7> [136.412894] [IGT] core_hotunplug: late closing removed device instance
<7> [136.443784] [IGT] core_hotunplug: rediscovering the device
<6> [136.444773] pci 0000:00:02.0: [8086:46a6] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6> [136.444793] pci 0000:00:02.0: BAR 0 [mem 0x607f000000-0x607fffffff 64bit]
<6> [136.444802] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref]
<6> [136.444808] pci 0000:00:02.0: BAR 4 [io 0x3000-0x303f]
<6> [136.444891] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
<6> [136.444895] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6> [136.444967] pci 0000:00:02.0: VF BAR 0 [mem 0x4010000000-0x4010ffffff 64bit]
<6> [136.444969] pci 0000:00:02.0: VF BAR 0 [mem 0x4010000000-0x4016ffffff 64bit]: contains BAR 0 for 7 VFs
<6> [136.444976] pci 0000:00:02.0: VF BAR 2 [mem 0x4020000000-0x403fffffff 64bit pref]
<6> [136.444977] pci 0000:00:02.0: VF BAR 2 [mem 0x4020000000-0x40ffffffff 64bit pref]: contains BAR 2 for 7 VFs
<6> [136.448051] pci 0000:00:02.0: Adding to iommu group 1
<6> [136.448184] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6> [136.448189] pci 0000:00:02.0: vgaarb: bridge control possible
<6> [136.448191] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
<6> [136.666643] pci 0000:00:02.0: VF BAR 2 [mem 0x4020000000-0x40ffffffff 64bit pref]: assigned
<6> [136.666650] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref]: assigned
<6> [136.666655] pci 0000:00:02.0: BAR 0 [mem 0x4010000000-0x4010ffffff 64bit]: assigned
<6> [136.666660] pci 0000:00:02.0: VF BAR 0 [mem 0x4018000000-0x401effffff 64bit]: assigned
<6> [136.666665] pci 0000:00:02.0: BAR 4 [io 0x1000-0x103f]: assigned
<6> [136.668787] xe 0000:00:02.0: vgaarb: deactivate vga console
<7> [136.670938] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] XE_ALDERLAKE_P 46a6:000c dgfx:0 gfx:Xe_LP (12.00) media:Xe_M (12.00) display:yes dma_m_s:39 tc:1 gscfi:0
<7> [136.671012] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:C0, M:C0, D:D0, B:**)
<7> [136.671056] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<7> [136.671115] xe 0000:00:02.0: [drm:intel_pch_type [xe]] Found Alder Lake PCH
<7> [136.671273] xe 0000:00:02.0: [drm] GT topology dss mask (geometry): 00000000,00000000,0000003f
<7> [136.671276] xe 0000:00:02.0: [drm] GT topology dss mask (compute): 00000000,00000000,00000000
<7> [136.671277] xe 0000:00:02.0: [drm] GT topology EU mask per DSS: 0000ffff
<7> [136.671279] xe 0000:00:02.0: [drm] GT topology L3 bank mask: 00000000,000000ff
<6> [136.671808] xe 0000:00:02.0: [drm] Using GuC firmware from i915/adlp_guc_70.bin version 70.20.0
<7> [136.673443] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x00255fd3
<7> [136.673501] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7> [136.673535] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7> [136.673568] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000003
<7> [136.673601] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000004d8
<7> [136.673633] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x46a6000c
<7> [136.673666] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7> [136.673698] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7> [136.673730] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7> [136.673762] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7> [136.673793] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7> [136.673824] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7> [136.673854] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7> [136.673885] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<6> [136.674528] xe 0000:00:02.0: [drm] Using HuC firmware from i915/tgl_huc.bin version 7.9.3
<7> [136.674746] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7> [136.674816] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [592K, 1420K)
<6> [136.674901] xe 0000:00:02.0: [drm] GT0: using 65535 GUC ID(s)
<7> [136.687369] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbell(s)
<6> [136.926006] xe 0000:00:02.0: [drm] GT0: GuC load failed: status = 0x400000A0
<6> [136.926032] xe 0000:00:02.0: [drm] GT0: GuC status: Reset = 0, BootROM = 0X50, UKernel = 0X0, MIA = 0X0, Auth = 0X1
<6> [136.926050] xe 0000:00:02.0: [drm] GT0: GuC firmware signature verification failed
<3> [136.984225] xe 0000:00:02.0: [drm] *ERROR* GT0: GuC mmio request 0x4100: no reply 0x4100
<3> [136.984591] xe 0000:00:02.0: probe with driver xe failed with error -110
<4> [137.005741] pcieport 10000:e0:06.0: Primary bus is hard wired to 0
<4> [137.005750] pcieport 10000:e0:06.0: Primary bus is hard wired to 0
<7> [138.007532] [IGT] core_hotunplug: reopening DRM device for health check
<6> [139.355027] [drm] amdgpu kernel modesetting enabled.
<7> [139.355228] [drm:amdgpu_acpi_detect [amdgpu]] No matching acpi device found for AMD3000
<6> [139.355929] amdgpu: Virtual CRAT table created for CPU
<6> [139.356399] amdgpu: Topology: Add CPU node
<4> [139.738951]
<4> [139.738962] **********************************************************
<4> [139.738964] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4> [139.738965] ** **
<4> [139.738966] ** trace_printk() being used. Allocating extra memory. **
<4> [139.738967] ** **
<4> [139.738969] ** This means that this is a DEBUG kernel and it is **
<4> [139.738970] ** unsafe for production use. **
<4> [139.738971] ** **
<4> [139.738972] ** If you see this message and you are not debugging **
<4> [139.738973] ** the kernel, report this immediately to your vendor! **
<4> [139.738974] ** **
<4> [139.738975] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4> [139.738976] **********************************************************
<5> [139.790472] Setting dangerous option force_probe - tainting kernel
<6> [139.797707] i915 0000:00:02.0: I915 probe blocked for Device ID 46a6.
<6> [139.810257] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
<6> [139.810862] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6> [139.864322] [IGT] core_hotunplug: finished subtest hotunplug-rescan, FAIL
<7> [139.864518] [IGT] core_hotunplug: rebinding the driver to the device
<6> [139.868405] xe 0000:00:02.0: vgaarb: deactivate vga console
<7> [139.871522] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] XE_ALDERLAKE_P 46a6:000c dgfx:0 gfx:Xe_LP (12.00) media:Xe_M (12.00) display:yes dma_m_s:39 tc:1 gscfi:0
<7> [139.871608] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:C0, M:C0, D:D0, B:**)
<7> [139.871671] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<7> [139.871756] xe 0000:00:02.0: [drm:intel_pch_type [xe]] Found Alder Lake PCH
<7> [139.872007] xe 0000:00:02.0: [drm] GT topology dss mask (geometry): 00000000,00000000,0000003f
<7> [139.872011] xe 0000:00:02.0: [drm] GT topology dss mask (compute): 00000000,00000000,00000000
<7> [139.872013] xe 0000:00:02.0: [drm] GT topology EU mask per DSS: 0000ffff
<7> [139.872015] xe 0000:00:02.0: [drm] GT topology L3 bank mask: 00000000,000000ff
<6> [139.874030] xe 0000:00:02.0: [drm] Using GuC firmware from i915/adlp_guc_70.bin version 70.20.0
<7> [139.875977] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x00255fd3
<7> [139.876058] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7> [139.876120] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7> [139.876179] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000003
<7> [139.876236] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000004d8
<7> [139.876293] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x46a6000c
<7> [139.876349] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7> [139.876407] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7> [139.876465] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7> [139.876523] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7> [139.876580] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7> [139.876638] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7> [139.876696] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7> [139.876752] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<6> [139.877726] xe 0000:00:02.0: [drm] Using HuC firmware from i915/tgl_huc.bin version 7.9.3
<7> [139.878033] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7> [139.878146] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [592K, 1420K)
<6> [139.878284] xe 0000:00:02.0: [drm] GT0: using 65535 GUC ID(s)
<7> [139.892620] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbell(s)
<6> [140.132162] xe 0000:00:02.0: [drm] GT0: GuC load failed: status = 0x400000A0
<6> [140.132194] xe 0000:00:02.0: [drm] GT0: GuC status: Reset = 0, BootROM = 0X50, UKernel = 0X0, MIA = 0X0, Auth = 0X1
<6> [140.132213] xe 0000:00:02.0: [drm] GT0: GuC firmware signature verification failed
<3> [140.190647] xe 0000:00:02.0: [drm] *ERROR* GT0: GuC mmio request 0x4100: no reply 0x4100
<3> [140.191013] xe 0000:00:02.0: probe with driver xe failed with error -110
<3> [140.210491] [IGT] core_hotunplug[1102]: Abort in function post_healthcheck, file ../../../usr/src/igt-gpu-tools/tests/core_hotunplug.c:534, priv->failure