Commit 03420d1e authored by Sebastian Dröge's avatar Sebastian Dröge 🍵

Release 1.1.4

parent f88488cd
=== release 1.1.4 ===
2013-08-28 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
releasing 1.1.4
2013-08-28 12:33:17 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* po/pt_BR.po:
po: update translations
2013-08-28 11:13:14 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst-libs/gst/mpegts/mpegts.h:
mpegts: mark as unstable API
2013-08-27 17:05:44 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst/mpegtsdemux/mpegtspacketizer.c:
mpegtsdemux: fix possible read beyond end of buffer when resyncing
2013-08-27 11:27:04 +0100 Matthieu Bouron <matthieu.bouron@collabora.com>
* gst/videoparsers/gsth264parse.c:
h264parse: only update src CAPS when it's necessary
https://bugzilla.gnome.org/show_bug.cgi?id=705452
2013-08-20 11:59:34 +0100 Matthieu Bouron <matthieu.bouron@collabora.com>
* gst/videoparsers/gsth264parse.c:
h264parse: do not set CAPS and passthrough mode if SPS/PPS have not been parsed
https://bugzilla.gnome.org/show_bug.cgi?id=705452
2013-08-26 13:48:02 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* configure.ac:
configure.ac: Don't set BZ2_LIBS if bz2 is not found
2013-08-26 10:22:06 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* ext/webp/gstwebpdec.c:
webpdec: Some cleanup and minor fixes
2013-08-24 00:46:38 +0300 Sreerenj Balachandran <sreerenj.balachandran@intel.com>
* configure.ac:
* ext/Makefile.am:
* ext/webp/Makefile.am:
* ext/webp/gstwebp.c:
* ext/webp/gstwebpdec.c:
* ext/webp/gstwebpdec.h:
webp: Add WebP image decoder plugin
https://bugzilla.gnome.org/show_bug.cgi?id=706285
2012-09-01 20:46:43 +0200 Nicola Murino <nicola.murino@gmail.com>
* ext/opencv/gstfacedetect.c:
* ext/opencv/gstfacedetect.h:
facedetect: new property to control bus messages updates
https://bugzilla.gnome.org/show_bug.cgi?id=655622
2013-08-23 12:01:32 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* ext/opencv/gstopencvutils.c:
* ext/opencv/gstsegmentation.cpp:
opencv: Fix indention
2013-08-23 12:01:07 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* ext/opencv/gstdisparity.cpp:
* ext/opencv/gstdisparity.h:
opencv: Port to non-deprecated GMutex/GCond API
2013-08-23 11:38:04 +0200 Miguel Casas-Sanchez <miguelecasassanchez@gmail.com>
* ext/opencv/Makefile.am:
* ext/opencv/gstdisparity.cpp:
* ext/opencv/gstdisparity.h:
* ext/opencv/gstopencv.c:
opencv: Add disparity-map calculation element
https://bugzilla.gnome.org/show_bug.cgi?id=704760
2013-08-22 17:32:17 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* sys/directsound/gstdirectsoundsrc.c:
directsoundsrc: Remove unused variable
2013-08-22 16:07:58 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* configure.ac:
configure: Update opencv dependency, 2.4.5 works too.
2013-08-22 13:45:59 +0200 Kishore Arepalli <kishore.arepalli@gmail.com>
* sys/directsound/gstdirectsoundsrc.c:
* sys/directsound/gstdirectsoundsrc.h:
directsoundsrc: Add 'device-name' property for selecting a audio device
https://bugzilla.gnome.org/show_bug.cgi?id=706574
2013-08-22 14:56:05 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* configure.ac:
configure: Fix bz2 configure check for Windows
Due to function decorations on Windows AC_CHECK_LIB can't be used to check for bz2.
https://bugzilla.gnome.org/show_bug.cgi?id=465924
2013-08-21 14:44:38 +0200 Edward Hervey <edward@collabora.com>
* gst/mpegtsdemux/tsdemux.c:
tsdemux: Refuse negative rates which we don't support yet
And remove a check which was done before
2013-03-10 17:02:18 +0100 Jesper Larsen <jesper.larsen@ixonos.com>
* gst/mpegtsmux/mpegtsmux.c:
* gst/mpegtsmux/tsmux/tsmux.c:
* gst/mpegtsmux/tsmux/tsmux.h:
mpegtsmux: Set the program number from prog-map
The prog-map property of mpegtsmux only allows you to group pids together in a program.
The program number set in the PAT/PMT tables cannot be set explicitly.
This patch will set the program number according to the prog-map.
If a program id of 0 is given, the first vacant program number starting from 1 will be used.
https://bugzilla.gnome.org/show_bug.cgi?id=697239
2013-08-21 08:58:52 +0200 Edward Hervey <edward@collabora.com>
* sys/dvb/camutils.c:
* sys/dvb/dvbbasebin.c:
dvb: Adapt for latest mpegts lib changes
2013-08-21 08:58:23 +0200 Edward Hervey <edward@collabora.com>
* gst/mpegtsdemux/mpegtsbase.c:
* gst/mpegtsdemux/mpegtsbase.h:
mpegtsbase: Adapt for latest mpegts lib changes
2013-08-21 08:40:16 +0200 Edward Hervey <edward@collabora.com>
* gst-libs/gst/mpegts/gst-dvb-descriptor.c:
* gst-libs/gst/mpegts/gst-dvb-section.c:
* gst-libs/gst/mpegts/gst-dvb-section.h:
* gst-libs/gst/mpegts/gstmpegtsdescriptor.c:
* gst-libs/gst/mpegts/gstmpegtsdescriptor.h:
* gst-libs/gst/mpegts/gstmpegtssection.c:
* gst-libs/gst/mpegts/gstmpegtssection.h:
* tests/examples/mpegts/ts-parser.c:
mpegts: ABI/API break: Use GPtrArray instead of GArray
While it was a great idea, various g-i based bindings don't support
GArray with entries greater than sizeof(gpointer) :(
So let's just make everybody happy by just using GPtrArray.
And since we're breaking the API, also rename the various descriptor fields
to no longer have the descriptor_ prefix.
It does cost a bit more in terms of memory/cpu usage, but makes it usable
from bindings.
2013-08-19 15:31:51 -0400 Robert Krakora <rob.krakora@messagenetsystems.com>
* sys/uvch264/gstuvch264_mjpgdemux.c:
uvch264src: don't error out on incomplete aux data segment
It appears that the Logitech C920 sometimes drops the next
to last segment of RAW aux data contained within the MJPEG
container. H264 data that is multiplexed with in the same
container does not appear to be affected. This appears to
be a bug in the Logitech C920 firmware and uvch264src should
not error out in this case.
Sometimes it can take 24 hours of continuous streaming for
the problem to occur, but sometimes it takes only a couple
of hours.
https://bugzilla.gnome.org/show_bug.cgi?id=706276
2013-08-20 16:01:47 +0200 Edward Hervey <edward@collabora.com>
* gst/ivtc/gstivtc.c:
ivtc: Use input framerate when possible
if input is 30000/1001 ... use 24000/1001 as the output fixated framerate
2013-08-15 11:45:34 +0100 Matthieu Bouron <matthieu.bouron@collabora.com>
* gst/id3tag/id3tag.c:
id3mux: handle publisher, interpreted-by and musical-key tags
https://bugzilla.gnome.org/show_bug.cgi?id=705999
2013-08-20 13:29:14 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* gst/videoparsers/gstmpegvideoparse.c:
mpegvideoparse: Fix switch statement in level detection code
Properly fall through the cases without re-assigning the level to
the wrong value.
https://bugzilla.gnome.org/show_bug.cgi?id=706369
2013-08-19 17:23:28 +0200 Edward Hervey <edward@collabora.com>
* gst/jpegformat/gstjpegparse.c:
jpegparse: Forward segment event after caps
Store it until we know what our caps are.
2013-08-20 00:26:06 +0100 Tim-Philipp Müller <tim@centricular.net>
* tests/check/elements/aiffparse.c:
test: fix compiler warning in aiffparse test on 32-bit x86
2013-08-19 09:25:20 +0000 Matthieu Bouron <matthieu.bouron@collabora.com>
* tests/check/elements/aiffparse.c:
aiffparse: fix copyright
2013-08-17 00:22:44 +0100 Tim-Philipp Müller <tim@centricular.net>
* tests/check/elements/aiffparse.c:
tests: fix some leaks in aiffparse unit test
2013-08-17 00:09:18 +0100 Tim-Philipp Müller <tim@centricular.net>
* tests/check/elements/aiffparse.c:
tests: fix state change order in aiffparse test
Do state changes from sink to src. Fixes race condition in
pull mode test where the source will start up and push buffers
to queue/identity or aiffparse before the main thread has
managed to set them to playing yet.
2013-08-12 18:33:39 +0100 Matthieu Bouron <matthieu.bouron@collabora.com>
* tests/check/Makefile.am:
* tests/check/elements/aiffparse.c:
* tests/files/Makefile.am:
* tests/files/s16be-id3v2.aiff:
aiffparse: add tests
https://bugzilla.gnome.org/show_bug.cgi?id=705993
2013-08-17 00:23:08 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst/aiff/aiffparse.c:
aiffparse: don't leak adapter
2013-08-15 13:58:48 +0100 Matthieu Bouron <matthieu.bouron@collabora.com>
* gst/aiff/aiffparse.c:
aiffparse: s/newsegment/segment/
https://bugzilla.gnome.org/show_bug.cgi?id=705993
2013-08-13 18:42:55 +0100 Matthieu Bouron <matthieu.bouron@collabora.com>
* gst/aiff/aiffparse.c:
aiffparse: fix push mode
Fix push mode by handling sink events (CAPS, SEGMENT) properly.
https://bugzilla.gnome.org/show_bug.cgi?id=705993
2013-08-16 15:41:48 -0400 Olivier Crête <olivier.crete@collabora.com>
* gst/videoparsers/gstmpeg4videoparse.c:
mpeg4videoparse: Reparse the config if the size changed
Also only re-issue the caps update if the part of the config that
changed is one we care about.
2013-08-16 19:48:03 +0100 Tim-Philipp Müller <tim@centricular.net>
* ext/srtp/gstsrtpdec.c:
srtpdec: fix buffers being dropped due to shadowed variable
Spotted by gstblub@gmail.com.
https://bugzilla.gnome.org/show_bug.cgi?id=706091
2013-08-08 11:19:00 +0100 Chris Bass <floobleflam@gmail.com>
* ext/dash/gstmpdparser.c:
dashdemux: offset segment numbers by startNumber
For SegmentTemplate elements containing a startNumber attribute, the
`number' member of GstMediaSegments should be offset by the value of
startNumber; however, this is not currently the case. As a result, the
first URI(s) requested by the download loop will be wrong.
This commit ensures that segment numbers will be offset by startNumber
when one is present in a SegmentTemplate element.
https://bugzilla.gnome.org/show_bug.cgi?id=705661
2013-08-08 15:19:15 +0100 Chris Bass <floobleflam@gmail.com>
* ext/dash/gstmpdparser.c:
dashdemux: remove incorrect timestamp scaling.
When using a SegmentTemplate element, the timestamps of the buffers
output by dashdemux are incorrect, causing problems downstream.
The reason is that GstMediaSegment start times are calculated (in
gst_mpdparser_get_chunk_by_index) by multiplying segment index by
segment duration and then scaling the result according the `timebase'
attribute from the MPD. However, the segment duration is already a
GstClockTime (i.e., it has already been scaled according to the timebase
from the MPD and converted to a nanosecond value), so multiplying it by
the segment index will give the correct timestamp without the need for
any further scaling.
https://bugzilla.gnome.org/show_bug.cgi?id=705679
2013-08-15 20:12:42 +0100 Tim-Philipp Müller <tim@centricular.net>
* tests/examples/stats/Makefile.am:
* tests/examples/stats/mp2ogg.c:
examples: remove another obsolete example
2013-08-15 15:46:58 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* ext/daala/gstdaaladec.c:
* ext/daala/gstdaalaenc.c:
* ext/openjpeg/gstopenjpegdec.c:
* ext/openjpeg/gstopenjpegenc.c:
* ext/rsvg/gstrsvgdec.c:
* ext/rsvg/gstrsvgdec.h:
* ext/schroedinger/gstschrodec.c:
* sys/androidmedia/gstamcvideodec.c:
* sys/mfc/gstmfcdec.c:
* sys/vdpau/h264/gstvdph264dec.c:
* sys/vdpau/mpeg/gstvdpmpegdec.c:
ext: Use new flush vfunc of video codec base classes and remove reset implementations
2013-08-14 19:12:16 +0100 Tim-Philipp Müller <tim@centricular.net>
* tests/examples/capsfilter/Makefile.am:
* tests/examples/capsfilter/capsfilter1.c:
* tests/examples/gstplay/.gitignore:
* tests/examples/gstplay/Makefile.am:
* tests/examples/gstplay/player.c:
* tests/examples/indexing/.gitignore:
* tests/examples/indexing/Makefile.am:
* tests/examples/indexing/indexmpeg.c:
* tests/examples/level/Makefile.am:
* tests/examples/level/README:
* tests/examples/level/demo.c:
* tests/examples/level/plot.c:
examples: remove prehistoric examples
2013-08-14 18:17:51 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst/inter/gstinteraudiosrc.c:
* gst/inter/gstinteraudiosrc.h:
interaudiosrc: make silence memory actually contain silence
instead of random data. Reported by Marco Micheletti on
gstreamer-devel.
2013-08-14 13:27:03 +0100 Tim-Philipp Müller <tim@centricular.net>
* sys/dvb/dvbbasebin.c:
dvbbasebin: fix criticals when trying to cast a GstPad to a GstElement
message->src might be a GstPad. Observed during gst-inspect-1.0 -a
2013-08-14 13:59:27 +0200 Edward Hervey <edward@collabora.com>
* .gitignore:
* gst-libs/gst/mpegts/.gitignore:
.gitignore: Update for new files to ignore
2013-08-14 13:41:37 +0200 Edward Hervey <edward@collabora.com>
* gst/mpegtsdemux/pesparse.c:
* gst/mpegtsdemux/pesparse.h:
pesparse: Refactory secondary PES extension handling
Some streams had wrong values for the stream_id_extension, make sure
we only remember the valid ones.
For streams with PES_extension_field_length == 0, assume there's nothing
else.
For streams that state they have a TREF extension but don't have enough
data to store it, just assume it was produced by a non-compliant muxer
and skip the remaining data.
Only store remaining data in stream_id_extension_data instead of storing
data we already parse.
2013-08-14 10:47:31 +0200 Zaheer Abbas Merali <zaheermerali@gmail.com>
* gst/pcapparse/gstpcapparse.c:
pcapparse: Remove unneeded unref and only set pad caps if we have caps
Fixes crashes due to invalid unrefs.
https://bugzilla.gnome.org/show_bug.cgi?id=705957
2013-08-14 10:39:46 +0200 Edward Hervey <edward@collabora.com>
* gst/mpegtsdemux/pesparse.c:
pesparse: Fix pes extension data length check
And remove length/data updates (we use the header size just below to
properly set them).
Based on feedback from Stas Sergeev <stsp@list.ru>
https://bugzilla.gnome.org/show_bug.cgi?id=657343
2013-08-14 10:33:14 +0200 Edward Hervey <edward@collabora.com>
* gst/mpegtsdemux/pesparse.c:
* gst/mpegtsdemux/pesparse.h:
* gst/mpegtsdemux/tsdemux.c:
pesparse: Remove unused argument
We always provided 0 as the offset and never used the returned value.
Based on feedback from Stas Sergeev <stsp@list.ru>
https://bugzilla.gnome.org/show_bug.cgi?id=657343
2013-08-13 17:47:14 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst-libs/gst/codecparsers/gstmpegvideoparser.c:
codecparsers: mpegvideoparse: turn internal consistency check into a g_assert()
We only check input from the API user with g_return_*_if_fail().
Internal sanity checks should use g_assert() instead, which is
disabled by default for releases.
2013-08-13 17:45:51 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst-libs/gst/codecparsers/gstmpegvideoparser.c:
* gst-libs/gst/codecparsers/gstmpegvideoparser.h:
codecparsers: mpegvideoparser: minor doc fixes
2013-08-13 12:41:28 -0300 Thiago Santos <thiago.sousa.santos@collabora.com>
* ext/smoothstreaming/gstmssdemux.c:
mssdemux: use gst_data_queue_push_force for adding events to queue
This prevents locking on startup when a stream only has a single buffer
for one of the streams and mssdemux decides to push an EOS event right
after it.
2013-08-08 13:32:02 -0300 Thiago Santos <thiago.sousa.santos@collabora.com>
* ext/dash/gstdashdemux.c:
dashdemux: use push_force when adding events to the dataqueue
This prevents deadlocks on startup on files that have only a very
large buffer for a stream and the queue is filled and will lock on
the eos event that is pushed after the buffer. As no buffers have yet
been pushed to other streams, the pipeline locks on preroll
2013-07-30 15:17:23 +0200 Matej Knopp <matej.knopp@gmail.com>
* gst/videoparsers/gstmpegvideoparse.c:
mpegvideoparse: support field encoding for interlaced video
https://bugzilla.gnome.org/show_bug.cgi?id=705144
2013-08-12 01:02:51 -0400 Alexandre Rostovtsev <tetromino@gentoo.org>
* configure.ac:
neonhttpsrc: allow building with neon-0.30
https://bugzilla.gnome.org/show_bug.cgi?id=705812
2013-08-12 12:27:33 -0400 Olivier Crête <olivier.crete@collabora.com>
* ext/srtp/gstsrtpdec.c:
* ext/srtp/gstsrtpenc.c:
srtp: Let packets through without touching them if no crypto or auth is set
2013-08-12 12:27:16 -0400 Olivier Crête <olivier.crete@collabora.com>
* ext/srtp/gstsrtpdec.c:
srtpdec: Refactor code a bit
Simplify the error handling case and get the packet push out of the if()
2013-08-12 11:56:27 -0400 Olivier Crête <olivier.crete@collabora.com>
* ext/srtp/gstsrtpdec.c:
srtpdec: Don't error on invalid packet, just drop it
2013-08-07 15:01:33 +0300 Sreerenj Balachandran <sreerenj.balachandran@intel.com>
* gst/videoparsers/gstvc1parse.c:
vc1parse: Fix the SequenceLayer handling for advanced profile.
The Sequence Header Data Structure STRUCT_C for Advanced Profile
has only a one valid field which is the profile indicator. Don't
use the reserved fields for fps update like Simple/Main profile.
https://bugzilla.gnome.org/show_bug.cgi?id=705667
2013-08-07 14:52:43 +0300 Sreerenj Balachandran <sreerenj.balachandran@intel.com>
* gst/videoparsers/gstvc1parse.c:
vc1parse: Fix seq hdr STRUCT_A handling for advanced profile.
The Sequence Header Data Structure STRUCT_A for advanced profile
may be eight consecutive zero bytes.Don't try to override the
width and height values in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=705667
2013-08-07 10:14:20 +0100 Matthieu Bouron <matthieu.bouron@collabora.com>
* gst/aiff/aiffparse.c:
aiffparse: fix SSND data size
AIFF chunk size does not include the chunk header size (8 bytes), so the
SSND data size is equal to the chunk size minus the SSND header size (8
bytes).
https://bugzilla.gnome.org/show_bug.cgi?id=705675
2013-07-13 02:50:52 +0200 Andoni Morales Alastruey <ylatuya@gmail.com>
* ext/hls/gsthlsdemux.c:
hlsdemux: add support for redirections
2013-08-02 20:37:30 +0200 Arnaud Vrac <avrac@freebox.fr>
* gst/mpegdemux/Makefile.am:
* gst/mpegdemux/gstmpegdemux.c:
mpegdemux: send codec tag for each stream
2013-08-10 21:34:10 +0100 Tim-Philipp Müller <tim@centricular.net>
* tests/check/elements/uvch264demux.c:
tests: uvch264demux: send stream-start events and fix event order
2013-08-10 21:33:36 +0100 Tim-Philipp Müller <tim@centricular.net>
* sys/uvch264/gstuvch264_mjpgdemux.c:
uvch264mjpgdemux: fix event ordering
2013-08-10 20:02:01 +0100 Tim-Philipp Müller <tim@centricular.net>
* tests/check/elements/mplex.c:
tests: mplex: fix 'Got data flow before stream-start event' failure
2013-08-10 19:54:57 +0100 Tim-Philipp Müller <tim@centricular.net>
* tests/check/elements/mpeg2enc.c:
tests: mpeg2enc: fix 'Got data flow before stream-start event' failure
2013-08-10 19:44:15 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst/aiff/aiffparse.c:
aiffparse: fix CAPS query
Was causing criticals in decodebin/playbin because the caps
query done when exposing pads would return ANY caps.
2013-08-10 19:43:41 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst/aiff/aiffparse.c:
aiffparse: don't unref NULL buffer
2013-08-07 19:08:33 +0100 Matthieu Bouron <matthieu.bouron@collabora.com>
* gst/aiff/aiffparse.c:
aiffparse: set missing layout field in srcpad caps
https://bugzilla.gnome.org/show_bug.cgi?id=705674
2013-08-07 17:28:29 +0100 Matthieu Bouron <matthieu.bouron@collabora.com>
* gst/aiff/aiffparse.c:
aiffparse: send start stream event
https://bugzilla.gnome.org/show_bug.cgi?id=705674
2013-08-06 16:53:37 +0100 Matthieu Bouron <matthieu.bouron@collabora.com>
* gst/aiff/aiffparse.c:
aiffparse: fix buffers initialisation
https://bugzilla.gnome.org/show_bug.cgi?id=705674
2013-08-02 14:11:01 +0200 Lubosz Sarnecki <lubosz@gmail.com>
* configure.ac:
build: add subdir-objects to AM_INIT_AUTOMAKE
Fixes warnings with automake 1.14.
https://bugzilla.gnome.org/show_bug.cgi?id=705350
2013-08-09 20:12:09 +0100 David Schleef <ds@schleef.org>
* configure.ac:
* tests/check/Makefile.am:
tests: create/remove orc directory at proper time
Before automake creates .deps directories, and during distclean.
https://bugzilla.gnome.org/show_bug.cgi?id=705350
2013-08-09 20:10:35 +0100 Tim-Philipp Müller <tim@centricular.net>
* tests/check/Makefile.am:
* tests/check/elements/baseaudiovisualizer.c:
tests: fix build of baseaudiovisualizer test with subdir-objects option
https://bugzilla.gnome.org/show_bug.cgi?id=705350
2013-08-07 09:04:39 +0200 Edward Hervey <bilboed@bilboed.com>
* gst/videoparsers/gsth264parse.c:
h264parse: Use slice type to determine if frame is keyframe
This is the same behaviour as pre-baseparse-refactoring
https://bugzilla.gnome.org/show_bug.cgi?id=705598
2013-08-03 14:20:47 +0200 Edward Hervey <edward@collabora.com>
* gst/videoparsers/gsth264parse.c:
h264parse: Do not trigger caps update if we only have PPS updates
Updating caps results in downstream elements potentially reconfiguring themselves
(such as decoders). If we do this in the middle of keyframes, we would result
in those elements being reconfigured and handling garbage until the next keyframe.
Instead of this only send (potentially) new codec_data when we have *both* SPS and
PPS.
https://bugzilla.gnome.org/show_bug.cgi?id=705333
2013-07-31 11:56:39 -0700 David Schleef <ds@schleef.org>
* gst/ivtc/gstivtc.c:
ivtc: quiet FIXME when it's not relevant
2013-07-31 11:54:06 -0700 David Schleef <ds@schleef.org>
* gst/ivtc/gstivtc.c:
ivtc: implement new edge-directed upsampling
2013-08-03 18:07:30 +0100 Tim-Philipp Müller <tim@centricular.net>
* sys/dvb/gstdvbsrc.c:
dvbsrc: remove use of _XOPEN_SOURCE
Which causes problems when used with _GNU_SOURCE apparently, and it
seems it was only set because of usleep(), which we can just replace
with g_usleep() until we get rid of those entirely.
https://bugzilla.gnome.org/show_bug.cgi?id=705208
2013-08-02 15:12:17 +0200 Bernhard Miller <bernhard.miller@streamunlimited.com>
* sys/bluez/gstavdtpsrc.c:
bluez: return GST_FLOW_EOS in avdtpsrc create when stream is EOF
Signed-off-by: Bernhard Miller <bernhard.miller@streamunlimited.com>
https://bugzilla.gnome.org/show_bug.cgi?id=705349
2013-08-01 11:01:03 +0200 Edward Hervey <edward@collabora.com>
* gst/mpegtsdemux/mpegtspacketizer.c:
mpegtspacketizer: Look harder for next sync position
If ever we lose sync, we were just checking for the next 0x47 marker ...
which might actually happen within a mpeg-ts packet.
Instead check for 3 repeating 0x47 at the expected packet size interval,
which the same logic we use when we initially look for the packet size.
2013-08-01 10:58:23 +0200 Edward Hervey <edward@collabora.com>
* gst/mpegtsdemux/mpegtspacketizer.c:
mpegtspacketizer: Fix PCR LUT table
We were only resetting the first 512 values of the lookup table instead
of the whole 8192.
This resulted in any PCR PID over 0x0200 ... ending up taking the first PCR
table around :(
2013-07-30 22:06:38 -0300 Thiago Santos <thiago.sousa.santos@collabora.com>
* ext/dash/gstdashdemux.c:
dashdemux: properly error out when manifest has no streams
Post an error message when the manifest is parsed and no valid streams
are found be activated and used.
Fixes #704308
2013-07-30 16:08:17 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst/mpegtsdemux/tsdemux.c:
* gst/mpegtsmux/mpegtsmux.c:
mpegts: private/teletext -> application/x-teletext
2013-07-29 21:25:14 +0100 Tim-Philipp Müller <tim@centricular.net>
* win32/common/config.h:
win32: update
2013-07-29 21:24:51 +0100 Tim-Philipp Müller <tim@centricular.net>
* .gitignore:
tests: ignore new example binaries
2013-07-29 21:23:48 +0100 Tim-Philipp Müller <tim@centricular.net>
* po/LINGUAS:
* po/el.po:
* po/hr.po:
* po/hu.po:
* po/nb.po:
* po/nl.po:
* po/sv.po:
* po/vi.po:
po: update translations
2013-07-29 14:48:02 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* configure.ac:
Back to development
=== release 1.1.3 ===
2013-07-29 Sebastian Dröge <sebastian.droege@collabora.co.uk>
2013-07-29 13:52:29 +0200 Sebastian Dröge <slomo@circular-chaos.org>
* ChangeLog:
* NEWS:
* RELEASE:
* configure.ac:
releasing 1.1.3
* docs/plugins/gst-plugins-bad-plugins.args:
* docs/plugins/gst-plugins-bad-plugins.hierarchy:
* docs/plugins/gst-plugins-bad-plugins.interfaces:
* docs/plugins/inspect/plugin-accurip.xml:
* docs/plugins/inspect/plugin-adpcmdec.xml:
* docs/plugins/inspect/plugin-adpcmenc.xml:
* docs/plugins/inspect/plugin-asfmux.xml:
* docs/plugins/inspect/plugin-assrender.xml:
* docs/plugins/inspect/plugin-audiovisualizers.xml:
* docs/plugins/inspect/plugin-autoconvert.xml:
* docs/plugins/inspect/plugin-bayer.xml:
* docs/plugins/inspect/plugin-bz2.xml:
* docs/plugins/inspect/plugin-camerabin.xml:
* docs/plugins/inspect/plugin-chromaprint.xml:
* docs/plugins/inspect/plugin-coloreffects.xml:
* docs/plugins/inspect/plugin-curl.xml:
* docs/plugins/inspect/plugin-dataurisrc.xml:
* docs/plugins/inspect/plugin-debugutilsbad.xml:
* docs/plugins/inspect/plugin-dtsdec.xml:
* docs/plugins/inspect/plugin-dvb.xml:
* docs/plugins/inspect/plugin-dvbsuboverlay.xml:
* docs/plugins/inspect/plugin-dvdspu.xml:
* docs/plugins/inspect/plugin-eglglessink.xml:
* docs/plugins/inspect/plugin-faac.xml:
* docs/plugins/inspect/plugin-faad.xml:
* docs/plugins/inspect/plugin-festival.xml:
* docs/plugins/inspect/plugin-fieldanalysis.xml:
* docs/plugins/inspect/plugin-flite.xml:
* docs/plugins/inspect/plugin-fragmented.xml:
* docs/plugins/inspect/plugin-frei0r.xml:
* docs/plugins/inspect/plugin-gaudieffects.xml:
* docs/plugins/inspect/plugin-gdp.xml:
* docs/plugins/inspect/plugin-geometrictransform.xml:
* docs/plugins/inspect/plugin-gmedec.xml:
* docs/plugins/inspect/plugin-gsm.xml:
* docs/plugins/inspect/plugin-gstsiren.xml:
* docs/plugins/inspect/plugin-id3tag.xml:
* docs/plugins/inspect/plugin-inter.xml:
* docs/plugins/inspect/plugin-interlace.xml: