Skip to content

RKL : igt@i915_selftest@live@gt_timelines - dmesg_fail - i915/intel_timeline_live_selftests: live_hwsp_read failed with error -62

https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9402/re-rkl-1/igt@i915_selftest@live@gt_timelines.html#dmesg-warnings462

  • <6> [80.027580] [IGT] i915_selftest: starting dynamic subtest gt_timelines
  • <5> [80.103668] Setting dangerous option live_selftests - tainting kernel
  • <7> [80.135170] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] WOPCM: 2048K
  • <7> [80.135249] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] enable_guc=0 (guc:no submission:no huc:no)
  • <7> [80.135315] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Tiger Lake LP PCH
  • <7> [80.135370] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a
  • <7> [80.135872] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0001, instances: 0001
  • <7> [80.135908] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001
  • <7> [80.136058] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] rawclk rate: 24000 kHz
  • <7> [80.136097] i915 0000:00:02.0: [drm:intel_device_info_runtime_init [i915]] CS timestamp wraparound in 178241ms
  • <7> [80.136411] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
  • <7> [80.136447] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
  • <7> [80.136480] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M
  • <6> [80.136550] i915 0000:00:02.0: [drm] VT-d active for gfx access
  • <6> [80.136561] i915 0000:00:02.0: vgaarb: deactivate vga console
  • <7> [80.136873] i915 0000:00:02.0: [drm:init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x000000009f6000c7
  • <7> [80.136930] i915 0000:00:02.0: [drm:init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 30720K
  • <7> [80.136983] i915 0000:00:02.0: [drm:wa_init_mcr [i915]] L3 fuse = 0
  • <7> [80.137021] i915 0000:00:02.0: [drm:wa_init_mcr [i915]] MCR slice/subslice = 1000000
  • <7> [80.137067] [drm:i915_driver_probe [i915]] Initialized 1 GT workarounds on global
  • <7> [80.137237] i915 0000:00:02.0: [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params
  • <7> [80.137319] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x95ec6018
  • <7> [80.137387] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0
  • <7> [80.137432] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported
  • <7> [80.137482] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported
  • <7> [80.152366] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300583
  • <7> [80.152415] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported
  • <7> [80.152458] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported
  • <7> [80.152525] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA)
  • <7> [80.152563] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: DDR4
  • <7> [80.152599] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 64 Gb, width: X8, ranks: 1, 16Gb DIMMs: no
  • <7> [80.152631] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no
  • <7> [80.152662] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no
  • <7> [80.152694] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 64 Gb, width: X8, ranks: 1, 16Gb DIMMs: no
  • <7> [80.152723] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no
  • <7> [80.152752] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no
  • <7> [80.152780] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Memory configuration is symmetric? yes
  • <7> [80.152810] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM bandwidth: 42666672 kBps, channels: 2
  • <7> [80.152838] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM ranks: 1, 16Gb DIMMs: no
  • <7> [80.152921] i915 0000:00:02.0: [drm:icl_get_bw_info [i915]] QGV 0: DCLK=160 tRP=19 tRDPRE=10 tRAS=43 tRCD=19 tRC=62
  • <7> [80.152967] i915 0000:00:02.0: [drm:icl_get_bw_info [i915]] BW0 / QGV 0: num_planes=2 deratedbw=16168
  • <7> [80.153009] i915 0000:00:02.0: [drm:icl_get_bw_info [i915]] BW1 / QGV 0: num_planes=1 deratedbw=20000
  • <7> [80.153525] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
  • <7> [80.153578] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT TIGERLAKE ", BDB version 233
  • <7> [80.153628] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
  • <7> [80.153676] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
  • <7> [80.153724] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806
  • <7> [80.153775] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2
  • <7> [80.153826] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2
  • <7> [80.153877] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
  • <7> [80.158377] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)
  • <7> [80.158429] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Panel type: 2 (VBT)
  • <7> [80.158475] i915 0000:00:02.0: [drm:intel_bios_init [i915]] DRRS supported mode is seamless
  • <7> [80.158517] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
  • <7> [80.158558] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping
  • <7> [80.158598] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
  • <7> [80.158637] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0
  • <7> [80.158674] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT DP max link rate for port A: 810000
  • <7> [80.158712] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
  • <7> [80.158749] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 0
  • <7> [80.158786] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT DP max link rate for port B: 810000
  • <7> [80.158822] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
  • <7> [80.158858] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT HDMI level shift for port D: 0
  • <7> [80.158894] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT DP max link rate for port D: 810000
  • <7> [80.158930] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
  • <7> [80.158965] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT HDMI level shift for port E: 0
  • <7> [80.159000] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT DP max link rate for port E: 810000
  • <7> [80.159047] i915 0000:00:02.0: [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
  • <7> [80.159162] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
  • <7> [80.159239] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
  • <7> [80.159358] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
  • <7> [80.159462] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
  • <7> [80.159537] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling power well 1
  • <7> [80.159607] [drm:intel_dump_cdclk_config [i915]] Current CDCLK 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
  • <7> [80.159659] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
  • <7> [80.159768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
  • <7> [80.159808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC off
  • <7> [80.159850] i915 0000:00:02.0: [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
  • <7> [80.159949] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
  • <7> [80.160023] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
  • <7> [80.160099] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
  • <7> [80.160170] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
  • <7> [80.160209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling power well 3
  • <7> [80.160309] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling power well 4
  • <7> [80.160398] i915 0000:00:02.0: [drm:intel_csr_ucode_init [i915]] Loading i915/rkl_dmc_ver2_02.bin
  • <7> [80.160932] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
  • <6> [80.161403] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/rkl_dmc_ver2_02.bin (v2.2)
  • <7> [80.161457] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)
  • <7> [80.161494] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 22 (22.0 usec)
  • <7> [80.161527] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 22 (22.0 usec)
  • <7> [80.161559] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 22 (22.0 usec)
  • <7> [80.161589] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 32 (32.0 usec)
  • <7> [80.161619] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 72 (72.0 usec)
  • <7> [80.161649] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 97 (97.0 usec)
  • <7> [80.161679] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 101 (101.0 usec)
  • <7> [80.163375] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] 3 display pipes available.
  • <7> [80.164816] [drm:intel_dump_cdclk_config [i915]] Current CDCLK 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
  • <7> [80.164907] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind
  • <6> [80.164976] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
  • <7> [80.165025] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 648000 kHz
  • <7> [80.165073] i915 0000:00:02.0: [drm:intel_modeset_init_nogem [i915]] Max dotclock rate: 1296000 kHz
  • <7> [80.165453] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX A for port A (VBT)
  • <7> [80.165524] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:184:DDI A/PHY A]
  • <7> [80.165601] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX A
  • <7> [80.165748] [drm:intel_pps_dump_state [i915]] cur t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000
  • <7> [80.165804] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
  • <7> [80.165848] i915 0000:00:02.0: [drm:intel_dp_init_panel_power_sequencer [i915]] panel power up delay 200, power down delay 50, power cycle delay 600
  • <7> [80.165893] i915 0000:00:02.0: [drm:intel_dp_init_panel_power_sequencer [i915]] backlight on delay 1, off delay 200
  • <7> [80.166028] i915 0000:00:02.0: [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
  • <7> [80.166093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX A
  • <7> [80.166161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX A
  • <7> [80.166347] i915 0000:00:02.0: [drm:edp_panel_vdd_on [i915]] Turning [ENCODER:184:DDI A/PHY A] VDD on
  • <7> [80.166430] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
  • <7> [80.793642] i915 0000:00:02.0: [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000060
  • <7> [80.793788] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
  • <7> [80.794115] i915 0000:00:02.0: [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068
  • <7> [80.794253] i915 0000:00:02.0: [drm:edp_panel_vdd_on [i915]] [ENCODER:184:DDI A/PHY A] panel power wasn't enabled
  • <7> [81.002305] [drm:drm_dp_read_dpcd_caps] AUX A/DDI A/PHY A: DPCD: 14 00 c2 41 00 00 01 c0 02 00 00 00 00 0b 00
  • <7> [81.003176] [drm:drm_dp_read_desc] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
  • <7> [81.003970] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 f9 a7
  • <7> [81.004606] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3
  • <7> [81.005693] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported
  • <7> [81.007549] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  • <7> [81.007597] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] FEC CAPABILITY: 0
  • <7> [81.012653] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
  • <7> [81.012656] [drm:drm_add_display_info] non_desktop set to 0
  • <7> [81.012665] [drm:drm_add_edid_modes] ELD: no CEA Extension found
  • <7> [81.012667] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
  • <7> [81.012669] [drm:drm_add_display_info] non_desktop set to 0
  • <7> [81.012682] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
  • <7> [81.012684] [drm:drm_add_display_info] non_desktop set to 0
  • <7> [81.012694] [drm:drm_dp_get_edid_quirks] DP sink: EDID mfg 4d-10 prod-ID a7-14 quirks: 0x0000
  • <7> [81.012747] i915 0000:00:02.0: [drm:intel_panel_edid_fixed_mode [i915]] [CONNECTOR:185:eDP-1] using preferred mode from EDID:
  • <7> [81.012751] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 138500 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0xa
  • <7> [81.012803] i915 0000:00:02.0: [drm:intel_panel_edid_downclock_mode [i915]] [CONNECTOR:185:eDP-1] using downclock mode from EDID:
  • <7> [81.012806] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 30 69320 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0xa
  • <7> [81.012852] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] seamless DRRS supported for eDP panel.
  • <7> [81.012897] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] AUX Backlight Control Supported!
  • <6> [81.012899] i915 0000:00:02.0: [drm] Panel advertises DPCD backlight support, but VBT disagrees. If your backlight controls don't work try booting with i915.enable_dpcd_backlight=1. If your machine needs this, please file a new bug report on drm/i915, see https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs for details.
  • <7> [81.013027] i915 0000:00:02.0: [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, disabled, brightness 2824/120000
  • <7> [81.013177] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (platform default)
  • <7> [81.013236] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:192:DDI B/PHY B]
  • <7> [81.013323] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x2 for port B (VBT)
  • <7> [81.013572] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX D for port D (platform default)
  • <7> [81.013635] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:201:DDI TC1/PHY C]
  • <7> [81.013686] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x3 for port D (VBT)
  • <7> [81.013832] i915 0000:00:02.0: [drm:intel_bios_port_aux_ch [i915]] using AUX E for port E (VBT)
  • <7> [81.013896] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:205:DDI TC2/PHY D]
  • <7> [81.014177] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:205:DDI TC2/PHY D]
  • <7> [81.014216] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x9 for port E (VBT)
  • <7> [81.014465] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: disabled
  • <7> [81.014527] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled
  • <7> [81.014584] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled
  • <7> [81.014632] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A
  • <7> [81.014677] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A
  • <7> [81.014721] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A
  • <7> [81.014765] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A
  • <7> [81.014810] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A
  • <7> [81.014854] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A
  • <7> [81.014897] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B
  • <7> [81.014940] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B
  • <7> [81.014983] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B
  • <7> [81.015026] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B
  • <7> [81.015068] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B
  • <7> [81.015111] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B
  • <7> [81.015153] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C
  • <7> [81.015196] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C
  • <7> [81.015238] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C
  • <7> [81.015377] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C
  • <7> [81.015435] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C
  • <7> [81.015492] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C
  • <7> [81.015555] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: crtc_mask 0x00000000, on 0
  • <7> [81.015613] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: crtc_mask 0x00000000, on 0
  • <7> [81.015672] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: crtc_mask 0x00000000, on 0
  • <7> [81.015732] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:184:DDI A/PHY A] hw state readout: disabled, pipe A
  • <7> [81.015794] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:192:DDI B/PHY B] hw state readout: disabled, pipe A
  • <7> [81.015850] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:201:DDI TC1/PHY C] hw state readout: disabled, pipe A
  • <7> [81.015904] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:205:DDI TC2/PHY D] hw state readout: disabled, pipe A
  • <7> [81.015952] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:207:DP-MST A] hw state readout: disabled, pipe A
  • <7> [81.016000] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:208:DP-MST B] hw state readout: disabled, pipe B
  • <7> [81.016047] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:209:DP-MST C] hw state readout: disabled, pipe C
  • <7> [81.016130] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:185:eDP-1] hw state readout: disabled
  • <7> [81.016189] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:193:HDMI-A-1] hw state readout: disabled
  • <7> [81.016252] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:202:HDMI-A-2] hw state readout: disabled
  • <7> [81.016334] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:206:DP-1] hw state readout: disabled
  • <7> [81.016396] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:213:HDMI-A-3] hw state readout: disabled
  • <7> [81.016445] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz
  • <7> [81.016492] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz
  • <7> [81.016538] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz
  • <7> [81.016584] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz
  • <7> [81.016631] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz
  • <7> [81.016677] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz
  • <7> [81.016726] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] pipe A data rate 0 num active planes 0
  • <7> [81.016774] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz
  • <7> [81.016822] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz
  • <7> [81.016869] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz
  • <7> [81.016917] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz
  • <7> [81.016963] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz
  • <7> [81.017008] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz
  • <7> [81.017054] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] pipe B data rate 0 num active planes 0
  • <7> [81.017099] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz
  • <7> [81.017144] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz
  • <7> [81.017189] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz
  • <7> [81.017240] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz
  • <7> [81.017310] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz
  • <7> [81.017358] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz
  • <7> [81.017405] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] pipe C data rate 0 num active planes 0
  • <7> [81.052357] i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] [CRTC:80:pipe A] enable: no [setup_hw_state]
  • <7> [81.052406] i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state]
  • <7> [81.052449] i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state]
  • <7> [81.052804] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, 100000000]
  • <7> [81.183381] [drm:intel_engines_init [i915]] Initialized 8 engine workarounds on rcs'0
  • <7> [81.183424] [drm:intel_engines_init [i915]] Initialized 3 whitelist workarounds on rcs'0
  • <7> [81.183474] [drm:__intel_engine_init_ctx_wa [i915]] Initialized 3 context workarounds on rcs'0
  • <7> [81.184125] [drm:intel_engines_init [i915]] Initialized 1 whitelist workarounds on bcs'0
  • <7> [81.184405] [drm:intel_engines_init [i915]] Initialized 1 whitelist workarounds on vcs'0
  • <7> [81.184650] [drm:intel_engines_init [i915]] Initialized 1 whitelist workarounds on vecs'0
  • <7> [81.188916] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] pipe A not active or no fb, skipping
  • <7> [81.188963] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping
  • <7> [81.189005] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping
  • <7> [81.189045] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config
  • <7> [81.189529] [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0
  • <7> [81.189573] [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0
  • <7> [81.189617] [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0
  • <7> [81.189648] [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0
  • <7> [81.191421] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered
  • <7> [81.191513] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
  • <7> [81.192551] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC2/DDI TC2/PHY D bus for card0-DP-1
  • <6> [81.193049] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
  • <7> [81.194440] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected
  • <6> [81.208029] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
  • <6> [81.210827] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21
  • <7> [81.211678] i915 0000:00:02.0: [drm:intel_audio_init [i915]] init value of AUD_FREQ_CNTRL of 0x9010
  • <7> [81.211745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling power well 4
  • <7> [81.211749] [drm:drm_client_modeset_probe]
  • <7> [81.211787] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]
  • <7> [81.211833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling power well 3
  • <7> [81.211889] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
  • <7> [81.211893] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] status updated from unknown to disconnected
  • <7> [81.211963] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] disconnected
  • <7> [81.211970] [drm:drm_connector_update_edid_property] [CONNECTOR:185:eDP-1] Edid was changed.
  • <7> [81.211974] [drm:drm_connector_update_edid_property] Updating change counter to 2
  • <7> [81.211985] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:193:HDMI-A-1]
  • <7> [81.212039] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:193:HDMI-A-1]
  • <7> [81.212042] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:193:HDMI-A-1] status updated from unknown to disconnected
  • <7> [81.212050] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:193:HDMI-A-1] disconnected
  • <7> [81.212055] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:202:HDMI-A-2]
  • <7> [81.212103] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:202:HDMI-A-2]
  • <7> [81.212107] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:202:HDMI-A-2] status updated from unknown to disconnected
  • <7> [81.212156] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
  • <7> [81.212157] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:202:HDMI-A-2] disconnected
  • <7> [81.212166] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:206:DP-1]
  • <7> [81.212213] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:206:DP-1]
  • <7> [81.212215] i915 device info: pciid=0x4c8a rev=0x01 platform=ROCKETLAKE (subplatform=0x0) gen=12
  • <7> [81.212234] i915 device info: gen: 12
  • <7> [81.212237] i915 device info: gt: 0
  • <7> [81.212240] i915 device info: iommu: enabled
  • <7> [81.212244] i915 device info: memory-regions: 5
  • <7> [81.212247] i915 device info: page-sizes: 211000
  • <7> [81.212250] i915 device info: platform: ROCKETLAKE
  • <7> [81.212253] i915 device info: ppgtt-size: 48
  • <7> [81.212257] i915 device info: ppgtt-type: 2
  • <7> [81.212260] i915 device info: dma_mask_size: 39
  • <7> [81.212263] i915 device info: is_mobile: no
  • <7> [81.212266] i915 device info: is_lp: no
  • <7> [81.212269] i915 device info: require_force_probe: yes
  • <7> [81.212273] i915 device info: is_dgfx: no
  • <7> [81.212276] i915 device info: has_64bit_reloc: yes
  • <7> [81.212279] i915 device info: gpu_reset_clobbers_display: no
  • <7> [81.212282] i915 device info: has_reset_engine: yes
  • <7> [81.212286] i915 device info: has_fpga_dbg: yes
  • <7> [81.212289] i915 device info: has_global_mocs: yes
  • <7> [81.212292] i915 device info: has_gt_uc: yes
  • <7> [81.212295] i915 device info: has_l3_dpf: no
  • <7> [81.212298] i915 device info: has_llc: yes
  • <7> [81.212301] i915 device info: has_logical_ring_contexts: yes
  • <7> [81.212305] i915 device info: has_logical_ring_elsq: yes
  • <7> [81.212308] i915 device info: has_logical_ring_preemption: yes
  • <7> [81.212310] i915 device info: has_master_unit_irq: no
  • <7> [81.212313] i915 device info: has_pooled_eu: no
  • <7> [81.212315] i915 device info: has_rc6: yes
  • <7> [81.212318] i915 device info: has_rc6p: no
  • <7> [81.212321] i915 device info: has_rps: yes
  • <7> [81.212324] i915 device info: has_runtime_pm: yes
  • <7> [81.212326] i915 device info: has_snoop: no
  • <7> [81.212329] i915 device info: has_coherent_ggtt: no
  • <7> [81.212331] i915 device info: unfenced_needs_alignment: no
  • <7> [81.212334] i915 device info: hws_needs_physical: no
  • <7> [81.212337] i915 device info: cursor_needs_physical: no
  • <7> [81.212339] i915 device info: has_csr: yes
  • <7> [81.212342] i915 device info: has_ddi: yes
  • <7> [81.212345] i915 device info: has_dp_mst: yes
  • <7> [81.212347] i915 device info: has_dsb: yes
  • <7> [81.212350] i915 device info: has_dsc: yes
  • <7> [81.212353] i915 device info: has_fbc: yes
  • <7> [81.212355] i915 device info: has_gmch: no
  • <7> [81.212357] i915 device info: has_hdcp: yes
  • <7> [81.212360] i915 device info: has_hotplug: yes
  • <7> [81.212362] i915 device info: has_hti: yes
  • <7> [81.212365] i915 device info: has_ipc: yes
  • <7> [81.212368] i915 device info: has_modular_fia: no
  • <7> [81.212371] i915 device info: has_overlay: no
  • <7> [81.212373] i915 device info: has_psr: yes
  • <7> [81.212376] i915 device info: has_psr_hw_tracking: no
  • <7> [81.212378] i915 device info: overlay_needs_physical: no
  • <7> [81.212381] i915 device info: supports_tv: no
  • <7> [81.212385] i915 device info: rawclk rate: 24000 kHz
  • <7> [81.212388] i915 device info: CS timestamp frequency: 12000000 Hz
  • <7> [81.212392] i915 device info: available engines: 47
  • <7> [81.212396] i915 device info: slice total: 1, mask=0001
  • <7> [81.212399] i915 device info: subslice total: 2
  • <7> [81.212403] i915 device info: slice0: 2 subslices, mask=00000003
  • <7> [81.212406] i915 device info: EU total: 32
  • <7> [81.212410] i915 device info: EU per subslice: 16
  • <7> [81.212413] i915 device info: has slice power gating: yes
  • <7> [81.212418] i915 device info: has subslice power gating: no
  • <7> [81.212420] i915 device info: has EU power gating: no
  • <6> [81.212424] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled
  • <6> [81.212428] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled
  • <6> [81.212431] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled
  • <6> [81.212437] i915: Performing live selftests with st_random_seed=0xa349f5be st_timeout=500
  • <6> [81.212440] i915: Running gt_timelines
  • <6> [81.212512] i915: Running intel_timeline_live_selftests/live_hwsp_recycle
  • <7> [81.212528] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:206:DP-1] status updated from unknown to disconnected
  • <7> [81.212531] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:206:DP-1] disconnected
  • <7> [81.212534] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:213:HDMI-A-3]
  • <7> [81.212582] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:213:HDMI-A-3]
  • <7> [81.212585] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:213:HDMI-A-3] status updated from unknown to disconnected
  • <7> [81.212588] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:213:HDMI-A-3] disconnected
  • <7> [81.212591] [drm:drm_client_modeset_probe] No connectors reported connected with modes
  • <7> [81.212594] [drm:drm_client_modeset_probe] connector 185 enabled? no
  • <7> [81.212596] [drm:drm_client_modeset_probe] connector 193 enabled? no
  • <7> [81.212598] [drm:drm_client_modeset_probe] connector 202 enabled? no
  • <7> [81.212601] [drm:drm_client_modeset_probe] connector 206 enabled? no
  • <7> [81.212603] [drm:drm_client_modeset_probe] connector 213 enabled? no
  • <7> [81.212695] [drm:drm_client_firmware_config.isra.10] Not using firmware configuration
  • <7> [81.212703] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
  • <7> [81.212719] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
  • <7> [81.212722] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 1 primary plane
  • <7> [81.212725] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 2 primary plane
  • <6> [81.212727] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
  • <7> [81.213023] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:82:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
  • <7> [81.213059] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:82:plane 1B] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213093] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:82:plane 1B] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213125] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:82:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213155] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:91:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
  • <7> [81.213185] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:91:plane 2B] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213215] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:91:plane 2B] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213271] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:91:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213310] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:100:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
  • <7> [81.213348] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:100:plane 3B] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213390] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:100:plane 3B] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213420] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:100:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213451] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:109:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
  • <7> [81.213480] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:109:plane 4B] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213508] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:109:plane 4B] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213537] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:109:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213565] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:118:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
  • <7> [81.213594] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:118:plane 5B] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213623] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:118:plane 5B] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213651] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:118:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213679] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:127:cursor B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
  • <7> [81.213708] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:127:cursor B] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213738] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:127:cursor B] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213767] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:127:cursor B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213797] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:133:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
  • <7> [81.213826] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:133:plane 1C] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213855] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:133:plane 1C] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213885] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:133:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213914] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:142:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
  • <7> [81.213942] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:142:plane 2C] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213971] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:142:plane 2C] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.213999] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:142:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.214027] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:151:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
  • <7> [81.214055] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:151:plane 3C] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.214084] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:151:plane 3C] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.214112] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:151:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.214140] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:160:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
  • <7> [81.214168] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:160:plane 4C] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.214196] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:160:plane 4C] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.214225] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:160:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.214279] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:169:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
  • <7> [81.214318] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:169:plane 5C] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.214360] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:169:plane 5C] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.214397] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:169:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.214434] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:178:cursor C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm
  • <7> [81.214471] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:178:cursor C] lines 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.214508] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:178:cursor C] blocks 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.214545] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:178:cursor C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
  • <7> [81.214771] [drm:drm_client_modeset_probe]
  • <7> [81.214802] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]
  • <7> [81.214856] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
  • <7> [81.214860] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] disconnected
  • <7> [81.214864] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:193:HDMI-A-1]
  • <7> [81.214925] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:193:HDMI-A-1]
  • <7> [81.214929] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:193:HDMI-A-1] disconnected
  • <7> [81.214932] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:202:HDMI-A-2]
  • <7> [81.214979] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:202:HDMI-A-2]
  • <7> [81.214982] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:202:HDMI-A-2] disconnected
  • <7> [81.214985] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:206:DP-1]
  • <7> [81.215038] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:206:DP-1]
  • <7> [81.215043] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:206:DP-1] disconnected
  • <7> [81.215047] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:213:HDMI-A-3]
  • <7> [81.215091] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:213:HDMI-A-3]
  • <7> [81.215094] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:213:HDMI-A-3] disconnected
  • <7> [81.215098] [drm:drm_client_modeset_probe] No connectors reported connected with modes
  • <7> [81.215101] [drm:drm_client_modeset_probe] connector 185 enabled? no
  • <7> [81.215103] [drm:drm_client_modeset_probe] connector 193 enabled? no
  • <7> [81.215105] [drm:drm_client_modeset_probe] connector 202 enabled? no
  • <7> [81.215108] [drm:drm_client_modeset_probe] connector 206 enabled? no
  • <7> [81.215110] [drm:drm_client_modeset_probe] connector 213 enabled? no
  • <7> [81.215132] [drm:drm_client_firmware_config.isra.10] Not using firmware configuration
  • <7> [81.215140] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
  • <7> [81.215158] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
  • <7> [81.215162] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 1 primary plane
  • <7> [81.215166] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 2 primary plane
  • <6> [81.215170] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
  • <7> [81.215237] [drm:drm_client_modeset_probe]
  • <7> [81.215263] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1]
  • <7> [81.215310] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
  • <7> [81.215314] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:185:eDP-1] disconnected
  • <7> [81.215317] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:193:HDMI-A-1]
  • <7> [81.215363] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:193:HDMI-A-1]
  • <7> [81.215368] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:193:HDMI-A-1] disconnected
  • <7> [81.215372] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:202:HDMI-A-2]
  • <7> [81.215414] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:202:HDMI-A-2]
  • <7> [81.215418] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:202:HDMI-A-2] disconnected
  • <7> [81.215422] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:206:DP-1]
  • <7> [81.215473] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:206:DP-1]
  • <7> [81.215478] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:206:DP-1] disconnected
  • <7> [81.215482] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:213:HDMI-A-3]
  • <7> [81.215523] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:213:HDMI-A-3]
  • <7> [81.215528] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:213:HDMI-A-3] disconnected
  • <7> [81.215531] [drm:drm_client_modeset_probe] No connectors reported connected with modes
  • <7> [81.215533] [drm:drm_client_modeset_probe] connector 185 enabled? no
  • <7> [81.215535] [drm:drm_client_modeset_probe] connector 193 enabled? no
  • <7> [81.215537] [drm:drm_client_modeset_probe] connector 202 enabled? no
  • <7> [81.215540] [drm:drm_client_modeset_probe] connector 206 enabled? no
  • <7> [81.215542] [drm:drm_client_modeset_probe] connector 213 enabled? no
  • <7> [81.215560] [drm:drm_client_firmware_config.isra.10] Not using firmware configuration
  • <7> [81.215567] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
  • <7> [81.215581] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
  • <7> [81.215586] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 1 primary plane
  • <7> [81.215588] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 2 primary plane
  • <6> [81.215590] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
  • <6> [83.230391] i915: Running intel_timeline_live_selftests/live_hwsp_engine
  • <6> [83.835865] i915: Running intel_timeline_live_selftests/live_hwsp_alternate
  • <7> [84.057699] i915 0000:00:02.0: [drm:edp_panel_vdd_off_sync [i915]] Turning [ENCODER:184:DDI A/PHY A] VDD off
  • <7> [84.057986] i915 0000:00:02.0: [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
  • <7> [84.058054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX A
  • <7> [84.058117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC off
  • <7> [84.058167] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
  • <7> [84.058209] i915 0000:00:02.0: [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
  • <7> [84.119171] i915 0000:00:02.0: [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
  • <7> [84.119235] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:184:DDI A/PHY A] - long
  • <7> [84.119296] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
  • <7> [84.120442] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:184:DDI A/PHY A]
  • <6> [84.581560] i915: Running intel_timeline_live_selftests/live_hwsp_wrap
  • <6> [84.590358] i915: Running intel_timeline_live_selftests/live_hwsp_read
  • <6> [85.091943] rcs0: simulated 618 wraps
  • <6> [85.596333] bcs0: simulated 835 wraps
  • <6> [86.101322] vcs0: simulated 801 wraps
  • <3> [90.916342] i915/intel_timeline_live_selftests: live_hwsp_read failed with error -62
  • <7> [90.916491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC off
  • <7> [90.917149] i915 0000:00:02.0: [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
  • <7> [90.917324] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
  • <7> [90.917429] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
  • <7> [90.917624] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
  • <7> [90.917722] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
  • <7> [90.917789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling power well 3
  • <7> [90.917871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling power well 4
  • <7> [90.918007] intel_gt_set_wedged called from intel_gt_driver_unregister+0x19/0x50 [i915]
  • <7> [90.986014] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper
  • <7> [90.986348] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind
  • <7> [90.986467] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX A
  • <7> [90.986694] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX A
  • <7> [90.993133] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0x15/0x30 [i915]
  • <7> [91.070710] i915 Wakeref last acquired:
  • track_intel_runtime_pm_wakeref+0x14/0x90 [i915]
  • intel_display_power_get+0x1f/0x60 [i915]
  • intel_power_domains_init_hw+0xce/0x510 [i915]
  • intel_modeset_init_noirq+0x71/0x2e0 [i915]
  • i915_driver_probe+0x776/0xd90 [i915]
  • i915_pci_probe+0x43/0x1d0 [i915]
  • pci_device_probe+0x9e/0x110
  • really_probe+0x1c4/0x430
  • <7> [91.070714] i915 Wakeref count: 1
  • <7> [91.071028] i915 Wakeref x1 taken at:
  • track_intel_runtime_pm_wakeref+0x14/0x90 [i915]
  • intel_display_power_get+0x1f/0x60 [i915]
  • edp_panel_vdd_on+0xd5/0x220 [i915]
  • intel_dp_aux_xfer+0xf2/0x990 [i915]
  • intel_dp_aux_transfer+0xc5/0x2b0 [i915]
  • drm_dp_dpcd_access+0x76/0x110
  • drm_dp_dpcd_read+0xb1/0xf0
  • drm_dp_read_dpcd_caps+0x2b/0x120
  • <4> [91.073001] i915: probe of 0000:00:02.0 failed with error -62
To upload designs, you'll need to enable LFS and have an admin enable hashed storage. More information