Stdout
Using IGT_SRANDOM=1726137937 for randomisation
Opened device: /dev/dri/card0
Starting subtest: psr-suspend
Starting dynamic subtest: eDP-1
Testing mode:
2880x1800: 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
[cmd] rtcwake: wakeup from "mem" using /dev/rtc0 at Thu Sep 12 10:45:55 2024
Stderr
Starting subtest: psr-suspend
Starting dynamic subtest: eDP-1
Dmesg
<6> [982.928351] Console: switching to colour dummy device 80x25
<6> [982.928671] [IGT] kms_psr: executing
<7> [982.946464] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7> [982.946483] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7> [982.946611] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7> [982.946692] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7> [982.947035] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7> [982.947043] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7> [982.947730] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [982.948255] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [982.948477] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [982.948664] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [982.948933] xe 0000:00:02.0: [drm:update_display_info [drm]] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5> [982.949011] [drm] DisplayID checksum invalid, remainder is 248
<5> [982.949015] [drm] DisplayID checksum invalid, remainder is 248
<7> [982.949019] xe 0000:00:02.0: [drm:update_display_info [drm]] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5> [982.949086] [drm] DisplayID checksum invalid, remainder is 248
<7> [982.949091] xe 0000:00:02.0: [drm:update_display_info [drm]] [CONNECTOR:189:eDP-1] ELD monitor
<5> [982.949158] [drm] DisplayID checksum invalid, remainder is 248
<7> [982.949162] xe 0000:00:02.0: [drm:update_display_info [drm]] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5> [982.949227] [drm] DisplayID checksum invalid, remainder is 248
<7> [982.949257] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7> [982.949370] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [982.950053] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [982.950125] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5> [982.950697] [drm] DisplayID checksum invalid, remainder is 248
<5> [982.950700] [drm] DisplayID checksum invalid, remainder is 248
<5> [982.950702] [drm] DisplayID checksum invalid, remainder is 248
<7> [982.950752] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7> [982.950774] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [982.950811] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7> [982.950828] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7> [982.951020] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC1
<7> [982.953940] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 12 14 82 00 01 15 01 01 00 00 00 00 00 00 00
<7> [982.960979] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:198:DP-1][ENCODER:197:DDI TC1/PHY TC1][DPRX] LTTPR common capabilities: 20 1e 80 aa 02 00 01 03
<7> [982.963845] xe 0000:00:02.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:198:DP-1][ENCODER:197:DDI TC1/PHY TC1][LTTPR 1] PHY capabilities: 04 03 00
<7> [982.965295] xe 0000:00:02.0: [drm:drm_dp_dump_desc.isra.0 [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: LTTPR 1: OUI 98-4f-ee dev-ID GBR HW-rev 10.0 SW-rev 2.14 quirks 0x0000
<7> [982.966565] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD: 12 14 82 00 01 15 01 01 00 00 00 00 00 00 00
<7> [982.967798] xe 0000:00:02.0: [drm:drm_dp_dump_desc.isra.0 [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7> [982.969984] xe 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: DPCD DFP: 0b 78 00 00
<7> [982.970867] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [ENCODER:197:DDI TC1/PHY TC1] MST support: port: yes, sink: SST, modparam: yes -> enable: SST