Commit acff29b3 authored by Alexandros Frantzis's avatar Alexandros Frantzis Committed by Pekka Paalanen

libweston: Support zwp_surface_synchronization_v1.set_acquire_fence

Implement the set_acquire_fence request of the
zwp_surface_synchronization_v1 interface.

The implementation uses the acquire fence in two ways:

1. If the associated buffer is used as GL render source, an
   EGLSyncKHR is created from the fence and used to synchronize
   access.
2. If the associated buffer is used as a plane framebuffer,
   the acquire fence is treated as an in-fence for the atomic
   commit operation. If in-fences are not supported and the buffer
   has an acquire fence, we don't consider it for plane placement.

If the used compositor/renderer doesn't support explicit
synchronization, we don't advertise the protocol at all. Currently only
the DRM and X11 backends when using the GL renderer advertise the
protocol for production use.

Issues for discussion
---------------------

a. Currently, a server-side wait of EGLSyncKHR is performed before
   using the EGLImage/texture during rendering. Unfortunately, it's not clear
   from the specs whether this is generally safe to do, or we need to
   sync before glEGLImageTargetTexture2DOES. The exception is
   TEXTURE_EXTERNAL_OES where the spec mentions it's enough to sync
   and then glBindTexture for any changes to take effect.

Changes in v5:
  - Meson support.
  - Make explicit sync server error reporting more generic, supporting
    all explicit sync related interfaces not just
    wp_linux_surface_synchronization.
  - Fix typo in warning for missing EGL_KHR_wait_sync extension.
  - Support minor version 2 of the explicit sync protocol (i.e., support
    fences for opaque EGL buffers).

Changes in v4:
  - Introduce and use fd_clear and and fd_move helpers.
  - Don't check for a valid buffer when updating surface acquire fence fd
    from state.
  - Assert that pending state acquire fence fd is always clear
    after a commit.
  - Clarify that WESTON_CAP_EXPLICIT_SYNC applies to just the
    renderer.
  - Check for EGL_KHR_wait_sync before using eglWaitSyncKHR.
  - Dup the acquire fence before passing to EGL.

Changes in v3:
  - Keep acquire_fence_fd in surface instead of buffer.
  - Clarify that WESTON_CAP_EXPLICIT_SYNC applies to both backend and
    renderer.
  - Move comment about non-ownership of in_fence_fd to struct
    drm_plane_state definition.
  - Assert that we don't try to use planes with in-fences when using the
    legacy KMS API.
  - Remove unnecessary info from wayland error messages.
  - Handle acquire fence for subsurface commits.
  - Guard against self-update in fd_update.
  - Disconnect the client if acquire fence EGLSyncKHR creation or wait
    fails.
  - Use updated protocol interface names.
  - User correct format specifier for resource ids.
  - Advertise protocol for X11 backend with GL renderer.

Changes in v2:
  - Remove sync file wait fallbacks.
  - Raise UNSUPPORTED_BUFFER error at commit if we have an acquire
    fence, but the committed buffer is not a valid linux_dmabuf.
  - Don't put buffers with in-fences on planes that don't support
    in-fences.
  - Don't advertise explicit sync protocol if backend does not
    support explicit sync.
Signed-off-by: Alexandros Frantzis's avatarAlexandros Frantzis <alexandros.frantzis@collabora.com>
parent c0e2f926
......@@ -96,10 +96,13 @@ libweston_@LIBWESTON_MAJOR@_la_SOURCES = \
libweston/linux-dmabuf.h \
libweston/linux-explicit-synchronization.c \
libweston/linux-explicit-synchronization.h \
libweston/linux-sync-file.c \
libweston/linux-sync-file.h \
libweston/pixel-formats.c \
libweston/pixel-formats.h \
libweston/weston-debug.c \
libweston/weston-debug.h \
shared/fd-util.h \
shared/helpers.h \
shared/matrix.c \
shared/matrix.h \
......
......@@ -66,6 +66,7 @@
#include "presentation-time-server-protocol.h"
#include "linux-dmabuf.h"
#include "linux-dmabuf-unstable-v1-server-protocol.h"
#include "linux-explicit-synchronization.h"
#ifndef DRM_CLIENT_CAP_ASPECT_RATIO
#define DRM_CLIENT_CAP_ASPECT_RATIO 4
......@@ -171,6 +172,7 @@ enum wdrm_plane_property {
WDRM_PLANE_FB_ID,
WDRM_PLANE_CRTC_ID,
WDRM_PLANE_IN_FORMATS,
WDRM_PLANE_IN_FENCE_FD,
WDRM_PLANE__COUNT
};
......@@ -213,6 +215,7 @@ static const struct drm_property_info plane_props[] = {
[WDRM_PLANE_FB_ID] = { .name = "FB_ID", },
[WDRM_PLANE_CRTC_ID] = { .name = "CRTC_ID", },
[WDRM_PLANE_IN_FORMATS] = { .name = "IN_FORMATS" },
[WDRM_PLANE_IN_FENCE_FD] = { .name = "IN_FENCE_FD" },
};
/**
......@@ -456,6 +459,9 @@ struct drm_plane_state {
bool complete;
/* We don't own the fd, so we shouldn't close it */
int in_fence_fd;
struct wl_list link; /* drm_output_state::plane_list */
};
......@@ -1381,6 +1387,7 @@ drm_plane_state_alloc(struct drm_output_state *state_output,
assert(state);
state->output_state = state_output;
state->plane = plane;
state->in_fence_fd = -1;
/* Here we only add the plane state to the desired link, and not
* set the member. Having an output pointer set means that the
......@@ -1411,6 +1418,7 @@ drm_plane_state_free(struct drm_plane_state *state, bool force)
wl_list_remove(&state->link);
wl_list_init(&state->link);
state->output_state = NULL;
state->in_fence_fd = -1;
if (force || state != state->plane->state_cur) {
drm_fb_unref(state->fb);
......@@ -2010,6 +2018,13 @@ drm_output_prepare_scanout_view(struct drm_output_state *output_state,
extents->y2 != output->base.y + output->base.height)
return NULL;
/* If the surface buffer has an in-fence fd, but the plane doesn't
* support fences, we can't place the buffer on this plane. */
if (ev->surface->acquire_fence_fd >= 0 &&
(!b->atomic_modeset ||
scanout_plane->props[WDRM_PLANE_IN_FENCE_FD].prop_id == 0))
return NULL;
fb = drm_fb_get_from_view(output_state, ev);
if (!fb) {
drm_debug(b, "\t\t\t\t[scanout] not placing view %p on scanout: "
......@@ -2049,6 +2064,8 @@ drm_output_prepare_scanout_view(struct drm_output_state *output_state,
state->src_h != state->dest_h << 16))
goto err;
state->in_fence_fd = ev->surface->acquire_fence_fd;
/* In plane-only mode, we don't need to test the state now, as we
* will only test it once at the end. */
return state;
......@@ -2293,6 +2310,8 @@ drm_output_apply_state_legacy(struct drm_output_state *state)
assert(scanout_state->dest_y == 0);
assert(scanout_state->dest_w == scanout_state->src_w >> 16);
assert(scanout_state->dest_h == scanout_state->src_h >> 16);
/* The legacy SetCrtc API doesn't support fences */
assert(scanout_state->in_fence_fd == -1);
mode = to_drm_mode(output->base.current_mode);
if (backend->state_invalid ||
......@@ -2351,6 +2370,8 @@ drm_output_apply_state_legacy(struct drm_output_state *state)
assert(!ps->complete);
assert(!ps->output || ps->output == output);
assert(!!ps->output == !!ps->fb);
/* The legacy SetPlane API doesn't support fences */
assert(ps->in_fence_fd == -1);
if (ps->fb && !backend->sprites_hidden)
fb_id = ps->fb->fb_id;
......@@ -2568,6 +2589,12 @@ drm_output_apply_state_atomic(struct drm_output_state *state,
(unsigned long) plane->plane_id,
pinfo ? pinfo->drm_format_name : "UNKNOWN");
if (plane_state->in_fence_fd >= 0) {
ret |= plane_add_prop(req, plane,
WDRM_PLANE_IN_FENCE_FD,
plane_state->in_fence_fd);
}
if (ret != 0) {
weston_log("couldn't set plane state\n");
return ret;
......@@ -3262,12 +3289,27 @@ drm_output_prepare_overlay_view(struct drm_output_state *output_state,
continue;
}
/* If the surface buffer has an in-fence fd, but the plane
* doesn't support fences, we can't place the buffer on this
* plane. */
if (ev->surface->acquire_fence_fd >= 0 &&
(!b->atomic_modeset ||
p->props[WDRM_PLANE_IN_FENCE_FD].prop_id == 0)) {
drm_debug(b, "\t\t\t\t[overlay] not placing view %p on overlay: "
"no in-fence support\n", ev);
drm_plane_state_put_back(state);
state = NULL;
continue;
}
/* We hold one reference for the lifetime of this function;
* from calling drm_fb_get_from_view, to the out label where
* we unconditionally drop the reference. So, we take another
* reference here to live within the state. */
state->fb = drm_fb_ref(fb);
state->in_fence_fd = ev->surface->acquire_fence_fd;
/* In planes-only mode, we don't have an incremental state to
* test against, so we just hope it'll work. */
if (mode == DRM_OUTPUT_PROPOSE_STATE_PLANES_ONLY) {
......@@ -7014,11 +7056,14 @@ switch_to_gl_renderer(struct drm_backend *b)
{
struct drm_output *output;
bool dmabuf_support_inited;
bool linux_explicit_sync_inited;
if (!b->use_pixman)
return;
dmabuf_support_inited = !!b->compositor->renderer->import_dmabuf;
linux_explicit_sync_inited =
b->compositor->capabilities & WESTON_CAP_EXPLICIT_SYNC;
weston_log("Switching to GL renderer\n");
......@@ -7051,6 +7096,13 @@ switch_to_gl_renderer(struct drm_backend *b)
weston_log("Error: initializing dmabuf "
"support failed.\n");
}
if (!linux_explicit_sync_inited &&
(b->compositor->capabilities & WESTON_CAP_EXPLICIT_SYNC)) {
if (linux_explicit_synchronization_setup(b->compositor) < 0)
weston_log("Error: initializing explicit "
" synchronization support failed.\n");
}
}
static void
......@@ -7482,6 +7534,12 @@ drm_backend_create(struct weston_compositor *compositor,
"support failed.\n");
}
if (compositor->capabilities & WESTON_CAP_EXPLICIT_SYNC) {
if (linux_explicit_synchronization_setup(compositor) < 0)
weston_log("Error: initializing explicit "
" synchronization support failed.\n");
}
ret = weston_plugin_api_register(compositor, WESTON_DRM_OUTPUT_API_NAME,
&api, sizeof(api));
......
......@@ -62,6 +62,7 @@
#include "pixman-renderer.h"
#include "presentation-time-server-protocol.h"
#include "linux-dmabuf.h"
#include "linux-explicit-synchronization.h"
#include "windowed-output-api.h"
#define DEFAULT_AXIS_STEP_DISTANCE 10
......@@ -1895,6 +1896,12 @@ x11_backend_create(struct weston_compositor *compositor,
"support failed.\n");
}
if (compositor->capabilities & WESTON_CAP_EXPLICIT_SYNC) {
if (linux_explicit_synchronization_setup(compositor) < 0)
weston_log("Error: initializing explicit "
" synchronization support failed.\n");
}
ret = weston_plugin_api_register(compositor, WESTON_WINDOWED_OUTPUT_API_NAME,
&api, sizeof(api));
......
......@@ -51,6 +51,7 @@
#include <sys/time.h>
#include <time.h>
#include <errno.h>
#include <inttypes.h>
#include "timeline.h"
......@@ -59,6 +60,8 @@
#include "linux-dmabuf.h"
#include "viewporter-server-protocol.h"
#include "presentation-time-server-protocol.h"
#include "linux-explicit-synchronization-unstable-v1-server-protocol.h"
#include "shared/fd-util.h"
#include "shared/helpers.h"
#include "shared/os-compatibility.h"
#include "shared/string-helpers.h"
......@@ -448,6 +451,8 @@ weston_surface_state_init(struct weston_surface_state *state)
state->buffer_viewport.buffer.src_width = wl_fixed_from_int(-1);
state->buffer_viewport.surface.width = -1;
state->buffer_viewport.changed = 0;
state->acquire_fence_fd = -1;
}
static void
......@@ -469,6 +474,8 @@ weston_surface_state_fini(struct weston_surface_state *state)
if (state->buffer)
wl_list_remove(&state->buffer_destroy_listener.link);
state->buffer = NULL;
fd_clear(&state->acquire_fence_fd);
}
static void
......@@ -525,6 +532,8 @@ weston_surface_create(struct weston_compositor *compositor)
wl_list_init(&surface->pointer_constraints);
surface->acquire_fence_fd = -1;
return surface;
}
......@@ -2017,6 +2026,8 @@ weston_surface_destroy(struct weston_surface *surface)
link)
weston_pointer_constraint_destroy(constraint);
fd_clear(&surface->acquire_fence_fd);
free(surface);
}
......@@ -3216,9 +3227,15 @@ weston_surface_commit_state(struct weston_surface *surface,
surface->buffer_viewport = state->buffer_viewport;
/* wl_surface.attach */
if (state->newly_attached)
if (state->newly_attached) {
/* zwp_surface_synchronization_v1.set_acquire_fence */
fd_move(&surface->acquire_fence_fd,
&state->acquire_fence_fd);
weston_surface_attach(surface, state->buffer);
}
weston_surface_state_set_buffer(state, NULL);
assert(state->acquire_fence_fd == -1);
weston_surface_build_buffer_matrix(surface,
&surface->surface_to_buffer_matrix);
......@@ -3329,6 +3346,35 @@ surface_commit(struct wl_client *client, struct wl_resource *resource)
return;
}
if (surface->pending.acquire_fence_fd >= 0) {
assert(surface->synchronization_resource);
if (!surface->pending.buffer) {
fd_clear(&surface->pending.acquire_fence_fd);
wl_resource_post_error(surface->synchronization_resource,
ZWP_LINUX_SURFACE_SYNCHRONIZATION_V1_ERROR_NO_BUFFER,
"wl_surface@%"PRIu32" no buffer for synchronization",
wl_resource_get_id(resource));
return;
}
/* We support fences for both wp_linux_dmabuf and opaque EGL
* buffers, as mandated by minor version 2 of the
* zwp_linux_explicit_synchronization_v1 protocol. Since
* renderers that support fences currently only support these
* two buffer types plus SHM buffers, we can just check for the
* SHM buffer case here.
*/
if (wl_shm_buffer_get(surface->pending.buffer->resource)) {
fd_clear(&surface->pending.acquire_fence_fd);
wl_resource_post_error(surface->synchronization_resource,
ZWP_LINUX_SURFACE_SYNCHRONIZATION_V1_ERROR_UNSUPPORTED_BUFFER,
"wl_surface@%"PRIu32" unsupported buffer for synchronization",
wl_resource_get_id(resource));
return;
}
}
if (sub) {
weston_subsurface_commit(sub);
return;
......@@ -3535,7 +3581,11 @@ weston_subsurface_commit_to_cache(struct weston_subsurface *sub)
surface->pending.buffer);
weston_presentation_feedback_discard_list(
&sub->cached.feedback_list);
/* zwp_surface_synchronization_v1.set_acquire_fence */
fd_move(&sub->cached.acquire_fence_fd,
&surface->pending.acquire_fence_fd);
}
assert(surface->pending.acquire_fence_fd == -1);
sub->cached.sx += surface->pending.sx;
sub->cached.sy += surface->pending.sy;
......
......@@ -942,6 +942,9 @@ enum weston_capability {
/* renderer supports weston_view_set_mask() clipping */
WESTON_CAP_VIEW_CLIP_MASK = 0x0010,
/* renderer supports explicit synchronization */
WESTON_CAP_EXPLICIT_SYNC = 0x0020,
};
/* Configuration struct for a backend.
......@@ -1362,6 +1365,9 @@ struct weston_surface_state {
/* wp_viewport.set_source */
/* wp_viewport.set_destination */
struct weston_buffer_viewport buffer_viewport;
/* zwp_surface_synchronization_v1.set_acquire_fence */
int acquire_fence_fd;
};
struct weston_surface_activation_data {
......@@ -1489,6 +1495,7 @@ struct weston_surface {
/* zwp_surface_synchronization_v1 resource for this surface */
struct wl_resource *synchronization_resource;
int acquire_fence_fd;
};
struct weston_subsurface {
......
......@@ -49,6 +49,7 @@
#include "vertex-clipping.h"
#include "linux-dmabuf.h"
#include "linux-dmabuf-unstable-v1-server-protocol.h"
#include "linux-explicit-synchronization.h"
#include "pixel-formats.h"
#include "shared/helpers.h"
......@@ -258,6 +259,9 @@ struct gl_renderer {
PFNEGLCREATESYNCKHRPROC create_sync;
PFNEGLDESTROYSYNCKHRPROC destroy_sync;
PFNEGLDUPNATIVEFENCEFDANDROIDPROC dup_native_fence_fd;
int has_wait_sync;
PFNEGLWAITSYNCKHRPROC wait_sync;
};
enum timeline_render_point_type {
......@@ -861,6 +865,72 @@ shader_uniforms(struct gl_shader *shader,
glUniform1i(shader->tex_uniforms[i], i);
}
static int
ensure_surface_buffer_is_ready(struct gl_renderer *gr,
struct gl_surface_state *gs)
{
EGLint attribs[] = {
EGL_SYNC_NATIVE_FENCE_FD_ANDROID,
-1,
EGL_NONE
};
struct weston_surface *surface = gs->surface;
struct weston_buffer *buffer = gs->buffer_ref.buffer;
EGLSyncKHR sync;
EGLint wait_ret;
EGLint destroy_ret;
if (!buffer)
return 0;
if (surface->acquire_fence_fd < 0)
return 0;
/* We should only get a fence if we support EGLSyncKHR, since
* we don't advertise the explicit sync protocol otherwise. */
assert(gr->has_native_fence_sync);
/* We should only get a fence for non-SHM buffers, since surface
* commit would have failed otherwise. */
assert(wl_shm_buffer_get(buffer->resource) == NULL);
attribs[1] = dup(surface->acquire_fence_fd);
if (attribs[1] == -1) {
linux_explicit_synchronization_send_server_error(
gs->surface->synchronization_resource,
"Failed to dup acquire fence");
return -1;
}
sync = gr->create_sync(gr->egl_display,
EGL_SYNC_NATIVE_FENCE_ANDROID,
attribs);
if (sync == EGL_NO_SYNC_KHR) {
linux_explicit_synchronization_send_server_error(
gs->surface->synchronization_resource,
"Failed to create EGLSyncKHR object");
close(attribs[1]);
return -1;
}
wait_ret = gr->wait_sync(gr->egl_display, sync, 0);
if (wait_ret == EGL_FALSE) {
linux_explicit_synchronization_send_server_error(
gs->surface->synchronization_resource,
"Failed to wait on EGLSyncKHR object");
/* Continue to try to destroy the sync object. */
}
destroy_ret = gr->destroy_sync(gr->egl_display, sync);
if (destroy_ret == EGL_FALSE) {
linux_explicit_synchronization_send_server_error(
gs->surface->synchronization_resource,
"Failed to destroy on EGLSyncKHR object");
}
return (wait_ret == EGL_TRUE && destroy_ret == EGL_TRUE) ? 0 : -1;
}
static void
draw_view(struct weston_view *ev, struct weston_output *output,
pixman_region32_t *damage) /* in global coordinates */
......@@ -891,6 +961,9 @@ draw_view(struct weston_view *ev, struct weston_output *output,
if (!pixman_region32_not_empty(&repaint))
goto out;
if (ensure_surface_buffer_is_ready(gr, gs) < 0)
goto out;
glBlendFunc(GL_ONE, GL_ONE_MINUS_SRC_ALPHA);
if (gr->fan_debug) {
......@@ -3288,8 +3361,17 @@ gl_renderer_setup_egl_extensions(struct weston_compositor *ec)
(void *) eglGetProcAddress("eglDupNativeFenceFDANDROID");
gr->has_native_fence_sync = 1;
} else {
weston_log("warning: Disabling render GPU timeline due to "
"missing EGL_ANDROID_native_fence_sync extension\n");
weston_log("warning: Disabling render GPU timeline and explicit "
"synchronization due to missing "
"EGL_ANDROID_native_fence_sync extension\n");
}
if (weston_check_egl_extension(extensions, "EGL_KHR_wait_sync")) {
gr->wait_sync = (void *) eglGetProcAddress("eglWaitSyncKHR");
gr->has_wait_sync = 1;
} else {
weston_log("warning: Disabling explicit synchronization due"
"to missing EGL_KHR_wait_sync extension\n");
}
renderer_setup_egl_client_extensions(gr);
......@@ -3521,13 +3603,16 @@ gl_renderer_display_create(struct weston_compositor *ec, EGLenum platform,
}
ec->renderer = &gr->base;
ec->capabilities |= WESTON_CAP_ROTATION_ANY;
ec->capabilities |= WESTON_CAP_CAPTURE_YFLIP;
ec->capabilities |= WESTON_CAP_VIEW_CLIP_MASK;
if (gl_renderer_setup_egl_extensions(ec) < 0)
goto fail_with_error;
ec->capabilities |= WESTON_CAP_ROTATION_ANY;
ec->capabilities |= WESTON_CAP_CAPTURE_YFLIP;
ec->capabilities |= WESTON_CAP_VIEW_CLIP_MASK;
if (gr->has_native_fence_sync && gr->has_wait_sync)
ec->capabilities |= WESTON_CAP_EXPLICIT_SYNC;
wl_list_init(&gr->dmabuf_images);
if (gr->has_dmabuf_import) {
gr->base.import_dmabuf = gl_renderer_import_dmabuf;
......
......@@ -25,11 +25,14 @@
#include "config.h"
#include <assert.h>
#include <inttypes.h>
#include "compositor.h"
#include "linux-explicit-synchronization.h"
#include "linux-explicit-synchronization-unstable-v1-server-protocol.h"
#include "linux-sync-file.h"
#include "shared/fd-util.h"
static void
destroy_linux_surface_synchronization(struct wl_resource *resource)
......@@ -37,8 +40,10 @@ destroy_linux_surface_synchronization(struct wl_resource *resource)
struct weston_surface *surface =
wl_resource_get_user_data(resource);
if (surface)
if (surface) {
fd_clear(&surface->pending.acquire_fence_fd);
surface->synchronization_resource = NULL;
}
}
static void
......@@ -53,7 +58,38 @@ linux_surface_synchronization_set_acquire_fence(struct wl_client *client,
struct wl_resource *resource,
int32_t fd)
{
wl_client_post_no_memory(client);
struct weston_surface *surface = wl_resource_get_user_data(resource);
if (!surface) {
wl_resource_post_error(
resource,
ZWP_LINUX_SURFACE_SYNCHRONIZATION_V1_ERROR_NO_SURFACE,
"surface no longer exists");
goto err;
}
if (!linux_sync_file_is_valid(fd)) {
wl_resource_post_error(
resource,
ZWP_LINUX_SURFACE_SYNCHRONIZATION_V1_ERROR_INVALID_FENCE,
"invalid fence fd");
goto err;
}
if (surface->pending.acquire_fence_fd != -1) {
wl_resource_post_error(
resource,
ZWP_LINUX_SURFACE_SYNCHRONIZATION_V1_ERROR_DUPLICATE_FENCE,
"already have a fence fd");
goto err;
}
fd_update(&surface->pending.acquire_fence_fd, fd);
return;
err:
close(fd);
}
static void
......@@ -162,3 +198,35 @@ linux_explicit_synchronization_setup(struct weston_compositor *compositor)
return 0;
}
/** Resolve an internal compositor error by disconnecting the client.
*
* This function is used in cases when explicit synchronization
* turns out to be unusable and there is no fallback path.
*
* It is possible the fault is caused by a compositor bug, the underlying
* graphics stack bug or normal behaviour, or perhaps a client mistake.
* In any case, the options are to either composite garbage or nothing,
* or disconnect the client. This is a helper function for the latter.
*
* The error is sent as an INVALID_OBJECT error on the client's wl_display.
*
* \param sync The explicit synchronization related resource that is unusable.
* \param msg A custom error message attached to the protocol error.
*/
WL_EXPORT void
linux_explicit_synchronization_send_server_error(struct wl_resource *resource,
const char *msg)
{
uint32_t id = wl_resource_get_id(resource);
const char *class = wl_resource_get_class(resource);
struct wl_client *client = wl_resource_get_client(resource);
struct wl_resource *display_resource = wl_client_get_object(client, 1);
assert(display_resource);
wl_resource_post_error(display_resource,
WL_DISPLAY_ERROR_INVALID_OBJECT,
"linux_explicit_synchronization server error "
"with %s@%"PRIu32": %s",
class, id, msg);
}
......@@ -27,8 +27,13 @@
#define WESTON_LINUX_EXPLICIT_SYNCHRONIZATION_H
struct weston_compositor;
struct wl_resource;
int
linux_explicit_synchronization_setup(struct weston_compositor *compositor);
void
linux_explicit_synchronization_send_server_error(struct wl_resource *resource,
const char *msg);
#endif /* WESTON_LINUX_EXPLICIT_SYNCHRONIZATION */
......@@ -17,6 +17,7 @@ srcs_libweston = [
'input.c',
'linux-dmabuf.c',
'linux-explicit-synchronization.c',
'linux-sync-file.c',
'log.c',
'noop-renderer.c',
'pixel-formats.c',
......
/*
* Copyright © 2018 Collabora, Ltd.
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial
* portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef FD_UTIL_H
#define FD_UTIL_H
#include <unistd.h>
static inline void
fd_update(int *fd, int new_fd)
{
if (*fd == new_fd)
return;
if (*fd >= 0)
close(*fd);
*fd = new_fd;
}
static inline void
fd_move(int *dest, int *src)
{
if (dest == src)
return;
fd_update(dest, *src);
*src = -1;
}
static inline void
fd_clear(int *fd)
{
fd_update(fd, -1);
}
#endif /* FD_UTIL_H */
......@@ -26,6 +26,7 @@
#include "config.h"
#include <string.h>
#include <unistd.h>
#include "linux-explicit-synchronization-unstable-v1-client-protocol.h"
#include "weston-test-client-helper.h"
......@@ -94,3 +95,54 @@ TEST(second_surface_synchronization_on_surface_raises_error)
zwp_linux_surface_synchronization_v1_destroy(surface_sync1);
zwp_linux_explicit_synchronization_v1_destroy(sync);
}
TEST(set_acquire_fence_with_invalid_fence_raises_error)
{
struct client *client = create_test_client();
struct zwp_linux_explicit_synchronization_v1 *sync =
get_linux_explicit_synchronization(client);
struct zwp_linux_surface_synchronization_v1 *surface_sync =
zwp_linux_explicit_synchronization_v1_get_synchronization(
sync, client->surface->wl_surface);
int pipefd[2] = { -1, -1 };
assert(pipe(pipefd) == 0);
zwp_linux_surface_synchronization_v1_set_acquire_fence(surface_sync,
pipefd[0]);
expect_protocol_error(
client,
&zwp_linux_surface_synchronization_v1_interface,
ZWP_LINUX_SURFACE_SYNCHRONIZATION_V1_ERROR_INVALID_FENCE);
close(pipefd[0]);
close(pipefd[1]);
zwp_linux_surface_synchronization_v1_destroy(surface_sync);
zwp_linux_explicit_synchronization_v1_destroy(sync);
}
TEST(set_acquire_fence_on_destroyed_surface_raises_error)
{
struct client *client = create_test_client();
struct zwp_linux_explicit_synchronization_v1 *sync =
get_linux_explicit_synchronization(client);
struct zwp_linux_surface_synchronization_v1 *surface_sync =
zwp_linux_explicit_synchronization_v1_get_synchronization(
sync, client->surface->wl_surface);
int pipefd[2] = { -1, -1 };
assert(pipe(pipefd) == 0);
wl_surface_destroy(client->surface->wl_surface);
zwp_linux_surface_synchronization_v1_set_acquire_fence(surface_sync,
pipefd[0]);
expect_protocol_error(
client,
&zwp_linux_surface_synchronization_v1_interface,
ZWP_LINUX_SURFACE_SYNCHRONIZATION_V1_ERROR_NO_SURFACE);
close(pipefd[0]);
close(pipefd[1]);
zwp_linux_surface_synchronization_v1_destroy(surface_sync);
zwp_linux_explicit_synchronization_v1_destroy(sync);
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment