Skip to content

SKL: igt@drm_mm@all@replace - Incomplete - Direct firmware load for rtl_nic/rtl8153a-4.fw failed with error -2

https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9493/shard-skl2/igt@drm_mm@all@replace.html

Dmesg	
<6> [1171.413753] [IGT] drm_mm: starting dynamic subtest replace
<6> [1171.446983] drm_mm: Testing DRM range manager (struct drm_mm), with random_seed=0xeb175df max_iterations=8192 max_prime=128
<6> [1218.203525] usb 2-2: USB disconnect, device number 4
<4> [1218.210907] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
<6> [1218.675802] usb 2-2: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd
<6> [1218.723234] usb 2-2: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
<6> [1218.723406] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
<6> [1218.723450] usb 2-2: Product: USB 10/100/1000 LAN
<6> [1218.723492] usb 2-2: Manufacturer: Realtek
<6> [1218.723534] usb 2-2: SerialNumber: 000001
<6> [1218.949697] usb 2-2: reset SuperSpeed Gen 1 USB device number 5 using xhci_hcd
<4> [1219.063047] r8152 2-2:1.0: Direct firmware load for rtl_nic/rtl8153a-4.fw failed with error -2
<4> [1219.063223] r8152 2-2:1.0: unable to load firmware patch rtl_nic/rtl8153a-4.fw (-2)
<6> [1219.087156] r8152 2-2:1.0 eth0: v1.11.11
<6> [1220.027195] r8152 2-2:1.0 enx00e04c6800b8: renamed from eth0
<6> [1222.202947] r8152 2-2:1.0 enx00e04c6800b8: carrier on
<6> [1222.203088] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04c6800b8: link becomes ready
<6> [1242.291514] usb 2-2: USB disconnect, device number 5
<4> [1242.297294] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
<6> [1242.716112] usb 2-2: new SuperSpeed Gen 1 USB device number 6 using xhci_hcd
<6> [1242.736410] usb 2-2: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
<6> [1242.736462] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
<6> [1242.736503] usb 2-2: Product: USB 10/100/1000 LAN
<6> [1242.736542] usb 2-2: Manufacturer: Realtek
<6> [1242.736581] usb 2-2: SerialNumber: 000001
<6> [1243.011743] usb 2-2: reset SuperSpeed Gen 1 USB device number 6 using xhci_hcd
<4> [1243.132576] r8152 2-2:1.0: Direct firmware load for rtl_nic/rtl8153a-4.fw failed with error -2
<4> [1243.132751] r8152 2-2:1.0: unable to load firmware patch rtl_nic/rtl8153a-4.fw (-2)
<6> [1243.148906] r8152 2-2:1.0 eth0: v1.11.11
<6> [1244.146643] r8152 2-2:1.0 enx00e04c6800b8: renamed from eth0
<6> [1246.213862] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04c6800b8: link becomes ready
<6> [1246.218835] r8152 2-2:1.0 enx00e04c6800b8: carrier on
To upload designs, you'll need to enable LFS and have an admin enable hashed storage. More information