Commit 281d1bbd authored by Dave Airlie's avatar Dave Airlie

Merge remote-tracking branch 'origin/master' into drm-next

Backmerge Linus tree after rc5 + drm-fixes went in.

There were a few amdkfd conflicts I wanted to avoid,
and Ben requested this for nouveau also.

Conflicts:
	drivers/gpu/drm/amd/amdkfd/Makefile
	drivers/gpu/drm/amd/amdkfd/kfd_chardev.c
	drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.c
	drivers/gpu/drm/amd/amdkfd/kfd_priv.h
	drivers/gpu/drm/amd/include/kgd_kfd_interface.h
	drivers/gpu/drm/i915/intel_runtime_pm.c
	drivers/gpu/drm/radeon/radeon_kfd.c
parents bfa55bd4 b942c653
......@@ -51,6 +51,7 @@ Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman <greg@kroah.com>
Henk Vergonet <Henk.Vergonet@gmail.com>
Henrik Kretzschmar <henne@nachtwindheim.de>
Henrik Rydberg <rydberg@bitmath.org>
Herbert Xu <herbert@gondor.apana.org.au>
Jacob Shin <Jacob.Shin@amd.com>
James Bottomley <jejb@mulgrave.(none)>
......
......@@ -14,3 +14,18 @@ Description:
The /sys/class/mei/meiN directory is created for
each probed mei device
What: /sys/class/mei/meiN/fw_status
Date: Nov 2014
KernelVersion: 3.19
Contact: Tomas Winkler <tomas.winkler@intel.com>
Description: Display fw status registers content
The ME FW writes its status information into fw status
registers for BIOS and OS to monitor fw health.
The register contains running state, power management
state, error codes, and others. The way the registers
are decoded depends on PCH or SoC generation.
Also number of registers varies between 1 and 6
depending on generation.
......@@ -4,7 +4,8 @@ This file provides information, what the device node
for the davinci_emac interface contains.
Required properties:
- compatible: "ti,davinci-dm6467-emac" or "ti,am3517-emac"
- compatible: "ti,davinci-dm6467-emac", "ti,am3517-emac" or
"ti,dm816-emac"
- reg: Offset and length of the register set for the device
- ti,davinci-ctrl-reg-offset: offset to control register
- ti,davinci-ctrl-mod-reg-offset: offset to control module register
......
......@@ -1277,6 +1277,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
i8042.notimeout [HW] Ignore timeout condition signalled by controller
i8042.reset [HW] Reset the controller during init and cleanup
i8042.unlock [HW] Unlock (ignore) the keylock
i8042.kbdreset [HW] Reset device connected to KBD port
i810= [HW,DRM]
......
......@@ -66,6 +66,8 @@ fwmark_reflect - BOOLEAN
route/max_size - INTEGER
Maximum number of routes allowed in the kernel. Increase
this when using large numbers of interfaces and/or routes.
From linux kernel 3.6 onwards, this is deprecated for ipv4
as route cache is no longer used.
neigh/default/gc_thresh1 - INTEGER
Minimum number of entries to keep. Garbage collector will not
......
......@@ -389,9 +389,6 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += " .release_cmd = " + fabric_mod_name + "_release_cmd,\n"
buf += " .shutdown_session = " + fabric_mod_name + "_shutdown_session,\n"
buf += " .close_session = " + fabric_mod_name + "_close_session,\n"
buf += " .stop_session = " + fabric_mod_name + "_stop_session,\n"
buf += " .fall_back_to_erl0 = " + fabric_mod_name + "_reset_nexus,\n"
buf += " .sess_logged_in = " + fabric_mod_name + "_sess_logged_in,\n"
buf += " .sess_get_index = " + fabric_mod_name + "_sess_get_index,\n"
buf += " .sess_get_initiator_sid = NULL,\n"
buf += " .write_pending = " + fabric_mod_name + "_write_pending,\n"
......@@ -402,7 +399,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += " .queue_data_in = " + fabric_mod_name + "_queue_data_in,\n"
buf += " .queue_status = " + fabric_mod_name + "_queue_status,\n"
buf += " .queue_tm_rsp = " + fabric_mod_name + "_queue_tm_rsp,\n"
buf += " .is_state_remove = " + fabric_mod_name + "_is_state_remove,\n"
buf += " .aborted_task = " + fabric_mod_name + "_aborted_task,\n"
buf += " /*\n"
buf += " * Setup function pointers for generic logic in target_core_fabric_configfs.c\n"
buf += " */\n"
......@@ -428,7 +425,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += " /*\n"
buf += " * Register the top level struct config_item_type with TCM core\n"
buf += " */\n"
buf += " fabric = target_fabric_configfs_init(THIS_MODULE, \"" + fabric_mod_name[4:] + "\");\n"
buf += " fabric = target_fabric_configfs_init(THIS_MODULE, \"" + fabric_mod_name + "\");\n"
buf += " if (IS_ERR(fabric)) {\n"
buf += " printk(KERN_ERR \"target_fabric_configfs_init() failed\\n\");\n"
buf += " return PTR_ERR(fabric);\n"
......@@ -595,7 +592,7 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
if re.search('get_fabric_name', fo):
buf += "char *" + fabric_mod_name + "_get_fabric_name(void)\n"
buf += "{\n"
buf += " return \"" + fabric_mod_name[4:] + "\";\n"
buf += " return \"" + fabric_mod_name + "\";\n"
buf += "}\n\n"
bufi += "char *" + fabric_mod_name + "_get_fabric_name(void);\n"
continue
......@@ -820,27 +817,6 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += "}\n\n"
bufi += "void " + fabric_mod_name + "_close_session(struct se_session *);\n"
if re.search('stop_session\)\(', fo):
buf += "void " + fabric_mod_name + "_stop_session(struct se_session *se_sess, int sess_sleep , int conn_sleep)\n"
buf += "{\n"
buf += " return;\n"
buf += "}\n\n"
bufi += "void " + fabric_mod_name + "_stop_session(struct se_session *, int, int);\n"
if re.search('fall_back_to_erl0\)\(', fo):
buf += "void " + fabric_mod_name + "_reset_nexus(struct se_session *se_sess)\n"
buf += "{\n"
buf += " return;\n"
buf += "}\n\n"
bufi += "void " + fabric_mod_name + "_reset_nexus(struct se_session *);\n"
if re.search('sess_logged_in\)\(', fo):
buf += "int " + fabric_mod_name + "_sess_logged_in(struct se_session *se_sess)\n"
buf += "{\n"
buf += " return 0;\n"
buf += "}\n\n"
bufi += "int " + fabric_mod_name + "_sess_logged_in(struct se_session *);\n"
if re.search('sess_get_index\)\(', fo):
buf += "u32 " + fabric_mod_name + "_sess_get_index(struct se_session *se_sess)\n"
buf += "{\n"
......@@ -898,19 +874,18 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
bufi += "int " + fabric_mod_name + "_queue_status(struct se_cmd *);\n"
if re.search('queue_tm_rsp\)\(', fo):
buf += "int " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *se_cmd)\n"
buf += "void " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *se_cmd)\n"
buf += "{\n"
buf += " return 0;\n"
buf += " return;\n"
buf += "}\n\n"
bufi += "int " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *);\n"
bufi += "void " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *);\n"
if re.search('is_state_remove\)\(', fo):
buf += "int " + fabric_mod_name + "_is_state_remove(struct se_cmd *se_cmd)\n"
if re.search('aborted_task\)\(', fo):
buf += "void " + fabric_mod_name + "_aborted_task(struct se_cmd *se_cmd)\n"
buf += "{\n"
buf += " return 0;\n"
buf += " return;\n"
buf += "}\n\n"
bufi += "int " + fabric_mod_name + "_is_state_remove(struct se_cmd *);\n"
bufi += "void " + fabric_mod_name + "_aborted_task(struct se_cmd *);\n"
ret = p.write(buf)
if ret:
......@@ -1018,11 +993,11 @@ def main(modname, proto_ident):
tcm_mod_build_kbuild(fabric_mod_dir, fabric_mod_name)
tcm_mod_build_kconfig(fabric_mod_dir, fabric_mod_name)
input = raw_input("Would you like to add " + fabric_mod_name + "to drivers/target/Makefile..? [yes,no]: ")
input = raw_input("Would you like to add " + fabric_mod_name + " to drivers/target/Makefile..? [yes,no]: ")
if input == "yes" or input == "y":
tcm_mod_add_kbuild(tcm_dir, fabric_mod_name)
input = raw_input("Would you like to add " + fabric_mod_name + "to drivers/target/Kconfig..? [yes,no]: ")
input = raw_input("Would you like to add " + fabric_mod_name + " to drivers/target/Kconfig..? [yes,no]: ")
if input == "yes" or input == "y":
tcm_mod_add_kconfig(tcm_dir, fabric_mod_name)
......
......@@ -3,7 +3,7 @@ CPU cooling APIs How To
Written by Amit Daniel Kachhap <amit.kachhap@linaro.org>
Updated: 12 May 2012
Updated: 6 Jan 2015
Copyright (c) 2012 Samsung Electronics Co., Ltd(http://www.samsung.com)
......@@ -25,7 +25,18 @@ the user. The registration APIs returns the cooling device pointer.
clip_cpus: cpumask of cpus where the frequency constraints will happen.
1.1.2 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
1.1.2 struct thermal_cooling_device *of_cpufreq_cooling_register(
struct device_node *np, const struct cpumask *clip_cpus)
This interface function registers the cpufreq cooling device with
the name "thermal-cpufreq-%x" linking it with a device tree node, in
order to bind it via the thermal DT code. This api can support multiple
instances of cpufreq cooling devices.
np: pointer to the cooling device device tree node
clip_cpus: cpumask of cpus where the frequency constraints will happen.
1.1.3 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
This interface function unregisters the "thermal-cpufreq-%x" cooling device.
......
......@@ -726,15 +726,15 @@ F: include/uapi/linux/apm_bios.h
F: drivers/char/apm-emulation.c
APPLE BCM5974 MULTITOUCH DRIVER
M: Henrik Rydberg <rydberg@euromail.se>
M: Henrik Rydberg <rydberg@bitmath.org>
L: linux-input@vger.kernel.org
S: Maintained
S: Odd fixes
F: drivers/input/mouse/bcm5974.c
APPLE SMC DRIVER
M: Henrik Rydberg <rydberg@euromail.se>
M: Henrik Rydberg <rydberg@bitmath.org>
L: lm-sensors@lm-sensors.org
S: Maintained
S: Odd fixes
F: drivers/hwmon/applesmc.c
APPLETALK NETWORK LAYER
......@@ -756,13 +756,6 @@ L: linux-media@vger.kernel.org
S: Maintained
F: drivers/media/i2c/aptina-pll.*
ARASAN COMPACT FLASH PATA CONTROLLER
M: Viresh Kumar <viresh.linux@gmail.com>
L: linux-ide@vger.kernel.org
S: Maintained
F: include/linux/pata_arasan_cf_data.h
F: drivers/ata/pata_arasan_cf.c
ARC FRAMEBUFFER DRIVER
M: Jaya Kumar <jayalk@intworks.biz>
S: Maintained
......@@ -2261,6 +2254,7 @@ F: drivers/gpio/gpio-bt8xx.c
BTRFS FILE SYSTEM
M: Chris Mason <clm@fb.com>
M: Josef Bacik <jbacik@fb.com>
M: David Sterba <dsterba@suse.cz>
L: linux-btrfs@vger.kernel.org
W: http://btrfs.wiki.kernel.org/
Q: http://patchwork.kernel.org/project/linux-btrfs/list/
......@@ -2347,7 +2341,8 @@ CAN NETWORK LAYER
M: Oliver Hartkopp <socketcan@hartkopp.net>
L: linux-can@vger.kernel.org
W: http://gitorious.org/linux-can
T: git git://gitorious.org/linux-can/linux-can-next.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
S: Maintained
F: Documentation/networking/can.txt
F: net/can/
......@@ -2362,7 +2357,8 @@ M: Wolfgang Grandegger <wg@grandegger.com>
M: Marc Kleine-Budde <mkl@pengutronix.de>
L: linux-can@vger.kernel.org
W: http://gitorious.org/linux-can
T: git git://gitorious.org/linux-can/linux-can-next.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
S: Maintained
F: drivers/net/can/
F: include/linux/can/dev.h
......@@ -3184,7 +3180,7 @@ L: dmaengine@vger.kernel.org
Q: https://patchwork.kernel.org/project/linux-dmaengine/list/
S: Maintained
F: drivers/dma/
F: include/linux/dma*
F: include/linux/dmaengine.h
F: Documentation/dmaengine/
T: git git://git.infradead.org/users/vkoul/slave-dma.git
......@@ -4750,7 +4746,7 @@ S: Supported
F: drivers/scsi/ipr.*
IBM Power Virtual Ethernet Device Driver
M: Santiago Leon <santil@linux.vnet.ibm.com>
M: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/ibm/ibmveth.*
......@@ -4931,7 +4927,6 @@ F: include/uapi/linux/inotify.h
INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN) DRIVERS
M: Dmitry Torokhov <dmitry.torokhov@gmail.com>
M: Dmitry Torokhov <dtor@mail.ru>
L: linux-input@vger.kernel.org
Q: http://patchwork.kernel.org/project/linux-input/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
......@@ -4942,10 +4937,10 @@ F: include/uapi/linux/input.h
F: include/linux/input/
INPUT MULTITOUCH (MT) PROTOCOL
M: Henrik Rydberg <rydberg@euromail.se>
M: Henrik Rydberg <rydberg@bitmath.org>
L: linux-input@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/rydberg/input-mt.git
S: Maintained
S: Odd fixes
F: Documentation/input/multi-touch-protocol.txt
F: drivers/input/input-mt.c
K: \b(ABS|SYN)_MT_
......@@ -5281,6 +5276,15 @@ W: www.open-iscsi.org
Q: http://patchwork.kernel.org/project/linux-rdma/list/
F: drivers/infiniband/ulp/iser/
ISCSI EXTENSIONS FOR RDMA (ISER) TARGET
M: Sagi Grimberg <sagig@mellanox.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git master
L: linux-rdma@vger.kernel.org
L: target-devel@vger.kernel.org
S: Supported
W: http://www.linux-iscsi.org
F: drivers/infiniband/ulp/isert
ISDN SUBSYSTEM
M: Karsten Keil <isdn@linux-pingi.de>
L: isdn4linux@listserv.isdn4linux.de (subscribers-only)
......@@ -5695,6 +5699,49 @@ F: drivers/lguest/
F: include/linux/lguest*.h
F: tools/lguest/
LIBATA SUBSYSTEM (Serial and Parallel ATA drivers)
M: Tejun Heo <tj@kernel.org>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
S: Maintained
F: drivers/ata/
F: include/linux/ata.h
F: include/linux/libata.h
LIBATA PATA ARASAN COMPACT FLASH CONTROLLER
M: Viresh Kumar <viresh.linux@gmail.com>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
S: Maintained
F: include/linux/pata_arasan_cf_data.h
F: drivers/ata/pata_arasan_cf.c
LIBATA PATA DRIVERS
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
M: Tejun Heo <tj@kernel.org>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
S: Maintained
F: drivers/ata/pata_*.c
F: drivers/ata/ata_generic.c
LIBATA SATA AHCI PLATFORM devices support
M: Hans de Goede <hdegoede@redhat.com>
M: Tejun Heo <tj@kernel.org>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
S: Maintained
F: drivers/ata/ahci_platform.c
F: drivers/ata/libahci_platform.c
F: include/linux/ahci_platform.h
LIBATA SATA PROMISE TX2/TX4 CONTROLLER DRIVER
M: Mikael Pettersson <mikpelinux@gmail.com>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
S: Maintained
F: drivers/ata/sata_promise.*
LIBLOCKDEP
M: Sasha Levin <sasha.levin@oracle.com>
S: Maintained
......@@ -7401,6 +7448,7 @@ F: drivers/crypto/picoxcell*
PIN CONTROL SUBSYSTEM
M: Linus Walleij <linus.walleij@linaro.org>
L: linux-gpio@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git
S: Maintained
F: drivers/pinctrl/
F: include/linux/pinctrl/
......@@ -7568,12 +7616,6 @@ W: http://wireless.kernel.org/en/users/Drivers/p54
S: Obsolete
F: drivers/net/wireless/prism54/
PROMISE SATA TX2/TX4 CONTROLLER LIBATA DRIVER
M: Mikael Pettersson <mikpelinux@gmail.com>
L: linux-ide@vger.kernel.org
S: Maintained
F: drivers/ata/sata_promise.*
PS3 NETWORK SUPPORT
M: Geoff Levand <geoff@infradead.org>
L: netdev@vger.kernel.org
......@@ -7739,8 +7781,7 @@ F: Documentation/scsi/LICENSE.qla2xxx
F: drivers/scsi/qla2xxx/
QLOGIC QLA4XXX iSCSI DRIVER
M: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
M: iscsi-driver@qlogic.com
M: QLogic-Storage-Upstream@qlogic.com
L: linux-scsi@vger.kernel.org
S: Supported
F: Documentation/scsi/LICENSE.qla4xxx
......@@ -8548,25 +8589,6 @@ S: Maintained
F: drivers/misc/phantom.c
F: include/uapi/linux/phantom.h
SERIAL ATA (SATA) SUBSYSTEM
M: Tejun Heo <tj@kernel.org>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
S: Supported
F: drivers/ata/
F: include/linux/ata.h
F: include/linux/libata.h
SERIAL ATA AHCI PLATFORM devices support
M: Hans de Goede <hdegoede@redhat.com>
M: Tejun Heo <tj@kernel.org>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
S: Supported
F: drivers/ata/ahci_platform.c
F: drivers/ata/libahci_platform.c
F: include/linux/ahci_platform.h
SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
M: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
L: linux-scsi@vger.kernel.org
......@@ -9535,7 +9557,8 @@ F: drivers/platform/x86/thinkpad_acpi.c
TI BANDGAP AND THERMAL DRIVER
M: Eduardo Valentin <edubezval@gmail.com>
L: linux-pm@vger.kernel.org
S: Supported
L: linux-omap@vger.kernel.org
S: Maintained
F: drivers/thermal/ti-soc-thermal/
TI CLOCK DRIVER
......
VERSION = 3
PATCHLEVEL = 19
SUBLEVEL = 0
EXTRAVERSION = -rc3
EXTRAVERSION = -rc5
NAME = Diseased Newt
# *DOCUMENTATION*
......@@ -391,6 +391,7 @@ USERINCLUDE := \
# Needed to be compatible with the O= option
LINUXINCLUDE := \
-I$(srctree)/arch/$(hdr-arch)/include \
-Iarch/$(hdr-arch)/include/generated/uapi \
-Iarch/$(hdr-arch)/include/generated \
$(if $(KBUILD_SRC), -I$(srctree)/include) \
-Iinclude \
......
......@@ -953,6 +953,8 @@
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fb>;
clocks = <&lcd_clk>, <&lcd_clk>;
clock-names = "lcdc_clk", "hclk";
status = "disabled";
};
......
......@@ -65,6 +65,8 @@
};
&sdhci2 {
broken-cd;
bus-width = <8>;
non-removable;
status = "okay";
};
......
......@@ -83,7 +83,8 @@
compatible = "mrvl,pxav3-mmc";
reg = <0xab1000 0x200>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&chip CLKID_SDIO1XIN>;
clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
clock-names = "io", "core";
status = "disabled";
};
......@@ -348,36 +349,6 @@
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
};
gpio4: gpio@5000 {
compatible = "snps,dw-apb-gpio";
reg = <0x5000 0x400>;