It assumes the parent is a vector or scalar so we need to fail if it
isn't.

Fixes: 9190f82d "nir/opt_deref: Add an optimization for bitcasts"
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <!7064>

Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <mesa/mesa!7068>

It fixes coverity issue: CID 1467703: (RESOURCE_LEAK):
`Variable "cp" going out of scope leaks the storage it points to.`

Fixes: 23c3eb1f ("driconf: Delete disjoint range support")
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7021>

64-bit IO are lowered with NIR.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <mesa/mesa!7008>

To match ACO.

fossilds-db (Navi10):
Totals from 20869 (15.30% of 136420) affected shaders:
SGPRs: 1851128 -> 1851920 (+0.04%); split: -0.41%, +0.46%
VGPRs: 1607360 -> 1608212 (+0.05%); split: -0.20%, +0.25%
SpillSGPRs: 267331 -> 261350 (-2.24%); split: -3.67%, +1.43%
CodeSize: 155460104 -> 155303508 (-0.10%); split: -0.21%, +0.11%
MaxWaves: 179156 -> 178928 (-0.13%); split: +0.48%, -0.60%

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <mesa/mesa!6932>

With fmed3 if available, otherwise fallback to fmin/fmax.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <!6932>

To get more consistent performance and results, use the performance
devfreq governor and disable PM runtime.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <mesa/mesa!7011>

For testing Panfrost on Bifrost GPUs, add a job for dEQP GLES2 testing.

Right now almost all tests are skipped, but as we make progress and
things show stable, we'll be running more and more tests.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <!7011>

Update to v5.9-rc5-based drm-misc-for-next, so we can run jobs on
machines with Bifrost GPUs.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <!7011>

This makes freedreno advertise support for
PIPE_FORMAT_R8_G8B8_420_UNORM on a6xx, which enables lowering NV12 to
this format.

Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <mesa/mesa!6693>

Add resource pointers ptr1 and ptr2 and offsets offset1 and offset2,
and just emit relocs if the pointers are non-NULL.  This lets us move
a little more logic to the CSO building.

Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <mesa/mesa!6693>

Some GPUs can sample biplanar formats like NV12 natively, returning
the YUV values. Add a lowering type that uses that for sampling and
relies on existing colorspace conversions.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <!6693>

This is a planar, subsampled format. It's basically NV12, but without
colorspace conversion.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <mesa/mesa!6693>

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <mesa/mesa!3932>

On Gen7, the data cache is pretty terrible so we'd rather avoid it
there.  On Gen8+, it should be fine and is less likely to conflict with
texturing so we should get less cache thrashing there.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <!3932>

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <mesa/mesa!3932>

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <!3932>

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <!3932>

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <!3932>

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <!3932>

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <mesa/mesa!3932>

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <!7049>

It's identical to nir_intrinsic_load_global except that it works on data
that's guaranteed to be constant throughout the shader invocation.

Fixes: ff2f44d8 "intel/fs: Implement nir_intrinsic_load_global_constant"
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <!6872>

In 53bfcdee, we added load/store_scratch instructions which deviate
a little bit from most memory load/store instructions in that we can't
use the normal untyped read/write instructions which can read and write
up to a vec4 at a time.  Instead, we have to use the DWORD scattered
read/write instructions which are scalar.  To handle this, we added code
to brw_nir_lower_mem_access_bit_sizes to cause them to be scalarized.
However, one case was missing: the load-as-larger-vector case.  In this
case, we take small bit-sized constant-offset loads replace it with a
32-bit load and shuffle the result around as needed.

For scratch, this case is much trickier to get right because it often
emits vec2 or wider which we would then have to lower again.  We did
this for other load and store ops because, for lower bit-sizes we have
to scalarize thanks to the byte scattered read/write instructions being
scalar.  However, for scratch we're not losing as much because we can't
vectorize 32-bit loads and stores either.  It's easier to just disallow
it whenever we have to scalarize.

Fixes: 53bfcdee "intel/fs: Implement the new load/store_scratch..."
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <!6872>

This adds support for building clover/llvmpipe and running the
piglit CL tests on it.

It uses the gl testing container, and add builds the libclc
spirv libraries as part of that which requires the llvm spirv
translator in the build container.

It also builds the llvm spirv translator as part of the build
root and creates a mesa build that builds clover for testing
against it. It uses llvm 10 as the baseline.

This drops bswap as it has an oob memory access with llvmpipe
which cause flaky test results. phatk also seems flaky

Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <!6901>

For some reason, the radeonsi Tracie definition had the piano traces
listed twice.

Noted by @airlied

Part-of: <!7052>

This puts it in a shared place where everyone can get at it.

Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <!7034>

v2 (Jason Ekstrand):
 - Use the newly added nir_can_find_libclc() helper

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <mesa/mesa!7034>

Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <!7034>

So that it's not tied directly to clover.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <mesa/mesa!7034>

Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <mesa/mesa!7034>

If -b is specified, we don't add a null to the end of the char array.
If -b is not specified, we assert that there are no nulls in the middle.

Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <mesa/mesa!7034>

This keeps us from hitting the 65k string limit on MSVC

Part-of: <mesa/mesa!7034>

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <mesa/mesa!7034>

sys and string are unused, os is needed but not imported

fixes: 412472da
       ("glsl: Add utility to convert text files to C strings")

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <!7034>

This can be useful if you rsync an install between two machines and the
paths don't perfectly match up.  OpenGL drivers already work fine but
anything which uses pipe-loader has a compile-time path.

Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <mesa/mesa!7047>

This commit enables clover support for iris.  It is intended as a
compiler developer tool and not as a new OpenCL implementation from
Intel.  If you want competent OpenCL, we have a different open-source
driver for that built on our LLVM-based IGC compiler stack.  However,
using clover with iris is becoming increasingly useful as a compiler
development tool and I'm getting tired of carrying the patches in a
private branch.

By default, clover will not initialize on iris.  To enable clover, set
the IRIS_ENABLE_CLOVER environment variable to "1" or "true".  As we've
done with the semi-sketchy platform support in ANV, it dumps a very loud
WARNING to stderr when enabled.  Use at your own risk.

NOTE: To anyone intending to benchmark this, the performance is going to
be terrible and that is expected.  This is in no way representative of
the Intel/NIR compiler stack.  As it currently stands, clover passes
-O0 to clang when compiling OpenCL C to make SPIRV-LLVM-Transator work.
When compiling the SPIR-V, clover currently doesn't run any NIR
optimizations before it lowers memory access so any NIR optimizations
iris attempts to do are severely hampered.  One day, clover will get a
NIR optimization loop or the ability to hand things off to the driver
per-lowering but today is not that day.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <mesa/mesa!7047>

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <mesa/mesa!7047>

The value specified in pipe_compute_state is in addition to the implicit
value computed by NIR.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <mesa/mesa!7047>

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <!7047>