Stdout
Starting subtest: load
Stderr
Starting subtest: load
Dmesg
<6> [649.312680] [IGT] xe_module_load: executing
<6> [649.584690] [IGT] xe_module_load: starting subtest load
<4> [650.008051]
<4> [650.008060] **********************************************************
<4> [650.008062] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4> [650.008064] ** **
<4> [650.008066] ** trace_printk() being used. Allocating extra memory. **
<4> [650.008068] ** **
<4> [650.008070] ** This means that this is a DEBUG kernel and it is **
<4> [650.008072] ** unsafe for production use. **
<4> [650.008074] ** **
<4> [650.008076] ** If you see this message and you are not debugging **
<4> [650.008078] ** the kernel, report this immediately to your vendor! **
<4> [650.008080] ** **
<4> [650.008082] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4> [650.008083] **********************************************************
<5> [650.008626] Setting dangerous option force_probe - tainting kernel
<6> [650.021819] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [650.026086] xe 0000:03:00.0: enabling device (0000 -> 0002)
<7> [650.027236] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] XE_DG2 G10 56a0:0008 dgfx:1 gfx:Xe_HPG (12.55) media:Xe_HPM (12.55) display:yes dma_m_s:46 tc:1
<7> [650.027378] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:C0, M:C0, D:C0, B:**)
<7> [650.027489] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 09
<7> [650.028094] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [650.028210] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [650.029419] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [650.042246] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found valid VBT in SPI flash
<7> [650.042371] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT DASH G2 ", BDB version 249
<7> [650.042513] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 6, min size 7)
<7> [650.042678] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 395, min size 5)
<7> [650.042820] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [650.042952] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [650.043168] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 812, min size 812)
<7> [650.043300] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [650.043415] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [650.043601] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [650.043747] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [650.043881] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [650.044012] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 78, min size 78)
<7> [650.044184] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [650.044384] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [650.044588] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7> [650.044720] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [650.044840] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7> [650.044980] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [650.045137] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [650.045270] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [650.045404] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [650.045519] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [650.045634] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port A VBT HDMI level shift: 9
<7> [650.045748] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [650.045861] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port B VBT HDMI level shift: 9
<7> [650.045973] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [650.046107] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port C VBT HDMI level shift: 9
<7> [650.046219] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port H VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [650.046335] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port H VBT HDMI level shift: 9
<7> [650.046459] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 09
<7> [650.046622] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [650.046794] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [650.047185] xe 0000:03:00.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [650.047391] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os
<7> [650.047598] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [650.047815] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [650.047937] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [650.048073] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [650.048209] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6> [650.048367] xe 0000:03:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=none
<7> [650.048406] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [650.048580] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [650.048729] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [650.048877] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [650.049146] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/dg2_dmc_ver2_08.bin
<6> [650.055590] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/dg2_dmc_ver2_08.bin (v2.8)
<7> [650.056074] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<5> [650.106657] xe 0000:03:00.0: [drm] Force wake domain (0) failed to ack wake, ret=-110