Commit 16887472 authored by Tim-Philipp Müller's avatar Tim-Philipp Müller 🐠

Release 0.11.94

parent 3ca45b8c
2012-09-13 09:36:14 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.co.uk>
* ext/libav/gstavviddec.c:
viddec: Set latency base on the number of bframes
2012-09-13 09:34:29 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.co.uk>
* ext/libav/gstavviddec.c:
viddec: Cleanup unused has_b_frames flag
2012-09-12 15:30:05 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* ext/libav/gstavcodecmap.c:
* ext/libav/gstavutils.c:
* ext/libav/gstavutils.h:
* ext/libav/gstavviddec.c:
* ext/libav/gstavvidenc.c:
libav: Switch to non-deprecated symbols
This symbols/enums will all be deprecated in the next releases
2012-09-12 21:15:24 +0200 Stefan Sauer <ensonic@users.sf.net>
* ext/libav/gstavmux.c:
collectpads: remove gst_collect_pads_add_pad_full
Rename gst_collect_pads_add_pad_full() to gst_collect_pads_add_pad() and fix all
invocations.
2012-09-12 10:25:24 +0200 Michael Smith <msmith@rdio.com>
* ext/libav/gstavcodecmap.c:
libav: add decode support for prores
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=683840
2012-09-12 10:25:21 +0200 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* ext/libav/gstavdemux.c:
* ext/libav/gstavpipe.h:
avdemux: port to the new GLib thread API
2012-09-11 20:40:07 +0200 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* configure.ac:
configure.ac: handle out-of-tree build
In file included from <gst-ffmpeg>/gst-libs/ext/libav/libavutil/avutil.h:318:0,
from <gst-ffmpeg>/gst-libs/ext/libav/libswscale/swscale.h:30,
from <gst-ffmpeg>/ext/libswscale/gstffmpegscale.c:26:
<gst-ffmpeg>/gst-libs/ext/libav/libavutil/common.h:38:32: fatal error: libavutil/avconfig.h: No such file or directory
compilation terminated.
2012-09-11 17:52:57 +0200 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* ext/libav/gstavdemux.c:
avdemux: only activate in pull mode if upstream is seekable
2012-09-11 13:27:55 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* configure.ac:
configure: actually check for orc
Otherwise we get a scary "orc acceleration disabled, orc
not found or too old" message at the end of the configure
output. It's used by libswscale.
2012-09-11 13:53:23 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/libav/gstavviddec.c:
avviddec: add support for codecs that use reget_buffer
Add support for codec that use reget_buffer. In this mode, it reuses the picture
and we need to attach the corresponding input frame to it or else we get the
timestamps wrong.
2012-09-10 17:53:54 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* configure.ac:
* ext/Makefile.am:
* ext/ffmpeg/Makefile.am:
* ext/ffmpeg/gstffmpeg.c:
* ext/ffmpeg/gstffmpeg.h:
* ext/ffmpeg/gstffmpegaudioresample.c:
* ext/ffmpeg/gstffmpegcfg.c:
* ext/ffmpeg/gstffmpegcfg.h:
* ext/ffmpeg/gstffmpegcodecmap.c:
* ext/ffmpeg/gstffmpegcodecmap.h:
* ext/ffmpeg/gstffmpegdec.c:
* ext/ffmpeg/gstffmpegdeinterlace.c:
* ext/ffmpeg/gstffmpegdemux.c:
* ext/ffmpeg/gstffmpegenc.c:
* ext/ffmpeg/gstffmpegenc.h:
* ext/ffmpeg/gstffmpegmux.c:
* ext/ffmpeg/gstffmpegpipe.h:
* ext/ffmpeg/gstffmpegprotocol.c:
* ext/ffmpeg/gstffmpegscale.c:
* ext/ffmpeg/gstffmpegutils.c:
* ext/ffmpeg/gstffmpegutils.h:
* ext/ffmpeg/gstffmpegviddec.c:
* ext/ffmpeg/gstffmpegvidenc.c:
* ext/ffmpeg/gstffmpegvidenc.h:
* ext/libav/Makefile.am:
* ext/libav/gstav.c:
* ext/libav/gstav.h:
* ext/libav/gstavaudioresample.c:
* ext/libav/gstavcfg.c:
* ext/libav/gstavcfg.h:
* ext/libav/gstavcodecmap.c:
* ext/libav/gstavcodecmap.h:
* ext/libav/gstavdec.c:
* ext/libav/gstavdeinterlace.c:
* ext/libav/gstavdemux.c:
* ext/libav/gstavenc.c:
* ext/libav/gstavenc.h:
* ext/libav/gstavmux.c:
* ext/libav/gstavpipe.h:
* ext/libav/gstavprotocol.c:
* ext/libav/gstavscale.c:
* ext/libav/gstavutils.c:
* ext/libav/gstavutils.h:
* ext/libav/gstavviddec.c:
* ext/libav/gstavvidenc.c:
* ext/libav/gstavvidenc.h:
ext: ffmpeg/gstffmpeg*.[ch] => libav/gstav*.[ch]
2012-09-10 17:29:35 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* configure.ac:
configure: Fix name of binary to disable
2012-09-10 17:18:30 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* configure.ac:
* ext/Makefile.am:
* ext/libpostproc/Makefile.am:
* ext/libpostproc/gstpostproc.c:
* tests/check/.gitignore:
* tests/check/Makefile.am:
* tests/check/elements/postproc.c:
remove postproc element
libpostproc is gone from upstream libav.
2012-09-10 17:08:00 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* configure.ac:
* ext/ffmpeg/gstffmpeg.c:
* ext/ffmpeg/gstffmpeg.h:
* ext/ffmpeg/gstffmpegaudioresample.c:
* ext/ffmpeg/gstffmpegcodecmap.c:
* ext/ffmpeg/gstffmpegcodecmap.h:
* ext/ffmpeg/gstffmpegdec.c:
* ext/ffmpeg/gstffmpegdeinterlace.c:
* ext/ffmpeg/gstffmpegdemux.c:
* ext/ffmpeg/gstffmpegenc.c:
* ext/ffmpeg/gstffmpegmux.c:
* ext/ffmpeg/gstffmpegprotocol.c:
* ext/ffmpeg/gstffmpegscale.c:
* ext/ffmpeg/gstffmpegutils.h:
* ext/ffmpeg/gstffmpegviddec.c:
* ext/ffmpeg/gstffmpegvidenc.c:
* ext/libpostproc/gstpostproc.c:
* ext/libswscale/gstffmpegscale.c:
configure.ac: Import top-level include directory
And fixup all includes
2012-09-10 11:17:11 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* ext/ffmpeg/gstffmpegdemux.c:
avdemux: Really ignore demuxers we want to ignore
2012-09-07 17:56:43 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* ext/ffmpeg/gstffmpegviddec.c:
viddec: blacklist *crystalhd* decoder wrappers
There are gstreamer crystalhd elements as well,
so shouldn't be a big loss.
https://bugzilla.gnome.org/show_bug.cgi?id=683435
2012-08-26 18:17:17 +0200 Sjoerd Simons <sjoerd@luon.net>
* ext/ffmpeg/gstffmpegenc.c:
ffmpegenc: Don't try to set caps to NULL
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=682736
2012-08-22 13:31:46 +0200 Stefan Sauer <ensonic@users.sf.net>
* common:
Automatic update of common submodule
From 668acee to 4f962f7
2012-08-22 13:20:36 +0200 Stefan Sauer <ensonic@users.sf.net>
* configure.ac:
configure: bump gtk-doc req to 1.12 (mar-2009)
This allows us to e.g. unconditionally use gtkdoc-rebase.
2012-08-10 17:03:26 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/ffmpeg/gstffmpegviddec.c:
viddec: use the right pointers
Use the plane pointers and strides.
Improve some debug
2012-08-08 16:32:52 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* configure.ac:
Back to development
=== release 0.11.93 ===
2012-08-08 16:32:16 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* configure.ac:
* gst-libav.doap:
Release 0.11.93
2012-08-08 15:59:59 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/ffmpeg/gstffmpegviddec.c:
avviddec: Properly align and pad buffers for libav
https://bugzilla.gnome.org/show_bug.cgi?id=680796
2012-08-08 13:11:57 +0100 Tim-Philipp Müller <tim@centricular.net>
* gst-libs/ext/Makefile.am:
Revert "ffmpeg: Fix make dist"
This reverts commit 4964bd753c06dfbf252dff3f520d74e91951ee08.
No idea what this fixes, for me it breaks make dist, which fails
with:
make[2]: Entering directory `/home/tpm/gst/0.11/gst-ffmpeg/gst-libs/ext'
GIT_DIR=libav/.git git checkout-index --prefix=../libav-dist/libav/ -a
touch libav-dist/libav/config.mak
touch: cannot touch `libav-dist/libav/config.mak': No such file or directory
after a clean build.
2012-08-07 10:19:16 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/ffmpeg/gstffmpegcodecmap.c:
av: Use */x-gst-av instead of */x-gst-ff for unknown caps
2012-08-06 14:35:07 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/ffmpeg/gstffmpegdemux.c:
avdemux: Remove unused variable
2012-08-05 18:33:27 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/ffmpeg/gstffmpegdemux.c:
avdemux: Add stream-id to stream-start events
2012-07-26 12:37:01 +0200 Edward Hervey <edward@collabora.com>
* ext/ffmpeg/gstffmpegviddec.c:
ffmpegviddec: Return NOT_NEGOTIATED when not configured
2012-08-05 16:42:26 +0100 Tim-Philipp Müller <tim@centricular.net>
* common:
Automatic update of common submodule
From 94ccf4c to 668acee
2012-08-04 16:19:37 +0100 Tim-Philipp Müller <tim@centricular.net>
* tests/check/.gitignore:
Update .gitignore for ff->av
2012-08-04 16:17:14 +0100 Tim-Philipp Müller <tim@centricular.net>
* ext/ffmpeg/gstffmpegdemux.c:
* tests/check/elements/avdemux_ape.c:
gst_tag_list_free -> gst_tag_list_unref
2012-08-03 13:38:22 +0200 Christian Fredrik Kalager Schaller <uraeus@linuxrisin.org>
* gst-libav.spec.in:
Add spec changelog entry
2012-08-03 13:37:45 +0200 Christian Fredrik Kalager Schaller <uraeus@linuxrisin.org>
* autogen.sh:
* gst-libav.spec.in:
Update spec file and change package name to libav in autogen.sh file
2012-07-28 00:33:51 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/ffmpeg/gstffmpegdemux.c:
tag: Update for taglist/tag event API changes
2012-07-25 11:55:21 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/ffmpeg/gstffmpegcodecmap.c:
avdec: require alignment=au for h264
Because we don't use a parser anymore we need to make sure that we feed the
decoder with full frames. For h264, require that we are aligned on access
units.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=680540
2012-07-23 23:29:26 +0100 Tim-Philipp Müller <tim@centricular.net>
* ext/ffmpeg/gstffmpegenc.c:
audio encoders: use context default bitrate if no bitrate has been set
Fixes 'bitrate too low: got 0, need 24000 or higher'
error when doing audiotstsrc ! avenc_wmav1 ! fakesink
https://bugzilla.gnome.org/show_bug.cgi?id=680487
https://bugzilla.gnome.org/show_bug.cgi?id=680487
2012-07-23 15:02:11 +0200 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* ext/ffmpeg/gstffmpegviddec.c:
ffmpeg: avoid assertion failure on duplicate frame allocation
2012-07-23 11:37:57 +0200 Robert Swain <robert.swain@collabora.co.uk>
* ext/ffmpeg/gstffmpegviddec.c:
ffmpegviddec: Correctly flag interlaced state
If the context interlaced state is indicated, the picture interlaced
state can be used to correctly indicate GST_VIDEO_BUFFER_FLAG_INTERLACED
on output buffers.
2012-07-23 10:40:14 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/ffmpeg/gstffmpegvidenc.c:
ffvidenc: Allocate output buffers with the base class functions
2012-07-23 10:34:23 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/ffmpeg/gstffmpegviddec.c:
ffmpegviddec: Update for video base classes API changes
2012-07-23 08:47:21 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* common:
Automatic update of common submodule
From 98e386f to 94ccf4c
2012-07-18 18:30:53 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* ext/ffmpeg/gstffmpegviddec.c:
viddec: Call gst_video_decoder_negotiate()
2012-07-17 12:33:16 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* ext/ffmpeg/gstffmpegdeinterlace.c:
avdeinterlace: fix up output caps for new field as well
And presumably our output is always progressive and not
interlaced any more?
2012-07-17 12:31:52 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* ext/ffmpeg/gstffmpegdeinterlace.c:
avdeinterlace: detect interlaced input properly
It's not a boolean field any more, and called "interlaced-mode" now.
2012-07-13 14:01:44 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* ext/ffmpeg/gstffmpegdemux.c:
demux: Push STREAM_START when needed
2012-07-10 16:10:14 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/ffmpeg/gstffmpegdec.c:
avdec: ignore AAC errors instead of erroring out
Also ignore decode errors for AAC and carry on decoding like we do for all
other formats.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=679639
2012-07-10 15:47:01 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/ffmpeg/gstffmpegcodecmap.c:
avcodecmap: only restrict caps on encoders
We only want to restrict the channels/rate and width/height on the encoder pads.
For decoders can't assume that the input caps contain channels/rate or
width/height so we need to accept everything.
2012-07-06 11:50:57 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/ffmpeg/gstffmpegvidenc.c:
update for query api changes
2012-07-06 11:27:33 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/ffmpeg/gstffmpegviddec.c:
update for query api changes
2012-07-06 11:03:30 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/ffmpeg/gstffmpegvidenc.c:
update for allocation query changes
2012-07-06 09:49:11 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* ext/ffmpeg/gstffmpegcfg.c:
cfg: remove some deprecated properties: statsfile, mb-qmin, mb-qmax
Use multipass-cache-file, qmin, qmax instead.
2012-07-05 13:20:56 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/ffmpeg/gstffmpegdemux.c:
avdemux: Implement segment-done event
2012-07-03 17:05:17 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/ffmpeg/gstffmpegviddec.c:
avdec: handle_frame should always unref the input frame
Unref the input frame in all cases. Previously it was only unreffed when the
frame was used for output.
When we produce an output frame, take an extra ref because the frame is now
freed elsewhere.
2012-07-03 17:04:49 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/ffmpeg/gstffmpegviddec.c:
avdec: small cleanup
2012-07-03 17:04:03 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/ffmpeg/gstffmpegviddec.c:
avdec: avoid some refs
We can let the ffmpeg structure take ownership of the buffer.
2012-07-02 21:39:02 +0400 Руслан Ижбулатов <lrn1986@gmail.com>
* ext/ffmpeg/gstffmpegvidenc.c:
ffvidenc: Fix a format string to avoid warnings
istffmpegvidenc.c:412:3: error: format '%lu' expects argument of type 'long unsigned int', but argument 8 has type 'gint' [-Werror=format]
2012-07-02 15:50:36 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/ffmpeg/gstffmpegenc.c:
ffaudenc: Fix format string compiler warning
gstffmpegenc.c:266:3: error: format '%lu' expects argument of type 'long unsigned int', but argument 8 has type 'gint'
2012-06-28 09:33:28 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/ffmpeg/gstffmpegviddec.c:
avdec: don't wait for keyframe
Don't wait for a keyframe but try to decode as soon as possible. In most cases,
the demuxer will send a keyframe first and things will work fine, in other
cases, like RTP, we try to decode ASAP to provide quick feedback. Some formats
also have no keyframes (h264 with intra refresh).
2012-06-26 12:36:56 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/ffmpeg/gstffmpegvidenc.c:
avenc: don't leak frames
2012-06-20 12:32:21 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* tests/check/elements/avdec_adpcm.c:
* tests/check/elements/avdemux_ape.c:
update for bus api changes
2012-06-20 10:36:25 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/ffmpeg/gstffmpegdemux.c:
avdemux: update for task api change
2012-06-19 21:41:14 -0400 Matej Knopp <Matej@new-host-5.home>
* ext/ffmpeg/gstffmpegviddec.c:
ffmpegviddec: Don't reopen decoder on same caps, fix memory leaks, only drain on EOS
2012-06-19 12:23:32 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/ffmpeg/gstffmpegviddec.c:
viddec: avoid renegotiation
Keep track of the context veriables and renegotiate when something changes. We
need to use separate values for this because not all values can be copied into a
GstVideoInfo.
Set the output interlacing based on the libav context.
Use the demuxer and decoder framerate to construct an output framerate.
Use demuxer and decoder par to construct an output framerate.
2012-06-15 16:37:19 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/ffmpeg/gstffmpegviddec.c:
ffmpegvidenc: Handle allocation queries and improve the padding/direct-rendering handling
2012-06-15 15:18:47 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/ffmpeg/gstffmpegviddec.c:
ffmpegviddec: Port to 0.11 again
No support for video meta, cropping, etc. yet
2012-06-15 12:28:54 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
Merge remote-tracking branch 'origin/0.10'
2012-06-15 12:19:58 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* ext/ffmpeg/gstffmpegviddec.c:
ffmpegviddec: Properly return if negotiation fails
Instead of crashing ....
2012-06-14 16:29:05 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ext/ffmpeg/gstffmpegvidenc.c:
* ext/ffmpeg/gstffmpegvidenc.h:
ffvidenc: Port to 0.11
2012-06-14 15:44:18 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
Merge remote-tracking branch 'origin/0.10'
2012-06-14 12:41:34 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
Merge remote-tracking branch 'origin/0.10'
Conflicts:
common
ext/ffmpeg/Makefile.am
ext/ffmpeg/gstffmpegcfg.c
ext/ffmpeg/gstffmpegcodecmap.c
ext/ffmpeg/gstffmpegcodecmap.h
ext/ffmpeg/gstffmpegdec.c
ext/ffmpeg/gstffmpegenc.c
ext/ffmpeg/gstffmpegenc.h
tests/check/Makefile.am
Porting of the new video elements to 0.11 still pending.
2012-06-14 15:13:31 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* ext/ffmpeg/gstffmpegviddec.c:
ffmpegviddec: Properly update the interlacing
Fixes #678080
2012-06-14 15:04:33 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* ext/ffmpeg/gstffmpegviddec.c:
ffmpegviddec: Properly error out when codec doesn't open
Avoids ending up using an un-set codec
2012-05-03 19:02:09 +0200 Matej Knopp <matej.knopp@gmail.com>
* ext/ffmpeg/gstffmpegdec.c:
gstffmpegdec: only drain on EOS
See https://bugzilla.gnome.org/show_bug.cgi?id=675359
2012-06-09 16:49:54 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* ext/ffmpeg/gstffmpegenc.c:
avenc: make buffer-size property read-only
Fixes FIXME.
2012-06-09 16:41:28 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* ext/ffmpeg/gstffmpegcfg.c:
* ext/ffmpeg/gstffmpegenc.c:
* ext/ffmpeg/gstffmpegenc.h:
avenc: change properties of type ulong to int
2012-06-09 14:37:09 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* ext/ffmpeg/gstffmpegmux.c:
avmux: blacklist "segment" muxer
Causes run-time warnings.
2012-06-08 15:06:23 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* common:
Automatic update of common submodule
From 03a0e57 to 98e386f
2012-06-08 14:26:40 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* common:
Automatic update of common submodule
From b811047 to 3baf58a
2012-06-08 10:11:46 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/ffmpeg/gstffmpegcodecmap.c:
update for audio api changes
2012-06-07 16:35:37 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* configure.ac:
Back to development
=== release 0.11.92 ===
2012-06-07 Sebastian Dröge <sebastian.droege@collabora.co.uk>
2012-06-07 16:35:24 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* ChangeLog:
* NEWS:
* RELEASE:
* configure.ac:
releasing 0.11.92, "Wish You Were Here"
* gst-libav.doap:
Release 0.11.92
2012-06-07 12:29:41 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* gst-libs/ext/libav:
libav: Update to 0.8.3 release
2012-06-07 12:26:55 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
......@@ -16,6 +598,12 @@
Automatic update of common submodule
From 1fab359 to 03a0e57
2012-06-06 18:19:20 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* common:
Automatic update of common submodule
From b098abb to b811047
2012-06-06 13:03:18 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/ffmpeg/gstffmpegdemux.c:
......@@ -27,6 +615,12 @@
Automatic update of common submodule
From f1b5a96 to 1fab359
2012-06-01 10:22:26 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* common:
Automatic update of common submodule
From 96f075b to b098abb
2012-05-31 13:43:48 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/ffmpeg/gstffmpegcodecmap.c:
......@@ -48,12 +642,30 @@
Automatic update of common submodule
From ec1c4a8 to 92b7266
2012-05-30 12:40:59 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* common:
Automatic update of common submodule
From 1e6c5ea to 96f075b
2012-05-30 12:31:59 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* common:
Automatic update of common submodule
From ff4cad1 to 1e6c5ea
2012-05-30 11:26:18 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* common:
Automatic update of common submodule
From 3429ba6 to ec1c4a8
2012-05-30 11:26:07 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* common:
Automatic update of common submodule
From 7604bab to ff4cad1
2012-05-25 17:03:06 +0200 Wim Taymans <wim.taymans@collabora.co.uk>
* ext/ffmpeg/gstffmpegcodecmap.c:
......@@ -66,6 +678,11 @@
Automatic update of common submodule
From dc70203 to 3429ba6
2012-05-22 12:57:40 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* gst-libs/ext/libav:
libav: Update to 0.8.2 release
2012-05-22 12:56:16 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* gst-libs/ext/libav:
......@@ -87,6 +704,11 @@
* configure.ac:
configure: Require core/base 0.11.91
2012-05-15 14:43:19 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* tests/check/Makefile.am:
tests: Don't run the postproc test if compiled as an LGPL plugin
2012-05-15 14:41:18 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk>
* tests/check/Makefile.am:
......@@ -115,6 +737,78 @@
Automatic update of common submodule
From dc70203 to 3429ba6
2012-04-26 15:31:41 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
* ext/ffmpeg/gstffmpegcodecmap.c:
codecmap: correctly set height in AVCodecContext
https://bugzilla.gnome.org/show_bug.cgi?id=674899
2012-04-26 18:56:35 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* ext/ffmpeg/gstffmpegviddec.c:
ffmpegviddec: Always keep a reference to the frame
Ensures no data gets cleared before the decoders are really done
with it.
2012-04-26 17:00:43 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* ext/ffmpeg/gstffmpegviddec.c:
ffmpegviddec: Flush and drain when needed
we need to flush avcodec internal state on hard resets
we need to drain out pending buffers on EOS and soft resets
2012-04-24 15:36:30 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* ext/ffmpeg/gstffmpegviddec.c:
ffmpegviddec: Add video/x-raw-gray to src pad template
2012-04-24 15:36:00 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* ext/ffmpeg/gstffmpegcodecmap.c:
codecmap: Add more GstVideoInfo<=>PixelFormat mappings
2012-04-18 12:37:53 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* ext/ffmpeg/gstffmpegviddec.c:
ffmpegviddec: Port to GstVideoDecoder
2012-04-24 11:31:27 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* ext/ffmpeg/Makefile.am:
* ext/ffmpeg/gstffmpegvidenc.c:
* ext/ffmpeg/gstffmpegvidenc.h:
gstffmpegvidenc: Port to -base video classes
2012-04-07 11:14:45 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* ext/ffmpeg/gstffmpeg.c:
* ext/ffmpeg/gstffmpeg.h:
* ext/ffmpeg/gstffmpegcfg.c:
* ext/ffmpeg/gstffmpegcfg.h:
* ext/ffmpeg/gstffmpegdec.c:
* ext/ffmpeg/gstffmpegenc.c:
* ext/ffmpeg/gstffmpegenc.h:
* ext/ffmpeg/gstffmpegviddec.c:
* ext/ffmpeg/gstffmpegvidenc.c:
* ext/ffmpeg/gstffmpegvidenc.h:
ffmpegenc/dec: Remove audio/video specific code
Makes each file more manageable, second step to porting to base classes
2012-04-07 10:36:04 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* ext/ffmpeg/Makefile.am:
* ext/ffmpeg/gstffmpegviddec.c:
* ext/ffmpeg/gstffmpegvidenc.c:
* ext/ffmpeg/gstffmpegvidenc.h:
ffmpeg: Clone encoder and decoder files
First step in porting to base video classes
2012-04-24 11:31:44 +0200 Edward Hervey <edward.hervey@collabora.co.uk>
* ext/ffmpeg/gstffmpegcodecmap.c:
* ext/ffmpeg/gstffmpegcodecmap.h:
codecmap: Add utility for using with GstVideoFormat
2012-04-22 11:52:18 +0100 Tim-Philipp Müller <tim.muller@collabora.co.uk>
* ext/ffmpeg/gstffmpegdemux.c:
......
......@@ -3,7 +3,7 @@ AC_PREREQ(2.62)
dnl initialize autoconf
dnl when going to/from release please set the nano (fourth number) right !
dnl releases only do Wall, cvs and prerelease does Werror too
AC_INIT(GStreamer libav, 0.11.93.1,
AC_INIT(GStreamer libav, 0.11.94,
http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer,
gst-libav)
......@@ -45,7 +45,7 @@ AG_GST_LIBTOOL_PREPARE
AS_LIBTOOL(GST, 0, 0, 0)
dnl *** required versions of GStreamer stuff ***
GST_REQ=0.11.93
GST_REQ=0.11.94
ORC_REQ=0.4.16
ORC_CHECK([$ORC_REQ])
......
......@@ -32,6 +32,16 @@ colorspace conversion elements.
</GitRepository>
</repository>
<release>
<Version>
<revision>0.11.94</revision>
<branch>0.11</branch>
<name>To Each His Own Symphony</name>
<created>2012-09-14</created>
<file-release rdf:resource="http://gstreamer.freedesktop.org/src/gst-libav/gst-libav-0.11.94.tar.xz" />
</Version>
</release>
<release>
<Version>
<revision>0.11.93</revision>
......
Markdown is supported
0%