Commit 28da0154 authored by Thomas Haller's avatar Thomas Haller

all: drop trailing spaces

parent e4839acc
......@@ -921,7 +921,7 @@ Overview of changes since NetworkManager-0.4.1
default action.
* Fix icon animation smoothness
* Display more data in the Connection Information dialog
(Robert Love)
(Robert Love).
============================================
......
......@@ -19,7 +19,7 @@ The first is the largest obstacle, but ideally we implement this and enable it
when we have the required glib and libsoup versions available. One other
complication is that this checking should be done during the
NM_DEVICE_STATE_IP_CHECK phase (along with other operations like WiFi hotspot
auto-login) while the current checks are done globally in nm-manager.c, so
auto-login) while the current checks are done globally in nm-manager.c, so
keeping both code paths might be complex.
But ideally, once the device has successfully gotten an IPv4 or IPv6 address, it
......@@ -235,7 +235,7 @@ proceeds with the connection.
NM sends the correct wpa_supplicant config for WPS to the supplicant, and waits
for the connection to occur. WPS can only be used the *first* time, so after a
first successfull connection, NM must request the actual hexadecimal PSK from
first successfull connection, NM must request the actual hexadecimal PSK from
wpa_supplicant via D-Bus, and store that PSK in the connection, clear any WPS
PIN code from the connection, and save the connection to backing storage.
......
......@@ -524,7 +524,7 @@ nmc_count_color_escape_chars (const char *start, const char *end)
inside = TRUE;
if (inside)
num++;
if (*start == 'm')
if (*start == 'm')
inside = FALSE;
start++;
}
......
......@@ -304,7 +304,7 @@ adjust_border_for_allocation (NmtNewtSectionPrivate *priv,
label = nmt_newt_label_new (line_glyph);
g_ptr_array_add (priv->border_line_labels, label);
nmt_newt_grid_add (NMT_NEWT_GRID (priv->border_grid), label, 0, i + 1);
} else
} else
nmt_newt_widget_set_visible (priv->border_line_labels->pdata[i], TRUE);
}
nmt_newt_widget_set_visible (priv->border_end_label, TRUE);
......
......@@ -363,7 +363,7 @@ nmt_newt_widget_set_exit_on_activate (NmtNewtWidget *widget,
priv->exit_on_activate = exit_on_activate;
g_object_notify (G_OBJECT (widget), "exit-on-activate");
}
}
}
/**
* nmt_newt_widget_get_visible:
......
......@@ -70,7 +70,7 @@ typedef struct {
* Creates a new #NmtEditorGrid
*
* Returns: a new #NmtEditorGrid
*/
*/
NmtNewtWidget *
nmt_editor_grid_new (void)
{
......
......@@ -47,7 +47,7 @@
*
* When the async callback is invoked, it should call
* nmt_sync_op_complete_boolean() or nmt_sync_op_complete_pointer() to
* return a result or an error to the caller.
* return a result or an error to the caller.
*
* There is no free/clear function; any memory that needs to be freed
* will have been returned to the caller from
......
......@@ -131,7 +131,7 @@ function handle_generic_unquote(t, option, value)
end
function handle_number(t, option, value)
if not value[2] then io.stderr:write(string.format("Warning: ignoring invalid option '%s'\n", value[1])) return end
if not tonumber(value[2]) then
if not tonumber(value[2]) then
io.stderr:write(string.format("Warning: ignoring not numeric value '%s' for option '%s'\n", value[2], value[1]))
return
end
......
......@@ -79,7 +79,7 @@ show_access_point_info (NMAccessPoint *ap)
{
guint32 flags, wpa_flags, rsn_flags, freq, bitrate;
guint8 strength;
GBytes *ssid;
GBytes *ssid;
const char *hwaddr;
NM80211Mode mode;
char *freq_str, *ssid_str, *bitrate_str, *strength_str, *wpa_flags_str, *rsn_flags_str;
......@@ -158,7 +158,7 @@ show_wifi_device_info (NMDevice *device)
const char *iface;
const char *driver;
guint32 speed;
GBytes *active_ssid;
GBytes *active_ssid;
char *active_ssid_str = NULL;
int i;
......
......@@ -72,7 +72,7 @@ for d in devices:
print("============================")
print("Interface: %s" % props['Interface'])
try:
try:
devtype = devtypes[props['DeviceType']]
except KeyError:
devtype = "Unknown"
......
......@@ -22,7 +22,7 @@
# Update() method. The method replaces all previous settings with new ones
# including possible secrets.
# So, we get all settings using GetSettings() and then find out what secrets
# are associated with the connection using GetSecrets(), ask for new secret
# are associated with the connection using GetSecrets(), ask for new secret
# values, and add them to the settings that we pass to Update().
#
......@@ -104,7 +104,7 @@ con = find_connection(sys.argv[1])
print("Connection found: " + con_path)
if con:
# Obtain new secrets and put then into connection dict
# Obtain new secrets and put then into connection dict
change_secrets(con_path, con)
# Change the connection with Update()
......
......@@ -114,7 +114,7 @@ def activate_connection(connection_path, device_path):
iface = dbus.Interface(proxy, dbus_interface='org.freedesktop.NetworkManager')
iface.ActivateConnection('org.freedesktop.NetworkManager',
connection_path,
device_path,
device_path,
"/",
reply_handler=reply_handler,
error_handler=error_handler)
......
......@@ -23,7 +23,7 @@
# Sets NM logging level and/or domains (see description in 'man NetworkManager.conf')
# The level controls how verbose NM's log output will be (err,warn,info,debug).
# Domains control what parts of networking NM emits log messages for. Leaving
# either of the two arguments blank (i.e., an empty string) will leave that
# either of the two arguments blank (i.e., an empty string) will leave that
# parameter unchanged.
#
# The normal logging level is 'info', for debugging use 'debug'.
......
......@@ -590,7 +590,7 @@ typedef struct {
/* A table of keys that require further parsing/conversion because they are
* stored in a format that can't be automatically read using the key's type.
* i.e. IPv4 addresses, which are stored in NetworkManager as guint32, but are
* stored in keyfiles as strings, eg "10.1.1.2" or IPv6 addresses stored
* stored in keyfiles as strings, eg "10.1.1.2" or IPv6 addresses stored
* in struct in6_addr internally, but as string in keyfiles.
*/
static KeyWriter key_writers[] = {
......
......@@ -369,7 +369,7 @@ _libnm_glib_dbus_watcher (gpointer user_data)
/* Wait 3 seconds longer each time we fail to reconnect to dbus,
* with a maximum wait of one minute.
*/
ctx->dbus_watch_interval = MIN(ctx->dbus_watch_interval + 3000, 60000);
ctx->dbus_watch_interval = MIN(ctx->dbus_watch_interval + 3000, 60000);
/* Reschule ourselves if we _still_ don't have a connection to dbus */
_libnm_glib_schedule_dbus_watcher (ctx);
......
......@@ -300,7 +300,7 @@ nm_secret_agent_add_permission (NMSecretAgent *agent,
* @permission: The name of the permission to check for
*
* Returns whether or not the agent has the given permission.
*
*
* Returns: %TRUE if the agent has the given permission, %FALSE if it does not
* or if the permission was not previous recorded with
* nm_secret_agent_add_permission().
......
......@@ -1505,7 +1505,7 @@ check_writable (NMConnection *self, GError **error)
}
static void
get_settings_auth_cb (NMSettingsConnection *self,
get_settings_auth_cb (NMSettingsConnection *self,
GDBusMethodInvocation *context,
NMAuthSubject *subject,
GError *error,
......
......@@ -168,7 +168,7 @@ dump_blocks (void)
for (n = ifparser_getfirst (); n != NULL; n = n->next) {
if_data *m;
// each block start with its type & name
// each block start with its type & name
// (single quotes used to show typ & name baoundaries)
g_print("'%s' '%s'\n", n->type, n->name);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment