Qualcomm ARM64 DT updates for 5.11 For SM8250 the recently introduced support for handling boot-loader stream mappings in the ARM SMMU allow us to enable this, and thereby USB controller and PHY, SDHCI controller and FastRPC, as well as support for the SM8250 HDK board has been added. Additionally PRNG and RTC is enabled. Similarly for SM8150, the ARM SMMU could be added which allows the secondary USB controller and PHYs, as well as WiFi to be added and support for the SM8150 HDK board to be introduced. Additionally Coresight and support for the last-level cache controller was added. MSM8916 finally has VDDCX and VDDMX removed as regulators and are now handled by the rpmpd driver for the devices controlling them. The Longsheer L8150 gains touchscreen, sensors, vibrator and LED support. MSM8992 gains USB and SDHCI support as well as an I2C controller and the associated RMI4 based touchscreen for the Lumia 950. MSM8994 also gains USB and SDHCI support, as well as VADC and temp-alarm support. Then support for the Lumia 950 XL is added. SDM845 gains interconnect properties for a number of devices and the GENI wrappers gains iommu stream configuration, which means DMA operations on e.g. I2C now works. The Lenovo Yoga C630 finally has the SMMU enabled, a few fixes and the description of the eDP bridge and panel means that the laptop can now boot mainline with working display, GPU, WiFi and audio. SC7180 gains a slew of smaller improvements and fixes.