Commit 5af33808 authored by Sebastian Dröge's avatar Sebastian Dröge 🍵

Release 1.1.3

parent 41c01f19
=== release 1.1.3 ===
2013-07-29 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
releasing 1.1.3
2013-07-29 12:10:45 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* libs/gst/base/gstbaseparse.c:
* libs/gst/base/gstbasesink.c:
* libs/gst/base/gstbasesrc.c:
base: Fix handling of SEGMENT query
The values should be in stream-time, and start/stop should not
be swapped for negative rates.
2013-07-29 11:05:09 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* plugins/elements/gsttypefindelement.c:
typefind: Only advance offset by the number of bytes we actually read
There might be a short read at EOS.
2013-07-29 10:48:30 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* libs/gst/base/gstbaseparse.c:
baseparse: Implement SEGMENT query
2013-07-26 18:36:04 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst/gstbuffer.c:
buffer: fix Since: marker for new gst_buffer_extract_dup()
2013-07-26 12:19:32 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* gst/gstclock.c:
clock: debug the clock return values
2013-07-25 12:20:14 -0300 Thiago Santos <thiago.sousa.santos@collabora.com>
* libs/gst/base/gstbaseparse.c:
baseparse: fix seqnum handling for seeks
Use the same seqnum as the seek for flushes/segments that are
caused by the seek. Also do the same for segment events
Fixes #676242
2013-07-24 10:29:30 -0700 David Schleef <ds@schleef.org>
* gst/gstinfo.c:
info: parse debug levels > 9
2013-07-24 16:57:46 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* gst/gstvalue.c:
value: Fix copy&paste mistakes in the bitmask function docs
2013-07-24 11:21:27 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* libs/gst/base/gstbasesink.c:
basesink: Don't shadow variables that are set inside our scope and then used outside our scope
Fixes uninitialized use of these variables.
2013-07-24 10:30:25 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* tests/check/gst/struct_arm.h:
* tests/check/gst/struct_hppa.h:
* tests/check/gst/struct_i386.h:
* tests/check/gst/struct_i386w.h:
* tests/check/gst/struct_ppc32.h:
* tests/check/gst/struct_ppc64.h:
* tests/check/gst/struct_sparc.h:
* tests/check/gst/struct_x86_64.h:
tests: Remove other interface structs from the ABI tests too
2010-10-15 13:16:59 -0300 Thiago Santos <thiago.sousa.santos@collabora.co.uk>
* tests/check/gst/struct_arm.h:
* tests/check/gst/struct_hppa.h:
* tests/check/gst/struct_i386.h:
* tests/check/gst/struct_i386w.h:
* tests/check/gst/struct_ppc32.h:
* tests/check/gst/struct_ppc64.h:
* tests/check/gst/struct_sparc.h:
* tests/check/gst/struct_x86_64.h:
tests: Remove GstTagSetter from ABI checks
Interfaces can have new members added without breaking ABI, so
remove it from the check.
https://bugzilla.gnome.org/show_bug.cgi?id=623799
2013-07-23 15:39:53 -0400 Thibault Saunier <thibault.saunier@collabora.com>
* libs/gst/check/libcheck/check_print.c:
libcheck: Escape strings in the generated xml files
This is copy pasted from upstream libcheck
2013-07-23 18:53:44 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* libs/gst/base/gstbasesink.c:
basesink: Print some debug output if a stream-start event without group-id arrives
Ideally all elements would implement handling of that to get proper
stream-start message handling and other things.
2013-07-22 18:03:01 +0200 Arnaud Vrac <avrac@freebox.fr>
* plugins/elements/gstinputselector.c:
input-selector: Fix missing pad activation notification
A new active pad might not be notified in some cases, which results
in the current track number not being set in playbin.
The active-pad notification is only sent in the chain and sink_event
functions, and only when the buffer or event that triggered the active
pad selection is from the newly activated pad. So in the other case
the notification will never be sent.
https://bugzilla.gnome.org/show_bug.cgi?id=704691
2013-07-22 17:25:47 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* gst/gstvalue.c:
value: handle deserialisation of nonexistant enum value more gracefully
2013-07-22 14:12:18 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* plugins/elements/gstinputselector.c:
* plugins/elements/gstinputselector.h:
inputselector: Don't push new stream-start events on stream change unless they all have group ids
https://bugzilla.gnome.org/show_bug.cgi?id=704408
2013-07-22 12:06:29 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* plugins/elements/gsttypefindelement.c:
typefind: Use new group-id in stream-start event
2013-07-22 12:06:08 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* libs/gst/base/gstbaseparse.c:
* libs/gst/base/gstbasesink.c:
* libs/gst/base/gstbasesrc.c:
base: Use new group-id field in stream-start event and message
2013-07-22 11:42:18 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* gst/gstbin.c:
bin: Use the new group-id field of the stream-start message for stream-start message aggregation
If all stream-start messages had a group id (for backwards compatibility),
we only consider a stream started if all had the same group id.
In 2.0 we should make the group id mandatory.
2013-07-22 11:41:35 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* docs/gst/gstreamer-sections.txt:
* gst/gstevent.c:
* gst/gstevent.h:
* gst/gstmessage.c:
* gst/gstmessage.h:
* gst/gstquark.c:
* gst/gstquark.h:
* gst/gstutils.c:
* gst/gstutils.h:
* win32/common/libgstreamer.def:
gst: Add new group-id field to the stream-start event
All streams that have the same group id are supposed to be played
together, i.e. all streams inside a container file should have the
same group id but different stream ids. The group id should change
each time the stream is started, resulting in different group ids
each time a file is played for example.
2013-07-18 23:29:49 +0100 Tim-Philipp Müller <tim@centricular.net>
* common:
common: revert accidental change of common submodule
2013-07-18 14:39:42 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* gst/gstcaps.c:
* gst/gstmessage.c:
* gst/gstmessage.h:
gst: Add some more Since: 1.2
2013-07-18 14:34:31 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* gst/gstinfo.c:
info: Add some Since: 1.2
2013-07-18 15:10:10 +0400 Руслан Ижбулатов <lrn1986@gmail.com>
* common:
* docs/gst/gstreamer-sections.txt:
* docs/gst/running.xml:
* docs/manual/appendix-checklist.xml:
* gst/gst.c:
* gst/gstinfo.c:
* gst/gstinfo.h:
* tools/gst-launch.1.in:
* tools/gst-plot-timeline.py:
* win32/common/libgstreamer.def:
info: Add debug color mode option
This allows to explicitely set the debug output color
mode to UNIX on every platform, enable it (use platform
default color mode) or enable it.
https://bugzilla.gnome.org/show_bug.cgi?id=674320
2012-04-18 14:35:32 +0400 Руслан Ижбулатов <lrn1986@gmail.com>
* gst/gstinfo.c:
info: Fix black and underline coloring on W32
Fixes #674320
2012-04-18 14:12:16 +0400 Руслан Ижбулатов <lrn1986@gmail.com>
* gst/gstinfo.c:
info: Cut down src file names for MinGW too
Fixes #674320
2013-07-16 17:47:45 +0200 Nicola Murino <nicola.murino@gmail.com>
* scripts/gst-uninstalled:
gst-uninstalled: Fix gst-plugins-gl in uninstalled setup
https://bugzilla.gnome.org/show_bug.cgi?id=703499
2013-07-16 15:35:08 -0400 Olivier Crête <olivier.crete@collabora.com>
* libs/gst/base/gstadapter.c:
* tests/check/libs/adapter.c:
adapter: Take account of the skip in gst_adapter_take_buffer_fast()
Include regression test
2013-07-15 15:41:44 -0400 Olivier Crête <olivier.crete@collabora.com>
* libs/gst/base/gstadapter.c:
* libs/gst/base/gstadapter.h:
* tests/check/libs/adapter.c:
* win32/common/libgstbase.def:
adapter: Add function to return buffer composed of multiple memories
API: gst_adapter_take_fast()
2013-07-16 16:24:38 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* gst/gstquery.c:
query: Don't assert if no context is set in the query
2013-07-16 14:47:05 +0100 Tim-Philipp Müller <tim@centricular.net>
* tests/benchmarks/.gitignore:
benchmarks: ignore new benchmark binary
2013-07-16 14:46:15 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst/gstquery.c:
* gst/gstquery.h:
query: sprinkle some Since 1.2 markers in docs
2013-07-16 14:44:03 +0100 Tim-Philipp Müller <tim@centricular.net>
* libs/gst/net/gstnettimeprovider.c:
timeprovider: g-i: allow None as address for gst_net_time_provider_new()
2013-07-16 15:34:57 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* gst/gstelement.c:
element: Return an empty GstContext if none was set yet
2013-07-16 15:16:16 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* docs/gst/gstreamer-sections.txt:
* gst/gstquery.c:
* gst/gstquery.h:
* win32/common/libgstreamer.def:
query: Add gst_query_has_context_type()
2013-07-16 11:36:50 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* plugins/elements/gstmultiqueue.c:
multiqueue: only block serialized query when it's safe
We must be certain that we don't cause a deadlock when blocking the serialized
queries. One such deadlock can happen when we are buffering and downstream is
blocked in preroll and a serialized query arrives. Downstream will not unblock
(and allow our query to execute) until we complete buffering and buffering will
not complete until we can answer the query..
https://bugzilla.gnome.org/show_bug.cgi?id=702840
2013-07-15 11:36:18 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* gst/gstpad.c:
pad: A newly activated pad should be marked as needing reconfiguration
2013-07-15 11:32:54 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* gst/gstpad.c:
Revert "pad: Don't consider flushing pads as needing reconfiguration"
This reverts commit 948a9d2f2b728f5fb60be45d47a818cebeb60c7d.
This is racy and trying to reconfigure and fail is still better
than not trying to reconfigure at all.
https://bugzilla.gnome.org/show_bug.cgi?id=704100
2013-07-15 11:32:10 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* libs/gst/base/gstbasesrc.c:
basesrc: Leave the loop function faster if we're flushing
Especially don't even try to send stream-start event or try
to negotiate.
https://bugzilla.gnome.org/show_bug.cgi?id=704100
2013-07-12 10:08:26 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* plugins/elements/gstinputselector.c:
inputselector: Deactivate and remove pad without the inputselector lock
Otherwise we might get deadlocks caused by lock order inversion:
During the chain function the stream lock is first locked and then the
inputselector lock. During pad release we first locked the inputselector
lock and then deactivating the pad would lock the stream lock.
There's no reason why the inputselector lock should be required while
deactivating and removing the pad, it's only needed before.
https://bugzilla.gnome.org/show_bug.cgi?id=704002
2013-07-11 16:57:06 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* configure.ac:
Back to development
=== release 1.1.2 ===
2013-07-11 Sebastian Dröge <sebastian.droege@collabora.co.uk>
2013-07-11 15:12:39 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* ChangeLog:
* NEWS:
* RELEASE:
* configure.ac:
releasing 1.1.2
* docs/plugins/inspect/plugin-coreelements.xml:
* gstreamer.doap:
* win32/common/config.h:
* win32/common/gstversion.h:
Release 1.1.2
2013-07-11 15:11:27 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* po/af.po:
* po/az.po:
* po/be.po:
* po/bg.po:
* po/ca.po:
* po/cs.po:
* po/da.po:
* po/de.po:
* po/el.po:
* po/en_GB.po:
* po/eo.po:
* po/es.po:
* po/eu.po:
* po/fi.po:
* po/fr.po:
* po/gl.po:
* po/hu.po:
* po/id.po:
* po/it.po:
* po/ja.po:
* po/lt.po:
* po/nb.po:
* po/nl.po:
* po/pl.po:
* po/pt_BR.po:
* po/ro.po:
* po/ru.po:
* po/rw.po:
* po/sk.po:
* po/sl.po:
* po/sq.po:
* po/sr.po:
* po/sv.po:
* po/tr.po:
* po/uk.po:
* po/vi.po:
* po/zh_CN.po:
* po/zh_TW.po:
Update .po files
2013-07-10 15:52:10 +0200 Sebastian Dröge <slomo@circular-chaos.org>
This is GStreamer 1.1.2
This is GStreamer 1.1.3
Release notes for GStreamer 1.1.2
Release notes for GStreamer 1.1.3
The GStreamer team is proud to announce a new bug-fix release
......@@ -45,14 +45,11 @@ Features of this release
Bugs fixed in this release
* 652037 : basesrc: less persistent caching of size
* 701985 : gst-launch: Unreffing GstContext that is still used
* 702089 : gst_init: Don't intercept --help
* 702520 : queue: deadlock when reconfigure event
* 702632 : acceptcaps query can be very very slow
* 703267 : funnel: Needs to be usable in playbin
* 703377 : gst_check_setup_events() and multiple src or sink pads
* 703682 : POTFILES.in is out of date
* 674320 : Various improvements for logging on W32
* 676242 : [metabug] Verify that elements handle seqnum for seeks correctly
* 704333 : gst-uninstalled: fix gst-plugins-gl in unistalled setup
* 704408 : inputselector: stream start event forwarding prevents track change
* 704691 : input-selector: active pad not notified
==== Download ====
......@@ -89,19 +86,14 @@ subscribe to the gstreamer-devel list.
Contributors to this release
* Brendan Long
* Edward Hervey
* Hans de Goede
* Jonas Holmberg
* Kim Lam
* Nicolas Dufresne
* Arnaud Vrac
* David Schleef
* Nicola Murino
* Olivier Crête
* Paul HENRYS
* Piotr Drąg
* Sebastian Dröge
* Sjoerd Simons
* Stefan Sauer
* Thiago Santos
* Thibault Saunier
* Tim-Philipp Müller
* Wim Taymans
* Руслан Ижбулатов
 
\ No newline at end of file
common @ 04c7a1ec
Subproject commit 01a7a46e258177ffe9cdb09c6518db749b2325d4
Subproject commit 04c7a1ec1b9ced0b4359b3bbb2d8dc87bc7642c8
......@@ -4,7 +4,7 @@ dnl initialize autoconf
dnl when going to/from release please set the nano (fourth number) right !
dnl releases only do Wall, git and prerelease does Werror too
dnl
AC_INIT([GStreamer],[1.1.2.1],[http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer],[gstreamer])
AC_INIT([GStreamer],[1.1.3],[http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer],[gstreamer])
AG_GST_INIT
dnl initialize automake (we require GNU make)
......@@ -64,7 +64,7 @@ dnl 1.2.5 => 205
dnl 1.10.9 (who knows) => 1009
dnl
dnl sets GST_LT_LDFLAGS
AS_LIBTOOL(GST, 102, 0, 102)
AS_LIBTOOL(GST, 103, 0, 103)
dnl *** autotools stuff ****
......
......@@ -3,7 +3,7 @@
<description>GStreamer core elements</description>
<filename>../../plugins/elements/.libs/libgstcoreelements.so</filename>
<basename>libgstcoreelements.so</basename>
<version>1.1.2</version>
<version>1.1.3</version>
<license>LGPL</license>
<source>gstreamer</source>
<package>GStreamer source release</package>
......
......@@ -38,6 +38,16 @@ hierarchy, and a set of media-agnostic core elements.
</GitRepository>
</repository>
<release>
<Version>
<revision>1.1.3</revision>
<branch>1.1</branch>
<name></name>
<created>2013-07-29</created>
<file-release rdf:resource="http://gstreamer.freedesktop.org/src/gstreamer/gstreamer-1.1.3.tar.xz" />
</Version>
</release>
<release>
<Version>
<revision>1.1.2</revision>
......
......@@ -62,7 +62,7 @@
#define GST_PACKAGE_ORIGIN "Unknown package origin"
/* GStreamer package release date/time for plugins as YYYY-MM-DD */
#define GST_PACKAGE_RELEASE_DATETIME "2013-07-11"
#define GST_PACKAGE_RELEASE_DATETIME "2013-07-29"
/* Define if static plugins should be built */
#undef GST_PLUGIN_BUILD_STATIC
......@@ -357,7 +357,7 @@
#define PACKAGE_NAME "GStreamer"
/* Define to the full name and version of this package. */
#define PACKAGE_STRING "GStreamer 1.1.2"
#define PACKAGE_STRING "GStreamer 1.1.3"
/* Define to the one symbol short name of this package. */
#define PACKAGE_TARNAME "gstreamer"
......@@ -366,7 +366,7 @@
#undef PACKAGE_URL
/* Define to the version of this package. */
#define PACKAGE_VERSION "1.1.2"
#define PACKAGE_VERSION "1.1.3"
/* directory where plugins are located */
#ifdef _DEBUG
......@@ -404,7 +404,7 @@
#undef USE_POISONING
/* Version number of package */
#define VERSION "1.1.2"
#define VERSION "1.1.3"
/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
significant byte first (like Motorola and SPARC, unlike Intel). */
......
......@@ -755,6 +755,25 @@ gst_debug_color_flags_get_type (void)
return (GType) id;
}
GType
gst_debug_color_mode_get_type (void)
{
static gsize id = 0;
static const GEnumValue values[] = {
{C_ENUM (GST_DEBUG_COLOR_MODE_OFF), "GST_DEBUG_COLOR_MODE_OFF", "off"},
{C_ENUM (GST_DEBUG_COLOR_MODE_ON), "GST_DEBUG_COLOR_MODE_ON", "on"},
{C_ENUM (GST_DEBUG_COLOR_MODE_UNIX), "GST_DEBUG_COLOR_MODE_UNIX", "unix"},
{0, NULL, NULL}
};
if (g_once_init_enter (&id)) {
GType tmp = g_enum_register_static ("GstDebugColorMode", values);
g_once_init_leave (&id, tmp);
}
return (GType) id;
}
/* enumerations from "gstiterator.h" */
GType
gst_iterator_result_get_type (void)
......
......@@ -93,6 +93,8 @@ GType gst_debug_level_get_type (void);
#define GST_TYPE_DEBUG_LEVEL (gst_debug_level_get_type())
GType gst_debug_color_flags_get_type (void);
#define GST_TYPE_DEBUG_COLOR_FLAGS (gst_debug_color_flags_get_type())
GType gst_debug_color_mode_get_type (void);
#define GST_TYPE_DEBUG_COLOR_MODE (gst_debug_color_mode_get_type())
/* enumerations from "gstiterator.h" */
GType gst_iterator_result_get_type (void);
......
......@@ -57,7 +57,7 @@ G_BEGIN_DECLS
*
* The micro version of GStreamer at compile time:
*/
#define GST_VERSION_MICRO (2)
#define GST_VERSION_MICRO (3)
/**
* GST_VERSION_NANO:
*
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment