Commit 59a2e613 authored by Viresh Kumar's avatar Viresh Kumar Committed by Rafael J. Wysocki

cpufreq: sa11x0: move cpufreq driver to drivers/cpufreq

This patch moves cpufreq driver of ARM based sa11x0 platform to drivers/cpufreq.
Signed-off-by: default avatarViresh Kumar <viresh.kumar@linaro.org>
Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
parent b7e614c8
......@@ -2150,7 +2150,6 @@ endmenu
menu "CPU Power Management"
if ARCH_HAS_CPUFREQ
source "drivers/cpufreq/Kconfig"
config CPU_FREQ_IMX
......@@ -2160,12 +2159,6 @@ config CPU_FREQ_IMX
help
This enables the CPUfreq driver for i.MX CPUs.
config CPU_FREQ_SA1100
bool
config CPU_FREQ_SA1110
bool
config CPU_FREQ_S3C
bool
help
......
......@@ -4,7 +4,7 @@ menu "SA11x0 Implementations"
config SA1100_ASSABET
bool "Assabet"
select CPU_FREQ_SA1110
select ARM_SA1110_CPUFREQ
help
Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
Microprocessor Development Board (also known as the Assabet).
......@@ -20,7 +20,7 @@ config ASSABET_NEPONSET
config SA1100_CERF
bool "CerfBoard"
select CPU_FREQ_SA1110
select ARM_SA1110_CPUFREQ
help
The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
More information is available at:
......@@ -47,7 +47,7 @@ endchoice
config SA1100_COLLIE
bool "Sharp Zaurus SL5500"
# FIXME: select CPU_FREQ_SA11x0
# FIXME: select ARM_SA11x0_CPUFREQ
select SHARP_LOCOMO
select SHARP_PARAM
select SHARP_SCOOP
......@@ -56,7 +56,7 @@ config SA1100_COLLIE
config SA1100_H3100
bool "Compaq iPAQ H3100"
select CPU_FREQ_SA1110
select ARM_SA1110_CPUFREQ
select HTC_EGPIO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
......@@ -67,7 +67,7 @@ config SA1100_H3100
config SA1100_H3600
bool "Compaq iPAQ H3600/H3700"
select CPU_FREQ_SA1110
select ARM_SA1110_CPUFREQ
select HTC_EGPIO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
......@@ -78,7 +78,7 @@ config SA1100_H3600
config SA1100_BADGE4
bool "HP Labs BadgePAD 4"
select CPU_FREQ_SA1100
select ARM_SA1100_CPUFREQ
select SA1111
help
Say Y here if you want to build a kernel for the HP Laboratories
......@@ -86,7 +86,7 @@ config SA1100_BADGE4
config SA1100_JORNADA720
bool "HP Jornada 720"
# FIXME: select CPU_FREQ_SA11x0
# FIXME: select ARM_SA11x0_CPUFREQ
select SA1111
help
Say Y here if you want to build a kernel for the HP Jornada 720
......@@ -105,14 +105,14 @@ config SA1100_JORNADA720_SSP
config SA1100_HACKKIT
bool "HackKit Core CPU Board"
select CPU_FREQ_SA1100
select ARM_SA1100_CPUFREQ
help
Say Y here to support the HackKit Core CPU Board
<http://hackkit.eletztrick.de>;
config SA1100_LART
bool "LART"
select CPU_FREQ_SA1100
select ARM_SA1100_CPUFREQ
help
Say Y here if you are using the Linux Advanced Radio Terminal
(also known as the LART). See <http://www.lartmaker.nl/> for
......@@ -120,7 +120,7 @@ config SA1100_LART
config SA1100_NANOENGINE
bool "nanoEngine"
select CPU_FREQ_SA1110
select ARM_SA1110_CPUFREQ
select PCI
select PCI_NANOENGINE
help
......@@ -130,7 +130,7 @@ config SA1100_NANOENGINE
config SA1100_PLEB
bool "PLEB"
select CPU_FREQ_SA1100
select ARM_SA1100_CPUFREQ
help
Say Y here if you are using version 1 of the Portable Linux
Embedded Board (also known as PLEB).
......@@ -139,7 +139,7 @@ config SA1100_PLEB
config SA1100_SHANNON
bool "Shannon"
select CPU_FREQ_SA1100
select ARM_SA1100_CPUFREQ
help
The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
limited edition webphone produced by Philips. The Shannon is a SA1100
......@@ -148,7 +148,7 @@ config SA1100_SHANNON
config SA1100_SIMPAD
bool "Simpad"
select CPU_FREQ_SA1110
select ARM_SA1110_CPUFREQ
help
The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
......
......@@ -8,9 +8,6 @@ obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_CPU_FREQ_SA1100) += cpu-sa1100.o
obj-$(CONFIG_CPU_FREQ_SA1110) += cpu-sa1110.o
# Specific board support
obj-$(CONFIG_SA1100_ASSABET) += assabet.o
obj-$(CONFIG_ASSABET_NEPONSET) += neponset.o
......
......@@ -127,6 +127,12 @@ config ARM_S5PV210_CPUFREQ
If in doubt, say N.
config ARM_SA1100_CPUFREQ
bool
config ARM_SA1110_CPUFREQ
bool
config ARM_SPEAR_CPUFREQ
bool "SPEAr CPUFreq support"
depends on PLAT_SPEAR
......
......@@ -66,6 +66,8 @@ obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o
obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o
obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o
obj-$(CONFIG_ARCH_TEGRA) += tegra-cpufreq.o
......
......@@ -91,10 +91,9 @@
#include <asm/cputype.h>
#include <mach/generic.h>
#include <mach/hardware.h>
#include "generic.h"
struct sa1100_dram_regs {
int speed;
u32 mdcnfg;
......
......@@ -27,10 +27,9 @@
#include <asm/cputype.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
#include <mach/hardware.h>
#include "generic.h"
#undef DEBUG
struct sdram_params {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment