Commit 0f8469a5 authored by Russell King's avatar Russell King Committed by Russell King

[ARM] Eliminate useless includes of asm/mach-types.h

There are 43 includes of asm/mach-types.h by files that don't
reference anything from that file.  Remove these unnecessary
includes.
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 897d8527
......@@ -6,7 +6,6 @@
*/
#include <linux/linkage.h>
#include <asm/mach-types.h>
.section ".start", "ax"
......
......@@ -27,7 +27,6 @@
#include <linux/suspend.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/arch/pm.h>
#include <asm/arch/pxa-regs.h>
......
......@@ -15,7 +15,6 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/mach-types.h>
#include <asm/ptrace.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
......
......@@ -24,7 +24,6 @@
#include <linux/clk.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/arch/at91_pmc.h>
......
......@@ -27,7 +27,6 @@
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
......
......@@ -13,7 +13,6 @@
#include <linux/module.h>
#include <linux/init.h>
#include <asm/mach-types.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
......
......@@ -23,7 +23,6 @@
#include <asm/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/gpio.h>
......
......@@ -24,7 +24,6 @@
#include <asm/mach/irq.h>
#include <asm/irq.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/arch/irqs.h>
#include <asm/arch/msi.h>
......
......@@ -26,7 +26,6 @@
#include <asm/memory.h>
#include <asm/hardware.h>
#include <asm/hardware/iop3xx.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#define IOP33X_UART_XTAL 33334000
......
......@@ -33,7 +33,6 @@
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
......
......@@ -31,7 +31,6 @@
#include <asm/sizes.h>
#include <asm/system.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
extern int (*external_fault) (unsigned long, struct pt_regs *);
......
......@@ -12,7 +12,6 @@
#include <linux/module.h>
#include <linux/init.h>
#include <asm/mach-types.h>
#include <asm/leds.h>
#include <asm/arch/devices.h>
#include <asm/arch/gpio.h>
......
......@@ -25,7 +25,6 @@
#include <asm/arch/clock.h>
#include <asm/arch/common.h>
#include <asm/div64.h>
#include <asm/mach-types.h>
#include "crm_regs.h"
......
......@@ -18,7 +18,6 @@
#include <linux/platform_device.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
/*
......
......@@ -12,7 +12,6 @@
#include <linux/kernel_stat.h>
#include <asm/io.h>
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
#include <asm/arch/regs-sys-common.h>
#include <asm/arch/irqs.h>
#include <asm/arch/board.h>
......
......@@ -16,7 +16,6 @@
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/arch/tc.h>
......
......@@ -47,7 +47,6 @@
#include <asm/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
#include <asm/arch/cpu.h>
#include <asm/arch/irqs.h>
......
......@@ -30,7 +30,6 @@
#include <asm/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
#include <asm/arch/irqs.h>
#include <asm/arch/clock.h>
......
......@@ -26,7 +26,6 @@
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/system.h>
......
......@@ -20,7 +20,6 @@
#include <linux/clk.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/cacheflush.h>
#include <asm/arch/pm.h>
#include <asm/arch/clock.h>
......
......@@ -24,7 +24,6 @@
#include <linux/platform_device.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/hardware/scoop.h>
#include <asm/dma.h>
......
......@@ -27,7 +27,6 @@
#include <asm/memory.h>
#include <asm/hardware.h>
#include <asm/hardware/iop3xx.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#ifdef CONFIG_ARCH_IOP32X
......
......@@ -24,7 +24,6 @@
#include <asm/hardware.h>
#include <asm/mach/pci.h>
#include <asm/hardware/iop3xx.h>
#include <asm/mach-types.h>
// #define DEBUG
......
......@@ -30,7 +30,6 @@
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/arch/board.h>
......
......@@ -26,7 +26,6 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
#include <asm/arch/mux.h>
#define OMAP_I2C_SIZE 0x3f
......
......@@ -37,7 +37,6 @@
#include <linux/io.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/arch/i2c.h>
......
......@@ -41,7 +41,6 @@
#include <linux/rtc.h>
#include <linux/bcd.h>
#include <asm/mach-types.h>
#include <asm/mach/irq.h>
#include <asm/arch/gpio.h>
......
......@@ -11,7 +11,6 @@
#include <linux/init.h>
#include <linux/ide.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#define DRV_NAME "ide_arm"
......
......@@ -40,7 +40,6 @@
#include <asm/irq.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/arch/mux.h>
#undef NEW_BOARD_LEARNING_MODE
......
......@@ -26,7 +26,6 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......
......@@ -15,7 +15,6 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/arch/corgi.h>
#include <asm/arch/hardware.h>
#include <asm/arch/pxa-regs.h>
......
......@@ -29,7 +29,6 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/arch/board.h>
#include <asm/arch/mmc.h>
......
......@@ -16,7 +16,6 @@
#include <linux/init.h>
#include <linux/moduleparam.h>
#include <asm/hardware/uengine.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include "ixp2400_rx.ucode"
#include "ixp2400_tx.ucode"
......
......@@ -44,7 +44,6 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
#include <asm/arch/board.h>
......
......@@ -57,7 +57,6 @@
#include <asm/plat-s3c24xx/regs-udc.h>
#include <asm/plat-s3c24xx/udc.h>
#include <asm/mach-types.h>
#include "s3c2410_udc.h"
......
......@@ -15,7 +15,6 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/gpio.h>
......
......@@ -28,7 +28,6 @@
#include <linux/signal.h>
#include <linux/platform_device.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
static struct clk *usb_host_clock;
......
......@@ -23,7 +23,6 @@
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/arch/platform.h>
#include <asm/arch/irqs.h>
......
......@@ -24,7 +24,6 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-regs.h> /* FIXME: for PSSR */
......
......@@ -28,7 +28,6 @@
#include <linux/mm.h>
#include <linux/uaccess.h>
#include <asm/mach-types.h>
#include <asm/arch/dma.h>
#include <asm/arch/omapfb.h>
......
......@@ -28,7 +28,6 @@
* to an address that the kernel can use.
*/
#ifndef __ASSEMBLY__
#include <asm/mach-types.h>
#define __virt_to_bus(v) \
({ unsigned int ret; \
......
......@@ -19,7 +19,6 @@
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
#include <asm/dma.h>
#include <asm/arch/hardware.h>
......
......@@ -24,7 +24,6 @@
#include <sound/soc-dapm.h>
#include <sound/tlv.h>
#include <asm/mach-types.h>
#include <asm/hardware/scoop.h>
#include <asm/arch/regs-clock.h>
#include <asm/arch/regs-gpio.h>
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment