diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 0dd85d2635b99804534267a85ee7967bc806e668..47d06af33747d0e135da78166bc155727a64779b 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -1131,7 +1131,10 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
struct cxacru_data *instance;
struct usb_device *usb_dev = interface_to_usbdev(intf);
struct usb_host_endpoint *cmd_ep = usb_dev->ep_in[CXACRU_EP_CMD];
- struct usb_endpoint_descriptor *in, *out;
+ static const u8 ep_addrs[] = {
+ CXACRU_EP_CMD + USB_DIR_IN,
+ CXACRU_EP_CMD + USB_DIR_OUT,
+ 0};
int ret;
/* instance init */
@@ -1179,13 +1182,11 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
}
if (usb_endpoint_xfer_int(&cmd_ep->desc))
- ret = usb_find_common_endpoints(intf->cur_altsetting,
- NULL, NULL, &in, &out);
+ ret = usb_check_int_endpoints(intf, ep_addrs);
else
- ret = usb_find_common_endpoints(intf->cur_altsetting,
- &in, &out, NULL, NULL);
+ ret = usb_check_bulk_endpoints(intf, ep_addrs);
- if (ret) {
+ if (!ret) {
usb_err(usbatm_instance, "cxacru_bind: interface has incorrect endpoints\n");
ret = -ENODEV;
goto fail;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index a76bb50b620267ae32def955c12f7dd581dde273..dcba4281ea48619acbc3456399f6509261a29c7f 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -6065,6 +6065,36 @@ void usb_hub_cleanup(void)
usb_deregister(&hub_driver);
} /* usb_hub_cleanup() */
+/**
+ * hub_hc_release_resources - clear resources used by host controller
+ * @udev: pointer to device being released
+ *
+ * Context: task context, might sleep
+ *
+ * Function releases the host controller resources in correct order before
+ * making any operation on resuming usb device. The host controller resources
+ * allocated for devices in tree should be released starting from the last
+ * usb device in tree toward the root hub. This function is used only during
+ * resuming device when usb device require reinitialization – that is, when
+ * flag udev->reset_resume is set.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ */
+static void hub_hc_release_resources(struct usb_device *udev)
+{
+ struct usb_hub *hub = usb_hub_to_struct_hub(udev);
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+ int i;
+
+ /* Release up resources for all children before this device */
+ for (i = 0; i < udev->maxchild; i++)
+ if (hub->ports[i]->child)
+ hub_hc_release_resources(hub->ports[i]->child);
+
+ if (hcd->driver->reset_device)
+ hcd->driver->reset_device(hcd, udev);
+}
+
/**
* usb_reset_and_verify_device - perform a USB port reset to reinitialize a device
* @udev: device to reset (not in SUSPENDED or NOTATTACHED state)
@@ -6129,6 +6159,9 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
bos = udev->bos;
udev->bos = NULL;
+ if (udev->reset_resume)
+ hub_hc_release_resources(udev);
+
mutex_lock(hcd->address0_mutex);
for (i = 0; i < PORT_INIT_TRIES; ++i) {
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index dfcfc142bd5e1c338e7a841b21eafd69e878e671..8efbacc5bc34110eb7abe111d4ca4f447a5bff7c 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -341,6 +341,10 @@ static const struct usb_device_id usb_quirk_list[] = {
{ USB_DEVICE(0x0638, 0x0a13), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
+ /* Prolific Single-LUN Mass Storage Card Reader */
+ { USB_DEVICE(0x067b, 0x2731), .driver_info = USB_QUIRK_DELAY_INIT |
+ USB_QUIRK_NO_LPM },
+
/* Saitek Cyborg Gold Joystick */
{ USB_DEVICE(0x06a3, 0x0006), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index dfa1b5fe48dc49567e91399b0c2c0e4aa595af52..66a08b5271653abd458f9ec85ca730afd7779d71 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -131,11 +131,24 @@ void dwc3_enable_susphy(struct dwc3 *dwc, bool enable)
}
}
-void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
+void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode, bool ignore_susphy)
{
+ unsigned int hw_mode;
u32 reg;
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+
+ /*
+ * For DRD controllers, GUSB3PIPECTL.SUSPENDENABLE and
+ * GUSB2PHYCFG.SUSPHY should be cleared during mode switching,
+ * and they can be set after core initialization.
+ */
+ hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+ if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD && !ignore_susphy) {
+ if (DWC3_GCTL_PRTCAP(reg) != mode)
+ dwc3_enable_susphy(dwc, false);
+ }
+
reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG));
reg |= DWC3_GCTL_PRTCAPDIR(mode);
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
@@ -216,7 +229,7 @@ static void __dwc3_set_mode(struct work_struct *work)
spin_lock_irqsave(&dwc->lock, flags);
- dwc3_set_prtcap(dwc, desired_dr_role);
+ dwc3_set_prtcap(dwc, desired_dr_role, false);
spin_unlock_irqrestore(&dwc->lock, flags);
@@ -658,16 +671,7 @@ static int dwc3_ss_phy_setup(struct dwc3 *dwc, int index)
*/
reg &= ~DWC3_GUSB3PIPECTL_UX_EXIT_PX;
- /*
- * Above DWC_usb3.0 1.94a, it is recommended to set
- * DWC3_GUSB3PIPECTL_SUSPHY to '0' during coreConsultant configuration.
- * So default value will be '0' when the core is reset. Application
- * needs to set it to '1' after the core initialization is completed.
- *
- * Similarly for DRD controllers, GUSB3PIPECTL.SUSPENDENABLE must be
- * cleared after power-on reset, and it can be set after core
- * initialization.
- */
+ /* Ensure the GUSB3PIPECTL.SUSPENDENABLE is cleared prior to phy init. */
reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
if (dwc->u2ss_inp3_quirk)
@@ -747,15 +751,7 @@ static int dwc3_hs_phy_setup(struct dwc3 *dwc, int index)
break;
}
- /*
- * Above DWC_usb3.0 1.94a, it is recommended to set
- * DWC3_GUSB2PHYCFG_SUSPHY to '0' during coreConsultant configuration.
- * So default value will be '0' when the core is reset. Application
- * needs to set it to '1' after the core initialization is completed.
- *
- * Similarly for DRD controllers, GUSB2PHYCFG.SUSPHY must be cleared
- * after power-on reset, and it can be set after core initialization.
- */
+ /* Ensure the GUSB2PHYCFG.SUSPHY is cleared prior to phy init. */
reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
if (dwc->dis_enblslpm_quirk)
@@ -830,6 +826,25 @@ static int dwc3_phy_init(struct dwc3 *dwc)
goto err_exit_usb3_phy;
}
+ /*
+ * Above DWC_usb3.0 1.94a, it is recommended to set
+ * DWC3_GUSB3PIPECTL_SUSPHY and DWC3_GUSB2PHYCFG_SUSPHY to '0' during
+ * coreConsultant configuration. So default value will be '0' when the
+ * core is reset. Application needs to set it to '1' after the core
+ * initialization is completed.
+ *
+ * Certain phy requires to be in P0 power state during initialization.
+ * Make sure GUSB3PIPECTL.SUSPENDENABLE and GUSB2PHYCFG.SUSPHY are clear
+ * prior to phy init to maintain in the P0 state.
+ *
+ * After phy initialization, some phy operations can only be executed
+ * while in lower P states. Ensure GUSB3PIPECTL.SUSPENDENABLE and
+ * GUSB2PHYCFG.SUSPHY are set soon after initialization to avoid
+ * blocking phy ops.
+ */
+ if (!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A))
+ dwc3_enable_susphy(dwc, true);
+
return 0;
err_exit_usb3_phy:
@@ -1588,7 +1603,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
switch (dwc->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
- dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
+ dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE, false);
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, false);
@@ -1600,7 +1615,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
return dev_err_probe(dev, ret, "failed to initialize gadget\n");
break;
case USB_DR_MODE_HOST:
- dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
+ dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST, false);
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, true);
@@ -1645,7 +1660,7 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc)
}
/* de-assert DRVVBUS for HOST and OTG mode */
- dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
+ dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE, true);
}
static void dwc3_get_software_properties(struct dwc3 *dwc)
@@ -1835,8 +1850,6 @@ static void dwc3_get_properties(struct dwc3 *dwc)
dwc->tx_thr_num_pkt_prd = tx_thr_num_pkt_prd;
dwc->tx_max_burst_prd = tx_max_burst_prd;
- dwc->imod_interval = 0;
-
dwc->tx_fifo_resize_max_num = tx_fifo_resize_max_num;
}
@@ -1854,21 +1867,19 @@ static void dwc3_check_params(struct dwc3 *dwc)
unsigned int hwparam_gen =
DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3);
- /* Check for proper value of imod_interval */
- if (dwc->imod_interval && !dwc3_has_imod(dwc)) {
- dev_warn(dwc->dev, "Interrupt moderation not supported\n");
- dwc->imod_interval = 0;
- }
-
/*
+ * Enable IMOD for all supporting controllers.
+ *
+ * Particularly, DWC_usb3 v3.00a must enable this feature for
+ * the following reason:
+ *
* Workaround for STAR 9000961433 which affects only version
* 3.00a of the DWC_usb3 core. This prevents the controller
* interrupt from being masked while handling events. IMOD
* allows us to work around this issue. Enable it for the
* affected version.
*/
- if (!dwc->imod_interval &&
- DWC3_VER_IS(DWC3, 300A))
+ if (dwc3_has_imod((dwc)))
dwc->imod_interval = 1;
/* Check the maximum_speed parameter */
@@ -2457,7 +2468,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
if (ret)
return ret;
- dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
+ dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE, true);
dwc3_gadget_resume(dwc);
break;
case DWC3_GCTL_PRTCAP_HOST:
@@ -2465,7 +2476,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
ret = dwc3_core_init_for_resume(dwc);
if (ret)
return ret;
- dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
+ dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST, true);
break;
}
/* Restore GUSB2PHYCFG bits that were modified in suspend */
@@ -2494,7 +2505,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
if (ret)
return ret;
- dwc3_set_prtcap(dwc, dwc->current_dr_role);
+ dwc3_set_prtcap(dwc, dwc->current_dr_role, true);
dwc3_otg_init(dwc);
if (dwc->current_otg_role == DWC3_OTG_ROLE_HOST) {
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index c955039bb4f6278da53b34cee6ad90e93b73c5b2..aaa39e663f60a5f4f638c91d9d369a5913d1b967 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1558,7 +1558,7 @@ struct dwc3_gadget_ep_cmd_params {
#define DWC3_HAS_OTG BIT(3)
/* prototypes */
-void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode);
+void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode, bool ignore_susphy);
void dwc3_set_mode(struct dwc3 *dwc, u32 mode);
u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type);
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index d76ae676783cf328902a16e259a730f8dfd8bad2..7977860932b142924edd19f859f7c4041d11eda6 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -173,7 +173,7 @@ void dwc3_otg_init(struct dwc3 *dwc)
* block "Initialize GCTL for OTG operation".
*/
/* GCTL.PrtCapDir=2'b11 */
- dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_OTG);
+ dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_OTG, true);
/* GUSB2PHYCFG0.SusPHY=0 */
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
@@ -556,7 +556,7 @@ int dwc3_drd_init(struct dwc3 *dwc)
dwc3_drd_update(dwc);
} else {
- dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_OTG);
+ dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_OTG, true);
/* use OTG block to get ID event */
irq = dwc3_otg_get_irq(dwc);
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index ddd6b2ce57107cb62c5cec02eae3fe3524164469..89a4dc8ebf948244a719f21cbbcce565cc1d8610 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -4501,14 +4501,18 @@ static irqreturn_t dwc3_process_event_buf(struct dwc3_event_buffer *evt)
dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0),
DWC3_GEVNTSIZ_SIZE(evt->length));
+ evt->flags &= ~DWC3_EVENT_PENDING;
+ /*
+ * Add an explicit write memory barrier to make sure that the update of
+ * clearing DWC3_EVENT_PENDING is observed in dwc3_check_event_buf()
+ */
+ wmb();
+
if (dwc->imod_interval) {
dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), DWC3_GEVNTCOUNT_EHB);
dwc3_writel(dwc->regs, DWC3_DEV_IMOD(0), dwc->imod_interval);
}
- /* Keep the clearing of DWC3_EVENT_PENDING at the end */
- evt->flags &= ~DWC3_EVENT_PENDING;
-
return ret;
}
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index bdda8c74602dea0771dfabfb079fc702b031acbc..869ad99afb48bbeed623224f1b5b5aebc1dce256 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1050,10 +1050,11 @@ static int set_config(struct usb_composite_dev *cdev,
else
usb_gadget_set_remote_wakeup(gadget, 0);
done:
- if (power <= USB_SELF_POWER_VBUS_MAX_DRAW)
- usb_gadget_set_selfpowered(gadget);
- else
+ if (power > USB_SELF_POWER_VBUS_MAX_DRAW ||
+ (c && !(c->bmAttributes & USB_CONFIG_ATT_SELFPOWER)))
usb_gadget_clear_selfpowered(gadget);
+ else
+ usb_gadget_set_selfpowered(gadget);
usb_gadget_vbus_draw(gadget, power);
if (result >= 0 && cdev->delayed_status)
@@ -2615,7 +2616,10 @@ void composite_suspend(struct usb_gadget *gadget)
cdev->suspended = 1;
- usb_gadget_set_selfpowered(gadget);
+ if (cdev->config &&
+ cdev->config->bmAttributes & USB_CONFIG_ATT_SELFPOWER)
+ usb_gadget_set_selfpowered(gadget);
+
usb_gadget_vbus_draw(gadget, 2);
}
@@ -2649,8 +2653,11 @@ void composite_resume(struct usb_gadget *gadget)
else
maxpower = min(maxpower, 900U);
- if (maxpower > USB_SELF_POWER_VBUS_MAX_DRAW)
+ if (maxpower > USB_SELF_POWER_VBUS_MAX_DRAW ||
+ !(cdev->config->bmAttributes & USB_CONFIG_ATT_SELFPOWER))
usb_gadget_clear_selfpowered(gadget);
+ else
+ usb_gadget_set_selfpowered(gadget);
usb_gadget_vbus_draw(gadget, maxpower);
} else {
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index 09e2838917e29401af6aeb8635b1a32c7dd9cf2a..f58590bf5e02f5f785cf5bdc287f5ce9c95e47c3 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -1052,8 +1052,8 @@ void gether_suspend(struct gether *link)
* There is a transfer in progress. So we trigger a remote
* wakeup to inform the host.
*/
- ether_wakeup_host(dev->port_usb);
- return;
+ if (!ether_wakeup_host(dev->port_usb))
+ return;
}
spin_lock_irqsave(&dev->lock, flags);
link->is_suspend = true;
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 9693464c052049e63f22f5b108eb9b4f0d87104e..69c278b64084b2a0cfcd7e092ad2c577886dbd07 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -12,6 +12,7 @@
#include <linux/slab.h>
#include <linux/unaligned.h>
#include <linux/bitfield.h>
+#include <linux/pci.h>
#include "xhci.h"
#include "xhci-trace.h"
@@ -770,9 +771,16 @@ static int xhci_exit_test_mode(struct xhci_hcd *xhci)
enum usb_link_tunnel_mode xhci_port_is_tunneled(struct xhci_hcd *xhci,
struct xhci_port *port)
{
+ struct usb_hcd *hcd;
void __iomem *base;
u32 offset;
+ /* Don't try and probe this capability for non-Intel hosts */
+ hcd = xhci_to_hcd(xhci);
+ if (!dev_is_pci(hcd->self.controller) ||
+ to_pci_dev(hcd->self.controller)->vendor != PCI_VENDOR_ID_INTEL)
+ return USB_LINK_UNKNOWN;
+
base = &xhci->cap_regs->hc_capbase;
offset = xhci_find_next_ext_cap(base, 0, XHCI_EXT_CAPS_INTEL_SPR_SHADOW);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 92703efda1f7b318f2f0c86d6427084fa8cab424..fdf0c1008225a2d540807b4727f840da71576b6a 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2437,7 +2437,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
* and our use of dma addresses in the trb_address_map radix tree needs
* TRB_SEGMENT_SIZE alignment, so we pick the greater alignment need.
*/
- if (xhci->quirks & XHCI_ZHAOXIN_TRB_FETCH)
+ if (xhci->quirks & XHCI_TRB_OVERFETCH)
+ /* Buggy HC prefetches beyond segment bounds - allocate dummy space at the end */
xhci->segment_pool = dma_pool_create("xHCI ring segments", dev,
TRB_SEGMENT_SIZE * 2, TRB_SEGMENT_SIZE * 2, xhci->page_size * 2);
else
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index ad0ff356f6fa0f3c2cb62e614b5e4f44486a577f..54460d11f7ee8120c03a9ab5603aab16c96a5073 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -38,6 +38,8 @@
#define PCI_DEVICE_ID_ETRON_EJ168 0x7023
#define PCI_DEVICE_ID_ETRON_EJ188 0x7052
+#define PCI_DEVICE_ID_VIA_VL805 0x3483
+
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31
#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI 0x9cb1
@@ -418,8 +420,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
pdev->device == 0x3432)
xhci->quirks |= XHCI_BROKEN_STREAMS;
- if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483)
+ if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == PCI_DEVICE_ID_VIA_VL805) {
xhci->quirks |= XHCI_LPM_SUPPORT;
+ xhci->quirks |= XHCI_TRB_OVERFETCH;
+ }
if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) {
@@ -467,11 +471,11 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
if (pdev->device == 0x9202) {
xhci->quirks |= XHCI_RESET_ON_RESUME;
- xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH;
+ xhci->quirks |= XHCI_TRB_OVERFETCH;
}
if (pdev->device == 0x9203)
- xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH;
+ xhci->quirks |= XHCI_TRB_OVERFETCH;
}
if (pdev->vendor == PCI_VENDOR_ID_CDNS &&
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 45653114ccd7fcc4a1c6872e749c660d4cab705f..1a90ebc8a30ea572eb9003824a0315a8a73230d5 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -780,8 +780,12 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci)
struct xhci_segment *seg;
ring = xhci->cmd_ring;
- xhci_for_each_ring_seg(ring->first_seg, seg)
+ xhci_for_each_ring_seg(ring->first_seg, seg) {
+ /* erase all TRBs before the link */
memset(seg->trbs, 0, sizeof(union xhci_trb) * (TRBS_PER_SEGMENT - 1));
+ /* clear link cycle bit */
+ seg->trbs[TRBS_PER_SEGMENT - 1].link.control &= cpu_to_le32(~TRB_CYCLE);
+ }
xhci_initialize_ring_info(ring);
/*
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 8c164340a2c35099cedd081558236df3b1b5d14c..779b01dee068f5cae88ba28a4d17ff976f4dce97 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1632,7 +1632,7 @@ struct xhci_hcd {
#define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42)
#define XHCI_SUSPEND_RESUME_CLKS BIT_ULL(43)
#define XHCI_RESET_TO_DEFAULT BIT_ULL(44)
-#define XHCI_ZHAOXIN_TRB_FETCH BIT_ULL(45)
+#define XHCI_TRB_OVERFETCH BIT_ULL(45)
#define XHCI_ZHAOXIN_HOST BIT_ULL(46)
#define XHCI_WRITE_64_HI_LO BIT_ULL(47)
#define XHCI_CDNS_SCTX_QUIRK BIT_ULL(48)
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index 935fc496fe94b6d97b2445c5f43ac33c5fa9911d..4b35ef216125c7681be6594962bf61d6b20ead43 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -312,8 +312,10 @@ static int usbhsc_clk_get(struct device *dev, struct usbhs_priv *priv)
priv->clks[1] = of_clk_get(dev_of_node(dev), 1);
if (PTR_ERR(priv->clks[1]) == -ENOENT)
priv->clks[1] = NULL;
- else if (IS_ERR(priv->clks[1]))
+ else if (IS_ERR(priv->clks[1])) {
+ clk_put(priv->clks[0]);
return PTR_ERR(priv->clks[1]);
+ }
return 0;
}
@@ -779,6 +781,8 @@ static void usbhs_remove(struct platform_device *pdev)
dev_dbg(&pdev->dev, "usb remove\n");
+ flush_delayed_work(&priv->notify_hotplug_work);
+
/* power off */
if (!usbhs_get_dparam(priv, runtime_pwctrl))
usbhsc_power_ctrl(priv, 0);
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 105132ae87acbcc33241bdb2b75601a60fbbd6f4..e8e5723f541226854656f00273dec572a45b9151 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -1094,7 +1094,7 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
goto usbhs_mod_gadget_probe_err_gpriv;
}
- gpriv->transceiver = usb_get_phy(USB_PHY_TYPE_UNDEFINED);
+ gpriv->transceiver = devm_usb_get_phy(dev, USB_PHY_TYPE_UNDEFINED);
dev_info(dev, "%stransceiver found\n",
!IS_ERR(gpriv->transceiver) ? "" : "no ");
diff --git a/drivers/usb/typec/tcpm/tcpci_rt1711h.c b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
index 64f6dd0dc66096f4577cf5f6c6425da8efa0ba14..88c50b984e8a3f3908c1f37e22c8a6f70c1529b7 100644
--- a/drivers/usb/typec/tcpm/tcpci_rt1711h.c
+++ b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
@@ -334,6 +334,11 @@ static int rt1711h_probe(struct i2c_client *client)
{
int ret;
struct rt1711h_chip *chip;
+ const u16 alert_mask = TCPC_ALERT_TX_SUCCESS | TCPC_ALERT_TX_DISCARDED |
+ TCPC_ALERT_TX_FAILED | TCPC_ALERT_RX_HARD_RST |
+ TCPC_ALERT_RX_STATUS | TCPC_ALERT_POWER_STATUS |
+ TCPC_ALERT_CC_STATUS | TCPC_ALERT_RX_BUF_OVF |
+ TCPC_ALERT_FAULT;
chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
if (!chip)
@@ -382,6 +387,12 @@ static int rt1711h_probe(struct i2c_client *client)
dev_name(chip->dev), chip);
if (ret < 0)
return ret;
+
+ /* Enable alert interrupts */
+ ret = rt1711h_write16(chip, TCPC_ALERT_MASK, alert_mask);
+ if (ret < 0)
+ return ret;
+
enable_irq_wake(client->irq);
return 0;
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index fcf499cc9458c0d12015a7e36e5f1ac448c3a431..2a2915b0a645ff14b4fa6af6a6de5fd1c1dcd41b 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -25,7 +25,7 @@
* difficult to estimate the time it takes for the system to process the command
* before it is actually passed to the PPM.
*/
-#define UCSI_TIMEOUT_MS 5000
+#define UCSI_TIMEOUT_MS 10000
/*
* UCSI_SWAP_TIMEOUT_MS - Timeout for role swap requests
@@ -1346,7 +1346,7 @@ static int ucsi_reset_ppm(struct ucsi *ucsi)
mutex_lock(&ucsi->ppm_lock);
- ret = ucsi->ops->read_cci(ucsi, &cci);
+ ret = ucsi->ops->poll_cci(ucsi, &cci);
if (ret < 0)
goto out;
@@ -1364,7 +1364,7 @@ static int ucsi_reset_ppm(struct ucsi *ucsi)
tmo = jiffies + msecs_to_jiffies(UCSI_TIMEOUT_MS);
do {
- ret = ucsi->ops->read_cci(ucsi, &cci);
+ ret = ucsi->ops->poll_cci(ucsi, &cci);
if (ret < 0)
goto out;
if (cci & UCSI_CCI_COMMAND_COMPLETE)
@@ -1393,7 +1393,7 @@ static int ucsi_reset_ppm(struct ucsi *ucsi)
/* Give the PPM time to process a reset before reading CCI */
msleep(20);
- ret = ucsi->ops->read_cci(ucsi, &cci);
+ ret = ucsi->ops->poll_cci(ucsi, &cci);
if (ret)
goto out;
@@ -1825,11 +1825,11 @@ static int ucsi_init(struct ucsi *ucsi)
err_unregister:
for (con = connector; con->port; con++) {
+ if (con->wq)
+ destroy_workqueue(con->wq);
ucsi_unregister_partner(con);
ucsi_unregister_altmodes(con, UCSI_RECIPIENT_CON);
ucsi_unregister_port_psy(con);
- if (con->wq)
- destroy_workqueue(con->wq);
usb_power_delivery_unregister_capabilities(con->port_sink_caps);
con->port_sink_caps = NULL;
@@ -1929,8 +1929,8 @@ struct ucsi *ucsi_create(struct device *dev, const struct ucsi_operations *ops)
struct ucsi *ucsi;
if (!ops ||
- !ops->read_version || !ops->read_cci || !ops->read_message_in ||
- !ops->sync_control || !ops->async_control)
+ !ops->read_version || !ops->read_cci || !ops->poll_cci ||
+ !ops->read_message_in || !ops->sync_control || !ops->async_control)
return ERR_PTR(-EINVAL);
ucsi = kzalloc(sizeof(*ucsi), GFP_KERNEL);
@@ -2013,10 +2013,6 @@ void ucsi_unregister(struct ucsi *ucsi)
for (i = 0; i < ucsi->cap.num_connectors; i++) {
cancel_work_sync(&ucsi->connector[i].work);
- ucsi_unregister_partner(&ucsi->connector[i]);
- ucsi_unregister_altmodes(&ucsi->connector[i],
- UCSI_RECIPIENT_CON);
- ucsi_unregister_port_psy(&ucsi->connector[i]);
if (ucsi->connector[i].wq) {
struct ucsi_work *uwork;
@@ -2032,6 +2028,11 @@ void ucsi_unregister(struct ucsi *ucsi)
destroy_workqueue(ucsi->connector[i].wq);
}
+ ucsi_unregister_partner(&ucsi->connector[i]);
+ ucsi_unregister_altmodes(&ucsi->connector[i],
+ UCSI_RECIPIENT_CON);
+ ucsi_unregister_port_psy(&ucsi->connector[i]);
+
usb_power_delivery_unregister_capabilities(ucsi->connector[i].port_sink_caps);
ucsi->connector[i].port_sink_caps = NULL;
usb_power_delivery_unregister_capabilities(ucsi->connector[i].port_source_caps);
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index 82735eb34f0e335c769799465bb40a8d40a75961..28780acc4af2e7e6b9730e7c0cf37dc72a363170 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -62,6 +62,7 @@ struct dentry;
* struct ucsi_operations - UCSI I/O operations
* @read_version: Read implemented UCSI version
* @read_cci: Read CCI register
+ * @poll_cci: Read CCI register while polling with notifications disabled
* @read_message_in: Read message data from UCSI
* @sync_control: Blocking control operation
* @async_control: Non-blocking control operation
@@ -76,6 +77,7 @@ struct dentry;
struct ucsi_operations {
int (*read_version)(struct ucsi *ucsi, u16 *version);
int (*read_cci)(struct ucsi *ucsi, u32 *cci);
+ int (*poll_cci)(struct ucsi *ucsi, u32 *cci);
int (*read_message_in)(struct ucsi *ucsi, void *val, size_t val_len);
int (*sync_control)(struct ucsi *ucsi, u64 command);
int (*async_control)(struct ucsi *ucsi, u64 command);
diff --git a/drivers/usb/typec/ucsi/ucsi_acpi.c b/drivers/usb/typec/ucsi/ucsi_acpi.c
index 5c55155519634d95b6e544632f869c2867093617..ac1ebb5d952720d2cd7620751a684c87a63f8fe1 100644
--- a/drivers/usb/typec/ucsi/ucsi_acpi.c
+++ b/drivers/usb/typec/ucsi/ucsi_acpi.c
@@ -59,19 +59,24 @@ static int ucsi_acpi_read_version(struct ucsi *ucsi, u16 *version)
static int ucsi_acpi_read_cci(struct ucsi *ucsi, u32 *cci)
{
struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi);
- int ret;
-
- if (UCSI_COMMAND(ua->cmd) == UCSI_PPM_RESET) {
- ret = ucsi_acpi_dsm(ua, UCSI_DSM_FUNC_READ);
- if (ret)
- return ret;
- }
memcpy(cci, ua->base + UCSI_CCI, sizeof(*cci));
return 0;
}
+static int ucsi_acpi_poll_cci(struct ucsi *ucsi, u32 *cci)
+{
+ struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi);
+ int ret;
+
+ ret = ucsi_acpi_dsm(ua, UCSI_DSM_FUNC_READ);
+ if (ret)
+ return ret;
+
+ return ucsi_acpi_read_cci(ucsi, cci);
+}
+
static int ucsi_acpi_read_message_in(struct ucsi *ucsi, void *val, size_t val_len)
{
struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi);
@@ -94,6 +99,7 @@ static int ucsi_acpi_async_control(struct ucsi *ucsi, u64 command)
static const struct ucsi_operations ucsi_acpi_ops = {
.read_version = ucsi_acpi_read_version,
.read_cci = ucsi_acpi_read_cci,
+ .poll_cci = ucsi_acpi_poll_cci,
.read_message_in = ucsi_acpi_read_message_in,
.sync_control = ucsi_sync_control_common,
.async_control = ucsi_acpi_async_control
@@ -142,6 +148,7 @@ static int ucsi_gram_sync_control(struct ucsi *ucsi, u64 command)
static const struct ucsi_operations ucsi_gram_ops = {
.read_version = ucsi_acpi_read_version,
.read_cci = ucsi_acpi_read_cci,
+ .poll_cci = ucsi_acpi_poll_cci,
.read_message_in = ucsi_gram_read_message_in,
.sync_control = ucsi_gram_sync_control,
.async_control = ucsi_acpi_async_control
diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
index 740171f24ef9fae9abdb52d7995abe692e0a7623..4b1668733a4bec4efad1b8aebca83e15a8c54fe3 100644
--- a/drivers/usb/typec/ucsi/ucsi_ccg.c
+++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
@@ -664,6 +664,7 @@ static int ucsi_ccg_sync_control(struct ucsi *ucsi, u64 command)
static const struct ucsi_operations ucsi_ccg_ops = {
.read_version = ucsi_ccg_read_version,
.read_cci = ucsi_ccg_read_cci,
+ .poll_cci = ucsi_ccg_read_cci,
.read_message_in = ucsi_ccg_read_message_in,
.sync_control = ucsi_ccg_sync_control,
.async_control = ucsi_ccg_async_control,
diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c
index fed39d45809050f1e08dc1d34008b5c561461391..8af79101a2fc75ae17be1d119b25a9c862e010b3 100644
--- a/drivers/usb/typec/ucsi/ucsi_glink.c
+++ b/drivers/usb/typec/ucsi/ucsi_glink.c
@@ -206,6 +206,7 @@ static void pmic_glink_ucsi_connector_status(struct ucsi_connector *con)
static const struct ucsi_operations pmic_glink_ucsi_ops = {
.read_version = pmic_glink_ucsi_read_version,
.read_cci = pmic_glink_ucsi_read_cci,
+ .poll_cci = pmic_glink_ucsi_read_cci,
.read_message_in = pmic_glink_ucsi_read_message_in,
.sync_control = ucsi_sync_control_common,
.async_control = pmic_glink_ucsi_async_control,
diff --git a/drivers/usb/typec/ucsi/ucsi_stm32g0.c b/drivers/usb/typec/ucsi/ucsi_stm32g0.c
index 6923fad31d795194a22db7633e1f8a56475142a0..57ef7d83a412113ce760ad056c48f8620e896b45 100644
--- a/drivers/usb/typec/ucsi/ucsi_stm32g0.c
+++ b/drivers/usb/typec/ucsi/ucsi_stm32g0.c
@@ -424,6 +424,7 @@ static irqreturn_t ucsi_stm32g0_irq_handler(int irq, void *data)
static const struct ucsi_operations ucsi_stm32g0_ops = {
.read_version = ucsi_stm32g0_read_version,
.read_cci = ucsi_stm32g0_read_cci,
+ .poll_cci = ucsi_stm32g0_read_cci,
.read_message_in = ucsi_stm32g0_read_message_in,
.sync_control = ucsi_sync_control_common,
.async_control = ucsi_stm32g0_async_control,
diff --git a/drivers/usb/typec/ucsi/ucsi_yoga_c630.c b/drivers/usb/typec/ucsi/ucsi_yoga_c630.c
index 4cae85c0dc12afa9e6955f77069b806cf827ee9a..d33e3f2dd1d80f7b49d9c5e7355fb14a97c74dd5 100644
--- a/drivers/usb/typec/ucsi/ucsi_yoga_c630.c
+++ b/drivers/usb/typec/ucsi/ucsi_yoga_c630.c
@@ -74,6 +74,7 @@ static int yoga_c630_ucsi_async_control(struct ucsi *ucsi, u64 command)
static const struct ucsi_operations yoga_c630_ucsi_ops = {
.read_version = yoga_c630_ucsi_read_version,
.read_cci = yoga_c630_ucsi_read_cci,
+ .poll_cci = yoga_c630_ucsi_read_cci,
.read_message_in = yoga_c630_ucsi_read_message_in,
.sync_control = ucsi_sync_control_common,
.async_control = yoga_c630_ucsi_async_control,