All tests - dmesg-warn - *ERROR* GPIO index \d+ request failed
<7> [143.228093] i915 0000:00:02.0: [drm:intel_dsi_disable [i915]]
<7> [143.228306] i915 0000:00:02.0: [drm:intel_dsi_vbt_exec_sequence [i915]] Starting MIPI sequence 7 - MIPI_SEQ_BACKLIGHT_OFF
<7> [143.228495] i915 0000:00:02.0: [drm:mipi_exec_gpio [i915]]
<3> [143.236189] i915 0000:00:02.0: [drm] *ERROR* GPIO index 4 request failed (-22)
<7> [143.236197] i915 0000:00:02.0: [drm:mipi_exec_delay [i915]]
<7> [143.237464] i915 0000:00:02.0: [drm:intel_panel_set_pwm_level [i915]] set backlight PWM = 0
<7> [143.258175] i915 0000:00:02.0: [drm:intel_dsi_post_disable [i915]]
<7> [143.263175] i915 0000:00:02.0: [drm:bxt_dsi_pll_disable [i915]]
<7> [143.263375] i915 0000:00:02.0: [drm:intel_dsi_vbt_exec_sequence [i915]] Starting MIPI sequence 11 - MIPI_SEQ_POWER_OFF
<7> [143.263565] i915 0000:00:02.0: [drm:mipi_exec_gpio [i915]]
<3> [143.264285] i915 0000:00:02.0: [drm] *ERROR* GPIO index 3 request failed (-22)
<7> [143.264294] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A
<7> [143.264496] [drm:intel_dump_cdclk_config [i915]] Changing CDCLK to 79200 kHz, VCO 633600 kHz, ref 19200 kHz, bypass 19200 kHz, voltage level 4
<7> [143.264736] i915 0000:00:02.0: [drm:intel_atomic_commit_tail [i915]] [ENCODER:142:DDI B/PHY B]
<7> [143.264925] i915 0000:00:02.0: [drm:intel_atomic_commit_tail [i915]] [ENCODER:152:DDI C/PHY C]
<7> [143.265129] i915 0000:00:02.0: [drm:intel_atomic_commit_tail [i915]] [ENCODER:154:DP-MST A]
<7> [143.265315] i915 0000:00:02.0: [drm:intel_atomic_commit_tail [i915]] [ENCODER:155:DP-MST B]
<7> [143.265500] i915 0000:00:02.0: [drm:intel_atomic_commit_tail [i915]] [ENCODER:156:DP-MST C]
<7> [143.265685] i915 0000:00:02.0: [drm:intel_atomic_commit_tail [i915]] [ENCODER:160:DSI A]
<7> [143.265870] i915 0000:00:02.0: [drm:intel_dsi_get_hw_state [i915]]
<7> [143.266076] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:161:DSI-1]
<7> [143.266288] i915 0000:00:02.0: [drm:intel_dsi_get_hw_state [i915]]
<7> [143.266487] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.101 [i915]] PORT PLL A
<7> [143.266689] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.101 [i915]] PORT PLL B
<7> [143.266885] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.101 [i915]] PORT PLL C
<7> [143.267124] i915 0000:00:02.0: [drm:intel_atomic_commit_tail [i915]] [CRTC:67:pipe A]
<7> [143.873922] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX C
<7> [143.874203] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX B
<7> [143.874404] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX A
<7> [143.874601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling dpio-common-c
<7> [143.874800] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling dpio-common-b
<7> [143.874996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling dpio-common-a
<7> [143.875253] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling power well 2
<7> [143.875453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC off
<7> [143.875653] i915 0000:00:02.0: [drm:gen9_enable_dc5 [i915]] Enabling DC5
<7> [143.875842] i915 0000:00:02.0: [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 01
<7> [143.877027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [143.878123] i915 0000:00:02.0: [drm:gen9_set_dc_state [i915]] Setting DC state from 01 to 00
<7> [143.879180] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [143.879432] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling power well 1
<7> [143.879648] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable.isra.20 [i915]] power well 1 forced on (bios:1 driver:0 kvmr:0 debug:0)
<7> [143.879893] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [143.880085] i915 0000:00:02.0: [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 08
<6> [143.954039] ACPI: EC: interrupt blocked
<6> [144.000840] ACPI: Preparing to enter system sleep state S3
<6> [144.006675] ACPI: EC: event blocked
<6> [144.006681] ACPI: EC: EC stopped
<6> [144.006685] PM: Saving platform NVS memory
<6> [144.006711] Disabling non-boot CPUs ...
<6> [144.011167] smpboot: CPU 1 is now offline
<6> [144.017311] smpboot: CPU 2 is now offline
<6> [144.022723] smpboot: CPU 3 is now offline
<6> [144.026666] ACPI: Low-level resume complete
<6> [144.026947] ACPI: EC: EC started
<6> [144.026954] PM: Restoring platform NVS memory
<6> [144.027911] Enabling non-boot CPUs ...
<6> [144.028875] x86: Booting SMP configuration:
<6> [144.028886] smpboot: Booting Node 0 Processor 1 APIC 0x2
<6> [144.035711] CPU1 is up
<6> [144.036073] smpboot: Booting Node 0 Processor 2 APIC 0x4
<6> [144.043061] CPU2 is up
<6> [144.043471] smpboot: Booting Node 0 Processor 3 APIC 0x6
<6> [144.050968] CPU3 is up
<6> [144.051330] ACPI: Waking up from system sleep state S3
<6> [144.246310] ACPI: EC: interrupt unblocked
<7> [144.279535] i915 0000:00:02.0: [drm:intel_uncore_resume_early [i915]] unclaimed mmio detected on resume, clearing
<7> [144.280214] i915 0000:00:02.0: [drm:intel_display_power_resume_early [i915]] Resetting DC state tracking from 08 to 00
<7> [144.280552] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [144.280880] i915 0000:00:02.0: [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
<7> [144.281291] i915 0000:00:02.0: [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
<7> [144.281650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling power well 1
<7> [144.282005] [drm:intel_dump_cdclk_config [i915]] Current CDCLK 316800 kHz, VCO 633600 kHz, ref 19200 kHz, bypass 19200 kHz, voltage level 13
<7> [144.282466] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [144.283072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [144.283424] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC off
<7> [144.283751] i915 0000:00:02.0: [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
<7> [144.284143] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling power well 2
<7> [144.284486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-a
<7> [144.284980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-b
<7> [144.285515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling dpio-common-c
<7> [144.286019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX A
<7> [144.286389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX B
<7> [144.286718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX C