configure: wrap PCI code with macro and set it at build time

--disable-pciaccess, used together with --disable-module-int10, can be used to
disable all pci code inside the server.

Note that XSERVER_LIBPCIACCESS was previously used only in the driver side and
now it defines also whether the library is used inside the server. Also,
XORG_BUS_PCI automake variable is introduced to track PCI code needs.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>

configure.ac

@@ -638,6 +638,7 @@ AC_ARG_ENABLE(int10-module,     AS_HELP_STRING([--enable-int10-module], [Build X
 AC_ARG_ENABLE(windowswm,      AS_HELP_STRING([--enable-windowswm], [Build XWin with WindowsWM extension (default: no)]), [WINDOWSWM=$enableval], [WINDOWSWM=no])
 AC_ARG_ENABLE(libdrm,         AS_HELP_STRING([--enable-libdrm], [Build Xorg with libdrm support (default: enabled)]), [DRM=$enableval],[DRM=yes])
 AC_ARG_ENABLE(clientids,      AS_HELP_STRING([--disable-clientids], [Build Xorg with client ID tracking (default: enabled)]), [CLIENTIDS=$enableval], [CLIENTIDS=yes])
+AC_ARG_ENABLE(pciaccess, AS_HELP_STRING([--enable-pciaccess], [Build Xorg with pciaccess library (default: enabled)]), [PCI=$enableval], [PCI=yes])
 
 dnl DDXes.
 AC_ARG_ENABLE(xorg,    	      AS_HELP_STRING([--enable-xorg], [Build Xorg server (default: auto)]), [XORG=$enableval], [XORG=auto])
@@ -1573,6 +1574,9 @@ if test "x$XORG" = xyes; then
 	xorg_bus_bsdpci=no
 	xorg_bus_sparc=no
 
+	AC_MSG_CHECKING([whether to build Xorg PCI functions])
+	if test "x$PCI" = xyes; then
+
 	PKG_CHECK_MODULES([PCIACCESS], $LIBPCIACCESS)
 	XORG_SYS_LIBS="$XORG_SYS_LIBS $PCIACCESS_LIBS $GLX_SYS_LIBS"
 	XORG_CFLAGS="$XORG_CFLAGS $PCIACCESS_CFLAGS"
@@ -1589,6 +1593,9 @@ if test "x$XORG" = xyes; then
 		xorg_bus_sparc="yes"
 		;;
 	esac
+	fi
+	AC_MSG_RESULT([$PCI])
+
 	dnl ===================================================================
 	dnl ==================== end of PCI configuration =====================
 	dnl ===================================================================
@@ -1768,6 +1775,7 @@ if test "x$XORG" = xyes; then
 	AC_SUBST([abi_extension])
 fi
 AM_CONDITIONAL([XORG], [test "x$XORG" = xyes])
+AM_CONDITIONAL([XORG_BUS_PCI], [test "x$PCI" = xyes])
 AM_CONDITIONAL([XORG_BUS_BSDPCI], [test "x$xorg_bus_bsdpci" = xyes])
 AM_CONDITIONAL([XORG_BUS_SPARC], [test "x$xorg_bus_sparc" = xyes])
 AM_CONDITIONAL([LINUX_ALPHA], [test "x$linux_alpha" = xyes])

hw/xfree86/common/Makefile.am

 noinst_LTLIBRARIES = libcommon.la
 
+if XORG_BUS_PCI
+PCI_SOURCES = xf86pciBus.c xf86VGAarbiter.c xf86VGAarbiter.h \
+              xf86VGAarbiterPriv.h
+endif
+
 if XORG_BUS_SPARC
 SBUS_SOURCES = xf86sbusBus.c
 endif
@@ -19,7 +24,7 @@ endif
 
 RANDRSOURCES = xf86RandR.c
 
-BUSSOURCES = xf86pciBus.c xf86fbBus.c xf86noBus.c $(SBUS_SOURCES)
+BUSSOURCES = xf86fbBus.c xf86noBus.c $(PCI_SOURCES) $(SBUS_SOURCES)
 
 MODEDEFSOURCES = $(srcdir)/vesamodes $(srcdir)/extramodes
 
@@ -33,7 +38,7 @@ AM_LDFLAGS = -r
 libcommon_la_SOURCES = xf86Configure.c xf86ShowOpts.c xf86Bus.c xf86Config.c \
                       xf86Cursor.c $(DGASOURCES) xf86DPMS.c \
                       xf86Events.c xf86Globals.c xf86AutoConfig.c \
-                      xf86Option.c xf86Init.c xf86VGAarbiter.c \
+                      xf86Option.c xf86Init.c \
                       xf86VidMode.c xf86fbman.c xf86cmap.c \
                       xf86Helper.c xf86PM.c xf86Xinput.c xisb.c \
                       xf86Mode.c xorgHelper.c \

hw/xfree86/common/xf86.h

@@ -92,6 +92,7 @@ extern _X_EXPORT Bool VTSwitchEnabled;	/* kbd driver */
 #ifndef _NO_XF86_PROTOTYPES
 
 /* PCI related */
+#ifdef XSERVER_LIBPCIACCESS
 #include <pciaccess.h>
 extern _X_EXPORT Bool pciSlotClaimed;
 
@@ -118,6 +119,15 @@ extern _X_EXPORT ScrnInfoPtr xf86ConfigPciEntity(ScrnInfoPtr pScrn,
 extern _X_EXPORT Bool xf86ConfigActivePciEntity(ScrnInfoPtr pScrn,
         int entityIndex,PciChipsets *p_chip, void *dummy, EntityProc init,
         EntityProc enter, EntityProc leave, pointer private);
+#else
+#define xf86VGAarbiterInit() do {} while (0)
+#define xf86VGAarbiterFini() do {} while (0)
+#define xf86VGAarbiterLock(x) do {} while (0)
+#define xf86VGAarbiterUnlock(x) do {} while (0)
+#define xf86VGAarbiterScrnInit(x) do {} while (0)
+#define xf86VGAarbiterDeviceDecodes() do {} while (0)
+#define xf86VGAarbiterWrapFunctions() do {} while (0)
+#endif
 
 /* xf86Bus.c */
 

hw/xfree86/common/xf86AutoConfig.c

@@ -255,9 +255,9 @@ listPossibleVideoDrivers(char *matches[], int nmatches)
 	    matches[i++] = xnfstrdup(sbusDriver);
     }
 #endif
-
+#ifdef XSERVER_LIBPCIACCESS
     i = xf86PciMatchDriver(matches, nmatches);
-
+#endif
     /* Fallback to platform default hardware */
     if (i < (nmatches - 1)) {
 #if defined(__i386__) || defined(__amd64__) || defined(__hurd__)

hw/xfree86/common/xf86Bus.c

@@ -47,8 +47,9 @@
 
 #define XF86_OS_PRIVS
 #include "xf86_OSproc.h"
+#ifdef XSERVER_LIBPCIACCESS
 #include "xf86VGAarbiter.h"
-
+#endif
 /* Entity data */
 EntityPtr *xf86Entities = NULL;	/* Bus slots claimed by drivers */
 int xf86NumEntities = 0;
@@ -75,7 +76,7 @@ Bool
 xf86CallDriverProbe( DriverPtr drv, Bool detect_only )
 {
     Bool     foundScreen = FALSE;
-
+#ifdef XSERVER_LIBPCIACCESS
     if (drv->PciProbe != NULL) {
         if (xf86DoConfigure && xf86DoConfigurePass1) {
             assert(detect_only);
@@ -86,7 +87,7 @@ xf86CallDriverProbe( DriverPtr drv, Bool detect_only )
             foundScreen = xf86PciProbeDev(drv);
         }
     }
-
+#endif
     if (!foundScreen && (drv->Probe != NULL)) {
         xf86Msg( X_WARNING, "Falling back to old probe method for %s\n",
                              drv->driverName);
@@ -195,7 +196,9 @@ xf86BusConfig(void)
 void
 xf86BusProbe(void)
 {
+#ifdef XSERVER_LIBPCIACCESS
     xf86PciProbe();
+#endif
 #if (defined(__sparc__) || defined(__sparc)) && !defined(__OpenBSD__)
     xf86SbusProbe();
 #endif
@@ -504,9 +507,14 @@ xf86PostProbe(void)
 {
     int i;
 
-    if (fbSlotClaimed && (pciSlotClaimed
+    if (fbSlotClaimed && (
 #if (defined(__sparc__) || defined(__sparc)) && !defined(__OpenBSD__)
-	    || sbusSlotClaimed
+	    sbusSlotClaimed ||
+#endif
+#ifdef XSERVER_LIBPCIACCESS
+	    pciSlotClaimed
+#else
+        TRUE
 #endif
 	    ))
 	    FatalError("Cannot run in framebuffer mode. Please specify busIDs "

hw/xfree86/common/xf86Config.c

@@ -2398,7 +2398,7 @@ xf86HandleConfigFile(Bool autoconfig)
     }
 
     xf86ProcessOptions(-1, xf86ConfigLayout.options, LayoutOptions);
-
+#ifdef XSERVER_LIBPCIACCESS
     if ((scanptr = xf86GetOptValString(LayoutOptions, LAYOUT_ISOLATEDEVICE))) {
        ; /* IsolateDevice specified; overrides SingleCard */
     } else {
@@ -2413,7 +2413,7 @@ xf86HandleConfigFile(Bool autoconfig)
        } else
            xf86PciIsolateDevice(scanptr);
     }
-
+#endif
     /* Now process everything else */
     if (!configServerFlags(xf86configptr->conf_flags,xf86ConfigLayout.options)){
              ErrorF ("Problem when converting the config data structures\n");

hw/xfree86/common/xf86Configure.c

@@ -87,9 +87,11 @@ xf86AddBusDeviceToConfigure(const char *driver, BusType bus, void *busData, int
     /* Check for duplicates */
     for (i = 0;  i < nDevToConfig;  i++) {
         switch (bus) {
+#ifdef XSERVER_LIBPCIACCESS
             case BUS_PCI:
                 ret = xf86PciConfigure(busData, DevToConfig[i].pVideo);
 	            break;
+#endif
 #if (defined(__sparc__) || defined(__sparc)) && !defined(__OpenBSD__)
             case BUS_SBUS:
                 ret = xf86SbusConfigure(busData, DevToConfig[i].sVideo);
@@ -118,10 +120,12 @@ xf86AddBusDeviceToConfigure(const char *driver, BusType bus, void *busData, int
     for (j = 0;  (DevToConfig[i].GDev.driver[j] = tolower(driver[j]));  j++);
 
     switch (bus) {
+#ifdef XSERVER_LIBPCIACCESS
         case BUS_PCI:
             xf86PciConfigureNewDev(busData, DevToConfig[i].pVideo,
                                    &DevToConfig[i].GDev, &chipset);
 	        break;
+#endif
 #if (defined(__sparc__) || defined(__sparc)) && !defined(__OpenBSD__)
         case BUS_SBUS:
             xf86SbusConfigureNewDev(busData, DevToConfig[i].sVideo,

hw/xfree86/common/xf86DPMS.c

@@ -42,8 +42,9 @@
 #include <X11/extensions/dpmsconst.h>
 #include "dpmsproc.h"
 #endif
+#ifdef XSERVER_LIBPCIACCESS
 #include "xf86VGAarbiter.h"
-
+#endif
 
 #ifdef DPMSExtension
 static DevPrivateKeyRec DPMSKeyRec;

hw/xfree86/common/xf86Init.c

@@ -78,7 +78,9 @@
 #include "picturestr.h"
 
 #include "xf86Bus.h"
+#ifdef XSERVER_LIBPCIACCESS
 #include "xf86VGAarbiter.h"
+#endif
 #include "globals.h"
 #include "xserver-properties.h"
 
@@ -88,7 +90,6 @@
 #endif
 #include <hotplug.h>
 
-
 #ifdef XF86PM
 void (*xf86OSPMClose)(void) = NULL;
 #endif
@@ -1355,6 +1356,7 @@ ddxProcessArgument(int argc, char **argv, int i)
     xf86DoShowOptions = TRUE;
     return 1;
   }
+#ifdef XSERVER_LIBPCIACCESS
   if (!strcmp(argv[i], "-isolateDevice"))
   {
     CHECK_FOR_REQUIRED_ARGUMENT();
@@ -1364,6 +1366,7 @@ ddxProcessArgument(int argc, char **argv, int i)
     xf86PciIsolateDevice(argv[i]);
     return 2;
   }
+#endif
   /* Notice cmdline xkbdir, but pass to dix as well */
   if (!strcmp(argv[i], "-xkbdir"))
   {
@@ -1432,7 +1435,9 @@ ddxUseMsg(void)
 #endif
   ErrorF("-allowMouseOpenFail    start server even if the mouse can't be initialized\n");
   ErrorF("-ignoreABI             make module ABI mismatches non-fatal\n");
+#ifdef XSERVER_LIBPCIACCESS
   ErrorF("-isolateDevice bus_id  restrict device resets to bus_id (PCI only)\n");
+#endif
   ErrorF("-version               show the server version\n");
   ErrorF("-showDefaultModulePath show the server default module path\n");
   ErrorF("-showDefaultLibPath    show the server default library path\n");

hw/xfree86/common/xf86fbBus.c

@@ -54,8 +54,10 @@ xf86ClaimFbSlot(DriverPtr drvp, int chipset, GDevPtr dev, Bool active)
     EntityPtr p;
     int num;
 
+#ifdef XSERVER_LIBPCIACCESS
     if (pciSlotClaimed)
 	return -1;
+#endif
 #if defined(__sparc__) || defined (__sparc64__)
     if (sbusSlotClaimed)
 	return -1;

hw/xfree86/common/xf86str.h

@@ -41,9 +41,6 @@
 #include "colormapst.h"
 #include "xf86Module.h"
 #include "xf86Opt.h"
-#include "xf86Pci.h"
-
-#include <pciaccess.h>
 
 /**
  * Integer type that is of the size of the addressable memory (machine size).
@@ -309,6 +306,8 @@ typedef struct {
 struct _SymTabRec;
 struct _PciChipsets;
 
+struct pci_device;
+
 typedef struct _DriverRec {
     int			driverVersion;
     char *		driverName;
@@ -350,8 +349,6 @@ typedef enum {
     BUS_last    /* Keep last */
 } BusType;
 
-struct pci_device;
-
 typedef struct {
     int		fbNum;
 } SbusBusId;

hw/xfree86/modes/xf86Cursors.c

@@ -33,6 +33,7 @@
 #include <string.h>
 #include <stdio.h>
 
+#include <X11/Xarch.h>
 #include "xf86.h"
 #include "xf86DDC.h"
 #include "xf86Crtc.h"

hw/xfree86/os-support/bus/Makefile.am

 noinst_LTLIBRARIES = libbus.la
 sdk_HEADERS = xf86Pci.h
 
-PCI_SOURCES = Pci.c Pci.h
+PCI_SOURCES =
+if XORG_BUS_PCI
+PCI_SOURCES += Pci.c Pci.h
+endif
 
 if XORG_BUS_BSDPCI
 PCI_SOURCES += bsd_pci.c

hw/xfree86/sdksyms.sh

@@ -120,14 +120,16 @@ cat > sdksyms.c << EOF
 #include "xf86.h"
 #include "xf86Module.h"
 #include "xf86Opt.h"
-#include "xf86PciInfo.h"
+#ifdef XSERVER_LIBPCIACCESS
+ #include "xf86PciInfo.h"
+ #include "xf86VGAarbiter.h"
+#endif
 #include "xf86Priv.h"
 #include "xf86Privstr.h"
 #include "xf86cmap.h"
 #include "xf86fbman.h"
 #include "xf86str.h"
 #include "xf86Xinput.h"
-#include "xf86VGAarbiter.h"
 #include "xisb.h"
 #if XV
 # include "xf86xv.h"
@@ -172,7 +174,9 @@ cat > sdksyms.c << EOF
 
 
 /* hw/xfree86/os-support/bus/Makefile.am */
-#include "xf86Pci.h"
+#ifdef XSERVER_LIBPCIACCESS
+# include "xf86Pci.h"
+#endif
 #if defined(__sparc__) || defined(__sparc)
 # include "xf86Sbus.h"
 #endif

include/xorg-config.h.in

@@ -127,4 +127,7 @@
 /* Build with libdrm support */
 #undef WITH_LIBDRM
 
+/* Use libpciaccess */
+#undef XSERVER_LIBPCIACCESS
+
 #endif /* _XORG_CONFIG_H_ */