Commit 46760262 authored by Faidon Liambotis's avatar Faidon Liambotis Committed by Guillem Jover

Update <sys/queue.h> from FreeBSD

This brings <sys/queue.h> to the most up-to-date version from FreeBSD,
incorporating 18 commits from the past 5 years (2015-02-24 - 2021-01-25):

  $ git log --oneline 9090a24aed70..8d55837dc133 sys/sys/queue.h share/man/man3/queue.3

Only minimal changes compared to the FreeBSD version have been applied
(queue.3 -> queue.3bsd, _LIBBSD_ prefix).

[guillem@hadrons.org: Remove reference to kernel mode in man page. ]

Closes: !12Signed-off-by: Guillem Jover's avatarGuillem Jover <guillem@hadrons.org>
parent 25f9b306
/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 1991, 1993
* The Regents of the University of California. All rights reserved.
*
......@@ -10,7 +12,7 @@
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
......@@ -80,17 +82,25 @@
*
* For details on the use of these macros, see the queue(3) manual page.
*
* Below is a summary of implemented functions where:
* + means the macro is available
* - means the macro is not available
* s means the macro is available but is slow (runs in O(n) time)
*
* SLIST LIST STAILQ TAILQ
* _HEAD + + + +
* _CLASS_HEAD + + + +
* _HEAD_INITIALIZER + + + +
* _ENTRY + + + +
* _CLASS_ENTRY + + + +
* _INIT + + + +
* _EMPTY + + + +
* _END + + + +
* _FIRST + + + +
* _NEXT + + + +
* _PREV - + - +
* _LAST - - + +
* _LAST_FAST - - - +
* _FOREACH + + + +
* _FOREACH_FROM + + + +
* _FOREACH_SAFE + + + +
......@@ -103,14 +113,20 @@
* _INSERT_BEFORE - + - +
* _INSERT_AFTER + + + +
* _INSERT_TAIL - - + +
* _CONCAT - - + +
* _CONCAT s s + +
* _REMOVE_AFTER + - + -
* _REMOVE_HEAD + - + -
* _REMOVE + + + +
* _REMOVE s + s +
* _SWAP + + + +
*
*/
#ifdef QUEUE_MACRO_DEBUG
#warn Use QUEUE_MACRO_DEBUG_TRACE and/or QUEUE_MACRO_DEBUG_TRASH
#define QUEUE_MACRO_DEBUG_TRACE
#define QUEUE_MACRO_DEBUG_TRASH
#endif
#ifdef QUEUE_MACRO_DEBUG_TRACE
/* Store the last 2 places the queue element or head was altered */
struct qm_trace {
unsigned long lastline;
......@@ -120,9 +136,7 @@ struct qm_trace {
};
#define TRACEBUF struct qm_trace trace;
#define TRACEBUF_INITIALIZER { __FILE__, __LINE__, NULL, 0 } ,
#define TRASHIT(x) do {(x) = (void *)-1;} while (0)
#define QMD_SAVELINK(name, link) void **name = (void *)&(link)
#define TRACEBUF_INITIALIZER { __LINE__, 0, __FILE__, NULL } ,
#define QMD_TRACE_HEAD(head) do { \
(head)->trace.prevline = (head)->trace.lastline; \
......@@ -138,14 +152,31 @@ struct qm_trace {
(elem)->trace.lastfile = __FILE__; \
} while (0)
#else
#else /* !QUEUE_MACRO_DEBUG_TRACE */
#define QMD_TRACE_ELEM(elem)
#define QMD_TRACE_HEAD(head)
#define QMD_SAVELINK(name, link)
#define TRACEBUF
#define TRACEBUF_INITIALIZER
#endif /* QUEUE_MACRO_DEBUG_TRACE */
#ifdef QUEUE_MACRO_DEBUG_TRASH
#define QMD_SAVELINK(name, link) void **name = (void *)&(link)
#define TRASHIT(x) do {(x) = (void *)-1;} while (0)
#define QMD_IS_TRASHED(x) ((x) == (void *)(intptr_t)-1)
#else /* !QUEUE_MACRO_DEBUG_TRASH */
#define QMD_SAVELINK(name, link)
#define TRASHIT(x)
#endif /* QUEUE_MACRO_DEBUG */
#define QMD_IS_TRASHED(x) 0
#endif /* QUEUE_MACRO_DEBUG_TRASH */
#ifdef __cplusplus
/*
* In C++ there can be structure lists and class lists:
*/
#define QUEUE_TYPEOF(type) type
#else
#define QUEUE_TYPEOF(type) struct type
#endif
/*
* Singly-linked List declarations.
......@@ -155,6 +186,11 @@ struct name { \
struct type *slh_first; /* first element */ \
}
#define SLIST_CLASS_HEAD(name, type) \
struct name { \
class type *slh_first; /* first element */ \
}
#define SLIST_HEAD_INITIALIZER(head) \
{ NULL }
......@@ -163,9 +199,37 @@ struct { \
struct type *sle_next; /* next element */ \
}
#define SLIST_CLASS_ENTRY(type) \
struct { \
class type *sle_next; /* next element */ \
}
/*
* Singly-linked List functions.
*/
#if (defined(_KERNEL) && defined(INVARIANTS))
#define QMD_SLIST_CHECK_PREVPTR(prevp, elm) do { \
if (*(prevp) != (elm)) \
panic("Bad prevptr *(%p) == %p != %p", \
(prevp), *(prevp), (elm)); \
} while (0)
#else
#define QMD_SLIST_CHECK_PREVPTR(prevp, elm)
#endif
#define SLIST_CONCAT(head1, head2, type, field) do { \
QUEUE_TYPEOF(type) *curelm = SLIST_FIRST(head1); \
if (curelm == NULL) { \
if ((SLIST_FIRST(head1) = SLIST_FIRST(head2)) != NULL) \
SLIST_INIT(head2); \
} else if (SLIST_FIRST(head2) != NULL) { \
while (SLIST_NEXT(curelm, field) != NULL) \
curelm = SLIST_NEXT(curelm, field); \
SLIST_NEXT(curelm, field) = SLIST_FIRST(head2); \
SLIST_INIT(head2); \
} \
} while (0)
#define SLIST_EMPTY(head) ((head)->slh_first == NULL)
#define SLIST_FIRST(head) ((head)->slh_first)
......@@ -217,7 +281,7 @@ struct { \
SLIST_REMOVE_HEAD((head), field); \
} \
else { \
struct type *curelm = SLIST_FIRST((head)); \
QUEUE_TYPEOF(type) *curelm = SLIST_FIRST(head); \
while (SLIST_NEXT(curelm, field) != (elm)) \
curelm = SLIST_NEXT(curelm, field); \
SLIST_REMOVE_AFTER(curelm, field); \
......@@ -234,12 +298,20 @@ struct { \
SLIST_FIRST((head)) = SLIST_NEXT(SLIST_FIRST((head)), field); \
} while (0)
#define SLIST_REMOVE_PREVPTR(prevp, elm, field) do { \
QMD_SLIST_CHECK_PREVPTR(prevp, elm); \
*(prevp) = SLIST_NEXT(elm, field); \
TRASHIT((elm)->field.sle_next); \
} while (0)
#define SLIST_SWAP(head1, head2, type) do { \
struct type *swap_first = SLIST_FIRST(head1); \
QUEUE_TYPEOF(type) *swap_first = SLIST_FIRST(head1); \
SLIST_FIRST(head1) = SLIST_FIRST(head2); \
SLIST_FIRST(head2) = swap_first; \
} while (0)
#define SLIST_END(head) NULL
/*
* Singly-linked Tail queue declarations.
*/
......@@ -249,6 +321,12 @@ struct name { \
struct type **stqh_last;/* addr of last next element */ \
}
#define STAILQ_CLASS_HEAD(name, type) \
struct name { \
class type *stqh_first; /* first element */ \
class type **stqh_last; /* addr of last next element */ \
}
#define STAILQ_HEAD_INITIALIZER(head) \
{ NULL, &(head).stqh_first }
......@@ -257,6 +335,11 @@ struct { \
struct type *stqe_next; /* next element */ \
}
#define STAILQ_CLASS_ENTRY(type) \
struct { \
class type *stqe_next; /* next element */ \
}
/*
* Singly-linked Tail queue functions.
*/
......@@ -315,9 +398,10 @@ struct { \
(head)->stqh_last = &STAILQ_NEXT((elm), field); \
} while (0)
#define STAILQ_LAST(head, type, field) \
(STAILQ_EMPTY((head)) ? NULL : \
__containerof((head)->stqh_last, struct type, field.stqe_next))
#define STAILQ_LAST(head, type, field) \
(STAILQ_EMPTY((head)) ? NULL : \
__containerof((head)->stqh_last, \
QUEUE_TYPEOF(type), field.stqe_next))
#define STAILQ_NEXT(elm, field) ((elm)->field.stqe_next)
......@@ -327,7 +411,7 @@ struct { \
STAILQ_REMOVE_HEAD((head), field); \
} \
else { \
struct type *curelm = STAILQ_FIRST((head)); \
QUEUE_TYPEOF(type) *curelm = STAILQ_FIRST(head); \
while (STAILQ_NEXT(curelm, field) != (elm)) \
curelm = STAILQ_NEXT(curelm, field); \
STAILQ_REMOVE_AFTER(head, curelm, field); \
......@@ -348,8 +432,8 @@ struct { \
} while (0)
#define STAILQ_SWAP(head1, head2, type) do { \
struct type *swap_first = STAILQ_FIRST(head1); \
struct type **swap_last = (head1)->stqh_last; \
QUEUE_TYPEOF(type) *swap_first = STAILQ_FIRST(head1); \
QUEUE_TYPEOF(type) **swap_last = (head1)->stqh_last; \
STAILQ_FIRST(head1) = STAILQ_FIRST(head2); \
(head1)->stqh_last = (head2)->stqh_last; \
STAILQ_FIRST(head2) = swap_first; \
......@@ -360,6 +444,8 @@ struct { \
(head2)->stqh_last = &STAILQ_FIRST(head2); \
} while (0)
#define STAILQ_END(head) NULL
/*
* List declarations.
......@@ -369,6 +455,11 @@ struct name { \
struct type *lh_first; /* first element */ \
}
#define LIST_CLASS_HEAD(name, type) \
struct name { \
class type *lh_first; /* first element */ \
}
#define LIST_HEAD_INITIALIZER(head) \
{ NULL }
......@@ -378,11 +469,23 @@ struct { \
struct type **le_prev; /* address of previous next element */ \
}
#define LIST_CLASS_ENTRY(type) \
struct { \
class type *le_next; /* next element */ \
class type **le_prev; /* address of previous next element */ \
}
/*
* List functions.
*/
#if (defined(_KERNEL) && defined(INVARIANTS))
/*
* QMD_LIST_CHECK_HEAD(LIST_HEAD *head, LIST_ENTRY NAME)
*
* If the list is non-empty, validates that the first element of the list
* points back at 'head.'
*/
#define QMD_LIST_CHECK_HEAD(head, field) do { \
if (LIST_FIRST((head)) != NULL && \
LIST_FIRST((head))->field.le_prev != \
......@@ -390,6 +493,12 @@ struct { \
panic("Bad list head %p first->prev != head", (head)); \
} while (0)
/*
* QMD_LIST_CHECK_NEXT(TYPE *elm, LIST_ENTRY NAME)
*
* If an element follows 'elm' in the list, validates that the next element
* points back at 'elm.'
*/
#define QMD_LIST_CHECK_NEXT(elm, field) do { \
if (LIST_NEXT((elm), field) != NULL && \
LIST_NEXT((elm), field)->field.le_prev != \
......@@ -397,6 +506,11 @@ struct { \
panic("Bad link elm %p next->prev != elm", (elm)); \
} while (0)
/*
* QMD_LIST_CHECK_PREV(TYPE *elm, LIST_ENTRY NAME)
*
* Validates that the previous element (or head of the list) points to 'elm.'
*/
#define QMD_LIST_CHECK_PREV(elm, field) do { \
if (*(elm)->field.le_prev != (elm)) \
panic("Bad link elm %p prev->next != elm", (elm)); \
......@@ -407,6 +521,23 @@ struct { \
#define QMD_LIST_CHECK_PREV(elm, field)
#endif /* (_KERNEL && INVARIANTS) */
#define LIST_CONCAT(head1, head2, type, field) do { \
QUEUE_TYPEOF(type) *curelm = LIST_FIRST(head1); \
if (curelm == NULL) { \
if ((LIST_FIRST(head1) = LIST_FIRST(head2)) != NULL) { \
LIST_FIRST(head2)->field.le_prev = \
&LIST_FIRST((head1)); \
LIST_INIT(head2); \
} \
} else if (LIST_FIRST(head2) != NULL) { \
while (LIST_NEXT(curelm, field) != NULL) \
curelm = LIST_NEXT(curelm, field); \
LIST_NEXT(curelm, field) = LIST_FIRST(head2); \
LIST_FIRST(head2)->field.le_prev = &LIST_NEXT(curelm, field); \
LIST_INIT(head2); \
} \
} while (0)
#define LIST_EMPTY(head) ((head)->lh_first == NULL)
#define LIST_FIRST(head) ((head)->lh_first)
......@@ -462,9 +593,10 @@ struct { \
#define LIST_NEXT(elm, field) ((elm)->field.le_next)
#define LIST_PREV(elm, head, type, field) \
((elm)->field.le_prev == &LIST_FIRST((head)) ? NULL : \
__containerof((elm)->field.le_prev, struct type, field.le_next))
#define LIST_PREV(elm, head, type, field) \
((elm)->field.le_prev == &LIST_FIRST((head)) ? NULL : \
__containerof((elm)->field.le_prev, \
QUEUE_TYPEOF(type), field.le_next))
#define LIST_REMOVE(elm, field) do { \
QMD_SAVELINK(oldnext, (elm)->field.le_next); \
......@@ -480,7 +612,7 @@ struct { \
} while (0)
#define LIST_SWAP(head1, head2, type, field) do { \
struct type *swap_tmp = LIST_FIRST((head1)); \
QUEUE_TYPEOF(type) *swap_tmp = LIST_FIRST(head1); \
LIST_FIRST((head1)) = LIST_FIRST((head2)); \
LIST_FIRST((head2)) = swap_tmp; \
if ((swap_tmp = LIST_FIRST((head1))) != NULL) \
......@@ -489,6 +621,8 @@ struct { \
swap_tmp->field.le_prev = &LIST_FIRST((head2)); \
} while (0)
#define LIST_END(head) NULL
/*
* Tail queue declarations.
*/
......@@ -499,6 +633,13 @@ struct name { \
TRACEBUF \
}
#define TAILQ_CLASS_HEAD(name, type) \
struct name { \
class type *tqh_first; /* first element */ \
class type **tqh_last; /* addr of last next element */ \
TRACEBUF \
}
#define TAILQ_HEAD_INITIALIZER(head) \
{ NULL, &(head).tqh_first, TRACEBUF_INITIALIZER }
......@@ -509,10 +650,23 @@ struct { \
TRACEBUF \
}
#define TAILQ_CLASS_ENTRY(type) \
struct { \
class type *tqe_next; /* next element */ \
class type **tqe_prev; /* address of previous next element */ \
TRACEBUF \
}
/*
* Tail queue functions.
*/
#if (defined(_KERNEL) && defined(INVARIANTS))
/*
* QMD_TAILQ_CHECK_HEAD(TAILQ_HEAD *head, TAILQ_ENTRY NAME)
*
* If the tailq is non-empty, validates that the first element of the tailq
* points back at 'head.'
*/
#define QMD_TAILQ_CHECK_HEAD(head, field) do { \
if (!TAILQ_EMPTY(head) && \
TAILQ_FIRST((head))->field.tqe_prev != \
......@@ -520,11 +674,22 @@ struct { \
panic("Bad tailq head %p first->prev != head", (head)); \
} while (0)
/*
* QMD_TAILQ_CHECK_TAIL(TAILQ_HEAD *head, TAILQ_ENTRY NAME)
*
* Validates that the tail of the tailq is a pointer to pointer to NULL.
*/
#define QMD_TAILQ_CHECK_TAIL(head, field) do { \
if (*(head)->tqh_last != NULL) \
panic("Bad tailq NEXT(%p->tqh_last) != NULL", (head)); \
} while (0)
/*
* QMD_TAILQ_CHECK_NEXT(TYPE *elm, TAILQ_ENTRY NAME)
*
* If an element follows 'elm' in the tailq, validates that the next element
* points back at 'elm.'
*/
#define QMD_TAILQ_CHECK_NEXT(elm, field) do { \
if (TAILQ_NEXT((elm), field) != NULL && \
TAILQ_NEXT((elm), field)->field.tqe_prev != \
......@@ -532,6 +697,11 @@ struct { \
panic("Bad link elm %p next->prev != elm", (elm)); \
} while (0)
/*
* QMD_TAILQ_CHECK_PREV(TYPE *elm, TAILQ_ENTRY NAME)
*
* Validates that the previous element (or head of the tailq) points to 'elm.'
*/
#define QMD_TAILQ_CHECK_PREV(elm, field) do { \
if (*(elm)->field.tqe_prev != (elm)) \
panic("Bad link elm %p prev->next != elm", (elm)); \
......@@ -616,7 +786,7 @@ struct { \
TAILQ_NEXT((listelm), field) = (elm); \
(elm)->field.tqe_prev = &TAILQ_NEXT((listelm), field); \
QMD_TRACE_ELEM(&(elm)->field); \
QMD_TRACE_ELEM(&listelm->field); \
QMD_TRACE_ELEM(&(listelm)->field); \
} while (0)
#define TAILQ_INSERT_BEFORE(listelm, elm, field) do { \
......@@ -626,7 +796,7 @@ struct { \
*(listelm)->field.tqe_prev = (elm); \
(listelm)->field.tqe_prev = &TAILQ_NEXT((elm), field); \
QMD_TRACE_ELEM(&(elm)->field); \
QMD_TRACE_ELEM(&listelm->field); \
QMD_TRACE_ELEM(&(listelm)->field); \
} while (0)
#define TAILQ_INSERT_HEAD(head, elm, field) do { \
......@@ -655,11 +825,25 @@ struct { \
#define TAILQ_LAST(head, headname) \
(*(((struct headname *)((head)->tqh_last))->tqh_last))
/*
* The FAST function is fast in that it causes no data access other
* then the access to the head. The standard LAST function above
* will cause a data access of both the element you want and
* the previous element. FAST is very useful for instances when
* you may want to prefetch the last data element.
*/
#define TAILQ_LAST_FAST(head, type, field) \
(TAILQ_EMPTY(head) ? NULL : __containerof((head)->tqh_last, QUEUE_TYPEOF(type), field.tqe_next))
#define TAILQ_NEXT(elm, field) ((elm)->field.tqe_next)
#define TAILQ_PREV(elm, headname, field) \
(*(((struct headname *)((elm)->field.tqe_prev))->tqh_last))
#define TAILQ_PREV_FAST(elm, head, type, field) \
((elm)->field.tqe_prev == &(head)->tqh_first ? NULL : \
__containerof((elm)->field.tqe_prev, QUEUE_TYPEOF(type), field.tqe_next))
#define TAILQ_REMOVE(head, elm, field) do { \
QMD_SAVELINK(oldnext, (elm)->field.tqe_next); \
QMD_SAVELINK(oldprev, (elm)->field.tqe_prev); \
......@@ -679,8 +863,8 @@ struct { \
} while (0)
#define TAILQ_SWAP(head1, head2, type, field) do { \
struct type *swap_first = (head1)->tqh_first; \
struct type **swap_last = (head1)->tqh_last; \
QUEUE_TYPEOF(type) *swap_first = (head1)->tqh_first; \
QUEUE_TYPEOF(type) **swap_last = (head1)->tqh_last; \
(head1)->tqh_first = (head2)->tqh_first; \
(head1)->tqh_last = (head2)->tqh_last; \
(head2)->tqh_first = swap_first; \
......@@ -695,4 +879,6 @@ struct { \
(head2)->tqh_last = &(head2)->tqh_first; \
} while (0)
#define TAILQ_END(head) NULL
#endif /* !LIBBSD_SYS_QUEUE_H */
.so man3/queue.3bsd
.so man3/queue.3bsd
......@@ -14,6 +14,8 @@ md5.3bsd: $(srcdir)/mdX.3bsd
$(AM_V_GEN) sed $(SED_MD5_SUBST) $< > $@
dist_man_MANS = \
LIST_CLASS_ENTRY.3bsd \
LIST_CLASS_HEAD.3bsd \
LIST_EMPTY.3bsd \
LIST_ENTRY.3bsd \
LIST_FIRST.3bsd \
......@@ -54,6 +56,8 @@ dist_man_MANS = \
RB_REMOVE.3bsd \
RB_RIGHT.3bsd \
RB_ROOT.3bsd \
SLIST_CLASS_ENTRY.3bsd \
SLIST_CLASS_HEAD.3bsd \
SLIST_EMPTY.3bsd \
SLIST_ENTRY.3bsd \
SLIST_FIRST.3bsd \
......@@ -70,6 +74,7 @@ dist_man_MANS = \
SLIST_REMOVE.3bsd \
SLIST_REMOVE_AFTER.3bsd \
SLIST_REMOVE_HEAD.3bsd \
SLIST_REMOVE_PREVPTR.3bsd \
SLIST_SWAP.3bsd \
SPLAY_EMPTY.3bsd \
SPLAY_ENTRY.3bsd \
......@@ -88,6 +93,8 @@ dist_man_MANS = \
SPLAY_REMOVE.3bsd \
SPLAY_RIGHT.3bsd \
SPLAY_ROOT.3bsd \
STAILQ_CLASS_ENTRY.3bsd \
STAILQ_CLASS_HEAD.3bsd \
STAILQ_CONCAT.3bsd \
STAILQ_EMPTY.3bsd \
STAILQ_ENTRY.3bsd \
......@@ -108,6 +115,8 @@ dist_man_MANS = \
STAILQ_REMOVE_AFTER.3bsd \
STAILQ_REMOVE_HEAD.3bsd \
STAILQ_SWAP.3bsd \
TAILQ_CLASS_ENTRY.3bsd \
TAILQ_CLASS_HEAD.3bsd \
TAILQ_CONCAT.3bsd \
TAILQ_EMPTY.3bsd \
TAILQ_ENTRY.3bsd \
......
.so man3/queue.3bsd
.so man3/queue.3bsd
.so man3/queue.3bsd
.so man3/queue.3bsd
.so man3/queue.3bsd
......@@ -28,35 +28,40 @@
.\" @(#)queue.3 8.2 (Berkeley) 1/24/94
.\" $FreeBSD$
.\"
.Dd June 17, 2013
.Dd September 8, 2016
.Dt QUEUE 3bsd
.Os
.Sh NAME
.Nm SLIST_CLASS_ENTRY ,
.Nm SLIST_CLASS_HEAD ,
.Nm SLIST_CONCAT ,
.Nm SLIST_EMPTY ,
.Nm SLIST_ENTRY ,
.Nm SLIST_FIRST ,
.Nm SLIST_FOREACH ,
.Nm SLIST_FOREACH_FROM ,
.Nm SLIST_FOREACH_SAFE ,
.Nm SLIST_FOREACH_FROM_SAFE ,
.Nm SLIST_FOREACH_SAFE ,
.Nm SLIST_HEAD ,
.Nm SLIST_HEAD_INITIALIZER ,
.Nm SLIST_INIT ,
.Nm SLIST_INSERT_AFTER ,
.Nm SLIST_INSERT_HEAD ,
.Nm SLIST_NEXT ,
.Nm SLIST_REMOVE ,
.Nm SLIST_REMOVE_AFTER ,
.Nm SLIST_REMOVE_HEAD ,
.Nm SLIST_REMOVE ,
.Nm SLIST_SWAP ,
.Nm STAILQ_CLASS_ENTRY ,
.Nm STAILQ_CLASS_HEAD ,
.Nm STAILQ_CONCAT ,
.Nm STAILQ_EMPTY ,
.Nm STAILQ_ENTRY ,
.Nm STAILQ_FIRST ,
.Nm STAILQ_FOREACH ,
.Nm STAILQ_FOREACH_FROM ,
.Nm STAILQ_FOREACH_SAFE ,
.Nm STAILQ_FOREACH_FROM_SAFE ,
.Nm STAILQ_FOREACH_SAFE ,
.Nm STAILQ_HEAD ,
.Nm STAILQ_HEAD_INITIALIZER ,
.Nm STAILQ_INIT ,
......@@ -65,17 +70,20 @@
.Nm STAILQ_INSERT_TAIL ,
.Nm STAILQ_LAST ,
.Nm STAILQ_NEXT ,
.Nm STAILQ_REMOVE ,
.Nm STAILQ_REMOVE_AFTER ,
.Nm STAILQ_REMOVE_HEAD ,
.Nm STAILQ_REMOVE ,
.Nm STAILQ_SWAP ,
.Nm LIST_CLASS_ENTRY ,
.Nm LIST_CLASS_HEAD ,
.Nm LIST_CONCAT ,
.Nm LIST_EMPTY ,
.Nm LIST_ENTRY ,
.Nm LIST_FIRST ,
.Nm LIST_FOREACH ,
.Nm LIST_FOREACH_FROM ,
.Nm LIST_FOREACH_SAFE ,
.Nm LIST_FOREACH_FROM_SAFE ,
.Nm LIST_FOREACH_SAFE ,
.Nm LIST_HEAD ,
.Nm LIST_HEAD_INITIALIZER ,
.Nm LIST_INIT ,
......@@ -86,18 +94,20 @@
.Nm LIST_PREV ,
.Nm LIST_REMOVE ,
.Nm LIST_SWAP ,
.Nm TAILQ_CLASS_ENTRY ,
.Nm TAILQ_CLASS_HEAD ,
.Nm TAILQ_CONCAT ,
.Nm TAILQ_EMPTY ,
.Nm TAILQ_ENTRY ,
.Nm TAILQ_FIRST ,
.Nm TAILQ_FOREACH ,
.Nm TAILQ_FOREACH_FROM ,
.Nm TAILQ_FOREACH_SAFE ,
.Nm TAILQ_FOREACH_FROM_SAFE ,
.Nm TAILQ_FOREACH_REVERSE ,
.Nm TAILQ_FOREACH_REVERSE_FROM ,
.Nm TAILQ_FOREACH_REVERSE_SAFE ,
.Nm TAILQ_FOREACH_REVERSE_FROM_SAFE ,
.Nm TAILQ_FOREACH_REVERSE_SAFE ,
.Nm TAILQ_FOREACH_SAFE ,
.Nm TAILQ_HEAD ,
.Nm TAILQ_HEAD_INITIALIZER ,
.Nm TAILQ_INIT ,
......@@ -122,52 +132,60 @@ lists and tail queues
.Xr libbsd 7
for include usage.)
.\"
.Fn SLIST_CLASS_ENTRY "CLASSTYPE"
.Fn SLIST_CLASS_HEAD "HEADNAME" "CLASSTYPE"
.Fn SLIST_CONCAT "SLIST_HEAD *head1" "SLIST_HEAD *head2" "TYPE" "SLIST_ENTRY NAME"
.Fn SLIST_EMPTY "SLIST_HEAD *head"
.Fn SLIST_ENTRY "TYPE"
.Fn SLIST_FIRST "SLIST_HEAD *head"
.Fn SLIST_FOREACH "TYPE *var" "SLIST_HEAD *head" "SLIST_ENTRY NAME"
.Fn SLIST_FOREACH_FROM "TYPE *var" "SLIST_HEAD *head" "SLIST_ENTRY NAME"
.Fn SLIST_FOREACH_SAFE "TYPE *var" "SLIST_HEAD *head" "SLIST_ENTRY NAME" "TYPE *temp_var"
.Fn SLIST_FOREACH_FROM_SAFE "TYPE *var" "SLIST_HEAD *head" "SLIST_ENTRY NAME" "TYPE *temp_var"
.Fn SLIST_FOREACH_SAFE "TYPE *var" "SLIST_HEAD *head" "SLIST_ENTRY NAME" "TYPE *temp_var"
.Fn SLIST_HEAD "HEADNAME" "TYPE"