Dmesg
<6> [719.762195] [IGT] i915_selftest: starting dynamic subtest gt_heartbeat
<5> [720.803913] Setting dangerous option live_selftests - tainting kernel
<7> [721.193682] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] WOPCM: 1024K
<7> [721.194448] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] enable_guc=0 (guc:no submission:no huc:no)
<7> [721.199996] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH
<7> [721.205146] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02
<7> [721.220459] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing
<7> [721.225483] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz
<7> [721.230528] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] CS timestamp wraparound in 178241ms
<7> [721.240934] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
<7> [721.241481] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
<7> [721.250726] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M
<6> [721.250847] i915 0000:00:02.0: [drm] VT-d active for gfx access
<6> [721.250985] i915 0000:00:02.0: vgaarb: deactivate vga console
<7> [721.257901] i915 0000:00:02.0: [drm:init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047
<7> [721.258399] i915 0000:00:02.0: [drm:init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K
<7> [721.259267] [drm:i915_driver_probe [i915]] Initialized 5 GT workarounds on global
<7> [721.261730] i915 0000:00:02.0: [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params
<7> [721.262579] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x7aaa68c0
<7> [721.263681] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0
<7> [721.264411] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported
<7> [721.265108] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported
<7> [721.265713] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported
<7> [721.266454] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
<7> [721.267066] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3
<7> [721.267491] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 16 Gb, width: X32, ranks: 1, 16Gb DIMMs: no
<7> [721.268103] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no
<7> [721.268592] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no
<7> [721.269255] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 16 Gb, width: X32, ranks: 1, 16Gb DIMMs: no
<7> [721.269807] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no
<7> [721.270468] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no
<7> [721.271117] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Memory configuration is symmetric? yes
<7> [721.271690] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM bandwidth: 29866672 kBps, channels: 2
<7> [721.272378] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM ranks: 1, 16Gb DIMMs: no
<7> [721.279162] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
<7> [721.279821] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 212
<7> [721.280536] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7> [721.281210] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
<7> [721.281803] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806
<7> [721.282654] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [721.283491] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [721.284244] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [721.285105] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Panel type: 2 (VBT)
<7> [721.285822] i915 0000:00:02.0: [drm:intel_bios_init [i915]] DRRS supported mode is static
<7> [721.286756] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT legacy lfp table:
<7> [721.286922] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7> [721.287619] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT initial LVDS value 300
<7> [721.288315] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 25000 Hz, active high, min brightness 0, level 255, controller 0
<7> [721.288938] i915 0000:00:02.0: [drm:intel_bios_init [i915]] DRRS State Enabled:1
<7> [721.289444] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping
<7> [721.290078] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [721.290645] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0
<7> [721.291348] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:1 TBT:0 DSC:0
<7> [721.292119] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 8
<7> [721.292842] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:1 TBT:0 DSC:0
<7> [721.293616] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 8
<7> [721.294224] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [721.294760] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT HDMI level shift for port D: 8
<7> [721.295349] i915 0000:00:02.0: [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
<7> [721.296321] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling power well 1
<7> [721.297107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC IO power well
<7> [721.297730] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [721.302502] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz
<7> [721.303233] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz
<7> [721.304048] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [721.305159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [721.305797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC off
<7> [721.306632] i915 0000:00:02.0: [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
<7> [721.307764] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling power well 2
<7> [721.312618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
<7> [721.317862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI B IO power well
<7> [721.323130] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI C IO power well
<7> [721.334691] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI D IO power well
<7> [721.344639] i915 0000:00:02.0: [drm:intel_csr_ucode_init [i915]] Loading i915/kbl_dmc_ver1_04.bin
<6> [721.363758] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
<7> [721.364403] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
<7> [721.378371] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)
<7> [721.378886] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)
<7> [721.384037] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)
<7> [721.389179] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)
<7> [721.394271] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)
<7> [721.399421] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)
<7> [721.412880] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)
<7> [721.418059] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)
<7> [721.439715] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.
<7> [721.456987] [drm:intel_dump_cdclk_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
<7> [721.466451] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX A for port A (VBT)
<7> [721.467448] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]
<7> [721.473805] [drm:intel_pps_dump_state [i915]] cur t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000
<7> [721.474758] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
<7> [721.475605] i915 0000:00:02.0: [drm:intel_dp_init_panel_power_sequencer [i915]] panel power up delay 200, power down delay 50, power cycle delay 600
<7> [721.476443] i915 0000:00:02.0: [drm:intel_dp_init_panel_power_sequencer [i915]] backlight on delay 1, off delay 200
<7> [721.477453] i915 0000:00:02.0: [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
<7> [721.479613] i915 0000:00:02.0: [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:94:DDI A/PHY A] VDD on
<7> [721.480586] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
<7> [722.110434] i915 0000:00:02.0: [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000
<7> [722.111141] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [722.116228] i915 0000:00:02.0: [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008
<7> [722.121012] i915 0000:00:02.0: [drm:edp_panel_vdd_on [i915]] [ENCODER:94:DDI A/PHY A] panel power wasn't enabled
<7> [722.335604] [drm:drm_dp_read_dpcd_caps] AUX A/DDI A/PHY A: DPCD: 12 0a 84 41 00 00 01 c0 02 03 00 00 00 0b 00
<7> [722.340715] [drm:drm_dp_read_desc] AUX A/DDI A/PHY A: DP sink: OUI 00-60-ad dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7> [722.355295] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 bb ff
<7> [722.372620] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1
<7> [722.391989] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [722.392022] [drm:drm_add_display_info] non_desktop set to 0
<7> [722.392110] [drm:drm_add_edid_modes] ELD: no CEA Extension found
<7> [722.392137] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [722.392159] [drm:drm_add_display_info] non_desktop set to 0
<7> [722.392259] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [722.392282] [drm:drm_add_display_info] non_desktop set to 0
<7> [722.392560] [drm:drm_dp_get_edid_quirks] DP sink: EDID mfg 4d-10 prod-ID 99-14 quirks: 0x0000
<7> [722.393156] i915 0000:00:02.0: [drm:intel_panel_edid_fixed_mode [i915]] [CONNECTOR:95:eDP-1] using preferred mode from EDID:
<7> [722.393194] [drm:drm_mode_debug_printmodeline] Modeline "2400x1600": 60 252750 2400 2448 2480 2560 1600 1603 1613 1646 0x48 0xa
<7> [722.393906] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] VBT doesn't support DRRS
<7> [722.394754] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] AUX Backlight Control Supported!
<6> [722.394881] i915 0000:00:02.0: [drm] Panel advertises DPCD backlight support, but VBT disagrees. If your backlight controls don't work try booting with i915.enable_dpcd_backlight=1. If your machine needs this, please file a _new_ bug report on drm/i915, see https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs for details.
<7> [722.396286] i915 0000:00:02.0: [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, disabled, brightness 0/100
<7> [722.401800] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (VBT)
<7> [722.402773] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:102:DDI B/PHY B]
<7> [722.407573] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:102:DDI B/PHY B]
<7> [722.408403] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT)
<7> [722.411079] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX C for port C (platform default)
<7> [722.411832] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI C/PHY C]
<7> [722.415018] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:118:DDI C/PHY C]
<7> [722.415703] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT)
<7> [722.418895] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled
<7> [722.419896] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled
<7> [722.420864] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled
<7> [722.421735] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A
<7> [722.422638] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A
<7> [722.423585] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A
<7> [722.424472] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B
<7> [722.425418] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B
<7> [722.426134] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B
<7> [722.426793] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C
<7> [722.427515] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C
<7> [722.428208] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C
<7> [722.428963] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: crtc_mask 0x00000000, on 1
<7> [722.429640] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: crtc_mask 0x00000000, on 0
<7> [722.430286] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0
<7> [722.431052] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0
<7> [722.431669] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI A/PHY A] hw state readout: disabled, pipe A
<7> [722.432480] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:102:DDI B/PHY B] hw state readout: disabled, pipe A
<7> [722.433061] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DP-MST A] hw state readout: disabled, pipe A
<7> [722.433746] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DP-MST B] hw state readout: disabled, pipe B
<7> [722.434652] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DP-MST C] hw state readout: disabled, pipe C
<7> [722.435389] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI C/PHY C] hw state readout: disabled, pipe A
<7> [722.436015] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST A] hw state readout: disabled, pipe A
<7> [722.436553] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST B] hw state readout: disabled, pipe B
<7> [722.437123] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DP-MST C] hw state readout: disabled, pipe C
<7> [722.438377] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:eDP-1] hw state readout: disabled
<7> [722.447828] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:103:DP-1] hw state readout: disabled
<7> [722.459437] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled
<7> [722.469331] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-2] hw state readout: disabled
<7> [722.474595] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:125:HDMI-A-2] hw state readout: disabled
<7> [722.479861] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz
<7> [722.485216] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz
<7> [722.490513] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz
<7> [722.504151] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] pipe A data rate 0 num active planes 0
<7> [722.509491] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz
<7> [722.514832] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz
<7> [722.520170] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz
<7> [722.525516] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] pipe B data rate 0 num active planes 0
<7> [722.530905] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz
<7> [722.536252] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz
<7> [722.550052] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz
<7> [722.555163] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] pipe C data rate 0 num active planes 0
<7> [722.560432] i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]
<7> [722.565657] i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]
<7> [722.571072] i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]
<7> [722.576435] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling
<7> [722.589941] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, 100000000]
<7> [722.614756] [drm:intel_engines_init [i915]] Initialized 5 engine workarounds on rcs'0
<7> [722.628146] [drm:intel_engines_init [i915]] Initialized 5 whitelist workarounds on rcs'0
<7> [722.633648] [drm:__intel_engine_init_ctx_wa [i915]] Initialized 14 context workarounds on rcs'0
<7> [722.657701] [drm:intel_engines_init [i915]] Initialized 1 engine workarounds on bcs'0
<7> [722.663006] [drm:intel_engines_init [i915]] Initialized 1 engine workarounds on vcs'0
<7> [722.672857] [drm:intel_engines_init [i915]] Initialized 1 engine workarounds on vecs'0
<7> [722.756857] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV
<7> [722.758994] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] pipe A not active or no fb, skipping
<7> [722.759715] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping
<7> [722.760528] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping
<7> [722.761325] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config
<7> [722.765538] [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0
<7> [722.766022] [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0
<7> [722.766454] [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0
<7> [722.767128] [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0
<7> [722.839219] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered
<7> [722.854456] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7> [722.884102] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1
<7> [722.923480] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2
<6> [722.952993] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
<7> [722.986132] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected
<6> [723.009100] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6> [723.022821] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input41
<7> [723.040817] i915 0000:00:02.0: [drm:intel_audio_init [i915]] init value of AUD_FREQ_CNTRL of 0x10
<7> [723.041549] [drm:drm_client_modeset_probe]
<7> [723.046366] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1]
<7> [723.047338] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:eDP-1]
<7> [723.053792] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] status updated from unknown to disconnected
<7> [723.053851] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:eDP-1] disconnected
<7> [723.053915] [drm:drm_connector_update_edid_property] [CONNECTOR:95:eDP-1] Edid was changed.
<7> [723.053975] [drm:drm_connector_update_edid_property] Updating change counter to 2
<7> [723.054127] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1]
<7> [723.054915] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-1]
<7> [723.061761] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] status updated from unknown to disconnected
<7> [723.068708] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI D IO power well
<7> [723.069789] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI C IO power well
<7> [723.070726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI B IO power well
<7> [723.070964] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-1] disconnected
<7> [723.071032] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1]
<7> [723.071799] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [723.072015] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected
<7> [723.072077] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [723.072147] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2]
<7> [723.072912] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]
<7> [723.073094] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] status updated from unknown to disconnected
<7> [723.073152] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-2] disconnected
<7> [723.073221] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:125:HDMI-A-2]
<7> [723.073990] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:125:HDMI-A-2]
<7> [723.074170] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:125:HDMI-A-2] status updated from unknown to disconnected
<7> [723.074228] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:125:HDMI-A-2] disconnected
<7> [723.074292] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [723.074444] [drm:drm_client_modeset_probe] connector 95 enabled? no
<7> [723.074495] [drm:drm_client_modeset_probe] connector 103 enabled? no
<7> [723.074546] [drm:drm_client_modeset_probe] connector 113 enabled? no
<7> [723.074596] [drm:drm_client_modeset_probe] connector 119 enabled? no
<7> [723.074670] [drm:drm_client_modeset_probe] connector 125 enabled? no
<7> [723.075084] [drm:drm_client_firmware_config.isra.10] Not using firmware configuration
<7> [723.089172] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well
<7> [723.089965] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling power well 2
<7> [723.091563] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [723.091873] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<7> [723.091932] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 1 primary plane
<7> [723.091987] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 2 primary plane
<6> [723.092036] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
<7> [723.094770] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
<7> [723.095547] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [723.096294] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [723.097025] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [723.097645] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:60:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
<7> [723.098398] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:60:plane 2B] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [723.099124] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:60:plane 2B] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [723.099744] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:60:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [723.110753] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
<7> [723.111554] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
<7> [723.112329] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [723.113061] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [723.113681] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [723.114420] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:73:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
<7> [723.115149] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:73:plane 1C] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [723.115766] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:73:plane 1C] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [723.116503] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:73:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [723.117231] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:81:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
<7> [723.117854] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:81:plane 2C] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [723.118593] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:81:plane 2C] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [723.125462] i915 device info: pciid=0x591e rev=0x02 platform=KABYLAKE (subplatform=0x2) gen=9
<7> [723.125498] i915 device info: gen: 9
<7> [723.125529] i915 device info: gt: 2
<7> [723.125560] i915 device info: iommu: enabled
<7> [723.125590] i915 device info: memory-regions: 5
<7> [723.125621] i915 device info: page-sizes: 11000
<7> [723.125651] i915 device info: platform: KABYLAKE
<7> [723.125682] i915 device info: ppgtt-size: 48
<7> [723.125713] i915 device info: ppgtt-type: 2
<7> [723.125745] i915 device info: dma_mask_size: 39
<7> [723.125775] i915 device info: is_mobile: no
<7> [723.125806] i915 device info: is_lp: no
<7> [723.125838] i915 device info: require_force_probe: no
<7> [723.125868] i915 device info: is_dgfx: no
<7> [723.125899] i915 device info: has_64bit_reloc: yes
<7> [723.125930] i915 device info: gpu_reset_clobbers_display: no
<7> [723.125961] i915 device info: has_reset_engine: yes
<7> [723.125991] i915 device info: has_fpga_dbg: yes
<7> [723.126022] i915 device info: has_global_mocs: no
<7> [723.126052] i915 device info: has_gt_uc: yes
<7> [723.126083] i915 device info: has_l3_dpf: no
<7> [723.126114] i915 device info: has_llc: yes
<7> [723.126145] i915 device info: has_logical_ring_contexts: yes
<7> [723.126176] i915 device info: has_logical_ring_elsq: no
<7> [723.126206] i915 device info: has_logical_ring_preemption: yes
<7> [723.126237] i915 device info: has_master_unit_irq: no
<7> [723.126268] i915 device info: has_pooled_eu: no
<7> [723.126298] i915 device info: has_rc6: yes
<7> [723.126409] i915 device info: has_rc6p: no
<7> [723.126440] i915 device info: has_rps: yes
<7> [723.126471] i915 device info: has_runtime_pm: yes
<7> [723.126502] i915 device info: has_snoop: no
<7> [723.126533] i915 device info: has_coherent_ggtt: yes
<7> [723.126564] i915 device info: unfenced_needs_alignment: no
<7> [723.126595] i915 device info: hws_needs_physical: no
<7> [723.126626] i915 device info: cursor_needs_physical: no
<7> [723.126657] i915 device info: has_csr: yes
<7> [723.126687] i915 device info: has_ddi: yes
<7> [723.126718] i915 device info: has_dp_mst: yes
<7> [723.126749] i915 device info: has_dsb: no
<7> [723.126779] i915 device info: has_dsc: no
<7> [723.126809] i915 device info: has_fbc: yes
<7> [723.126840] i915 device info: has_gmch: no
<7> [723.126871] i915 device info: has_hdcp: yes
<7> [723.126902] i915 device info: has_hotplug: yes
<7> [723.126933] i915 device info: has_hti: no
<7> [723.126964] i915 device info: has_ipc: yes
<7> [723.126995] i915 device info: has_modular_fia: no
<7> [723.127025] i915 device info: has_overlay: no
<7> [723.127056] i915 device info: has_psr: yes
<7> [723.127087] i915 device info: has_psr_hw_tracking: yes
<7> [723.127118] i915 device info: overlay_needs_physical: no
<7> [723.127148] i915 device info: supports_tv: no
<7> [723.127181] i915 device info: rawclk rate: 24000 kHz
<7> [723.127213] i915 device info: CS timestamp frequency: 12000000 Hz
<7> [723.127245] i915 device info: available engines: 47
<7> [723.127278] i915 device info: slice total: 1, mask=0001
<7> [723.127383] i915 device info: subslice total: 3
<7> [723.127418] i915 device info: slice0: 3 subslices, mask=00000007
<7> [723.127450] i915 device info: slice1: 0 subslices, mask=00000000
<7> [723.127483] i915 device info: slice2: 0 subslices, mask=00000000
<7> [723.127514] i915 device info: EU total: 24
<7> [723.127545] i915 device info: EU per subslice: 8
<7> [723.127575] i915 device info: has slice power gating: no
<7> [723.127606] i915 device info: has subslice power gating: no
<7> [723.127637] i915 device info: has EU power gating: yes
<6> [723.127670] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled
<6> [723.127702] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled
<6> [723.127734] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled
<6> [723.127777] i915: Performing live selftests with st_random_seed=0xb0798f64 st_timeout=500
<6> [723.127807] i915: Running gt_heartbeat
<6> [723.128011] i915: Running intel_heartbeat_live_selftests/live_idle_flush
<7> [723.155763] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:81:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [723.156591] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:89:cursor C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
<7> [723.157648] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:89:cursor C] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [723.158562] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:89:cursor C] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [723.159442] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:89:cursor C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<6> [723.164855] i915: Running intel_heartbeat_live_selftests/live_idle_pulse
<6> [723.174566] i915: Running intel_heartbeat_live_selftests/live_heartbeat_fast
<3> [723.181512] __live_heartbeat_fast:221 GEM_BUG_ON(engine->heartbeat.systole)