<6> [843.359584] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0
<7> [843.359769] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [843.372878] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [843.373076] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [843.373457] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [843.373922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [843.374304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [843.374998] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [843.375341] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [843.375814] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [843.376237] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.
<7> [843.386121] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [843.386640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [843.389691] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [843.393102] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled
<7> [843.394447] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [843.395183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [843.395686] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:241:eDP-1]
<7> [843.396141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [843.396802] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [843.397667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [843.399656] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turning VDD on
<7> [843.400101] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 wait for panel power cycle
<7> [843.405024] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:82:pipe A]
<7> [843.961368] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7> [843.962163] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [843.962633] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068
<7> [843.963089] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 panel power wasn't enabled
<7> [843.995337] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [843.995696] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:240:DDI A/PHY A] - long
<7> [843.996030] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [843.996410] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:240:DDI A/PHY A]
<7> [844.170514] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [844.172438] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [844.172936] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [844.173344] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [844.173947] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:241:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [844.173964] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:241:eDP-1] ELD monitor
<7> [844.173973] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:241:eDP-1] ELD size 20, SAD count 0
<7> [844.174023] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] VRR capable: no
<7> [844.174390] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [844.176019] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [844.176427] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [844.177491] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:250:DP-1]
<7> [844.181899] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:262:HDMI-A-1]
<7> [844.186766] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:DP-2]
<7> [844.187193] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7> [844.187741] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:277:HDMI-A-2]
<7> [844.190756] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy)
<7> [844.195757] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-3]
<7> [844.196079] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7> [844.196824] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:134:pipe B]
<7> [844.196789] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-4]
<7> [844.197123] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt)
<7> [844.197603] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:186:pipe C]
<7> [844.197845] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:238:pipe D]
<7> [845.241117] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7> [845.241077] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected)
<7> [845.241309] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected)
<7> [845.241778] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7> [847.224998] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turning VDD off
<7> [847.225622] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7> [847.226256] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [847.226813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [847.227272] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [847.227691] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [847.227931] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [847.228234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [847.228496] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:240:DDI A/PHY A] - long
<7> [847.228741] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [847.228993] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [847.229482] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:240:DDI A/PHY A]
<7> [847.229785] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [847.230276] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT1: GUC: communication disabled
<7> [847.231100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00