
+ slice_per_intf = DIV_ROUND_UP(hdisplay, dsc->slice_width);
/* If slice_per_pkt is greater than slice_per_intf
* then default to 1. This can happen during partial
@@ -861,12 +860,7 @@ static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
if (slice_per_intf > dsc->slice_count)
dsc->slice_count = 1;
- slice_per_intf = DIV_ROUND_UP(hdisplay, dsc->slice_width);
- bytes_in_slice = DIV_ROUND_UP(dsc->slice_width * dsc->bits_per_pixel, 8);
-
- dsc->slice_chunk_size = bytes_in_slice;
-
- total_bytes_per_intf = bytes_in_slice * slice_per_intf;
+ total_bytes_per_intf = dsc->slice_chunk_size * slice_per_intf;
eol_byte_num = total_bytes_per_intf % 3;
pkt_per_line = slice_per_intf / dsc->slice_count;
@@ -892,7 +886,7 @@ static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
reg_ctrl |= reg;
reg_ctrl2 &= ~DSI_COMMAND_COMPRESSION_MODE_CTRL2_STREAM0_SLICE_WIDTH__MASK;
- reg_ctrl2 |= DSI_COMMAND_COMPRESSION_MODE_CTRL2_STREAM0_SLICE_WIDTH(bytes_in_slice);
+ reg_ctrl2 |= DSI_COMMAND_COMPRESSION_MODE_CTRL2_STREAM0_SLICE_WIDTH(dsc->slice_chunk_size);
dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL, reg_ctrl);
dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2, reg_ctrl2);
@@ -915,6 +909,7 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
u32 va_end = va_start + mode->vdisplay;
u32 hdisplay = mode->hdisplay;
u32 wc;
+ int ret;
DBG("");
@@ -950,7 +945,9 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
/* we do the calculations for dsc parameters here so that
* panel can use these parameters
*/
- dsi_populate_dsc_params(dsc);
+ ret = dsi_populate_dsc_params(msm_host, dsc);
+ if (ret)
+ return;
/* Divide the display by 3 but keep back/font porch and
* pulse width same
@@ -1754,18 +1751,20 @@ static char bpg_offset[DSC_NUM_BUF_RANGES] = {
2, 0, 0, -2, -4, -6, -8, -8, -8, -10, -10, -12, -12, -12, -12
};
-static int dsi_populate_dsc_params(struct drm_dsc_config *dsc)
-{
- int mux_words_size;
- int groups_per_line, groups_total;
- int min_rate_buffer_size;
- int hrd_delay;
- int pre_num_extra_mux_bits, num_extra_mux_bits;
- int slice_bits;
- int target_bpp_x16;
- int data;
- int final_value, final_scale;
+static int dsi_populate_dsc_params(struct msm_dsi_host *msm_host, struct drm_dsc_config *dsc)
+{
int i;
+ u16 bpp = dsc->bits_per_pixel >> 4;
+
+ if (dsc->bits_per_pixel & 0xf) {
+ DRM_DEV_ERROR(&msm_host->pdev->dev, "DSI does not support fractional bits_per_pixel\n");
+ return -EINVAL;
+ }
+
+ if (dsc->bits_per_component != 8) {
+ DRM_DEV_ERROR(&msm_host->pdev->dev, "DSI does not support bits_per_component != 8 yet\n");
+ return -EOPNOTSUPP;
+ }
dsc->rc_model_size = 8192;
dsc->first_line_bpg_offset = 12;
@@ -1783,16 +1782,21 @@ static int dsi_populate_dsc_params(struct drm_dsc_config *dsc)
for (i = 0; i < DSC_NUM_BUF_RANGES; i++) {
dsc->rc_range_params[i].range_min_qp = min_qp[i];
dsc->rc_range_params[i].range_max_qp = max_qp[i];
- dsc->rc_range_params[i].range_bpg_offset = bpg_offset[i];
+ /*
+ * Range BPG Offset contains two's-complement signed values that fill
+ * 8 bits, yet the registers and DCS PPS field are only 6 bits wide.
+ */
+ dsc->rc_range_params[i].range_bpg_offset = bpg_offset[i] & DSC_RANGE_BPG_OFFSET_MASK;
}
- dsc->initial_offset = 6144; /* Not bpp 12 */
- if (dsc->bits_per_pixel != 8)
+ dsc->initial_offset = 6144; /* Not bpp 12 */
+ if (bpp != 8)
dsc->initial_offset = 2048; /* bpp = 12 */
- mux_words_size = 48; /* bpc == 8/10 */
- if (dsc->bits_per_component == 12)
- mux_words_size = 64;
+ if (dsc->bits_per_component <= 10)
+ dsc->mux_word_size = DSC_MUX_WORD_SIZE_8_10_BPC;
+ else
+ dsc->mux_word_size = DSC_MUX_WORD_SIZE_12_BPC;
dsc->initial_xmit_delay = 512;
dsc->initial_scale_value = 32;
@@ -1804,63 +1808,8 @@ static int dsi_populate_dsc_params(struct drm_dsc_config *dsc)
dsc->flatness_max_qp = 12;
dsc->rc_quant_incr_limit0 = 11;
dsc->rc_quant_incr_limit1 = 11;
- dsc->mux_word_size = DSC_MUX_WORD_SIZE_8_10_BPC;
-
- /* FIXME: need to call drm_dsc_compute_rc_parameters() so that rest of
- * params are calculated
- */
- groups_per_line = DIV_ROUND_UP(dsc->slice_width, 3);
- dsc->slice_chunk_size = dsc->slice_width * dsc->bits_per_pixel / 8;
- if ((dsc->slice_width * dsc->bits_per_pixel) % 8)
- dsc->slice_chunk_size++;
- /* rbs-min */
- min_rate_buffer_size = dsc->rc_model_size - dsc->initial_offset +
- dsc->initial_xmit_delay * dsc->bits_per_pixel +
- groups_per_line * dsc->first_line_bpg_offset;
-
- hrd_delay = DIV_ROUND_UP(min_rate_buffer_size, dsc->bits_per_pixel);
-
- dsc->initial_dec_delay = hrd_delay - dsc->initial_xmit_delay;
-
- dsc->initial_scale_value = 8 * dsc->rc_model_size /
- (dsc->rc_model_size - dsc->initial_offset);
-
- slice_bits = 8 * dsc->slice_chunk_size * dsc->slice_height;
-
- groups_total = groups_per_line * dsc->slice_height;
-
- data = dsc->first_line_bpg_offset * 2048;
-
- dsc->nfl_bpg_offset = DIV_ROUND_UP(data, (dsc->slice_height - 1));
-
- pre_num_extra_mux_bits = 3 * (mux_words_size + (4 * dsc->bits_per_component + 4) - 2);
-
- num_extra_mux_bits = pre_num_extra_mux_bits - (mux_words_size -
- ((slice_bits - pre_num_extra_mux_bits) % mux_words_size));
-
- data = 2048 * (dsc->rc_model_size - dsc->initial_offset + num_extra_mux_bits);
- dsc->slice_bpg_offset = DIV_ROUND_UP(data, groups_total);
-
- /* bpp * 16 + 0.5 */
- data = dsc->bits_per_pixel * 16;
- data *= 2;
- data++;
- data /= 2;
- target_bpp_x16 = data;
-
- data = (dsc->initial_xmit_delay * target_bpp_x16) / 16;
- final_value = dsc->rc_model_size - data + num_extra_mux_bits;
- dsc->final_offset = final_value;
-
- final_scale = 8 * dsc->rc_model_size / (dsc->rc_model_size - final_value);
-
- data = (final_scale - 9) * (dsc->nfl_bpg_offset + dsc->slice_bpg_offset);
- dsc->scale_increment_interval = (2048 * dsc->final_offset) / data;
-
- dsc->scale_decrement_interval = groups_per_line / (dsc->initial_scale_value - 8);
-
- return 0;
+ return drm_dsc_compute_rc_parameters(dsc);
}
static int dsi_host_parse_dt(struct msm_dsi_host *msm_host)
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index 7fc0975cb869332c653ebea99d038cdc8dce72e6..ee6051367679fd833a0d935991d79481935e4435 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -549,6 +549,8 @@ static const struct of_device_id dsi_phy_dt_match[] = {
#ifdef CONFIG_DRM_MSM_DSI_14NM_PHY
{ .compatible = "qcom,dsi-phy-14nm",
.data = &dsi_phy_14nm_cfgs },
+ { .compatible = "qcom,dsi-phy-14nm-2290",
+ .data = &dsi_phy_14nm_2290_cfgs },
{ .compatible = "qcom,dsi-phy-14nm-660",
.data = &dsi_phy_14nm_660_cfgs },
{ .compatible = "qcom,dsi-phy-14nm-8953",
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index 60a99c6525b20aa3a179c784dc68426d4ce90557..1096afedd6166612cc588e86844a5862ba6c241e 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -50,6 +50,7 @@ extern const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_14nm_660_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_14nm_2290_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_14nm_8953_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_10nm_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_10nm_8998_cfgs;
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
index 0f8f4ca464291e52718c27fcc211d59a9214de87..9f488adea7f543511de686e1725039fd489f8d97 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
@@ -1081,3 +1081,20 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_8953_cfgs = {
.io_start = { 0x1a94400, 0x1a96400 },
.num_dsi_phy = 2,
};
+
+const struct msm_dsi_phy_cfg dsi_phy_14nm_2290_cfgs = {
+ .has_phy_lane = true,
+ .regulator_data = dsi_phy_14nm_17mA_regulators,
+ .num_regulators = ARRAY_SIZE(dsi_phy_14nm_17mA_regulators),
+ .ops = {
+ .enable = dsi_14nm_phy_enable,
+ .disable = dsi_14nm_phy_disable,
+ .pll_init = dsi_pll_14nm_init,
+ .save_pll_state = dsi_14nm_pll_save_state,
+ .restore_pll_state = dsi_14nm_pll_restore_state,
+ },
+ .min_pll_rate = VCO_MIN_RATE,
+ .max_pll_rate = VCO_MAX_RATE,
+ .io_start = { 0x5e94400 },
+ .num_dsi_phy = 1,
+};
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index f28fb21e38911ec41866159f52dcd69b78e84c03..4d3fdc806befda16e4b46ac94d4b1a7aca90518a 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -68,16 +68,17 @@ static void msm_hdmi_destroy(struct hdmi *hdmi)
destroy_workqueue(hdmi->workq);
msm_hdmi_hdcp_destroy(hdmi);
+ if (hdmi->i2c)
+ msm_hdmi_i2c_destroy(hdmi->i2c);
+}
+
+static void msm_hdmi_put_phy(struct hdmi *hdmi)
+{
if (hdmi->phy_dev) {
put_device(hdmi->phy_dev);
hdmi->phy = NULL;
hdmi->phy_dev = NULL;
}
-
- if (hdmi->i2c)
- msm_hdmi_i2c_destroy(hdmi->i2c);
-
- platform_set_drvdata(hdmi->pdev, NULL);
}
static int msm_hdmi_get_phy(struct hdmi *hdmi)
@@ -93,22 +94,18 @@ static int msm_hdmi_get_phy(struct hdmi *hdmi)
}
phy_pdev = of_find_device_by_node(phy_node);
- if (phy_pdev)
- hdmi->phy = platform_get_drvdata(phy_pdev);
-
of_node_put(phy_node);
- if (!phy_pdev) {
- DRM_DEV_ERROR(&pdev->dev, "phy driver is not ready\n");
- return -EPROBE_DEFER;
- }
+ if (!phy_pdev)
+ return dev_err_probe(&pdev->dev, -EPROBE_DEFER, "phy driver is not ready\n");
+
+ hdmi->phy = platform_get_drvdata(phy_pdev);
if (!hdmi->phy) {
- DRM_DEV_ERROR(&pdev->dev, "phy driver is not ready\n");
put_device(&phy_pdev->dev);
- return -EPROBE_DEFER;
+ return dev_err_probe(&pdev->dev, -EPROBE_DEFER, "phy driver is not ready\n");
}
- hdmi->phy_dev = get_device(&phy_pdev->dev);
+ hdmi->phy_dev = &phy_pdev->dev;
return 0;
}
@@ -117,142 +114,10 @@ static int msm_hdmi_get_phy(struct hdmi *hdmi)
* we are to EPROBE_DEFER we want to do it here, rather than later
* at modeset_init() time
*/
-static struct hdmi *msm_hdmi_init(struct platform_device *pdev)
+static int msm_hdmi_init(struct hdmi *hdmi)
{
- struct hdmi_platform_config *config = pdev->dev.platform_data;
- struct hdmi *hdmi = NULL;
- struct resource *res;
- int i, ret;
-
- hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
- if (!hdmi) {
- ret = -ENOMEM;
- goto fail;
- }
-
- hdmi->pdev = pdev;
- hdmi->config = config;
- spin_lock_init(&hdmi->reg_lock);
-
- ret = drm_of_find_panel_or_bridge(pdev->dev.of_node, 1, 0, NULL, &hdmi->next_bridge);
- if (ret && ret != -ENODEV)
- goto fail;
-
- hdmi->mmio = msm_ioremap(pdev, config->mmio_name);
- if (IS_ERR(hdmi->mmio)) {
- ret = PTR_ERR(hdmi->mmio);
- goto fail;
- }
-
- /* HDCP needs physical address of hdmi register */
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- config->mmio_name);
- if (!res) {
- ret = -EINVAL;
- goto fail;
- }
- hdmi->mmio_phy_addr = res->start;
-
- hdmi->qfprom_mmio = msm_ioremap(pdev, config->qfprom_mmio_name);
- if (IS_ERR(hdmi->qfprom_mmio)) {
- DRM_DEV_INFO(&pdev->dev, "can't find qfprom resource\n");
- hdmi->qfprom_mmio = NULL;
- }
-
- hdmi->hpd_regs = devm_kcalloc(&pdev->dev,
- config->hpd_reg_cnt,
- sizeof(hdmi->hpd_regs[0]),
- GFP_KERNEL);
- if (!hdmi->hpd_regs) {
- ret = -ENOMEM;
- goto fail;
- }
- for (i = 0; i < config->hpd_reg_cnt; i++)
- hdmi->hpd_regs[i].supply = config->hpd_reg_names[i];
-
- ret = devm_regulator_bulk_get(&pdev->dev, config->hpd_reg_cnt, hdmi->hpd_regs);
- if (ret) {
- DRM_DEV_ERROR(&pdev->dev, "failed to get hpd regulator: %d\n", ret);
- goto fail;
- }
-
- hdmi->pwr_regs = devm_kcalloc(&pdev->dev,
- config->pwr_reg_cnt,
- sizeof(hdmi->pwr_regs[0]),
- GFP_KERNEL);
- if (!hdmi->pwr_regs) {
- ret = -ENOMEM;
- goto fail;
- }
-
- for (i = 0; i < config->pwr_reg_cnt; i++)
- hdmi->pwr_regs[i].supply = config->pwr_reg_names[i];
-
- ret = devm_regulator_bulk_get(&pdev->dev, config->pwr_reg_cnt, hdmi->pwr_regs);
- if (ret) {
- DRM_DEV_ERROR(&pdev->dev, "failed to get pwr regulator: %d\n", ret);
- goto fail;
- }
-
- hdmi->hpd_clks = devm_kcalloc(&pdev->dev,
- config->hpd_clk_cnt,
- sizeof(hdmi->hpd_clks[0]),
- GFP_KERNEL);
- if (!hdmi->hpd_clks) {
- ret = -ENOMEM;
- goto fail;
- }
- for (i = 0; i < config->hpd_clk_cnt; i++) {
- struct clk *clk;
-
- clk = msm_clk_get(pdev, config->hpd_clk_names[i]);
- if (IS_ERR(clk)) {
- ret = PTR_ERR(clk);
- DRM_DEV_ERROR(&pdev->dev, "failed to get hpd clk: %s (%d)\n",
- config->hpd_clk_names[i], ret);
- goto fail;
- }
-
- hdmi->hpd_clks[i] = clk;
- }
-
- hdmi->pwr_clks = devm_kcalloc(&pdev->dev,
- config->pwr_clk_cnt,
- sizeof(hdmi->pwr_clks[0]),
- GFP_KERNEL);
- if (!hdmi->pwr_clks) {
- ret = -ENOMEM;
- goto fail;
- }
- for (i = 0; i < config->pwr_clk_cnt; i++) {
- struct clk *clk;
-
- clk = msm_clk_get(pdev, config->pwr_clk_names[i]);
- if (IS_ERR(clk)) {
- ret = PTR_ERR(clk);
- DRM_DEV_ERROR(&pdev->dev, "failed to get pwr clk: %s (%d)\n",
- config->pwr_clk_names[i], ret);
- goto fail;
- }
-
- hdmi->pwr_clks[i] = clk;
- }
-
- hdmi->hpd_gpiod = devm_gpiod_get_optional(&pdev->dev, "hpd", GPIOD_IN);
- /* This will catch e.g. -EPROBE_DEFER */
- if (IS_ERR(hdmi->hpd_gpiod)) {
- ret = PTR_ERR(hdmi->hpd_gpiod);
- DRM_DEV_ERROR(&pdev->dev, "failed to get hpd gpio: (%d)\n", ret);
- goto fail;
- }
-
- if (!hdmi->hpd_gpiod)
- DBG("failed to get HPD gpio");
-
- if (hdmi->hpd_gpiod)
- gpiod_set_consumer_name(hdmi->hpd_gpiod, "HDMI_HPD");
-
- pm_runtime_enable(&pdev->dev);
+ struct platform_device *pdev = hdmi->pdev;
+ int ret;
hdmi->workq = alloc_ordered_workqueue("msm_hdmi", 0);
@@ -264,25 +129,18 @@ static struct hdmi *msm_hdmi_init(struct platform_device *pdev)
goto fail;
}
- ret = msm_hdmi_get_phy(hdmi);
- if (ret) {
- DRM_DEV_ERROR(&pdev->dev, "failed to get phy\n");
- goto fail;
- }
-
hdmi->hdcp_ctrl = msm_hdmi_hdcp_init(hdmi);
if (IS_ERR(hdmi->hdcp_ctrl)) {
dev_warn(&pdev->dev, "failed to init hdcp: disabled\n");
hdmi->hdcp_ctrl = NULL;
}
- return hdmi;
+ return 0;
fail:
- if (hdmi)
- msm_hdmi_destroy(hdmi);
+ msm_hdmi_destroy(hdmi);
- return ERR_PTR(ret);
+ return ret;
}
/* Second part of initialization, the drm/kms level modeset_init,
@@ -297,7 +155,6 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
struct drm_device *dev, struct drm_encoder *encoder)
{
struct msm_drm_private *priv = dev->dev_private;
- struct platform_device *pdev = hdmi->pdev;
int ret;
if (priv->num_bridges == ARRAY_SIZE(priv->bridges)) {
@@ -337,13 +194,6 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
drm_connector_attach_encoder(hdmi->connector, hdmi->encoder);
- hdmi->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
- if (!hdmi->irq) {
- ret = -EINVAL;
- DRM_DEV_ERROR(dev->dev, "failed to get irq\n");
- goto fail;
- }
-
ret = devm_request_irq(dev->dev, hdmi->irq,
msm_hdmi_irq, IRQF_TRIGGER_HIGH,
"hdmi_isr", hdmi);
@@ -363,8 +213,6 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
priv->bridges[priv->num_bridges++] = hdmi->bridge;
- platform_set_drvdata(pdev, hdmi);
-
return 0;
fail:
@@ -392,7 +240,7 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
static const char *hpd_reg_names_8960[] = {"core-vdda"};
static const char *hpd_clk_names_8960[] = {"core", "master_iface", "slave_iface"};
-static struct hdmi_platform_config hdmi_tx_8960_config = {
+static const struct hdmi_platform_config hdmi_tx_8960_config = {
HDMI_CFG(hpd_reg, 8960),
HDMI_CFG(hpd_clk, 8960),
};
@@ -402,7 +250,7 @@ static const char *pwr_clk_names_8x74[] = {"extp", "alt_iface"};
static const char *hpd_clk_names_8x74[] = {"iface", "core", "mdp_core"};
static unsigned long hpd_clk_freq_8x74[] = {0, 19200000, 0};
-static struct hdmi_platform_config hdmi_tx_8974_config = {
+static const struct hdmi_platform_config hdmi_tx_8974_config = {
HDMI_CFG(pwr_reg, 8x74),
HDMI_CFG(pwr_clk, 8x74),
HDMI_CFG(hpd_clk, 8x74),
@@ -517,26 +365,12 @@ static int msm_hdmi_register_audio_driver(struct hdmi *hdmi, struct device *dev)
static int msm_hdmi_bind(struct device *dev, struct device *master, void *data)
{
struct msm_drm_private *priv = dev_get_drvdata(master);
- struct hdmi_platform_config *hdmi_cfg;
- struct hdmi *hdmi;
- struct device_node *of_node = dev->of_node;
+ struct hdmi *hdmi = dev_get_drvdata(dev);
int err;
- hdmi_cfg = (struct hdmi_platform_config *)
- of_device_get_match_data(dev);
- if (!hdmi_cfg) {
- DRM_DEV_ERROR(dev, "unknown hdmi_cfg: %pOFn\n", of_node);
- return -ENXIO;
- }
-
- hdmi_cfg->mmio_name = "core_physical";
- hdmi_cfg->qfprom_mmio_name = "qfprom_physical";
-
- dev->platform_data = hdmi_cfg;
-
- hdmi = msm_hdmi_init(to_platform_device(dev));
- if (IS_ERR(hdmi))
- return PTR_ERR(hdmi);
+ err = msm_hdmi_init(hdmi);
+ if (err)
+ return err;
priv->hdmi = hdmi;
err = msm_hdmi_register_audio_driver(hdmi, dev);
@@ -569,12 +403,150 @@ static const struct component_ops msm_hdmi_ops = {
static int msm_hdmi_dev_probe(struct platform_device *pdev)
{
+ const struct hdmi_platform_config *config;
+ struct device *dev = &pdev->dev;
+ struct hdmi *hdmi;
+ struct resource *res;
+ int i, ret;
+
+ config = of_device_get_match_data(dev);
+ if (!config)
+ return -EINVAL;
+
+ hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
+ if (!hdmi)
+ return -ENOMEM;
+
+ hdmi->pdev = pdev;
+ hdmi->config = config;
+ spin_lock_init(&hdmi->reg_lock);
+
+ ret = drm_of_find_panel_or_bridge(pdev->dev.of_node, 1, 0, NULL, &hdmi->next_bridge);
+ if (ret && ret != -ENODEV)
+ return ret;
+
+ hdmi->mmio = msm_ioremap(pdev, "core_physical");
+ if (IS_ERR(hdmi->mmio))
+ return PTR_ERR(hdmi->mmio);
+
+ /* HDCP needs physical address of hdmi register */
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "core_physical");
+ if (!res)
+ return -EINVAL;
+ hdmi->mmio_phy_addr = res->start;
+
+ hdmi->qfprom_mmio = msm_ioremap(pdev, "qfprom_physical");
+ if (IS_ERR(hdmi->qfprom_mmio)) {
+ DRM_DEV_INFO(&pdev->dev, "can't find qfprom resource\n");
+ hdmi->qfprom_mmio = NULL;
+ }
+
+ hdmi->irq = platform_get_irq(pdev, 0);
+ if (hdmi->irq < 0)
+ return hdmi->irq;
+
+ hdmi->hpd_regs = devm_kcalloc(&pdev->dev,
+ config->hpd_reg_cnt,
+ sizeof(hdmi->hpd_regs[0]),
+ GFP_KERNEL);
+ if (!hdmi->hpd_regs)
+ return -ENOMEM;
+
+ for (i = 0; i < config->hpd_reg_cnt; i++)
+ hdmi->hpd_regs[i].supply = config->hpd_reg_names[i];
+
+ ret = devm_regulator_bulk_get(&pdev->dev, config->hpd_reg_cnt, hdmi->hpd_regs);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to get hpd regulators\n");
+
+ hdmi->pwr_regs = devm_kcalloc(&pdev->dev,
+ config->pwr_reg_cnt,
+ sizeof(hdmi->pwr_regs[0]),
+ GFP_KERNEL);
+ if (!hdmi->pwr_regs)
+ return -ENOMEM;
+
+ for (i = 0; i < config->pwr_reg_cnt; i++)
+ hdmi->pwr_regs[i].supply = config->pwr_reg_names[i];
+
+ ret = devm_regulator_bulk_get(&pdev->dev, config->pwr_reg_cnt, hdmi->pwr_regs);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to get pwr regulators\n");
+
+ hdmi->hpd_clks = devm_kcalloc(&pdev->dev,
+ config->hpd_clk_cnt,
+ sizeof(hdmi->hpd_clks[0]),
+ GFP_KERNEL);
+ if (!hdmi->hpd_clks)
+ return -ENOMEM;
+
+ for (i = 0; i < config->hpd_clk_cnt; i++) {
+ struct clk *clk;
+
+ clk = msm_clk_get(pdev, config->hpd_clk_names[i]);
+ if (IS_ERR(clk))
+ return dev_err_probe(dev, PTR_ERR(clk),
+ "failed to get hpd clk: %s\n",
+ config->hpd_clk_names[i]);
+
+ hdmi->hpd_clks[i] = clk;
+ }
+
+ hdmi->pwr_clks = devm_kcalloc(&pdev->dev,
+ config->pwr_clk_cnt,
+ sizeof(hdmi->pwr_clks[0]),
+ GFP_KERNEL);
+ if (!hdmi->pwr_clks)
+ return -ENOMEM;
+
+ for (i = 0; i < config->pwr_clk_cnt; i++) {
+ struct clk *clk;
+
+ clk = msm_clk_get(pdev, config->pwr_clk_names[i]);
+ if (IS_ERR(clk))
+ return dev_err_probe(dev, PTR_ERR(clk),
+ "failed to get pwr clk: %s\n",
+ config->pwr_clk_names[i]);
+
+ hdmi->pwr_clks[i] = clk;
+ }
+
+ hdmi->hpd_gpiod = devm_gpiod_get_optional(&pdev->dev, "hpd", GPIOD_IN);
+ /* This will catch e.g. -EPROBE_DEFER */
+ if (IS_ERR(hdmi->hpd_gpiod))
+ return dev_err_probe(dev, PTR_ERR(hdmi->hpd_gpiod),
+ "failed to get hpd gpio\n");
+
+ if (!hdmi->hpd_gpiod)
+ DBG("failed to get HPD gpio");
+
+ if (hdmi->hpd_gpiod)
+ gpiod_set_consumer_name(hdmi->hpd_gpiod, "HDMI_HPD");
+
+ ret = msm_hdmi_get_phy(hdmi);
+ if (ret) {
+ DRM_DEV_ERROR(&pdev->dev, "failed to get phy\n");
+ return ret;
+ }
+
+ ret = devm_pm_runtime_enable(&pdev->dev);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, hdmi);
+
return component_add(&pdev->dev, &msm_hdmi_ops);
}
static int msm_hdmi_dev_remove(struct platform_device *pdev)
{
+ struct hdmi *hdmi = dev_get_drvdata(&pdev->dev);
+
component_del(&pdev->dev, &msm_hdmi_ops);
+
+ msm_hdmi_put_phy(hdmi);
+
return 0;
}
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
index 04a74381aaf7c213eec774ba541903d2aee19c6c..e8dbee50637fa5a382d5448d83f7665d11efbae3 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
@@ -86,9 +86,6 @@ struct hdmi {
/* platform config data (ie. from DT, or pdata) */
struct hdmi_platform_config {
- const char *mmio_name;
- const char *qfprom_mmio_name;
-
/* regulators that need to be on for hpd: */
const char **hpd_reg_names;
int hpd_reg_cnt;
diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
index 6a4549ef34d408fb69f2a8117bdb6eb2d85f038b..86b28add1ffff4f32eba624b34a761479fe87811 100644
--- a/drivers/gpu/drm/msm/msm_mdss.c
+++ b/drivers/gpu/drm/msm/msm_mdss.c
@@ -280,6 +280,10 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss)
/* UBWC_2_0 */
msm_mdss_setup_ubwc_dec_20(msm_mdss, 0x1e);
break;
+ case DPU_HW_VER_630:
+ /* UBWC_2_0 */
+ msm_mdss_setup_ubwc_dec_20(msm_mdss, 0x11f);
+ break;
case DPU_HW_VER_720:
msm_mdss_setup_ubwc_dec_40(msm_mdss, UBWC_3_0, 6, 1, 1, 1);
break;
@@ -509,6 +513,7 @@ static const struct of_device_id mdss_dt_match[] = {
{ .compatible = "qcom,sc7180-mdss" },
{ .compatible = "qcom,sc7280-mdss" },
{ .compatible = "qcom,sc8180x-mdss" },
+ { .compatible = "qcom,sm6115-mdss" },
{ .compatible = "qcom,sm8150-mdss" },
{ .compatible = "qcom,sm8250-mdss" },
{}