<7> [140.319273] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7> [140.320308] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1800MHz (req 1800MHz), status = 0x00000072 [0x39/00]
<7> [140.329354] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1800MHz (req = 1800MHz), before = 1800MHz, status = 0x8002F034, timeouts = 0
<7> [140.329607] xe 0000:03:00.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<6> [140.607241] ata7: SATA link down (SStatus 4 SControl 300)
<6> [140.607272] ata5: SATA link down (SStatus 4 SControl 300)
<6> [140.608236] ata6: SATA link down (SStatus 4 SControl 300)
<6> [140.608303] ata8: SATA link down (SStatus 4 SControl 300)
<3> [140.916893] spd5118 3-0051: Failed to write b = 0: -110
<3> [141.123717] spd5118 3-0053: Failed to write b = 0: -110
<3> [141.364545] xe 0000:03:00.0: [drm] *ERROR* GT0: Timed out wait for G2H, fence 11207, action 3003, done no
<3> [141.364598] xe 0000:03:00.0: [drm] *ERROR* GT0: GuC PC query task state failed: -ETIME
<3> [141.364650] xe 0000:03:00.0: [drm] *ERROR* GT0: resume failed (-ETIME)
<7> [141.364652] xe 0000:03:00.0: [drm:xe_gt_resume [xe]] GT1: resuming
<7> [141.365368] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7> [141.365441] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7> [141.365520] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xa210] = 0x00000000
<7> [141.365585] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [141.365661] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [141.366757] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 20480
<7> [141.367803] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 1500MHz (req 1500MHz), status = 0x00000072 [0x39/00]
<7> [141.377466] xe 0000:03:00.0: [drm:__xe_guc_upload [xe]] GT1: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034, timeouts = 0
<7> [141.377718] xe 0000:03:00.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<3> [142.388651] xe 0000:03:00.0: [drm] *ERROR* GT1: Timed out wait for G2H, fence 10825, action 3003, done no
<3> [142.388654] xe 0000:03:00.0: [drm] *ERROR* GT1: GuC PC query task state failed: -ETIME
<3> [142.388671] xe 0000:03:00.0: [drm] *ERROR* GT1: resume failed (-ETIME)
<7> [142.388688] xe 0000:03:00.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [142.388869] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: disabled
<7> [142.388975] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7> [142.389087] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7> [142.389210] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:238:pipe D] hw state readout: disabled
<7> [142.389283] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: disabled, pipe A