Commit c1b4b0f8 authored by Tim-Philipp Müller's avatar Tim-Philipp Müller 🐙

Release 1.14.5

parent 2d9a02e5
This diff is collapsed.
......@@ -5,13 +5,16 @@ GSTREAMER 1.14 RELEASE NOTES
GStreamer 1.14.0 was originally released on 19 March 2018.
The latest bug-fix release in the 1.14 series is 1.14.3 and was released
on 16 September 2018.
The latest bug-fix release in the 1.14 series is 1.14.5 and was released
on 29 May 2019.
1.14.5 will likely be the last release in the 1.14 release series which
has now been superseded by the 1.16 release series.
See https://gstreamer.freedesktop.org/releases/1.14/ for the latest
version of this document.
_Last updated: Sunday 16 September 2018, 13:00 UTC (log)_
_Last updated: Wednesday 29 May 2019, 12:00 UTC (log)_
Introduction
......@@ -1519,6 +1522,187 @@ For a full list of bugfixes see Bugzilla. Note that this is not the full
list of changes. For the full list of changes please refer to the GIT
logs or ChangeLogs of the particular modules.
1.14.5
The fifth and likely last 1.14 bug-fix release (1.14.5) was released on
29 May 2019.
This release only contains bugfixes and it should be safe to update from
1.14.x.
Highlighted bugfixes in 1.14.5
GStreamer core
- aggregator: take the pad lock around queue gap event removal
- aggregator: don’t leak gap buffer when out of segment
- buffer: fix possible memory corruption in gst_buffer_foreach_meta()
when removing metas
- bus: Make removing of signal/bus watches thread-safe
- bus: Don’t allow removing signal watches with gst_bus_remove_watch()
- controlbinding: Check if the weak pointer was cleared before
explicitly removing it
- ptp clock: Wait for ANNOUNCE before selecting a master; increase
tolerance for late follow-up and delay-resp
- segment: Allow stop == -1 in gst_segment_to_running_time() and
negative rate
- g-i: annotations fixes
gst-plugins-base
- audioconvert: fix endianness conversion for unpacked formats
(e.g. S24_32BE)
- audioringbuffer: Fix wrong memcpy address when reordering channels
- decodebin2: Make sure to remove pad probes when freeing
GstDecodeGroup
- glviewconvert: fix output when a transformation matrix is used
- glupload: prevent segfault when updating caps
- gl/egl: Determine correct format on dmabuf import
- glupload: dmabuf: be explicit about gl formats used
- id3tag: validate the year from v1 tags before passing to GstDateTime
- rtpbasepayload: fix sequence numbers when using buffer lists
- rtspconnection: fix security issue, potential heap overflow
(CVE-2019-9928)
- rtspconnection: fix GError set over the top of a previous GError
- rtspconnection: do not duplicate authentication headers
- subparse: don’t assert when failing to parse subrip timestamp
- video: various convert sample frame fixes
- video-converter: fix conversion from I420_10LE/BE, I420_12LE/BE,
A420_10LE/BE to BGRA/RGBA which created corrupted output
- video-format: Fix GBRA_10/12 alpha channel pixel strides
gst-plugins-good
- flv: Use 8kHz sample rate for alaw/mulaw audio
- flvdemux: Do not error out if the first added and chained pad is not
linked
- flvmux: try harder to make sure timestamps are always increasing
- gdkpixbufdec: output a TIME segment which is what’s expected for raw
video
- matroskademux: fix handling of MS ACM audio
- matroska: fix handling of FlagInterlaced
- pulsesink: Deal with not being able to convert a format to caps
- rtph265depay, rtph264depay; aggregation packet marker handling fixes
- rtpmp4gdepay: detect broken senders who send AAC with ADTS frames
- rtprawdepay: keep buffer pool around when flushing/seeking
- rtpssrcdemux: Forward serialized events to all pads
- qmlglsink: Handle OPENGL header guard changes
- qtdemux: fix track language code parsing; ignore corrupted CTTS box
- qtmux: Correctly set tkhd width/height to the display size
- splitmuxsink: various timecode meta handling fixes
- splitmuxsink: make work with audio-only encoders as muxers,
e.g. wavenc
- v4l2sink: fix pool-less allocation query handling
- v4l2dec/enc: fix use after free when handling events
- vpx: Fix build against libvpx 1.8
- webmmux: allow resolutions above 4096
gst-plugins-ugly
- sid: Fix cross-compilation by using AC_TRY_LINK instead of
AC_TRY_RUN
- x264: Only enable dynamic loading code for x264 before v253
gst-plugins-bad
- assrender: fix disappearing subtitles when seeking back in time
- decklinkvideosink: fix segfault when audiosink is closed before
videosink
- decklinkvideosrc: respect pixel format property even if mode is set
to auto
- d3dvideosink: Fix calculating buffer size of packed format; don’t
leak thread object
- dtls: Don’t abort on non-fatal issues, make work with newer OpenSSL
versions
- msdk: more robust error handling; fix intel sdk libdir path
- nvenc: Ensure drain all frames on finish; fix element reuse and
clean up properly
- openh264dec: Fix handling of errors when doing EOS
- shmsrc: fixes a crash when is-live is true due a race condition
- shmsink: fix possible (racy) deadlock on shutdown
- siren: Fix invalid floating point operation
- tsdemux: Skew correction improvements: use upstream DTS if set
- wasapi: number of segments was always 2 (the absolute minimum) by
accident
- wasapi: Fix infinite loop when the device disappears
gst-libav
- libav: Update internal snapshot to ffmpeg n3.4.6
- avdemux: fix negative pts if start_time is bigger than the ts
gst-rtsp-server
- rtsp-client: Fix crash in close handler and remove timeout GSource
on cleanup
- rtsp-stream: Use cached address when allocating sockets
- rtsp-media: Handle set state when preparing
- rtsp-media: Fix race condition in finish_unprepare
- rtsp-stream: Use seqnum-offset for rtpinfo
- rtsp-stream: add source elements to the pipeline before activation
for stream-status create message
gst-editing-services
- Fix compilation with latest GLib
- layer: Resort clips before syncing priorities
- timeline: Better handle loading inconsistent timelines
gstreamer-vaapi
- thread-safety and memory leak fixes
- improve caps negotiation if downstream takes ANY caps
- fix build with -DG_DISABLE_ASSERT
gst-omx
- fix caps leak
cerbero
- Add support for MacOSX 10.14, iOS 12.1, Fedora 29/30, Linux Mint
Tara (19)
- Miscellaneous tarball download / error handling improvements
- disable parallel builds by default on Windows
Contributors to 1.14.5
Aaron Boxer, Adam Jackson, Aleix Conchillo Flaqué, Alexandru Băluț,
Alicia Boya García, Andreas Frisch, Antonio Ospite, Arun Raghavan,
Benjamin Berg, Brad Reitmeyer, Christopher Snowhill, Daniel Drake,
Daniel Stone, Dardo D Kleiner, David Ing, Denis Nagorny, Edward Hervey,
Erlend Eriksen, Florent Thiéry, Freyr666, Göran Jönsson, Guillaume
Desmottes, Haihao Xiang, Haihua Hu, Havard Graff, He Junyan, Helmut
Grohne, Ilya Smelykh, Jacek Tomaszewski, James Cowgill, Jan Alexander
Steffens (heftig), Jan Schmidt, Johan Bjäreholt, Jordan Petridis, Josep
Torra, Joshua M. Doe, Justin Kim, Kristofer Bjorkstrom, Lars Petter
Endresen, Lars Wiréen, Linus Svensson, Lucas Stach, Maciej Wolny,
Marc-André Lureau, Marc Leeman, Marcos Kintschner, Marco Trevisan
(Treviño), Marouen Ghodhbane, Matej Knopp, Mathieu Duponchelle, Matthew
Waters, Michael Olbrich, Michael Tretter, mrk501, Naveen Cherukuri,
Nicola Murino, Nicolas Dufresne, Niels De Graef, Nirbheek Chauhan,
okuoku, Olivier Crête, Patricia Muscalu, Per Forlin, Peter Körner,
Philippe Normand, Philipp Zabel, Roland Jon, Russel Winder, Santiago
Carot-Nemesio, Sebastian Dröge, Seungha Yang, Sjoerd Simons, Thiago
Santos, Thibault Saunier, Tim-Philipp Müller, Tobias Ronge, Tomislav
Tustonić, U. Artie Eoff, Víctor Manuel Jáquez Leal, Vincenzo Bono, Vivia
Nikolaidou, Wangfei, Wim Taymans, Xabier Rodriguez Calvar, Xavier
Claessens, Xiang, Haihao, Yeongjin Jeong, and many others. Thank you
all!
List of bugs fixed in 1.14.5
For a full list of bugfixes see Bugzilla. Note that this is not the full
list of changes. For the full list of changes please refer to the GIT
logs or ChangeLogs of the particular modules.
During the release cycle issue and patch tracking moved from bugzilla to
gitlab, so information about this release may be on either of those two
trackers.
MRs with milestone 1.14.5:
https://gitlab.freedesktop.org/groups/gstreamer/-/merge_requests?scope=all&utf8=%E2%9C%93&state=all&milestone_title=1.14.5
Known Issues
......@@ -1541,12 +1725,8 @@ Our next major feature release will be 1.16, and 1.15 will be the
unstable development version leading up to the stable 1.16 release. The
development of 1.15/1.16 will happen in the git master branch.
The plan for the 1.16 development cycle is yet to be confirmed, but it
is expected that feature freeze will be around September 2018 followed
by several 1.15 pre-releases and the new 1.16 stable release in October.
1.16 will be backwards-compatible to the stable 1.14, 1.12, 1.10, 1.8,
1.6, 1.4, 1.2 and 1.0 release series.
1.16.0 was released on 19 April 2019 and is backwards-compatible to the
stable 1.14, 1.12, 1.10, 1.8, 1.6, 1.4, 1.2 and 1.0 release series.
------------------------------------------------------------------------
......
GStreamer 1.13.x development series
GStreamer 1.14.x development series
WHAT IT IS
----------
......
This is GStreamer gst-plugins-base 1.14.4.
This is GStreamer gst-plugins-base 1.14.5.
The GStreamer team is pleased to announce another bug-fix release in the
stable 1.x API series of your favourite cross-platform multimedia framework!
......@@ -7,6 +7,10 @@ The 1.14 release series adds new features on top of the 1.12 series and is
part of the API and ABI-stable 1.x release series of the GStreamer multimedia
framework.
The 1.14 release series has now been superseded by the stable 1.16 series
which was released on 19 April 2019 and should be backwards compatible. We
recommend you upgrade to 1.16 at your earliest convenience.
Full release notes can be found at:
https://gstreamer.freedesktop.org/releases/1.14/
......@@ -54,10 +58,10 @@ with other GStreamer modules for a complete multimedia experience.
==== Download ====
You can find source releases of gstreamer in the download
directory: https://gstreamer.freedesktop.org/src/gstreamer/
directory: https://gstreamer.freedesktop.org/src/
The git repository and details how to clone it can be found at
https://cgit.freedesktop.org/gstreamer/gstreamer/
https://gitlab.freedesktop.org/gstreamer/
==== Homepage ====
......@@ -65,10 +69,16 @@ The project's website is https://gstreamer.freedesktop.org/
==== Support and Bugs ====
We use GNOME's bugzilla for bug reports and feature requests:
https://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer
We have recently moved from GNOME Bugzilla to GitLab on freedesktop.org
for bug reports and feature requests:
https://gitlab.freedesktop.org/gstreamer
Please submit patches via GitLab as well, in form of Merge Requests. See
https://gstreamer.freedesktop.org/documentation/contribute/
Please submit patches via bugzilla as well.
for more details.
For help and support, please subscribe to and send questions to the
gstreamer-devel mailing list (see below for details).
......
......@@ -5,7 +5,7 @@ dnl please read gstreamer/docs/random/autotools before changing this file
dnl initialize autoconf
dnl releases only do -Wall, git and prerelease does -Werror too
dnl use a three digit version number for releases, and four for git/prerelease
AC_INIT([GStreamer Base Plug-ins],[1.14.4],[http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer],[gst-plugins-base])
AC_INIT([GStreamer Base Plug-ins],[1.14.5],[http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer],[gst-plugins-base])
AG_GST_INIT
......@@ -56,10 +56,10 @@ dnl 1.2.5 => 205
dnl 1.10.9 (who knows) => 1009
dnl
dnl sets GST_LT_LDFLAGS
AS_LIBTOOL(GST, 1404, 0, 1404)
AS_LIBTOOL(GST, 1405, 0, 1405)
dnl *** required versions of GStreamer stuff ***
GST_REQ=1.14.4
GST_REQ=1.14.5
dnl *** autotools stuff ****
......
......@@ -34,6 +34,16 @@ A wide range of video and audio decoders, encoders, and filters are included.
</GitRepository>
</repository>
<release>
<Version>
<revision>1.14.5</revision>
<branch>1.14</branch>
<name></name>
<created>2019-05-29</created>
<file-release rdf:resource="https://gstreamer.freedesktop.org/src/gst-plugins-base/gst-plugins-base-1.14.5.tar.xz" />
</Version>
</release>
<release>
<Version>
<revision>1.14.4</revision>
......
project('gst-plugins-base', 'c',
version : '1.14.4',
version : '1.14.5',
meson_version : '>= 0.40.1',
default_options : [ 'warning_level=1',
'buildtype=debugoptimized' ])
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment