Dmesg
<6> [322.656948] [IGT] i915_selftest: starting dynamic subtest objects
<5> [322.754472] Setting dangerous option live_selftests - tainting kernel
<7> [322.796854] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] WOPCM: 1024K
<7> [322.797221] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] enable_guc=0 (guc:no submission:no huc:no)
<7> [322.798390] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Comet Lake PCH (CMP)
<7> [322.798929] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02
<7> [322.800413] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing
<7> [322.800728] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz
<7> [322.801713] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
<7> [322.801845] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
<7> [322.801963] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M
<6> [322.802105] i915 0000:00:02.0: [drm] VT-d active for gfx access
<6> [322.802118] i915 0000:00:02.0: vgaarb: deactivate vga console
<7> [322.802712] i915 0000:00:02.0: [drm:init_stolen [i915]] GEN6_STOLEN_RESERVED = 9f700047
<7> [322.802854] i915 0000:00:02.0: [drm:init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K
<7> [322.803001] [drm:i915_driver_probe [i915]] Initialized 4 GT workarounds on global
<7> [322.803286] i915 0000:00:02.0: [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params
<7> [322.803631] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x99b62000
<7> [322.804293] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0
<7> [322.804664] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported
<7> [322.805029] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported
<7> [322.805366] i915 0000:00:02.0: [drm:swsci [i915]] SWSCI request already in progress
<7> [322.805672] i915 0000:00:02.0: [drm:swsci [i915]] SWSCI request already in progress
<7> [322.806547] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000001, SBCB callbacks 00000001
<7> [322.806973] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported
<7> [322.807290] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported
<7> [322.807954] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
<7> [322.808234] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: DDR4
<7> [322.808597] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 1, 16Gb DIMMs: no
<7> [322.808894] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no
<7> [322.809809] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no
<7> [322.810109] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 1, 16Gb DIMMs: no
<7> [322.810467] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no
<7> [322.810841] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no
<7> [322.810946] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Memory configuration is symmetric? yes
<7> [322.811090] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM bandwidth: 42666672 kBps, channels: 2
<7> [322.811194] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM ranks: 1, 16Gb DIMMs: no
<7> [322.812012] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
<7> [322.812191] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 231
<7> [322.812334] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7> [322.812475] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
<7> [322.812614] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806
<7> [322.813372] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [322.813638] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [322.814075] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [322.815050] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Panel type: 2 (VBT)
<7> [322.815406] i915 0000:00:02.0: [drm:intel_bios_init [i915]] DRRS supported mode is static
<7> [322.815734] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 1000 Hz, active high, min brightness 0, level 255, controller 0
<7> [322.816647] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping
<7> [322.816930] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [322.817326] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0
<7> [322.817660] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT DP max link rate for port A: 810000
<7> [322.818276] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:1 TBT:0 DSC:0
<7> [322.818524] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 8
<7> [322.818920] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT DP max link rate for port B: 810000
<7> [322.819276] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:1 TBT:0 DSC:0
<7> [322.820209] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 8
<7> [322.820519] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT DP max link rate for port C: 810000
<7> [322.820814] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [322.821415] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT HDMI level shift for port D: 8
<7> [322.821669] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT DP max link rate for port D: 810000
<7> [322.822057] i915 0000:00:02.0: [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
<7> [322.822434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling power well 1
<7> [322.822682] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC IO power well
<7> [322.823568] [drm:intel_dump_cdclk_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
<7> [322.823929] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz
<7> [322.824229] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz
<7> [322.824372] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [322.824794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [322.824937] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC off
<7> [322.825104] i915 0000:00:02.0: [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
<7> [322.825262] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling power well 2
<7> [322.825444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
<7> [322.825592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI B IO power well
<7> [322.825735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI C IO power well
<7> [322.825878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI D IO power well
<7> [322.826335] i915 0000:00:02.0: [drm:intel_csr_ucode_init [i915]] Loading i915/kbl_dmc_ver1_04.bin
<6> [322.827516] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
<7> [322.827797] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
<7> [322.828953] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)
<7> [322.829432] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)
<7> [322.829745] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)
<7> [322.830070] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)
<7> [322.830981] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)
<7> [322.831280] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)
<7> [322.831656] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)
<7> [322.831956] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)
<7> [322.833333] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.
<7> [322.835096] [drm:intel_dump_cdclk_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
<7> [322.835872] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX A for port A (VBT)
<7> [322.836135] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]
<7> [322.836681] [drm:intel_pps_dump_state [i915]] cur t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000
<7> [322.837573] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 1500 t9 2000 t10 500 t11_t12 6000
<7> [322.837964] i915 0000:00:02.0: [drm:intel_dp_init_panel_power_sequencer [i915]] panel power up delay 200, power down delay 50, power cycle delay 600
<7> [322.838405] i915 0000:00:02.0: [drm:intel_dp_init_panel_power_sequencer [i915]] backlight on delay 150, off delay 200
<7> [322.839234] i915 0000:00:02.0: [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7> [322.839567] i915 0000:00:02.0: [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A/PHY A] VDD on
<7> [322.840283] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
<7> [323.495445] i915 0000:00:02.0: [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000060
<7> [323.496165] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [323.496950] i915 0000:00:02.0: [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068
<7> [323.497647] i915 0000:00:02.0: [drm:edp_panel_vdd_on [i915]] [ENCODER:94:DDI A/PHY A] panel power wasn't enabled
<7> [323.705103] [drm:drm_dp_read_dpcd_caps] AUX A/DDI A/PHY A: DPCD: 11 0a 82 41 00 00 01 c0 02 00 00 00 0f 0b 00
<7> [323.706203] [drm:drm_dp_read_desc] AUX A/DDI A/PHY A: DP sink: OUI 00-1c-f8 dev-ID \223\006UA\024\001 HW-rev 10.0 SW-rev 1.8 quirks 0x0000
<7> [323.709302] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 ff ef
<7> [323.710097] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1
<7> [323.716730] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [323.716737] [drm:drm_add_display_info] non_desktop set to 0
<7> [323.716750] [drm:drm_add_edid_modes] ELD: no CEA Extension found
<7> [323.716753] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [323.716756] [drm:drm_add_display_info] non_desktop set to 0
<7> [323.716773] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [323.716777] [drm:drm_add_display_info] non_desktop set to 0
<7> [323.716789] [drm:drm_dp_get_edid_quirks] DP sink: EDID mfg 06-af prod-ID 3d-24 quirks: 0x0000
<7> [323.716797] i915 0000:00:02.0: [drm:intel_panel_edid_fixed_mode [i915]] [CONNECTOR:95:eDP-1] using preferred mode from EDID:
<7> [323.716930] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 141000 1920 1936 1952 2104 1080 1083 1097 1116 0x48 0x9
<7> [323.716938] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] VBT doesn't support DRRS
<7> [323.717081] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] AUX Backlight Control Supported!
<6> [323.717394] i915 0000:00:02.0: [drm] Panel advertises DPCD backlight support, but VBT disagrees. If your backlight controls don't work try booting with i915.enable_dpcd_backlight=1. If your machine needs this, please file a _new_ bug report on drm/i915, see https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs for details.
<7> [323.717526] i915 0000:00:02.0: [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, disabled, brightness 0/24000
<7> [323.717802] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (VBT)
<7> [323.717940] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:102:DDI B/PHY B]
<7> [323.718328] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:102:DDI B/PHY B]
<7> [323.718654] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x1 for port B (VBT)
<7> [323.718898] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX C for port C (VBT)
<7> [323.719055] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI C/PHY C]
<7> [323.719355] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:118:DDI C/PHY C]
<7> [323.719546] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x2 for port C (VBT)
<7> [323.719871] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled
<7> [323.720042] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled
<7> [323.720187] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled
<7> [323.720497] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A
<7> [323.720633] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A
<7> [323.720769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A
<7> [323.721100] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B
<7> [323.721390] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B
<7> [323.722088] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B
<7> [323.722341] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C
<7> [323.722643] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C
<7> [323.723437] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C
<7> [323.723720] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: crtc_mask 0x00000000, on 1
<7> [323.723986] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: crtc_mask 0x00000000, on 0
<7> [323.724520] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0
<7> [323.724774] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0
<7> [323.725073] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI A/PHY A] hw state readout: disabled, pipe A
<7> [323.725859] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:102:DDI B/PHY B] hw state readout: disabled, pipe A
<7> [323.726202] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DP-MST A] hw state readout: disabled, pipe A
<7> [323.726488] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DP-MST B] hw state readout: disabled, pipe B
<7> [323.727280] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DP-MST C] hw state readout: disabled, pipe C
<7> [323.727567] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI C/PHY C] hw state readout: disabled, pipe A
<7> [323.727830] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST A] hw state readout: disabled, pipe A
<7> [323.728131] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST B] hw state readout: disabled, pipe B
<7> [323.728675] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DP-MST C] hw state readout: disabled, pipe C
<7> [323.728971] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:eDP-1] hw state readout: disabled
<7> [323.729219] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:103:DP-1] hw state readout: disabled
<7> [323.729505] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled
<7> [323.729775] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-2] hw state readout: disabled
<7> [323.730073] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:125:HDMI-A-2] hw state readout: disabled
<7> [323.730858] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz
<7> [323.731146] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz
<7> [323.731426] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz
<7> [323.731963] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] pipe A data rate 0 num active planes 0
<7> [323.732219] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz
<7> [323.732505] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz
<7> [323.732774] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz
<7> [323.733058] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] pipe B data rate 0 num active planes 0
<7> [323.733189] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz
<7> [323.733449] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz
<7> [323.733579] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz
<7> [323.733708] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] pipe C data rate 0 num active planes 0
<7> [323.733867] i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]
<7> [323.733997] i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]
<7> [323.734159] i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]
<7> [323.734294] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling
<7> [323.734612] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, 100000000]
<7> [323.737085] [drm:intel_engines_init [i915]] Initialized 5 engine workarounds on rcs'0
<7> [323.737212] [drm:intel_engines_init [i915]] Initialized 5 whitelist workarounds on rcs'0
<7> [323.737329] [drm:__intel_engine_init_ctx_wa [i915]] Initialized 14 context workarounds on rcs'0
<7> [323.739062] [drm:intel_engines_init [i915]] Initialized 1 whitelist workarounds on bcs'0
<7> [323.739435] [drm:intel_engines_init [i915]] Initialized 1 whitelist workarounds on vcs'0
<7> [323.739809] [drm:intel_engines_init [i915]] Initialized 1 whitelist workarounds on vecs'0
<7> [323.750199] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV
<7> [323.751049] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] pipe A not active or no fb, skipping
<7> [323.751192] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping
<7> [323.751504] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping
<7> [323.751822] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config
<7> [323.752961] [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0
<7> [323.753209] [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0
<7> [323.753501] [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0
<7> [323.754593] [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0
<7> [323.758634] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered
<7> [323.758868] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7> [323.760009] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1
<7> [323.761961] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2
<6> [323.763142] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
<7> [323.765527] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected
<4> [323.765876] [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS
<6> [323.766233] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6> [323.766957] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input48
<7> [323.768499] i915 0000:00:02.0: [drm:intel_audio_init [i915]] init value of AUD_FREQ_CNTRL of 0x10
<7> [323.769134] [drm:drm_client_modeset_probe]
<7> [323.769196] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1]
<7> [323.769131] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI D IO power well
<7> [323.769206] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]
<7> [323.769354] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] status updated from unknown to disconnected
<7> [323.769373] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] disconnected
<7> [323.769378] [drm:drm_connector_update_edid_property] [CONNECTOR:95:eDP-1] Edid was changed.
<7> [323.769312] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI C IO power well
<7> [323.769383] [drm:drm_connector_update_edid_property] Updating change counter to 2
<7> [323.769397] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1]
<7> [323.769403] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]
<7> [323.769459] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI B IO power well
<7> [323.769542] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] status updated from unknown to disconnected
<7> [323.769547] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] disconnected
<7> [323.769552] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]
<7> [323.769557] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [323.769602] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well
<7> [323.769695] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected
<7> [323.769699] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [323.769704] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2]
<7> [323.769709] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]
<7> [323.769742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling power well 2
<7> [323.769860] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] status updated from unknown to disconnected
<7> [323.769865] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected
<7> [323.769870] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:125:HDMI-A-2]
<7> [323.769875] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]
<7> [323.770014] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:125:HDMI-A-2] status updated from unknown to disconnected
<7> [323.770047] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:125:HDMI-A-2] disconnected
<7> [323.770057] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [323.770066] [drm:drm_client_modeset_probe] connector 95 enabled? no
<7> [323.770072] [drm:drm_client_modeset_probe] connector 103 enabled? no
<7> [323.770077] [drm:drm_client_modeset_probe] connector 113 enabled? no
<7> [323.770081] [drm:drm_client_modeset_probe] connector 119 enabled? no
<7> [323.770085] [drm:drm_client_modeset_probe] connector 125 enabled? no
<7> [323.770115] [drm:drm_client_firmware_config.isra.10] Not using firmware configuration
<7> [323.770125] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [323.770150] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<7> [323.770159] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 1 primary plane
<7> [323.770165] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 2 primary plane
<6> [323.770172] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
<7> [323.770186] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
<7> [323.770356] i915 device info: pciid=0x9b41 rev=0x02 platform=COMETLAKE (subplatform=0x1) gen=9
<7> [323.770360] i915 device info: gen: 9
<7> [323.770362] i915 device info: gt: 2
<7> [323.770364] i915 device info: iommu: enabled
<7> [323.770366] i915 device info: memory-regions: 5
<7> [323.770368] i915 device info: page-sizes: 11000
<7> [323.770370] i915 device info: platform: COMETLAKE
<7> [323.770372] i915 device info: ppgtt-size: 48
<7> [323.770374] i915 device info: ppgtt-type: 2
<7> [323.770376] i915 device info: dma_mask_size: 39
<7> [323.770378] i915 device info: is_mobile: no
<7> [323.770380] i915 device info: is_lp: no
<7> [323.770382] i915 device info: require_force_probe: no
<7> [323.770385] i915 device info: is_dgfx: no
<7> [323.770387] i915 device info: has_64bit_reloc: yes
<7> [323.770389] i915 device info: gpu_reset_clobbers_display: no
<7> [323.770391] i915 device info: has_reset_engine: yes
<7> [323.770393] i915 device info: has_fpga_dbg: yes
<7> [323.770395] i915 device info: has_global_mocs: no
<7> [323.770396] i915 device info: has_gt_uc: yes
<7> [323.770398] i915 device info: has_l3_dpf: no
<7> [323.770400] i915 device info: has_llc: yes
<7> [323.770402] i915 device info: has_logical_ring_contexts: yes
<7> [323.770404] i915 device info: has_logical_ring_elsq: no
<7> [323.770406] i915 device info: has_master_unit_irq: no
<7> [323.770408] i915 device info: has_pooled_eu: no
<7> [323.770410] i915 device info: has_rc6: yes
<7> [323.770412] i915 device info: has_rc6p: no
<7> [323.770414] i915 device info: has_rps: yes
<7> [323.770416] i915 device info: has_runtime_pm: yes
<7> [323.770418] i915 device info: has_snoop: no
<7> [323.770420] i915 device info: has_coherent_ggtt: yes
<7> [323.770422] i915 device info: unfenced_needs_alignment: no
<7> [323.770424] i915 device info: hws_needs_physical: no
<7> [323.770426] i915 device info: cursor_needs_physical: no
<7> [323.770428] i915 device info: has_csr: yes
<7> [323.770429] i915 device info: has_ddi: yes
<7> [323.770431] i915 device info: has_dp_mst: yes
<7> [323.770433] i915 device info: has_dsb: no
<7> [323.770435] i915 device info: has_dsc: no
<7> [323.770437] i915 device info: has_fbc: yes
<7> [323.770439] i915 device info: has_gmch: no
<7> [323.770441] i915 device info: has_hdcp: yes
<7> [323.770443] i915 device info: has_hotplug: yes
<7> [323.770445] i915 device info: has_hti: no
<7> [323.770447] i915 device info: has_ipc: yes
<7> [323.770449] i915 device info: has_modular_fia: no
<7> [323.770450] i915 device info: has_overlay: no
<7> [323.770452] i915 device info: has_psr: yes
<7> [323.770454] i915 device info: has_psr_hw_tracking: yes
<7> [323.770456] i915 device info: overlay_needs_physical: no
<7> [323.770458] i915 device info: supports_tv: no
<7> [323.770460] i915 device info: rawclk rate: 24000 kHz
<7> [323.770463] i915 device info: available engines: 47
<7> [323.770465] i915 device info: slice total: 1, mask=0001
<7> [323.770467] i915 device info: subslice total: 3
<7> [323.770469] i915 device info: slice0: 3 subslices, mask=00000007
<7> [323.770472] i915 device info: slice1: 0 subslices, mask=00000000
<7> [323.770474] i915 device info: slice2: 0 subslices, mask=00000000
<7> [323.770476] i915 device info: EU total: 24
<7> [323.770478] i915 device info: EU per subslice: 8
<7> [323.770480] i915 device info: has slice power gating: no
<7> [323.770482] i915 device info: has subslice power gating: no
<7> [323.770484] i915 device info: has EU power gating: yes
<6> [323.770486] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled
<6> [323.770488] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled
<6> [323.770490] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled
<6> [323.770494] i915: Performing live selftests with st_random_seed=0xcb274e43 st_timeout=500
<6> [323.770496] i915: Running objects
<6> [323.770508] i915: Running i915_gem_object_live_selftests/igt_gem_huge
<7> [323.770600] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
<7> [323.770720] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [323.770828] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [323.770937] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [323.771674] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:60:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
<7> [323.773639] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:60:plane 2B] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [323.774107] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:60:plane 2B] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [323.774719] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:60:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [323.775616] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
<7> [323.776143] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [323.776740] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [323.777619] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [323.778133] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:73:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
<7> [323.778697] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:73:plane 1C] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [323.779570] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:73:plane 1C] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [323.780085] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:73:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [323.780648] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:81:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
<7> [323.781542] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:81:plane 2C] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [323.782034] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:81:plane 2C] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [323.782601] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:81:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [323.783457] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:89:cursor C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
<7> [323.783934] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:89:cursor C] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [323.784469] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:89:cursor C] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [323.785582] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:89:cursor C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [323.786503] [drm:drm_client_modeset_probe]
<7> [323.786711] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1]
<7> [323.787510] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]
<7> [323.788014] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] disconnected
<7> [323.788044] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1]
<7> [323.788055] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]
<7> [323.788612] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] disconnected
<7> [323.788623] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]
<7> [323.788632] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [323.789202] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [323.789212] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2]
<7> [323.789221] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]
<7> [323.790660] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected
<7> [323.790672] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:125:HDMI-A-2]
<7> [323.790682] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]
<7> [323.791270] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:125:HDMI-A-2] disconnected
<7> [323.791279] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [323.791288] [drm:drm_client_modeset_probe] connector 95 enabled? no
<7> [323.791294] [drm:drm_client_modeset_probe] connector 103 enabled? no
<7> [323.791300] [drm:drm_client_modeset_probe] connector 113 enabled? no
<7> [323.791307] [drm:drm_client_modeset_probe] connector 119 enabled? no
<7> [323.792195] [drm:drm_client_modeset_probe] connector 125 enabled? no
<7> [323.792757] [drm:drm_client_firmware_config.isra.10] Not using firmware configuration
<7> [323.792774] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [323.792806] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<7> [323.793349] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 1 primary plane
<7> [323.793356] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 2 primary plane
<6> [323.793360] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
<3> [323.873578] Failed to allocate 509 pages (1048577 total), err=-12
<3> [323.874218] i915/i915_gem_object_live_selftests: igt_gem_huge failed with error -12
<7> [323.874233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling power well 2
<7> [323.874536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
<7> [323.875172] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI B IO power well
<7> [323.875439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI C IO power well
<7> [323.875753] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI D IO power well
<7> [323.876318] intel_gt_set_wedged called from intel_gt_driver_unregister+0x19/0x50 [i915]
<7> [323.941588] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper
<7> [323.941809] i915 0000:00:02.0: [drm:edp_panel_vdd_off_sync [i915]] Turning [ENCODER:94:DDI A/PHY A] VDD off
<7> [323.942123] i915 0000:00:02.0: [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7> [323.950126] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0x15/0x30 [i915]
<4> [324.003631] i915: probe of 0000:00:02.0 failed with error -12