SNB : CI: boot - fail - Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
<7>[ 1.826382] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
<7>[ 1.839326] systemd[1]: Detected architecture x86-64.
<7>[ 1.847912] systemd[1]: Set hostname to <snb4>.
<5>[ 1.883413] random: fast init done
<6>[ 1.904837] systemd-cryptse (209) used greatest stack depth: 13240 bytes left
<6>[ 1.915063] systemd-fstab-g (212) used greatest stack depth: 12616 bytes left
<6>[ 1.917857] cat (213) used greatest stack depth: 12488 bytes left
<6>[ 1.918631] friendly-recove (207) used greatest stack depth: 12440 bytes left
<6>[ 1.992052] usb 2-1.8: new high-speed USB device number 3 using ehci-pci
<6>[ 2.002443] systemd-sysv-ge (220) used greatest stack depth: 12200 bytes left
<7>[ 2.022310] systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
<7>[ 2.022504] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
<6>[ 2.032140] tsc: Refined TSC clocksource calibration: 3392.293 MHz
<6>[ 2.032273] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5de2a436, max_idle_ns: 440795285127 ns
<6>[ 2.032649] clocksource: Switched to clocksource tsc
<6>[ 2.073947] usb 2-1.8: New USB device found, idVendor=18e3, idProduct=9106, bcdDevice= 1.00
<6>[ 2.074114] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 2.074226] usb 2-1.8: Product: Mass Storage Device
<6>[ 2.074301] usb 2-1.8: Manufacturer: Generic
<6>[ 2.074373] usb 2-1.8: SerialNumber: 18E391066476
<6>[ 2.075545] usb-storage 2-1.8:1.0: USB Mass Storage device detected
<6>[ 2.076585] scsi host6: usb-storage 2-1.8:1.0
<5>[ 2.113758] random: systemd: uninitialized urandom read (16 bytes read)
<7>[ 2.113859] systemd[1]: Reached target Remote File Systems.
<5>[ 2.114621] random: systemd: uninitialized urandom read (16 bytes read)
<7>[ 2.114998] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
<5>[ 2.115649] random: systemd: uninitialized urandom read (16 bytes read)
<7>[ 2.116739] systemd[1]: Created slice User and Session Slice.
<7>[ 2.118066] systemd[1]: Created slice System Slice.
<7>[ 2.119094] systemd[1]: Listening on Journal Socket.
<6>[ 2.331228] EXT4-fs (sda1): re-mounted. Opts: errors=panic. Quota mode: disabled.
<7>[ 2.371918] systemd-journald[235]: Received request to flush runtime journal from PID 1
<6>[ 2.373060] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
<4>[ 2.700100] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x00000000000005FE (\LBAE) (20201113/utaddress-213)
<6>[ 2.700124] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
<4>[ 2.700136] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x00000000000005FE (\LBAE) (20201113/utaddress-213)
<6>[ 2.700154] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
<4>[ 2.700165] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x00000000000005FE (\LBAE) (20201113/utaddress-213)
<6>[ 2.700183] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
<4>[ 2.700187] lpc_ich: Resource conflict(s) found affecting gpio_ich
<6>[ 2.861924] pps_core: LinuxPPS API ver. 1 registered
<6>[ 2.861931] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 2.871423] PTP clock support registered
<6>[ 3.004406] libphy: tg3 mdio bus: probed
<6>[ 3.012115] Broadcom BCM57780 200:01: attached PHY driver (mii_bus:phy_addr=200:01, irq=POLL)
<6>[ 3.015662] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57788) rev 57780001] (PCI Express) MAC address 78:2b:cb:9a:34:46
<6>[ 3.015674] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
<6>[ 3.015680] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
<6>[ 3.102842] tg3 0000:02:00.0 enp2s0: renamed from eth0
<5>[ 3.121942] scsi 6:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
<5>[ 3.122676] scsi 6:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
<5>[ 3.123562] scsi 6:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
<5>[ 3.124741] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS
<5>[ 3.127454] sd 6:0:0:0: Attached scsi generic sg1 type 0
<5>[ 3.129609] sd 6:0:0:1: Attached scsi generic sg2 type 0
<5>[ 3.131322] sd 6:0:0:2: Attached scsi generic sg3 type 0
<5>[ 3.132569] sd 6:0:0:3: Attached scsi generic sg4 type 0
<5>[ 3.146086] sd 6:0:0:1: [sdc] Attached SCSI removable disk
<5>[ 3.152028] sd 6:0:0:3: [sde] Attached SCSI removable disk
<5>[ 3.155891] sd 6:0:0:0: [sdb] Attached SCSI removable disk
<5>[ 3.157715] sd 6:0:0:2: [sdd] Attached SCSI removable disk
<4>[ 3.983276] **********************************************************
<4>[ 3.983280] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 3.983284] ** **
<4>[ 3.983288] ** trace_printk() being used. Allocating extra memory. **
<4>[ 3.983291] ** **
<4>[ 3.983295] ** This means that this is a DEBUG kernel and it is **
<4>[ 3.983299] ** unsafe for production use. **
<4>[ 3.983303] ** **
<4>[ 3.983306] ** If you see this message and you are not debugging **
<4>[ 3.983310] ** the kernel, report this immediately to your vendor! **
<4>[ 3.983313] ** **
<4>[ 3.983317] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 3.983320] **********************************************************