Commit 00186bb8 authored by Peter Hutterer's avatar Peter Hutterer
Browse files

doc: device-quirks: redo the model quirks <dl> for sphinx' benefit



sphinx only supports one line of <dt> content, so we have to compress these.
Signed-off-by: Peter Hutterer's avatarPeter Hutterer <peter.hutterer@who-t.net>
parent a154e859
......@@ -119,10 +119,7 @@ for this device not needed for any other device. Only the more
general-purpose <b>Model*</b> flags are listed here.
<dl>
<dt>ModelALPSTouchpad</dt>
<dt>ModelAppleTouchpad</dt>
<dt>ModelWacomTouchpad</dt>
<dt>ModelChromebook</dt>
<dt>ModelALPSTouchpad, ModelAppleTouchpad, ModelWacomTouchpad, ModelChromebook</dt>
<dd>Reserved for touchpads made by the respective vendors</dd>
<dt>ModelTabletNoTilt</dt>
<dd>Indicates that the tablet stylus does not provide tilt axis
......@@ -144,31 +141,26 @@ general-purpose <b>Model*</b> flags are listed here.
<dt>ModelSynapticsSerialTouchpad</dt>
<dd>Reserved for touchpads made by Synaptics on the serial bus</dd>
</dd>
<dt>AttrSizeHint=NxM</dt>
<dt>AttrResolutionHint=N</dt>
<dt>AttrSizeHint=NxM, AttrResolutionHint=N</dt>
<dd>Hints at the width x height of the device in mm, or the resolution
of the x/y axis in units/mm. These may only be used where they apply to
a large proportion of matching devices. They should not be used for any
specific device, override `EVDEV_ABS_*` instead, see @ref
absolute_coordinate_ranges_fix.
</dd>
<dt>AttrTouchSizeRange=N:M</dt>
<dt>AttrPalmSizeThreshold=O</dt>
<dt>AttrTouchSizeRange=N:M, AttrPalmSizeThreshold=O</dt>
<dd>Specifies the touch size required to
trigger a press (N) and to trigger a release (M). O > N > M. See
@ref touchpad_touch_size_hwdb for more details.
</dd>
<dt>AttrTouchPressureRange=N:M</dt>
<dt>AttrPalmPressureThreshold=O</dt>
<dt>AttrThumbPressureThreshold=P</dt>
<dt>AttrTouchPressureRange=N:M, AttrPalmPressureThreshold=O, AttrThumbPressureThreshold=P</dt>
<dd>Specifies the touch pressure required to
trigger a press (N) and to trigger a release (M), when a palm touch is
triggered (O) and when a thumb touch is triggered (P). O > P > N > M. See
@ref touchpad_pressure_hwdb for more details.
</dd>
<dt>AttrLidSwitchReliability=reliable|write_open</dt>
<dd>
Indicates the reliability of the lid switch. This is a string enum. Do not
<dd>Indicates the reliability of the lid switch. This is a string enum. Do not
use "reliable" for any specific device. Very few devices need this, if in
doubt do not set. See @ref switches_lid for details.
</dd>
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment