ChangeLog 86.1 KB
Newer Older
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
2004-11-03 Dan Williams <dcbw@redhat.com>

	* panel-applet/NMWirelessAppletOtherNetworkDialog.c,
		- Disable OK button until valid data is entered
			for encryption stuff too

	* panel-applet/NMWirelessApplet.c
		- Report card strength for current AP if the card
			doesn't report strength data for scanned access
			points

	* src/NetworkManagerDevice.c
		- Smooth out cards reported quality, Atmel card was
			intermittently reporting no quality data but soon
			recovers

	* src/NetworkManagerWireless.c
		- Better quality data percentage calculation.  Atmel
			cards (mine at least) seem to report the quality
			in percentage format already, so honor that

	Patch from <j@bootlab.org>
	* NetworkManager.h
	  info-daemon/NetworkManagerInfoPassphraseDialog.c
	  info-daemon/passphrase.glade
	  panel-applet/NMWirelessAppletOtherNetworkDialog.c
	  panel-applet/essid.glade
	  src/NetworkManagerAP.c
	  src/NetworkManagerDevice.c
	  src/NetworkManagerWireless.[ch]
		- Support ASCII WEP keys, in both 40/64 bit and 104/128 bit

33
34
35
36
37
38
39
2004-11-03 Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerDevice.[ch]
		- (nm_device_set_enc_key): Add parameter to set Authentication
			Mode (Open System, Shared Key, or None).  We're still using
			Shared Key for now though.

40
41
42
43
44
45
46
47
2004-11-02  Bryan Clark  <clarkbw@cvs.gnome.org>

	* panel-applet/menu-info.c: change from bold text to light
	colored, may cause problems with some themes, i've tested a lot
	and they seem fine. 

	* panel-applet/NMWirelessApplet.c: fix strength tooltip

48
49
50
51
52
53
54
55
2004-11-01  Colin Walters  <walters@verbum.org>

	* src/NetworkManagerWireless.h, src/NetworkManagerWireless.c
	(nm_wireless_128bit_key_from_passphrase): Add const.

	* src/NetworkManagerAP.h, src/NetworkManagerAP.c
	(nm_ap_set_enc_key_source): Add const.
	
56
57
58
59
2004-11-01  Colin Walters  <walters@verbum.org>

	* .cvsignore: Update.

60
61
62
63
64
65
66
67
68
69
70
71
2004-10-29 Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerDevice.c
		- (nm_device_wireless_network_exists): Actually use the encryption
			key we got from the applet when attempting to find a wireless network
		- Don't bring devices down so much since on some cards it triggers
			firmware hotplugs each time

	* src/NetworkManagerDbus.c
		- (nm_dbus_nm_set_active_device): free the passphrase we may have gotten
			from the caller

72
73
74
75
76
77
78
79
2004-10-29 Dan Williams <dcbw@redhat.com>

	* src/NetworkManager.c
		- (nm_hal_device_property_modified): unlock a locked active
			wireless device when a wired connection gets a link.
			(Means you'll switch to wired whenever you plug in no
			matter what).

80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
2004-10-29 Dan Williams <dcbw@redhat.com>

	* panel-applet/NMWirelessAppletOtherNetworksDialog.[ch]
		- New files, implement the "Other wireless network" dialog

	* panel-applet/NMWirelessApplet.c
		- Move "other wireless network" dialog to separate file

	* panel-applet/NMWirelessAppletDbus.[ch]
		- Take key and key_type paramaters for the set_device function

	* panel-applet/essid.glade
		- Add UI bits for encryption settings

	* src/NetworkManagerDbus.c
		- Retrieve key and key_type params for "setActiveDevice" method call
			and pass them on
		- unref AP returned from nm_device_get_best_ap() when needed

	* src/NetworkManagerDevice.c
		- (nm_device_get_best_ap): ref the ap before returning it
		- unref AP returned from nm_device_get_best_ap() when needed
		- (nm_device_activate_wireless): add "ap" parameter so we don't
			need to call nm_device_get_best_ap() here, it was pretty much
			redundant anyway
		- (AP_NEED_KEY): break second link check condition out into separate
			function, and fix segfault when ap->enc_key_source was NULL
		- (nm_device_find_and_use_essid): take key and key_type parameters and
			pass them along to nm_device_wireless_network_exists().  If the
			network does exist, set the passed-in key+key_type on the AP

	* src/NetworkManagerPolicy.c
		- unref AP returned from nm_device_get_best_ap() when needed

114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
2004-10-28 Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerUtils.c
		- (nm_spawn_process): Fix a potential dereference of NULL

	Patches from Peter Jones:

	* src/NetworkManagerDevice.c
		- (nm_device_test_wireless_extensions): Better check for
			wireless devices

	* src/NetworkManagerUtils.c
		- (nm_spawn_process): Pass in valid stdout and stderr so
			executed programs don't randomly SIGPIPE and fail
		- (nm_get_wired_driver_support_level): quash hal warning
			when checking for USB ethernet device

131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
2004-10-27 Dan Williams <dcbw@redhat.com>

	* info-daemon/NetworkManagerInfo.c
	  info-daemon/NetworkManagerInfoDbus.c
	  info-daemon/NetworkManagerInfoPassphraseDialog.c
	  panel-applet/NMWirelessApplet.c
		- Properly escape gconf keys

	* src/NetworkManager.c
		- remove unused variables

	* src/NetworkManagerAP.c
		- (nm_ap_new_from_ap): Don't redundantly set new APs
			refcount since it got set in nm_ap_new()

	* src/NetworkManagerAPList.c
		- (nm_ap_list_combine): Give up ownership of newly created
			access points to the ap list, fixes memleak

	* src/NetworkManagerDevice.c
		- Remove cached_ap_list4 member since its not really needed
		- (nm_device_wireless_network_exists): Try to get correct
			encryption status of a found AP if its already in our
			device list
		- (nm_device_do_normal_scan): Clean up scanning a bit, make
			memory allocs/deallocs a bit clearer and shorter-lived

158
159
160
161
162
163
2004-10-26 Ray Strode <rstrode@redhat.com>

	* panel-applet/NMWirelessApplet.c:
	  (custom_essid_item_selected):  kill some compiler
	warnings 

164
165
166
167
168
169
2004-10-26 John (J5) Palmieri <johnp@redhat.com>

	* info-daemon/NetworkManagerInfoDbus.c
		- (nmi_dbus_is_running): New function for determining if nmi is already running
		- (nmi_dbus_service_init): exit if another instance of nmi is already running

170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
2004-10-23 Dan Williams <dcbw@redhat.com>

	* info-daemon/NetworkManagerInfoDbus.c
		- Trap the "DeviceActivationFailed" signal

	* docs/NetworkManager DBUS API.txt
		- Add "DeviceActivationFailed" signal

	* panel-applet/NMWirelessAppletDbus.c
		- Quash the "NetworkManager service not available" message

	* src/NetworkManagerDbus.[ch]
		- Add the "DeviceActivationFailed" signal

	* src/NetworkManagerDevice.c
		- Add support for activation_failed flag
		- Fix deadlock where activation thread didn't clean itself up, making
			main thread still believe it was alive forever (didn't reset activation
			flags like activating, just_activated, etc when IP configuration
			failed)

	* src/NetworkManagerPolicy.c
		- Implement logic for DeviceActivationFailed signal, and when activation fails
			for wireless networks, try to fall back to some other access point

195
196
197
198
199
200
201
202
203
204
205
206
2004-10-23 Dan Williams <dcbw@redhat.com>

	* panel-applet/NMWirelessApplet.[ch]
		- Place the GtkMenuBar inside a GtkEventBox, and add the Event Box
			to the applet object, so we can get tooltips
		- Add tooltips (RH #136866)

	* src/NetworkManagerDevice.c
		- When trying to find a wireless network, try to connect with encryption
			turned on first, so that we can more accurately detect whether or not
			we need to use encryption for the actual association later on

207
208
209
210
211
212
213
2004-10-21 Dan Williams <dcbw@redhat.com>

	* Add some support for telling NetworkManagerInfo to tell the user
		that they are using a device that's not fully supported

	* Fix some assertions in debug messages due to null access point args

214
215
216
217
218
219
220
221
222
2004-10-21 Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerDevice.c
		- Don't try to activate/bring up/down unsupported
			devices

	* src/NetworkManagerUtils.c
		- Fix case of PCI ID checks for driver support levels

223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
2004-10-21 Dan Williams <dcbw@redhat.com>

	* NetworkManager.h
		- New file, now contains commonly used structures and bits
			for the dbus API of NetworkManager

	* Makefile.am
		- Deliver NetworkManager.h to ${includedir}/NetworkManager

	* src/NetworkManager.h
		- Rename -> src/NetworkManagerMain.c

	* Various fixups all around to use NetworkManager.h and new
		src/NetworkManagerMain.h, remove redundant bits that got
		moved into NetworkManager.h

	* src/NetworkManagerDevice.[ch]
	  src/NetworkManagerUtils.[ch]
	  src/NetworkManagerPolicy.c
	  src/NetworkManagerDbus.c
		- Whitelist wireless drivers, and blacklist some wired
			drivers.  Also blacklist cipsec and ethernet-over-usb
			devices at this time (RH #135722, RH #135648)
		- Don't leak unsupported devices out over dbus, or allow
			them to be set as the active device.  Skip over them
			during automatic device picking

	* test/nmclienttest.c
		- Clean up the dbus code a lot

253
254
255
256
Tue Oct 19 14:20:29 2004  Jonathan Blandford  <jrb@redhat.com>

	* configure.in: post release bump.

257
258
259
260
261
Tue Oct 19 14:19:24 2004  Jonathan Blandford  <jrb@redhat.com>

	* configure.in:
	* NEWS: Released NetworkManager-0.3.1

262
263
264
265
266
267
268
269
270
271
272
273
2004-10-18 Dan Williams <dcbw@redhat.com>

	Patches from Thom May:
	* test/nmtestdevices.c
		- Include <string.h>
	* src/backends/NetworkManagerDebian.c:
		- (nm_system_device_run_dhcp, nm_system_device_stop_dhcp)
			(nm_system_device_flush_routes, nm_system_device_flush_addresses)
			Move to using g_strdup_printf rather than arbitrary buffers
		- (nm_system_device_setup_static_ip4_config) Implement function.
		- (nm_system_kill_all_dhcp_daemons) Use killall -q rather than killall

274
275
276
277
278
279
280
281
282
283
284
2004-10-17 Dan Williams <dcbw@redhat.com>

	* info-daemon/NetworkManagerInfoDbus.c
		- Display name of network in the "network not found" dialog

	* panel-applet/NMWirelessAppletDbus.c
		- (nmwa_dbus_call_nm_method): new function replaces all other
			nmwa_dbus_get_[string|string_array|int|boolean] methods
		- nmwa_dbus_get_network_name() and nmwa_dbus_get_device_name()
			consolidated into nmwa_dbus_get_object_name()

285
286
287
288
289
290
291
2004-10-15 Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerDbus.c
	  info-daemon/NetworkManagerInfoDbus.c
		- Display an error dialog when the user tries to use an
			"Other wireless network" that's not found.

292
293
294
295
296
297
298
2004-10-15 Dan Williams <dcbw@redhat.com>

	* panel-applet/NMWirelessApplet.[ch]
		- Fix up corner cases in applet state, making it
			look more responsive.  Change state to "connecting" when
			the user is forcing a device too.

299
300
301
302
303
304
305
306
307
308
309
2004-10-15 Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerAPList.c
		- (nm_ap_list_update_network): Disown AP after the list takes ownership

	* src/NetworkManagerDbus.c
		- (nm_dbus_nm_set_active_device): Simplify the device setting logic

	* src/NetworkManagerDevice.c
		- Disown APs after the device's AP list takes ownership

310
311
312
313
314
315
316
317
318
319
320
2004-10-15 Dan Williams <dcbw@redhat.com>

	* panel-applet/NMWirelessApplet.c
		- Update our applet state from the GUI thread

	* panel-applet/NMWirelessAppletDbus.c
		- Greatly simplify the locking to make the GUI thread
			smoother.  Update a private copy of the device list
			and active device and only when done talking to
			NetworkManager turn it over to the GUI thread.

321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
2004-10-15 Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerAP.[ch]
		- Add "artificial" get/set functions, set for APs that
			aren't discovered as part of a scan but instead
			discovered by force-setting the ESSID

	* src/NetworkManagerDevice.[ch]
		- (nm_device_wireless_network_exists): pass back whether
			or not the discovered AP was encrypted.  Also, try
			falling back to encrypted mode on the card if unencrypted
			association doesn't work
		- (nm_device_find_and_use_essid): If the network requested
			did in fact exists, but it wasn't in our scan list, add
			an "artificial" entry for it.  Some Cisco cards don't
			see non-ESSID-broadcasting APs in their scan but can still
			associate with them if you know the ESSID, this works around
			that behavior
		- (nm_device_do_normal_scan): Carry "artificial" APs over from scan
			to scan if the card is currently associated with that AP

342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
2004-10-15 Dan Williams <dcbw@redhat.com>

	---- We have a website ----
	http://people.redhat.com/dcbw/NetworkManager

	Patch from Robert Paskowitz:
	* src/NetworkManager.c
		- (main): Make sure we are run as root
	* src/NetworkManagerDevice.c
		- Fix type in ad-hoc setting function

	Patch from Thom May:
	* src/backends/NetworkManagerDebian.c
		- Make Debian backend compile again

357
358
359
360
2004-10-14 Dan Williams <dcbw@redhat.com>

	* Tagged NetworkManager-0_3

Dan Williams's avatar
   
Dan Williams committed
361
362
363
364
365
366
367
368
369
370
371
372
373
374
2004-10-14 Dan Williams <dcbw@redhat.com>

	Patch from Robert Paskowitz:
	* NEWS
	  src/NetworkManagerDevice.[ch]
	  src/backends/NetworkManagerDebian.c
	  src/backends/NetworkManagerGentoo.c
	  src/backends/NetworkManagerRedHat.c
	  src/backends/NetworkManagerSlackware.c
		- Add support for grabbing and using a broadcast address
			from system config files
		- Some Gentoo backend fixes for grabbing network config
		- Fix LOG_WARN->LOG_WARNING

375
376
377
378
2004-10-14 Dan Williams <dcbw@redhat.com>

	* NEWS: a few small fixes in the credits

379
380
381
382
Thu Oct 14 19:12:58 2004  Jonathan Blandford  <jrb@redhat.com>

	* NEWS: prep for release.

383
384
385
386
387
Thu Oct 14 16:47:12 2004  Jonathan Blandford  <jrb@redhat.com>

	* panel-applet/NMWirelessAppletDbus.c
	(nmwa_dbus_update_device_wireless_networks): remove warnings.

388
389
390
391
392
393
394
395
Thu Oct 14 16:40:39 2004  Jonathan Blandford  <jrb@redhat.com>

	* panel-applet/NMWirelessApplet.c (animation_timeout): Make
	applet->state == APPLET_STATE_NO_NM animation.

	* panel-applet/NMWirelessApplet.c (custom_essid_item_selected):
	set the text correctly.

396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
2004-10-14 Dan Williams <dcbw@redhat.com>

	* src/NetworkManager.c
		- Only accept and manager 802.3 and 802.11 devices

	* src/NetworkManagerDbus.[ch]
		- (nm_dbus_nm_set_active_device): move most of the actual activation
			logic into NetworkManagerDevice.c
		- (nm_dbus_network_status_from_data): new function
		- (nm_dbus_signal_network_status_change): new function, unused for now
		- (nm_dbus_nm_message_handler): use nm_dbus_network_status_from_data () now

	* src/NetworkManagerDevice.[ch]
		- (nm_device_find_and_use_essid): new function.  Search for, and if found use,
			a random ESSID.

412
413
414
415
416
2004-10-14 John (J5) Palmieri <johnp@redhat.com>

	* info-daemon/NetworkManagerInfo.c 
		- (main): Added session management

417
418
419
420
421
422
423
424
425
426
427
2004-10-14 Dan Williams <dcbw@redhat.com>

	* panel-applet/NMWirelessAppletDbus.[ch]
		- Expose network_device_[un]ref()
		- Expose wireless_network_[un]ref()
		- (wireless_network_new_with_essid): new function, create and return
			a wireless network with a particular essid

	* panel-applet/NMWirelessApplet.c
		- Hook up the "other network" dialog to do something

428
429
430
431
432
433
434
435
Wed Oct 13 19:31:53 2004  Jonathan Blandford  <jrb@redhat.com>

	* panel-applet/NMWirelessApplet.c: Add an essid dialog.  It
	doesn't work yet, but it looks okay.

	* panel-applet/icons/*png: Resize to 22x22 and install in the
	right place.

436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
2004-10-13 Dan Williams <dcbw@redhat.com>

	* panel-applet/NMWirelessApplet.c
		- Add function to print out applet_state in a readable
			manner

	* src/NetworkManager.c
		- (main): Don't segfault when nm_dbus_init() fails, we had
			a left-over call to hal_shutdown() into which we passed NULL

	* src/NetworkManagerAP.c
		- (nm_ap_set_essid): Allow NULL essids

	* src/NetworkManagerAPList.[ch]
		- More use of nm_ap_list_[un]lock ()
		- (nm_ap_list_get_ap_by_essid): don't warn when looking for a NULL
			network/essid, just return nothing.  Also skip over NULL
			essid access points in the list when searching
		- (nm_ap_list_get_ap_by_address): new function
		- (nm_ap_list_update_network): set the access point's key source to
			NULL when the key returned from NetworkManagerInfo is NULL or
			of 0 length
		- nm_ap_list_update_keys() -> nm_ap_list_update_properties(), and
			copy timestamp over too
		- (nm_ap_list_copy_essids_by_address): new function, attempt to
			find the correct ESSID for a blank-essid access point by searching
			through another list and matching access point MAC addresses
		- (nm_ap_list_diff): exclude blank-essid access points from the diffs

	* src/NetworkManagerDbus.c
		- (nm_dbus_nm_set_active_device): deal with random networks the user
			may specify.  This is mainly for access points that don't
			broadcast their essid.  So if the user tells us to associate with
			some random ESSID that's not in our access point list, we find
			out if the access point does in fact exist (by attempting association
			and then matching that access point's MAC address with the essid the
			user gave us) and then we switch to it.
		- (nm_dbus_devices_handle_request): don't add blank-essid access points
			to the returned list of networks for the "getNetworks" method

	* src/NetworkManagerDevice.[ch]
		- Extra debugging info for link detection
		- (nm_device_ap_list_get_ap_by_address): new function, return an AP
			based on MAC address
		- (nm_device_get_path_for_ap): ignore blank-essid access points
		- (nm_device_wireless_network_exists): new function, find out whether
			a random ESSID exists by attempting to associate with it
		- (nm_device_do_normal_scan): allow blank-essid access points in our
			device list as long as they have an AP MAC address we can use.
			Also send WirelessNetwork[Dis]Appeared signals for non-active
			devices too.  Lets the applet update more frequently.

	* src/backends/NetworkManagerGentoo.c
		- Patch from: Robert Paskowitz
			- Update backend code for Gentoo
			- Implement nm_system_device_update_config_info ()

	* test/nmclienttest.c
		- (set_network_device): new function, takes a command-line argument
			and tells NetworkManager to use that wireless network

497
498
499
500
501
Wed Oct 13 John (J5) Palmieri <johnp@redhat.com>

	* info-daemon/NetworkManagerInfo.c (nmi_spawn_notification_icon): Stop respawning
	if the notification icon crashes 5 times within 5 seconds of each respawn 

502
503
504
505
506
Tue Oct 12 22:53:04 2004  Jonathan Blandford  <jrb@redhat.com>

	* panel-applet/NMWirelessApplet.c (nmwa_update_state): remove
	g_print.

507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
Tue Oct 12 22:44:15 2004  Jonathan Blandford  <jrb@redhat.com>

	* panel-applet/NMWirelessApplet.h: Change the name of the icons.

	* panel-applet/NMWirelessApplet.c: (animation_timeout),
	(nmwa_update_state), (nmwa_destroy), (nmwa_setup_widgets),
	(nmwa_icons_free), (nmwa_icons_load_from_disk), (nmwa_icons_init):
	Change the name of the icons.

	* panel-applet/menu-info.c: (nm_menu_wired_class_init),
	(nm_menu_wired_expose_event), (nm_menu_network_class_init),
	(nm_menu_wireless_class_init), (nm_menu_wireless_new),
	(nm_menu_wireless_expose_event): Really bad hack to get the style
	to draw in the right color.

522
523
524
525
526
Tue Oct 12 John (J5) Palmieri <johnp@redhat.com>

	* info-daemon/NetworkManagerInfo.c (main):  Add child watch to respawn
	Notification if it crashes

527
528
529
530
531
532
533
534
535
536
537
Fri Oct  8 07:19:55 2004  Jonathan Blandford  <jrb@redhat.com>

	* panel-applet/NMWirelessAppletDbus.c (nmwa_dbus_get_double): 
	(nmwa_dbus_get_string): remove unused functions

	* panel-applet/NMWirelessApplet.c (nmwa_about_cb):
	(nmwa_cancel_timeout), (nmwa_get_menu_pos), (nmwa_factory):
	remove unused functions

	* panel-applet/NMWirelessApplet.c: Rewrite icon code.

538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
2004-10-12 Dan Williams <dcbw@redhat.com>

	* panel-applet/NMWirelessAppletDbus.c
		- New functions:
			wireless_network_new
			wireless_network_copy
			network_device_new
			network_device_copy

	* src/NetworkManagerDevice.[ch]
		- New functions:
			nm_device_set_mode_managed
			nm_device_set_mode_adhoc
		- Use these functions where appropriate
		- When creating a new wireless device, force the card
			to managed/Infrastructure mode as soon as possible

555
556
557
558
559
2004-10-12 Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerDevice.c
		- Force wireless cards into Infrastructure mode before we use them

560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
2004-10-12 Dan Williams <dcbw@redhat.com>

	* TODO
		- Remove bit about static IP address support

	* src/NetworkManagerUtils.c
		- (nm_spawn_process): Add some error reporting

	* src/NetworkManagerDevice.c
		- (nm_device_activation_configure_ip): hook up to the static config
			routines in the backends

	* src/backends/NetworkManagerRedHat.c
		- (nm_system_device_update_config_info): use shvar.c routines to
			parse the config file iformation, not our own
		- (nm_system_device_setup_static_ip4_config): new function, based
			heavily on 'ifup' script and 'ipcalc' tool code.  Set up a device
			with a static IP address and gateway

	* src/backends/shvar.[ch]
		- Parser (filched from initscripts package) for ifcfg-* files

	* src/backends/NetworkManagerSystem.h
	  src/backends/NetworkManagerGentoo.c
	  src/backends/NetworkManagerDebian.c
	  src/backends/NetworkManagerSlackware.c
		- Stub nm_system_device_update_config_info() and nm_system_device_setup_static_ip4_config()

588
589
590
591
592
2004-10-11 Dan Williams <dcbw@redhat.com>

	* TODO
		- Remove bit about more robust AP diffing since I just implemented it

593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
2004-10-11 Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerAP.c
		- (nm_ap_new, nm_ap_new_from_ap): Don't crash when we don't have
			enough RAM to allocate new AP structures, but return NULL instead

	* src/NetworkManagerAPList.[ch]
		- (nm_ap_list_is_empty): new function
		- (nm_ap_list_combine): new function, combine two access point lists
		- (nm_ap_list_copy_keys): new function, copy keys from one list
			into another

	* src/NetworkManagerDevice.[ch]
		- Rename some functions to be clearer:
			nm_device_get_best_ap_frozen -> nm_device_is_best_ap_frozen
			nm_device_just_activated     -> nm_device_is_just_activated
			nm_device_activating         -> nm_device_is_activating
			nm_device_now_scanning       -> nm_device_is_scanning
		- Cache the last 4 scans so that the access point list is more stable.
			We combine the lastest two scans and use that as the AP list,
			and diff that combined list against the combination of the earliest
			two cached scans for the WirelessNetworkAppeared/Dissappeared signals

616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
2004-10-08 John (J5) Palmieri <johnp@redhat.com>

	* info-daemon/NWManagerInfo.h
		- (struct NetworkManagerInfo): add shutdown_timeout GSource

	* info-daemon/NWManagerInfoDbus.c
		- (shutdown_callback): new function
		- (nmi_dbus_filter): Create a 30 second timeout until shutdown
			if NetworkManager goes away.  Kill the timeout
			if NetworkManager restarts before the 30 seconds
			are up.
		- (nmi_dbus_service_init): 
			- call gtk_main_quit if NetworkManager is not running
			- add filters to monitor dbus service creations and
				deletions
	
632
633
634
635
636
637
638
639
640
641
2004-10-08 John (J5) Palmieri <johnp@redhat.com>

	* panel-applet/NMWirelessApplet.c
		- (nmwa_update_state): Hide notification icon if we are only
			showing one wired card and no wireless interfaces 
			(Red Hat Bug #134895)

	* panel-applet/NMWirelessAppletDbus.c
		- (nmwa_dbus_filter): changed exit to gtk_main_quit ()

642
	* info-daemon/NWManagerInfo.c
643
644
		- (main): Terminated the notification_icon_cmd array with a NULL

645
646
647
648
2004-10-08  Hendrik Brandt  <hebra@cvs.gnome.org>

	* configure.in (ALL_LINGUAS): Added de (German).

649
650
651
652
653
654
2004-10-08 Dan Williams <dcbw@redaht.com>

	* src/NetworkManagerDevice.c
		- Be a bit more robust about link checking, ie make sure that
			the WEP key we were given actually has some data in it

655
656
657
658
659
2004-10-08 Dan Williams <dcbw@redhat.com>

	* info-daemon/NetworkManagerInfo.c (main):
		- Initialize GError object to NULL

660
661
662
663
664
2004-10-08 Dan Williams <dcbw@redhat.com>

	* panel-applet/NMWirelessAppletDbus.c
		- Die if NetworkManagerInfo dies, since it manages our lifetime

665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
2004-10-08 Dan Williams <dcbw@redhat.com>

	* info-daemon/NetworkManagerInfo.[ch]
	  info-dameon/NetworkManagerInfoDbus.[ch]
	  info-daemon/NetworkManagerInfoPassphraseDialog.[ch]
		- Preserve original label text in the passphrase dialog so that
			it actually gets updated with the new network name the next
			time around.  Previously, we were overwriting it so you'd get
			the wrong network name to enter a key for
		- Add a "Key Type" combo to the passphrase dialog, user selects
			encryption key type now, type is stored in GConf too
		- Adjust NM<->NMI DBUS protocol to pass the key type back to NM too

	* src/NetworkManagerAP.[ch]
		- Remove all the encyption method magic.  It's now set by the user
			and NetworkManager retrieves the type of encryption key from
			NetworkManagerInfo

	* src/NetworkManagerAPList.[ch]
	  src/NetworkManagerDbus.[ch]
		- Adjust to new way of setting encryption key and method
		- Pull encryption method down from NMI along with key

	* src/NetworkManagerDevice.[ch]
		- Removed encryption method fallback magic as the method is now
			determined by the user.  This greatly simplifies the connection
			logic.
		- More robust connection/link logic.  Besides removing the encryption
			method fallback magic, check whether or not the card is receiving
			invalidly encrypted packets, which usually indicates that we have
			a bad WEP key set.
		- Don't blindly forge ahead when DHCP fails (still not completely fixed)

	* test/nminfotest.c
		- Test out new "Key Type" stuff in the NMI passphrase dialog

701
702
703
704
705
2004-10-07 Dan Williams <dcbw@redhat.com>

	* info-daemon/NetworkManagerInfo.conf
		- Allow root user to run NMI too

706
707
708
709
710
711
712
713
714
715
716
717
2004-10-06 Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerDevice.[ch]
	  src/NetworkManagerDbus.c
	  doc/NetworkManager DBUS API.txt
		- Add a new status tag "scanning", which is set when there
			is no active network connection, but NetworkManager is
			looking for an access point to associate with

	* panel-applet/main.c
		- Cast the applet appropriately for gtk_widget_show_all ()

718
719
720
721
722
Mon Oct  4 12:55:41 2004  Jonathan Blandford  <jrb@redhat.com>

	* panel-applet/eggtrayicon.[ch]:
	* panel-applet/main.c: Add missing file

723
724
725
726
727
728
729
730
731
732
733
2004-10-04 Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerDevice.[ch]
		- Add a slightly more robust method of determining if the WEP key
			is correct or not, by checking the WEP-discarded packet count
			on the card

	* info-daemon/NetworkManagerInfo.c
		- (nmi_gconf_notify_callback): Fix GConf essid escaping, should
			un-escape values we pull out rather than escaping them

734
735
736
737
2004-10-03  Marcel Telka  <marcel@telka.sk>

	* configure.in (ALL_LINGUAS): Added sk.

738
739
740
741
742
743
Fri Oct  1 18:26:03 2004  Jonathan Blandford  <jrb@redhat.com>

	* panel-applet/menu-info.c (nm_menu_wired_class_init): update look
	and feel.  We should be back to working, and have a good, clean
	look.

744
745
746
747
748
749
750
2004-09-30 Dan Williams <dcbw@redhat.com>

	* info-daemon/NetworkManagerInfo.c
	  info-daemon/NetworkManagerInfoDbus.c
	  test/nminfotest.c
		- Escape ESSIDs in gconf

751
752
753
	* src/NetworkManagerDevice.c
		- Fix pseudo-scanning to use netowrk list from info daemon

754
755
756
757
758
759
760
761
762
763
764
765
766
Wed Sep 29 18:18:24 2004  Jonathan Blandford  <jrb@redhat.com>

	* configure.in: Add a temporary --enable-notification-icon.  This
	will prolly go away.

	* info-daemon/Makefile.am:
	* info-daemon/NetworkManagerInfo.c:
	* info-daemon/NetworkManagerInfo.h: Use a notification icon.

	* panel-applet/Makefile.am:
	* panel-applet/NMWirelessApplet.c: Turn into a notification icon
	* panel-applet/NMWirelessApplet.h:

767
768
769
770
771
772
773
774
775
776
Tue Sep 28 16:35:20 2004  Jonathan Blandford  <jrb@redhat.com>

	* panel-applet/NMWirelessApplet.c: Fix deadlock.  Add a separator
	before 'select custom ESSID'.

	* panel-applet/menu-info.c: Start rewrite for better headers.  Not
	fully complete, but syncing in prep for merge.

	* panel-applet/icons/*png: New images

777
778
779
780
781
782
783
2004-09-28 Dan Williams <dcbw@redhat.com>

	* src/NetworkManager.c
	  src/NetworkManagerDevice.c
	  src/NetworkManagerPolicy.c
		- Don't blow away an active wired connection on startup

784
785
786
787
788
789
790
791
792
2004-09-28  Bryan Clark  <clarkbw@cvs.gnome.org>

	Changes from J5
	
	* info-daemon/NetworkManagerInfo.conf: fixed own permissions

	* info-daemon/NetworkManagerInfoDbus.c: added service name to
	syslog output

793
794
795
796
797
Wed Sep 22 14:19:48 2004  Jonathan Blandford  <jrb@redhat.com>

	* panel-applet/NMWirelessApplet.c: Only add essid's if we actually
	have a wireless card.

798
799
800
801
802
Wed Sep 22 14:05:48 2004  Jonathan Blandford  <jrb@redhat.com>

	* panel-applet/NMWirelessApplet.c: move the custom essid item.
	Also, get the right device strings.

803
804
805
806
807
808
809
810
Wed Sep 22 13:51:45 2004  Jonathan Blandford  <jrb@redhat.com>

	* panel-applet/menu-info.c (nm_menu_network_draw_indicator): Flip
	the logic to make this right.

	* panel-applet/NMWirelessApplet.c (sort_networks_function): sort
	devices so that wired networks are always first.

811
812
2004-09-22    <clarkbw@cvs.gnome.org>

clarkbw's avatar
clarkbw committed
813
814
815
816
817
818
819
820
821
822
823
824
	* initscript/Debian/.cvsignore:
	* initscript/Slackware/.cvsignore:
	Added new cvsignores for Makefile, Makefile.in
	
	* test/.cvsignore:
	Added nmtestdevices
	
	* src/NetworkManagerDevice.c: 
	* src/NetworkManager.c: 
	Updated the wireless/wired HAL device strings from net.ethernet to
	net.80203 or net.80211 depending on wired or wireless respectively
	
825
826
827
828
829
830
831
	* examples/python/NetworkManager.py: 
	s/Quality/Strength/

	* examples/python/systray/network_tray.py:
	Lots of little changes and fixes.  been rotting for a while so I
	figured I'd finally sync them all with CVS

832
833
834
835
836
837
838
839
840
841
842
843
844
845
Tue Sep 21 18:05:34 2004  Jonathan Blandford  <jrb@redhat.com>

	* configure.in: Add graphics

	* panel-applet/Makefile.am: Add graphics

	* panel-applet/icons/*: Add graphics

	* panel-applet/NMWirelessApplet.c: Use new menu times to display
	the icons fully lined up.

	* panel-applet/menu-info.c: 
	* panel-applet/menu-info.h: Add another menu type.

846
847
848
849
850
851
Fri Sep 17 14:04:34 2004  Jonathan Blandford  <jrb@redhat.com>

	* panel-applet/NMWirelessApplet.c: Redo the menu item code.

	* panel-applet/menu-item.[ch]: Wireless menu item.

852
853
854
855
856
857
858
859
2004-09-15  John (J5) Palmieri <johnp@redhat.com>

	* info-daemon/NetworkManagerInfo.conf
		- Created a more robust security policy for the DBus service
			- everything is denied by default
			- root can own and send to the service
			- users logged in at the console can send to the service

860
861
862
863
864
865
866
2004-09-13  Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerDevice.c
		- (nm_device_get_essid): use iw_get_basic_config() rather than
			iw_get_ext (SIOCGIWESSID) since prism54 cards don't like
			the latter

867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
2004-09-13  Dan Williams <dcbw@redhat.com>

	* TODO: fix typo

	* docs/NetworkManager DBUS API.txt
		- Update for new signal strength changes

	* panel-applet/NMWirelessApplet.c
		- Make panel icon show strength of the current connection
		- Cleanups and memleak fixes

	* panel-applet/NMWirelessApplet.h
		- Add data members for signal strength on devices and networks

	* panel-applet/NMWirelessAppletDbus.c
		- Free more DBusErrors
		- Update for new signal strength changes
		- Make devices and networks more like real objects, use ref/unref methods
		- Actually unlock the mutex when updating the active device

	* src/NetworkManagerAP.c
		- Change AP functions and data members from "quality"->"strength"

	* src/NetworkManagerDbus.c
		- Kill "getMaxQuality" and "getQuality" methods
		- Add "getStrength" methods for Networks and Devices

	* src/NetworkManagerDevice.[ch]
		- Add accessors for device strength
		- Add functions to update strength for a device.  Note that not all drivers
			actually support signal strength for scanned access points (Atmel drivers
			being one)
		- Calculate signal strength for each AP during scan

	* src/NetworkManagerWireless.[ch]
		- Add function to return signal strength % from a device and a raw quality struct

	* test/nmclienttest.c
		- Update for new signal strength changes

907
908
909
910
911
912
913
914
915
916
2004-09-11  Dan Williams <dcbw@redhat.com>

	* src/NetworkManager.c
		- Fix race condition between initscripts and NM on card insertion
			which could cause a card to keep an IP address and routes around
			even when it was not the active device

	* src/NetworkManagerDbus.c
		- Fix compile errors, free more DBusErrors

917
918
919
920
921
922
923
924
2004-09-11  Dan Williams <dcbw@redhat.com>

	* docs/NetworkManager DBUS API.txt
		- Add an explanation of NM's API

	* src/NetworkManagerDbus.c
		- Free some more DBusErrors if needed

925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
2004-09-11  Dan Williams <dcbw@redhat.com>

	* panel-applet/NMWirelessApplet.c
	  panel-applet/NMWirelessAppletDbus.c
		- Start using NetworkDevice/WirelessNetwork structures in more places
		- Update for unified device/network forcing in NetworkManager

	* src/NetworkManager.c
		- some code consolidation

	* src/NetworkManagerDbus.c
		- (nm_dbus_nm_set_active_device): "setActiveDevice" now takes either one
			or two arguments:  the first is the NM ID of the device to switch to,
			and the second (optional) argument is the ESSID of a wireless network
			to use as well.
		- Get rid of "setNetwork" method due to above change

	* src/NetworkManagerDevice.c
		- (nm_device_new): perform scan and update best AP on device creation
		- nm_device_activation_cancel_if_needed()->nm_device_activation_should_cancel()
		- nm_device_activation_signal_cancel()->nm_device_activation_cancel(), and
			spin waiting for cancellation to finish before returning

	* src/NetworkManagerPolicy.c
		- Changes here clarify the situations in which a device switch occurs, and 
			make sure to keep using a forced device and network if the user gives
			us one
		- Remove old unused code

954
955
956
957
2004-09-11  Martin Willemoes Hansen  <mwh@sysrq.dk>

	* configure.in: Added Danish (da) to ALL_LINGUAS.

958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
2004-09-09  Dan Williams <dcbw@redhat.com>

	* panel-applet/NMWirelessAppletDbus.c
		- Pull fresh devices and networks from NM when wireless networks
			change.  Provides faster feedback of a forced wireless network

	* src/NetworkManagerDbus.c
		- Return error when "getMaxQuality" is called on a wired device
		- Make best_ap freezing actually work again, and signal cancellation
			of activation if there's already a device activation when the user
			freezes the best_ap

	* src/NetworkManagerDevice.c
		- Don't clear out the best_ap for wireless devices when the link goes
			down, that's done elsewhere
		- Kill any dhcp daemons when cancelling device activation since they
			may be stuck waiting for a DHCP address, and since we're cancelling
			activation we don't care about that anymore

	* src/NetworkManagerPolicy.c
		- Make sure to unref the device we ref earlier (we refed it to make sure
			it stuck around during device activation and such)
		- If we were going to change the best device, but its activating currently
			(and therefore the change didn't occur due to the check earlier)
			we mark the state changed to we come back to it later when device
			activation has canceled and its no longer activating

	* src/backends/NetworkManagerRedHat.c
		- SIGKILL dhcp daemons rather than SIGTERM-ing them

988
989
2004-09-09  Bryan Clark  <clarkbw@cvs.gnome.org>

990
991
992
	* info-daemon/passphrase.glade: 
	set passphrase input to activates_default : True

993
994
995
996
997
	* examples/python/systray/network_tray.py
	(network_tray.sort_networks):

	Added support for having wireless always scanning

998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
2004-09-09  Dan Williams <dcbw@redhat.com>

	NOTE: this commit changes the behavior of wireless devices in
	NetworkManager.  They are now up all the time, scanning all
	the time.  Only the active device has an IP address and routing
	information set up however.  Also, NetworkManager will no longer
	opportunistically switch wireless networks when a better one
	comes in range, it will remain associated with one wireless network
	until that one drops out.

	* panel-applet/NMWirelessApplet.c
	  panel-applet/NMWirelessAppletDbus.c
		- List all wireless cards and their respective networks

	* src/NMLoadModules
		- Use full path to /sbin/ip

	* src/NetworkManager.c
		- Keep wireless devices up all the time so they can scan

	* src/NetworkManagerDbus.c
		- On a WirelessNetworkUpdate signal from NMI, don't update
			the "best" AP

	* src/NetworkManagerDevice.c
		- (nm_device_set_link_active): clear out the best ap for
			wireless devices when the link is set to FALSE
		- Scan on all wireless cards, all the time
		- (nm_device_activation_worker): split out the wireless card
			link-waiting code to a separate function
		- Keep wireless cards up even if device activation fails
		- Don't update the "best" ap as much

	* src/NetworkManagerPolicy.c
		- Don't update the best ap when checking if its frozen,
			let link checking clear out a frozen best ap for us

	* src/NetworkManagerWireless.c
		- Scan on all wireless cards, all the time

1038
1039
1040
1041
2004-09-09  Francisco Javier F. Serrador  <serrador@cvs.gnome.org>

	* configure.in: Added 'es' (Spanish) to ALL_LINGUAS.

1042
1043
1044
1045
2004-09-09  Ankit Patel <ankit@redhat.com>

	* configure.in: Added 'gu' (Gujarati) to ALL_LINGUAS.

Pablo Saratxaga's avatar
Pablo Saratxaga committed
1046
1047
1048
1049
2004-09-09  Pablo Saratxaga  <pablo@mandrakesoft.com>

	* configure.in: Added Walloon (wa) to ALL_LINGUAS.

1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
2004-09-08  Bryan Clark  <clarkbw@cvs.gnome.org>

	* examples/python/NetworkManager.py: 
	added CONNECTED, CONNECTING, and DISCONNECTED states
	added methods to return number of devices of a single type

	* examples/python/systray/network_tray.py: 
	did some tweaks to get the menu looking near what it is supposed
	to look like.  Also did a Airo card hack to make it show the
	correct AP quality

1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
2004-09-08  Dan Williams <dcbw@redhat.com>

	* panel-applet/no-networkmanager.png
	  panel-applet/Makefile.am
	  panel-applet/NMWirelessApplet.c
		- Add a "NetworkManager not running" icon and use it
		- Use new consolidated GConf keys rather than Preferred/Trusted

	* TODO: update

	* info-daemon/NetworkManagerInfo.c
	  info-daemon/NetworkManagerInfoDbus.[ch]
	  info-daemon/NetworkManagerInfoPassphraseDialog.c
		- There are now no longer two separate lists of wireless networks,
			but one list where each network is "trusted" or not trusted
		- Add a "getNetworkTrusted" dbus method
		- "WirelessNetworkUpdate" signal now sent rather than
			"PreferredNetworkUpdate/TrustedNetworkUpdate" signals
		- Start freeing some dbus errors (not completed yet)

	* info-daemon/passphrase.glade
		- Remove the "don't show" hints for pager and taskbar
		- Add a title since its going to be in the taskbar

	* src/NetworkManager.[ch]
	  src/NetworkManagerAPList.[ch]
		- There are now no longer two separate lists of wireless networks,
			but one list where each network is "trusted" or not trusted

	* src/NetworkManagerAP.[ch]
		- Add get/set "trusted" accessors and data bit

	* src/NetworkManagerDbus.[ch]
		- Add function to get "trusted" status of a network from NetworkManagerInfo
		- Trap new WirelessNetworkUpdate signal rather than old separate signals

	* src/NetworkManagerDevice.[ch]
		- Add per-device config data (ip4 addr, gateway, netmask) and accessors
		- (nm_device_new): Get device config from backend when initializing devices
		- (nm_device_activation_worker): Split out device configuration on
			activation to deal with static/dynamic IP differences, and try encryption
			fallbacks on a device if the encryption method for the best AP is not good
		- (nm_device_update_best_ap): convert to new consolidated access point lists from
			NetworkManagerInfo, and copy over latest NMI info to best_ap when setting it

	* src/NetworkManagerWireless.c
		- libgcrypt code wasn't converting the MD5 digest to an ascii string, fix it

	* src/backends/NetworkManagerRedHat.c
	  src/backends/NetworkManagerSystem.h
		- (nm_system_device_update_config_info): Add function to get device configuration
			from system data in ifcfg-* files

	* src/backends/NetworkManagerDebian.c
	  src/backends/NetworkManagerGentoo.c
	  src/backends/NetworkManagerSlackware.c
		- Add stub functions for getting device configuration

1119
1120
1121
1122
1123
1124
2004-09-07  Dan Williams <dcbw@redhat.com>

	* src/backends/NetworkManagerRedhat.c
	  src/backends/NetworkManagerSlackware.c
		- Use full path to /sbin/ip everywhere

1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
2004-09-07  Dan Williams <dcbw@redhat.com>

	Patch from: Narayan Newton <narayan_newton@yahoo.com>

	* configure.in
	  initscript/Makefile.am
	  initscript/Slackware/Makfile.am
	  initscript/Slackware/rc.networkmanager
	  src/Makefile.am
	  src/backends/NetworkManagerSlackware.c
		- Add Slackware support

j's avatar
j committed
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
2004-09-07  Dan Williams <dcbw@redhat.com>

	Patches below from:
		<j@bootlab.org>
		Mark Roach <mrroach@okmaybe.com>
		Thom May <thom@debian.org>

	* configure.in
	  initscript/Debian/NetworkManager
	  initscript/Debian/Makefile.am
		- Initscript for Debian

	* src/backends/NetworkManagerDebian.c
		- Add missing system init function to allow compilation
			on Debian

1153
1154
1155
1156
2004-09-03  Raphael Higino <raphaelh@cvs.gnome.org>

	* configure.in: Added 'pt_BR' to ALL_LINGUAS.

1157
1158
1159
1160
2004-09-03  Akagic Amila <bono@linux.org.ba>

	* configure.in: Added 'bs' to ALL_LINGUAS.

1161
1162
1163
1164
1165
1166
2004-09-02  Colin Walters  <walters@verbum.org>

	* src/backends/NetworkManagerRedHat.c (nm_system_device_run_dhcp)
	(nm_system_device_stop_dhcp, nm_system_device_flush_routes): Use
	g_strdup_printf instead of arbitrarily sized buffers.

1167
1168
1169
1170
1171
1172
1173
1174
1175
2004-09-01  Colin Walters  <walters@verbum.org>

	* NetworkManager.pc.in: New file.

	* Makefile.am, .cvsignore, configure.in: Add NetworkManager.pc.

2004-09-01  Amanpreet Singh Alam  <aalam@redhat.com>
	
	* configure.in: Punjabi(pa) is added to po/.
Amanpreet Singh Alam's avatar
Amanpreet Singh Alam committed
1176

1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
2004-08-31  Dan Williams <dcbw@redhat.com>

	* Remove 'debug' extern global from all files since we now
		use syslog()

	* src/NetworkManager.[ch]
		- Break out routine that get the net.interface property from HAL,
			removing that logic from nm_create_device_and_add_to_list()
		- (nm_create_device_and_add_to_list): make this a bit more general so
			it doesn't do the talking to HAL.  Also add arguments to facilitate
			the create of test devices.
		- (nm_data_mark_state_changed): rename from nm_data_set_state_modified()
		- (nm_data_new, main, nm_print_usage): add new argument "--enable-test-devices"
			which makes NetworkManager listen for dbus commands to create test
			devices, which have no backing hardware.  Use when you're on a plane
			for example, and/or forgot your wireless card at home.  Test devices
			_cannot_ be created unless NM is started with --enable-test-devices.

	* src/NetworkManagerDbus.[ch]
		- New "getLinkActive" method for devices
		- New "setLinkActive" method for devices (only works on test devices)
		- New "createTestDevice" method on NetworkManager object to create a test
			device of a specified type (ie wired, wireless).  UDI is created from
			scratch, as is the interface name.  Only works when NM is started with
			--enable-test-devices switch.
		- New "removeTestDevice" method on NetworkManager object which removes a
			test device.  Only works when NM is started with --enable-test-devices

	* src/NetworkManagerDevice.[ch]
		- Logic to facilitate test devices.  Add variables to NMDevice struct to indicate
			whether a device is a test device or not, and what its link status is.
		- Deal with test devices in most functions.  For those that work directly on hardware
			special-case test devices.
		- (nm_device_new): don't create a test device if test devices weren't enabled on the
			command-line.
		- (nm_device_update_link_active): split out logic for wired and wireless device link
			checking to separate functions to facilitate test device link checking.
		- (nm_device_set_enc_key): Since some drivers for wireless cards are daft and
			don't make a distinction between System Authentication and Encryption
			(namely Cisco aironet), we use Open System auth when setting a WEP key
			on the card.  We don't deal with Shared Key auth yet.
		- (nm_device_activation_worker): split the activation cancel check logic out into
			a separate routine nm_device_activation_cancel_if_needed()
		- (nm_device_activation_signal_cancel): rename from nm_device_activation_cancel()
		- (nm_device_fake_ap_list): Test wireless devices obviously cannot scan, so create
			a list of fake access points that they can "see"
		- (nm_device_is_test_device): return whether or not a device is a test device

	* src/NetworkManagerPolicy.c
		- (nm_policy_get_best_device): attempt to deal with wireless network selection,
			previously if you "locked"/forced NM to use a wireless device but then
			selected a wireless network for NM to use, it would switch to a wired device.
			So, if the active device is wireless and it has a "forced" best AP, use it
			if the "forced" best AP is still valid
		- (nm_state_modification_monitor): deal with NULL best devices, for example
			there were no usable network devices, or the last one was removed

	* src/backends/NetworkManager*.c
		- Deal with test devices, mostly just return success for operations like getting
			a DHCP address

	* test/nmtestdevices.c
		- Test tool to create/remove/link-switch test devices

1241
1242
2004-08-30  Bryan Clark  <clarkbw@cvs.gnome.org>

1243
1244
1245
1246
1247
1248
1249
1250
1251
	* examples/python/NetworkManager.py: 
	added convience functions has_wired_device and has_wireless_device

	* examples/python/systray/network_tray.py: 
	cleaned up a bunch of cruft, added support for listing wireless
	networks just like the real applet.  This is probably all I'm
	going to work on this applet from now on.
	TODO: add support for actually changing networks and devices

1252
1253
1254
1255
	* examples/python/NetworkManager.py (NetworkManager.get_device): 
	changed "nm.networks" into a dict from a list so I can store all
	the cool information about networks in there

1256
1257
1258
	* examples/python/systray/network_tray.py: 
	Added nice message when you try to run without running make first

1259
1260
1261
1262
1263
1264
1265
	* examples/python/NetworkManager.py: 
	Bug fixes to the code so we get all the device information
	that we need in get_device()
	
	* examples/python/NMTester.py: 
	Fixed _print_device_list to print_device_list

Seth Nickell's avatar
Seth Nickell committed
1266
1267
1268
1269
1270
1271
2004-08-29  Seth Nickell  <seth@gnome.org>

	* configure.in:

	Actually properly setup the Debian backend in configure.
	
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
2004-08-29  Colin Walters  <walters@verbum.org>

	* test/nminfotest.c: Include string.h and stdlib.h.
	(get_network_string_property, get_networks_of_type): Return NULL.

	* test/nmclienttest.c (get_device_name, get_active_device): Return
	NULL.

	* src/backends/NetworkManagerRedHat.c (nm_system_device_stop_dhcp): Just
	use strlen, fgets always NULL-terminates the string.

	* src/NetworkManagerDbus.c (nm_dbus_nmi_filter,
	dbus_message_get_member): Remove /* in comment.

	* src/NetworkManagerUtils.c (LOCKING_DEBUG): Ditto.

	* src/NetworkManager.c (quit): Unused, delete.
	(nm_data_free): Cast arg to GFunc.

	* panel-applet/NMWirelessAppletDbus.c: Need to include
	string.h, and dbus-glib-lowlevel.h (the latter is needed
	for dbus_connection_setup_with_g_main at present).
	(nmwa_dbus_update_wireless_network_list): Parenthesize
	assignment in conditional.
	(nmwa_dbus_worker): Return NULL.

	* panel-applet/NMWirelessApplet.c (nmwa_redraw)
	(nmwa_get_menu_pos, nmwa_toplevel_menu_activate)
	(nmwa_menu_add_text_item, nmwa_setup_widgets): Kill unused variables.
	(nmwa_populate_menu): Return NULL on failure, instead of just
	return;

	* initscript/NMLaunchHelper.c (g_timeout_add): Cast arg to GSourceFunc.

	* info-daemon/NetworkManagerInfoNetworksDialog.c (nmi_networks_dialog_init): Kill unused
	variables.

	* info-daemon/NetworkManagerInfo.c (nmi_print_usage): Unused,
	delete.
	
1312
1313
2004-08-29  Colin Walters  <walters@verbum.org>

1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
	* src/NetworkManagerDbus.c (nm_dbus_get_network_timestamp): Return
	a GTimeVal instead of time_t.  This is easier to work with,
	since time_t may be a long or double, we don't know.

	* src/NetworkManagerDbus.h: Update prototype.
	
	* src/NetworkManagerAP.c (struct NMAccessPoint): Store a GTimeVal
	instead of time_t.
	(nm_ap_get_timestamp): Update to return GTimeVal.
	(nm_ap_set_timestamp): Update to take GTimeVal.
1324
1325
1326
	
	* src/NetworkManagerDevice.c (nm_device_update_best_ap): Update
	to handle GTimeVal.
1327
1328
1329
1330
1331
1332
1333

	* src/NetworkManagerAPList.c (nm_ap_list_update_network): Handle
	GTimeVal change.
	(nm_ap_list_print_members): Fix warnings in printf format.

2004-08-29  Colin Walters  <walters@verbum.org>
	
1334
1335
	* panel-applet/NMWirelessApplet.c: Include config.h.

1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
2004-08-29  Colin Walters  <walters@verbum.org>

	* configure.in: Generate config.h.

	* configure.in: Dump dependency on OpenSSL; we can't
	use it since this package is GPL:
	http://www.gnome.org/~markmc/openssl-and-the-gpl.html
	Instead, check for libgcrypt, use it if available,
	otherwise use included MD5 code.

	* src/gnome-keyring-md5.h, src/gnome-keyring-md5.c:
	Suck in from gnome-keyring, munge a bit.
	
	* src/Makefile.am (NetworkManager_SOURCES) <!WITH_GCRYPT>: Include
	gnome-keyring-md5.h gnome-keyring-md5.c.
	(NetworkManager_LDADD) <WITH_GCRYPT>: Add dep on LIBGCRYPT_LIBS.

	* src/NetworkManagerWireless.c (nm_md5): New function, uses
	libgcrypt or included gnome-keyring md5 bits.
	(nm_wireless_128bit_key_from_passphrase): Use nm_md5.

1357
1358
1359
1360
2004-08-28  Kjartan Maraas  <kmaraas@gnome.org>

	* configure.in: Add «nb» and «no» to ALL_LINGUAS.

1361
1362
2004-08-27  Bryan Clark  <bclark@redhat.com>

1363
1364
1365
1366
	* examples/python/systray/Makefile: 

	Updated the clean section
	
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
	* examples/python/systray/trayiconmodule.c: 
	* examples/python/systray/trayicon.override: 
	* examples/python/systray/network_tray.py: 
	* examples/python/systray/eggtrayicon.h: 
	* examples/python/systray/eggtrayicon.c: 
	* examples/python/systray/Makefile: 
	* examples/python/README: 
	* examples/python/NetworkManager.py: 
	* examples/python/NMTester.py: 

	Initial commit of these python example files

1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
Fri Aug 28 2004 Dan Williams <dcbw@redhat.com>

	* panel-applet/NMWirelessApplet.c
		- Make current device bold
		- Show more user-friendly device name if we got one from hal

	* panel-applet/NMWirelessAppletDbus.c
		- Grab "info.product" key from hal for network devices
		- Cache the current active device

Adam Weinberger's avatar
   
Adam Weinberger committed
1389
1390
1391
1392
2004-08-27  Adam Weinberger  <adamw@gnome.org>

	* configure.in: Added en_CA to ALL_LINGUAS.

1393
1394
1395
1396
2004-08-27  Christian Rose  <menthos@menthos.com>

	* configure.in: Added "sv" to ALL_LINGUAS.

Dan Williams's avatar
Dan Williams committed
1397
1398
1399
1400
Thu Aug 26 2004 Dan Williams <dcbw@redhat.com>

	* Tag NetworkManager-0.2

1401
1402
1403
1404
1405
1406
1407
Thu Aug 26 17:23:16 2004  Jonathan Blandford  <jrb@redhat.com>

	* initscripts/Makefile.am
	* configure.in: Make pass distcheck

	* po/ChangeLog: added

1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
Thu Aug 26 2004 Dan Williams <dcbw@redhat.com>

	* panel-applet/NMWirelessApplet.c
		- Remove debugging code
		- Enable device switching from menus

	* panel-applet/NMWirelessAppletDbus.[ch]
		- Method for asking NM to switch devices

	* src/NetworkManagerDevice.c
		- Set dev->activating earlier, avoids race between
			the dbus signal of "DeviceActivating" and setting
			dev->activating (which is what NM's "status" method call
			looks at)

1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
Thu Aug 26 2004 Dan Williams <dcbw@redhat.com>

	* panel-applet/NMWirelessApplet.[ch]
		- Rework menu code to add devices to menu, and to show
			signal strength for each access point.  Code cleanups
			too.

	* panel-applet/NMWirelessAppletDbus.c
		- Grab network devices from NetworkManager too
		- Grab quality information from NM for wireless networks

	* src/NetworkManagerDbus.[ch]
		- Add dbus methods for getting the HAL UDI from a device and
			for getting its base quality, if its wireless
		- Consolidate some functions (wireless network notifications,
			device notifications)
		- Add method for requesting NM to use a particular device

	* src/NetworkManager.c
		- Change for function consolidations from NetworkManagerDbus.c
		- Implement active device locking and user-requested devices
			(ie, tell NM to use a particular device instead of the one
			it autochose)

	* src/NetworkManagerDevice.c
		- Add method for getting the base quality of a device, if its
			wireless
		- Grab device base quailty info from iwlib during scans

	* src/NetworkManagerPolicy.c
		- Use a user-requested device rather than the auto-chosen device
			if we are told to

1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
Thu Aug 26 15:12:36 2004  Jonathan Blandford  <jrb@redhat.com>

	* Makefile.am: add po as a supdir

	* autogen.sh: use gnome-autogen.sh

	* initscript/Gentoo/.cvsignore:
	* initscript/RedHat/.cvsignore: Shut up cvs

	* panel-applet/Makefile.am: Define GNOMELOCALEDIR for bonobo.

	* panel-applet/NMWirelessApplet.c: (nmwa_populate_menu),
	(nmwa_fill): Use gettext.

	* configure.in: add gettext support
	* po/.cvsignore:
	* po/NetworkManager.pot:
	* po/POTFILES.in:

1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
2004-08-26  Seth Nickell  <seth@gnome.org>

	* panel-applet/NMWirelessApplet.c: (nmwa_destroy),
	(nmwa_menu_item_activate), (nmwa_toplevel_menu_activate),
	(nmwa_add_menu_item), (nmwa_menu_item_data_free),
	(nmwa_dispose_menu_items), (nmwa_populate_menu),
	(nmwa_setup_widgets), (do_not_eat_button_press), (nmwa_new):
	* panel-applet/NMWirelessApplet.h:

	Use a menu bar instead of a button for the main clickable
	thingy.
	
1487
1488
1489
1490
1491
1492
1493
2004-08-25  Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerDevice.c
		- (nm_device_set_enc_key): always set device to "open" mode instead of
			turning encryption off, because the Cisco driver doesn't associate
			with WEP-enabled access points unless we are in "open"

Dan Williams's avatar
Dan Williams committed
1494
1495
1496
1497
1498
2004-08-25  Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerWireless.c
		- Don't try to defererence blank passphrases

1499
1500
1501
1502
1503
2004-08-25  Dan Williams <dcbw@redhat.com>

	* panel-applet/NMWirelessApplet.c
		- Rebuild the menu whenever a user clicks

1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
2004-08-25  Dan Williams <dcbw@redhat.com>

	* panel-applet/NMWirelessApplet.c
		- (nmwa_udpate_state): Set panel icon to "wired" (for lack of better ones)
			when NM isn't around or when its not connected

	* src/NetworkManagerDevice.c
		- (nm_device_activation_worker): Make sure to reset dev->activating if we get
			canceled.

1514
1515
1516
1517
1518
1519
1520
2004-08-25  Dan Williams <dcbw@redhat.com>

	* panel-applet/NMWirelessAppletDbus.c
		- (nmwa_dbus_get_bool, nmwa_dbus_get_network_encrypted): correct method name
			for getting encryption, and don't stop on "val" once we've gotten it
			from NetworkManager.  Short form:  encryption should now show up.

1521
1522
1523
1524
1525
1526
2004-08-25  Dan Williams <dcbw@redhat.com>

	* panel-applet/NMWirelessApplet.c
		- Set ESSID on a gconf trusted network too when force-setting the wireless
			network to associate with

1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
2004-08-25  Dan Williams <dcbw@redhat.com>

	* panel-applet/*
		- Rework the panel applet to do all DBUS communication in a separate
			thread

2004-08-25  Dan Williams <dcbw@redhat.com>

	* info-daemon/NetworkManagerInfo.[ch]
		- Remove "get_next_priority" function

	* info-daemon/NetworkManagerInfoDbus.[ch]
		- Convert "priority" functions to "timestamp"

2004-08-25  Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerAP.[ch]
		- Add a "enc_method_good" member and accessors to an Access Point
			to signal when we've found the correct encryption method
			for an access point
		- Add a "timestamp" member and accessors, remove "priority" member
			and accessors (use timestamps instead)
		- Rename "wep_key"->"enc_key"
		- (nm_ap_get_enc_key_hashed): new, return the correct mangled key
			for a specified encryption method using the access points
			source encryption key/passphrase

	* src/NetworkManagerAPList.c
		- When updating a network with dbus, grab timestamp now instead of
			priority

	* src/NetworkManagerDBus.[ch]
		- Add signal for "DeviceActivating"
		- Switch priority->timestamp

	* src/NetworkManagerDevice.c
		- Change references of "wep_key" -> "enc_key" or "key"
		- Signal DeviceActivating when starting activation
		- When activating a wireless device, if the access point we are connecting
			to is encrypted, and we have a source key, try to generate a mangled
			key and use that (ie, generate real WEP key from a passphrase)
		- Rework device activation to fallback to other encryption methods if
			a previous one didn't work (ie, try mangling a key as a 104-bit passphrase
			first, then if that doesn't work fall back to direct hex key).
		- (nm_device_update_best_ap): fix a deadlock, and use timestamps instead of
			priority.  We now prefer the latest access point used, rather than using
			a priority scheme
		- (nm_device_do_normal_scan): make the encryption method "unknown" on access
			points we've just discovered, and merge in correct info from the global
			access point lists

1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
2004-08-25  Seth Nickell  <seth@gnome.org>

        Patch from Matthew Garrett <mjg59@srcf.ucam.org> for adding
	Debian support.
	
	* src/Makefile.am:
	* src/backends/NetworkManagerDebian.c: (nm_system_device_run_dhcp),
	(nm_system_device_stop_dhcp), (nm_system_device_flush_routes),
	(nm_system_device_flush_addresses), (nm_system_enable_loopback),
	(nm_system_delete_default_route),
	(nm_system_kill_all_dhcp_daemons), (nm_system_update_dns),
	(nm_system_load_device_modules):

1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
2004-08-24  Dan Willemsen <dan@willemsen.us>

	* src/NetworkManager.c
	  src/backends/NetworkManagerGentoo.c
	  src/backends/NetworkManagerRedHat.c
	  src/backends/NetworkManagerSystem.h
		- Implement preliminary Gentoo support, adding a
			nm_system_init function to the backend specification

	* configure.in
		- Distribution auto-detection, lowercase any user-fed
			distribution names

	* initscript/.cvsignore
	  initscript/Makefile.am
	  initscript/RedHat/Makefile.am
	  initscript/RedHat/NetworkManager
	  initscript/Gentoo/Makefile.am
	  initscript/Gentoo/NetworkManager
		- Refactored initscript code separately for each
			distribution

1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
2004-08-23  Dan Williams <dcbw@redhat.com>

	* configure.in
	  src/Makefile.am
	  src/NetworkManagerDevice.c
	  src/NetworkManager.c
	  src/NetworkManagerUtils.[ch]
	  src/backends/NetworkManagerSystem.h
	  src/backends/NetworkManagerRedHat.c
	  src/backends/NetworkManagerGentoo.c
		- Refactor system-specific code into separate backends for
			each distribution

1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
2004-08-23  Dan Willemsen <dan@willemsen.us>

	* dispatcher-daemon/NetworkManagerDispatcher.c
	  info-daemon/NetworkManagerInfo.[ch]
	  info-daemon/NetworkManagerInfoDbus.c
	  info-daemon/NetworkManagerInfoPassphraseDialog.c
	  src/NetworkManager.c
	  src/NetworkManagerAP.c
	  src/NetworkManagerAPList.c
	  src/NetworkManagerDbus.c
	  src/NetworkManagerDevice.c
	  src/NetworkManagerPolicy.c
	  src/NetworkManagerUtils.[ch]
	  src/NetworkManagerWireless.c
		- Used syslog functions for logging instead of NM_DEBUG_DISPLAY & fprintf

	* src/NetworkManager.c
		- Fixed usage wording for --no-daemon

1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
2004-08-23  Dan Williams <dcbw@redhat.com>

	* panel-applet/NMWirelessApplet.c
		- Update our state every second to get more responsive panel icon
		- (nmwa_update_state): remove bogus applet->pix_state = PIX_WIRED that
			was causing our marching ants status blips to never move when
			looking for a wireless network

	* src/NetworkManagerDevice.c
		- (nm_device_activation_begin): return if activation has already begun
		- (nm_device_do_normal_scan): merge WEP key and priority from the
			trusted/preferred network into the device's access point when the
			scan list is processed

1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
2004-08-23  Dan Williams <dcbw@redhat.com>

	* initscript/NetworkManager
		- Use NMLaunchHelper rather than sleeping

	* initscript/NMLaunchHelper.c
	  Makefile.am
		- Add helper program that exits only when NM activates a device,
			or 10 seconds have passed, whichever happens first.  This
			stops the boot processes until we have a network connection,
			which NM can't do because it daemonizes and brings the connection
			up in the background.  Allows stuff like NFS to not die.

1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
2004-08-20  Dan Williams <dcbw@redhat.com>

	* info-daemon/NetworkManagerInfoPassphraseDialog.c
		- (nmi_passphrase_dialog_ok_clicked): when updating the wep key
			for a network, set the essid as well since it may not exist yet
		- (nmi_passphrase_dialog_init): don't star out the passphrase field,
			since WEP keys/passphrases are long and prone to entry-error

	* panel-applet/Makefile.am
	  panel-applet/wired.png
		- Add (pulled from system-config-network temporarily)

	* panel-applet/NMWirelessApplet.[ch]
		- Show wired picture when a wired connection is used
		- Rename wireless icon enums, adding WIRELESS

	* src/NetworkManagerDevice.c
		- (nm_device_activate_wireless): unset encryption before bringing
			down the card and setting the essid
		- (nm_device_activatin_worker): request a key from the user if the
			AP we are connecting to is encrypted but we don't have a key
			for it yet
		- (nm_device_set_user_key_for_network): fix missing '== 0' for a
			strcmp() that prevented a user-entered key from actually getting
			used

1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
2004-08-16  Dan Williams <dcbw@redhat.com>

	* initscript/NetworkManager
		- Check for /sbin/ip
		- Do sysctl magic that network service does
		- sleep 4s after start to allow network time to come up [hack]

	* src/Makefile.am
	  src/NMLoadModules
		- Load all network device kernel modules (hal doesn't know devices
			are ethernet until the module is loaded, and therefore we don't know)

	* src/NetworkManager.c
		- (main): daemonize later, launch NMLoadModules to alert HAL of our
			network devices, and bring up the loopback device explicitly

	* src/NetworkManagerUtils.[ch]
		- (nm_enable_loopback): new function

1717
1718
1719
1720
2004-08-13  Dan Williams <dcbw@redhat.com>

	* configure.in
	  panel-applet/Makefile.am
Dan Williams's avatar
Dan Williams committed
1721
		- Fix up cleanfiles and server_DATA/server_in_files
1722
1723
1724
1725

	* README
		- Update with some comments on theory of operation

Dan Williams's avatar
Dan Williams committed
1726
1727
1728
1729
	* CONTRIBUTING
	  Makefile.am
		- Add CONTRIBUTING

1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
2004-08-12  Dan Williams <dcbw@redhat.com>

	* info-daemon/passphrase.glade
		- Set window title to " "

	* panel-applet/Makefile.am
	  panel-applet/keyring.png
		- Deliver to correct place

	* panel-applet/NMWirelessApplet.[ch]
		- Add comments
		- Remove applet->have_active_device as its no longer used
		- (nmwa_load_theme): load keyring.png too
		- (error_dialog): remove
		- (show_warning_dialog): subsume functionality of error dialog too
		- (nmwa_destroy, nmwa_new): create and dispose of an application-wide GConfClient
		- (nmwa_handle_network_choice): add to deal with user clicking on an item from
			the networks menu
		- (nmwa_menu_item_activated): GtkMenuItem "activate" signal handler
		- (nmwa_button_clicked, nmwa_setup_widgets): create and populate the menu on startup
			and when we get broadcasts of changed wireless access points only, not when the
			user clicks on the button to display the menu (too long of a wait)
		- (nmwa_add_menu_item): Make active network bold, and place a keyring icon beside
			networks that are encrypted
		- (nmwa_dispose_menu, nmwa_menu_item_data_free): dispose of the data we place on each
			menu item with g_object_set_data()

	* panel-applet/NMWirelessAppletDbus.[ch]
		- (nmwa_dbus_get_bool): add method to return boolean value from dbus message
		- (nmwa_dbus_get_active_network): add (nmwa_dbus_get_string() wrapper to get active network)
		- (nmwa_dbus_add_networks_to_menu): clean up, only show one instance of each ESSID in the menu
		- (nmwa_dbus_set_network): force NetworkManager to use a particular network for wireless cards
		- (nmwa_dbus_init, nmwa_dbus_filter): Trap network appear/disappear and device
			activation/deactivation signals and rebuild the menu when they happen

	* src/NetworkManager.c
		- (main): use new nm_spawn_process() rather than system()

	* src/NetworkManagerDbus.c
		- (nm_dbus_devices_handle_request): don't compare AP structure addresses directly, but essids
			instead.  Since we can now force best_aps to stick around, the AP structure to which
			dev->options.wireless.best_ap points to won't necessarily be in the device's device list
			if a scan has happened since the best_ap was frozen.  Also add "setNetwork" method
			to freeze the best_ap.

	* src/NetworkManagerDevice.[ch]
		- (nm_device_activation_worker): Use new nm_spawn_process() call rather than system()
		- (nm_device_*_best_ap): add freeze/unfreeze/get_frozen functions, and don't really update
			the best_ap in nm_device_update_best_ap() if the best_ap is frozen AND in the device's
			ap list

	* src/NetworkManagerUtils.[ch]
		- (nm_spawn_process): add replacement for system() usage

1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
2004-08-11  Dan Williams <dcbw@redhat.com>

	* panel-applet/NMWirelessApplet.[ch]
		- Fix up copyright and credits to include Bastien and Eskil,
			who created the gnome-applets wireless applet, from whose
			skeleton this one was created
		- Rework nmwa_update_state()/nmwa_draw() so that state and which
			pixmap to draw is computed during nmwa_update_state()
		- Applet now shows itself all the time due to panel packing issues
			which caused the applet to previously never come back after hiding.
			When a wired device is the active device, the applet shows "not connected"

	* panel-applet/NMWirelessAppletDbus.[ch]
		- Clean up error messages and show what function they are from
		- nmwa_dbus_get_active_wireless_device()->nmwa_dbus_get_active_device()
		- Add new device type getters, and a status getter

	* src/NetworkManagerDbus.c
		- (nm_dbus_devices_handle_request): Don't return an active network unless that
			network is actually in the device's ap list
		- (nm_dbus_nm_message_handler): Fix silly mistake returning status

	* src/NetworkManagerDevice.c
		- (nm_device_update_best_ap): If the best AP is NULL, clear out the ESSID of the
			card

	* test/nmclienttest.c
		- Report status of NetworkManager too

1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
2004-08-11  Dan Williams <dcbw@redhat.com>

	* info-daemon/NetworkManagerInfo.c:
		- (main): clean up Seth's code style

	* info-daemon/NetworkManagerInfoDbus.c:
		- Use the more aptly-named path/service/interface constants from NetworkManager
		- Don't return empty strings ("") as object paths ever, instead return errors

	* panel-applet/NMWirelessApplet.c:
		- Clean up Seth's code style

	* src/NetworkManager.[ch]
		- (nm_remove_device_from_list): remove anything having to do with pending_device
		- (main, nm_print_usage): change --daemon=[yes|no] -> --no-daemon

	* src/NetworkManagerAPList.[ch]
		- Move Iter struct right above the iter functions to preserve opacity
		- (nm_ap_list_remove_ap): implement
		- (nm_ap_list_update_network): deal with errors returned from nm_dbus_get_network_priority(),
			remove AP if NetworkManagerInfo doesn't know anything about it
		- (nm_ap_list_diff): user NMAPList iterators
		- (nm_ap_list_print_members): implement debugging function

	* src/NetworkManagerDbus.[ch]
		- (nm_dbus_nm_get_active_device): remove anything to do with pending_device
		- (nm_dbus_get_user_key_for_network): remove DBusPendingCall stuff (unused),
			and move the actual key setting stuff into NetworkManagerDevice.c
		- (nm_dbus_get_network_priority): return -1 now on errors
		- (nm_dbus_nmi_filter): fix strcmp() error that caused PreferredNetworkUpdate signals to
			get lost, and force the active device to update its "best" ap when AP lists change
		- (nm_dbus_nm_message_handler): Update conditions for returning "connecting" for a "status"
			method call due to pending_device member removal

	* src/NetworkManagerDevice.[ch]
		- Move NMDevice structure to the top
		- Add a wireless scan mutex and a best_ap mutex to the Wireless Options structure
		- Remove Pending Action stuff from everywhere
		- (nm_device_activation_*): We now "begin" activation and start a thread to do the
			activation for us.  This thread blocks until all conditions for activation have
			been met (ie for wireless devices, we need a valid WEP key and a "best" ap), and
			then setup up the interface and runs dhclient.  We have to do this because there
			is no guaruntee how long dhclient takes, and while we are blocking on it, we cannot
			run our main loop and respond to dbus method calls or HAL device removals/inserts
		- (nm_device_set_user_key_for_network): Move logic here from NetworkManagerDbus.c so we
			can tell nm_device_activation_worker() that we've got a key
		- (nm_device_*_best_ap): lock access to best_ap member of Wireless Options structure
		- (nm_device_get_path_for_ap): dumb it down so the list doesn't lock against itself when
			diffing (AP appear/disappear signal functions make sure the AP is actually in the device's list)
		- (nm_device_update_best_ap): move logic from nm_wireless_is_ap_better() here

	* src/NetworkManagerPolicy.c
		- Remove anything to do with pending_device
		- Adjust device activation to deal with activation-in-worker-thread

	* src/NetworkManagerUtils.c
		- Clean up locking debugging a bit

	* src/NetworkManagerWireless.[ch]
		- (nm_wireless_is_ap_better): remove, stick logic in nm_device_update_best_ap().  This function
			was badly named and is better as a device function

	* panel-applet/.cvsignore: add

Seth Nickell's avatar
   
Seth Nickell committed
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
2004-08-09  Seth Nickell  <seth@gnome.org>

	* panel-applet/NMWirelessApplet.c: (nmwa_timeout_handler),
	(nmwa_button_clicked), (nmwa_populate_menu), (nmwa_setup_widgets),
	(nmwa_new):
	* src/NetworkManagerDbus.c: (nm_dbus_nmi_filter):

	Don't load the menus until clicked on (also removes a call outside
	normal code paths at first load).

	Hide applet when NM is not present.
	
	Improve printf debugging stuff.
	
1891
1892
1893
1894
1895
1896
2004-08-09  Dan Williams <dcbw@redhat.com>

	* dispatcher-daemon/NetworkManagerDispatcher.c:
		- Covert uses of dbus_message_iter_* over to dbus_message_get_args
		- Use constants for NetworkManager interface, service, and path

1897
1898
1899
1900
1901
1902
1903
1904
2004-08-09  Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerDbus.c:
		- (nm_dbus_nm_get_active_device, nm_dbus_nm_get_devices): Never return an empty object path,
			instead return an error message
		- (nm_dbus_devices_handle_request): Return error when getActiveNetwork/getNetworks is called
			on a wired device.  Also never return an empty object path, instead return an error message

1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
2004-08-06  Seth Nickell  <seth@gnome.org>

	* panel-applet/NMWirelessApplet.c: (nmwa_new):

	Check the error code when getting a connection.
	
	* panel-applet/NMWirelessAppletDbus.c: (nmwa_dbus_init):

	Check if the NM service exists when initializing (rather than
	assuming it does not).
	
	* src/NetworkManagerDbus.c: (nm_dbus_init):

	Don't acquire the well-known service name until we have
	registered object/path handlers and can actually receive
	calls.
	
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
2004-08-06  Dan Williams <dcbw@redhat.com>

	* panel-applet/*
		- Add panel applet

	* src/NetworkManagerPolicy.c
	  src/NetworkManager.c
		- Get access point lists from NetworkManagerInfo on-demand,
			and look for ServiceCreate/ServiceDeleted signals to see when
			we should query NMI for lists
	* src/NetworkManagerAPList.c
		- Make sure to init the list's mutex
		- Convert traversals of the list over to the list iter functions

	* src/NetworkManagerDbus.[ch]
		- Use more aptly-named path/service/interface constants
		- Treat both active and pending devices the same for "getActiveDevice"
		- Add a "status" method returning "connected", "connecting", or "disconnected"

	* src/NetworkManagerDevice.c
		- Honor "ignored" network list when picking best ap to use

1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
2004-08-06  Seth Nickell  <seth@gnome.org>

	* aclocal.m4:

	Autogenerated, remove from CVS.
	
	* autogen.sh:

	Don't hardcode automake version.
	
	* configure.in:
	* info-daemon/Makefile.am:
	* info-daemon/NetworkManagerInfo.c: (main):

	Use GnomeProgram et al. for doing session management.
	Use popt stuff for argument parsing rather than doing
	it manugally.
	
1962
1963
1964
1965
1966
1967
1968
1969
2004-08-05  Dan Williams <dcbw@redhat.com>

	* test/nminfotest.c
		- Update to new NMI dbus API, check different network types

	* info-daemon/NetworkManagerInfoDbus.c
		- Update to new NM dbus API, ie network type sent in query message

1970
1971
1972
1973
2004-08-05  Dan Williams <dcbw@redhat.com>

	* An assload of changes

1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2004-08-02  Dan Williams <dcbw@redhat.com>

	* TODO
		- new task: proper logging support

	* info-daemon/NetworkManagerInfo.c
		- Correct spelling of "canceled"
		- Correct casting of objects for g_signal_connect()

	* info-daemon/NetworkManagerInfoDbus.c
		- Add defines for NetworkManager namespace and object path, and use them
		- Add filter function to trap new signals from NetworkManager:
			WirelessNetworkAppeared, WirelessNetworkDisappeared

	* info-daemon/passphrase.glade
		- Change name of "ok" button to "Login to Network..."
		- Mark invisible

	* src/NetworkManager.c
		- Code and debug message cleanups
		- Rename "nm_add_current_devices"->"nm_add_initial_devices"
		- (nm_add_initial_devices) Check returned string array of devices
			and don't try to add devices if array is NULL
		- (main) Initialize libhal a bit later, make code a bit clearer

	* src/NetworkManagerAP.[ch]
		- New accessor and data member "matched": used to speed up AP list
			diffing
		- New accessor and data member "enc_method": will be used during key
			fallback to cache which passphrase->key conversion actually works
			so we don't have to do it every time

	* src/NetworkManagerAPList.[ch]
		- (nm_ap_list_find_ap_in_list) New: find an AP by essid in an AP list
		- (nm_ap_list_diff) New: given two lists of access points, find the differences
			between them, and send WirelessNetworkAppeared/Disappeared signals over
			dbus in response to those differences

	* src/NetworkManagerDbus.[ch]
		- (nm_dbus_get_object_path_from_ap) New: given a device and an access point,
			make an object path for that access point (NOTE that we don't yet check to
			make sure that access point is actually in the device's AP list yet)
		- (nm_dbus_get_ap_from_object_path) Renamed from nm_dbus_get_network_from_object_path
		- (nm_dbus_signal_wireless_network_appeared, nm_dbus_signal_wireless_network_disappeared)
			New: signal appearance/disappearance of wireless networks
		- (nm_dbus_set_user_key_for_network) Mark the network/ap as invalid if the user cancelled
			key entry

	* src/NetworkManagerDevice.[ch]
		- (nm_device_ap_list_clear) Use nm_ap_list_free rather than doing it ourselves
		- (nm_device_ap_list_get) New: return the AP list (static function)
		- (nm_device_do_normal_scan) Destroy old AP list later, so that we can diff the
			new one resulting from the scan with the old one

	* src/NetworkManagerWireless.c
		- (nm_wireless_is_most_prefered_ap) "invalid" access points cannot be "best" access points

	* test/nminfotest.c
		- #define object paths and namespaces and use the #defines rather than static strings
		- Test out user-key functionality of NetworkManagerInfo too

2035
2036
2037
2038
2039
2040
2041
2004-07-29  Dan Williams <dcbw@redhat.com>

	* info-daemon/NetworkManagerInfoDbus.c
	  src/NetworkManagerDbus.c
		- Update to current DBus (ie don't use decomposed paths when registering
			object paths/fallbacks)

2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2004-07-27  Dan Williams <dcbw@redhat.com>

	* Remove various Makefile.in files

	* TODO
		- Add some more items

	* configure.in
		- Add checks for OpenSSL/md5 headers and libs

	* src/Makefile.am
		- Use OpenSSL CFLAGS

	* src/NetworkManagerAP.[ch]
		- Remove 'stamp' functions, replace with 'invalid' functions
			to support user cancelling WEP key entry

	* src/NetworkManagerDbus.c
		- Remove 'stamp' return functions
		- Treat returned user key as a passphrase and convert to a WEP key,
			but don't actually use the WEP key yet.  We use the returned user
			key as a hexadecimal WEP key until we can figure out a UI for
			passphrase-vs-hex key

	* src/NetworkManagerWireless.[ch]
		- Add passphrase-to-128bit-key function

2069
2070
2071
2072
2073
2004-07-27  Dan Williams <dcbw@redhat.com>

	* TODO
		- Add a couple of items

2074
2075
2076
2077
2078
2079
2080
2081
2082
2004-07-27  Dan Williams <dcbw@redhat.com>

	* info-daemon/NetworkManagerInfo.c
		- Update allowed network's GConf key when user enters a WEP key explicitly

	* info-daemon/NetworkManagerDbus.c
		- Fix some comments
		- nmi_dbus_get_allowed_networks(): kill warning

2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2004-07-27  Dan Williams <dcbw@redhat.com>

	* initscript/Makefile.in
		- Remove

	* initscript/Makefile.am
		- Add correct rules to install the init.d initscript

	* info-daemon/NetworkManagerInfoDbus.c
		- Remove debug fprintf

	* src/NetworkManagerDbus.[ch]
		- Remove debug fprintfs
		- Add macros for NetworkManagerInfo object path/namespace
		- Use said macros instead of constant strings

2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2004-07-27  Dan Williams <dcbw@redhat.com>

	* initscript/.cvsignore
		- Add

	* info-daemon/Makefile.am
		- Install .glade files and keyring.png
		- Fix stupid omission of a \ that caused half the flags not to be
			passed to gcc

	* info-daemon/NetworkManagerInfo.c
		- gtk_signal_connect->g_signal_connect
		- Alert NetworkManagerInfo to new glade file location

2113
2114
2115
2116
2117
2118
2119
2004-07-27  Dan Williams <dcbw@redhat.com>

	* test/nmclienttest.c
	  test/nminfotest.c
		- Add missing <dbus/dbus.h> headers
		- Add GPL message at top

2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2004-07-27  Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerAPList.[ch]
	  src/Makefile.am
		- Add.  Deal with allowed network list additions, deletions, and updates

	* dispatcher-daemon/NetworkManagerDispatcher.c
		- Add missing <dbus/dbus.h> header

	* info-daemon/NetworkManagerInfo.[ch]
		- Add missing <dbus/dbus.h> header
		- Implement the GConf notify callback to signal NetworkManager of an allowed
			network change
		- Better error checking

	* info-daemon/NetworkManagerInfoDbus.[ch]
		- Add missing <dbus/dbus.h> header
		- Convert to using dbus_message_append_args/dbus_message_get_args
		- Implement nmi_dbus_signal_update_allowed_network() to signal NetworkManager
			that an allowed network changed.  We don't want to signal on individual
			keys _inside_ an allowed network really, just want NM to query the info
			daemon for updated info on all keys.
		- Better error checking

	* src/NetworkManager.[ch]
		- Add missing <dbus/dbus.h> header
		- Move allowed_ap_list free functions to NetworkManagerAPList.[ch]
		- Zero out NMData structure on free
		- No longer use a thread for allowed_ap_list updating, instead its now done
			through dbus queries against NetworkManagerInfo
		- Populate allowed_ap_list initially before adding existing network devices
			to the device list, so wireless devices can get their "best" AP

	* src/NetworkManagerDbus.[ch]
		- Convert to using dbus_message_append_args/dbus_message_get_args
		- Better error checking
		- Implement Allowed Network info functions to request allowed network
			info from NetworkManagerInfo
		- Implement the filter function to process signals from NetworkManagerInfo
			about changing allowed networks

	* src/NetworkManagerDevice.c
		- Fix file descriptor leak in nm_device_update_ip4_address()

2164
2165
2166
2167
2168
2169
2170
2171
2172
2004-07-27  Dan Williams <dcbw@redhat.com>

	* .cvsignore
	  src/.cvsignore
	  test/.cvsignore
	  dispatcher-daemon/.cvsignore
	  info-daemon/.cvsignore
		- Add .cvsignore files to reduce noise when diffing

2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2004-07-24  Dan Williams <dcbw@redhat.com>

	* src/NetworkManager.[ch]
	  src/NetworkManagerDbus.[ch]
	  src/NetworkManagerDevice.[ch]
	  src/NetworkManagerPolicy.c
	  src/NetworkManagerWireless.[ch]
		- Add many more g_return_if_fail()/g_return_val_if_fail() checks
		- Pass the NMData application data structure through all calls
			that need it so we can get rid of nm_get_global_data()
		- Change deallocation of the allowed_ap_list GSList in preparation
			for not completely clearing it every time we get an update,
			but instead getting incremental updates via GConf/dbus

2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2004-07-22  Dan Williams <dcbw@redhat.com>

	* configure.in
		- Add checks for GConf libs & headers & flags

	* info-daemon/Makefile.am
		- Add GConf flags & libs to compile/link stages of NetworkManagerInfo

	* info-daemon/NetworkManagerInfo.[ch]
		- Don't use gquarks for data storage, just use normal data storage
		- Add gconf bits to watch /system/networking/wireless/allowed_networks

	* info-daemon/NetworkManagerDbus.[ch]
		- Add method call for getting allowed networks
		- Add method calls for getting an allowed network's essid, priority, and key
		- Hook the method calls up to GConf
		- Split user key dialog code into separate function (nmi_dbus_get_key_for_network)
		- nmi_dbus_nmi_message_handler(): make sure to unref the reply message after sending
		
	* src/NetworkManagerDbus.[ch]
		- Switch for enumeration of networks to using essid instead

	* test/Makefile.am
	  test/nminfotest.c
	  	- Add test program for NetworkManagerInfo

2213
2214
2215
2216
2217
2218
2004-07-19  Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerDbus.c
		- Switch from indexed device paths to names.  Less code, more efficient.
			ie "/org/freedesktop/NetworkManager/0" -> "/org/freedesktop/NetworkManager/eth0"

2219
2220
2221
2222
2223
2004-07-19  Dan Williams <dcbw@redhat.com>

	* dispatcher-daemon/NetworkManagerDispatcher.c
		- (nm_dbus_filter): Remove obsolete response to NeedKeyForNetwork signal

2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
2004-07-19  Dan Williams <dcbw@redhat.com>

	* Makefile.am
		- Add info-daemon directory

	* configure.in
		- Check for glade libs and headers
		- Add info-daemon directory

	* src/NetworkManagerAP.c
		- nm_ap_new_from_ap(): Fix bug that resulted in an APs encryption status not getting
			copied over to the new AP.

	* src/NetworkManagerDbus.c
	  src/NetworkManagerDbus.h
		- Deal with nm_device_ap_list_get_ap()->nm_device_ap_list_get_ap_by_index() change
		- Remove nm_dbus_signal_need_key_for_network()
		- Add disabled code for asynchronous user wep key callbacks
		- Add functions for getting, setting, and cancelling user key operations
		- Remove "setKeyForNetwork" device dbus method call, its on NetworkManager object instead
		- Add "setKeyForNetwork" dbus method call on NetworkManager object

	* src/NetworkManagerDevice.c
	  src/NetworkManagerDevice.h
		- nm_device_update_link_active(): revert changes for wireless link detection, the WEP-key-is-wrong
			logic is in device activation now
		- nm_device_activate(): for wireless devices, if we can't associate with access point (perhaps
			key is wrong) trigger get-user-key pending action
		- Implement get-user-key pending action stuff, tie to dbus messages
		- Rename nm_device_ap_list_get_ap() -> nm_device_ap_list_get_ap_by_index()
		- Add nm_device_ap_list_get_ap_by_essid()
		- Instead of copying "best" access points, ref them instead so that the key we set
			sticks around

	* src/NetworkManagerPolicy.c
		- Deal with wrong WEP key, but right access point (and if so, return link_active = TRUE)
		- Don't cancel pending actions on a device if its the same device as last iteration
		- Only promote pending_device->active_device if activation was successfull

	* src/Makefile.am
		- Rename nmclienttest->nmtest

	* info-daemon/Makefile.am
	  info-daemon/NetworkManagerInfo.c
	  info-daemon/NetworkManagerInfo.h
	  info-daemon/NetworkManagerInfoDbus.c
	  info-daemon/NetworkManagerInfoDbus.h
	  info-daemon/passphrase.glade
	  info-daemon/NetworkManagerInfo.conf
	  info-daemon/keyring.png
	  	- Import sources for info-daemon, which pops up dialog for passphrase/key when
	  		NetworkManager asks for it, and also will (soon) provide "allowed" access point
	  		lists to NetworkManager by proxying user's GConf
	  

2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
2301
2302
2303
2304
2305
2306
2307
2308
2309
2310
2311
2312
2313
2314
2315
2316
2317
2318
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
2331
2332
2333
2334
2335
2336
2004-07-15  Dan Williams <dcbw@redhat.com>

	* src/Makefile.am
		- Turn on warnings

	* src/NetworkManager.c
		- nm_create_device_and_add_to_list(): call nm_device_deactivate() rather
			that doing the deactivation ourselves
		- Cancel an pending actions on a device if its being removed
		- Break up link state checking a bit, make non-active wireless cards
			deactivated to save power
		- Remove unused variables

	* src/NetworkManager.h
		- Add support for "pending" device

	* src/NetworkManagerAP.h
	  src/NetworkManagerAP.c
		- Add support for determining whether and AP has encryption enabled or not
		- AP address is now "struct ether_addr" rather than a string

	* src/NetworkManagerDbus.h
	  src/NetworkManagerDbus.c
		- Add signal NeedKeyForNetwork, method SetKeyForNetwork (testing only)
		- Changes for AP address from struct ether_addr->string

	* src/NetworkManagerDevice.h
	  src/NetworkManagerDevice.c
		- Remove unused variables, fix warnings
		- Add support for Pending Actions (things that block a device from being "active"
			until they are completed).
		- First pending action:  Get a WEP key from the user
		- Add nm_device_is_wire[d|less](), rename nm_device_is_wireless()
		- Clean up explicit testing of dev->iface_type to use nm_device_is_wireless()
		- Update wireless link checking to try to determine if the AP we are associated
			with is correct, but the WEP key we are using is just wrong.  If its wrong,
			trigger the GetUserKey pending action on the device
		- If dhclient can't get an IP address, it brings the device down.  Bring it back
			up in that case, otherwise we can't scan or link-check on it
		- Add IP address change notifications at appropriate points (still needs some work)
		- Add nm_device_need_ap_switch(), checks whether we need to switch access points or not

	* src/NetworkManagerPolicy.h
	  src/NetworkManagerPolicy.c
		- Split out "best" access point determiniation into separate function
		- Make device activation 2-stage:  first the device is pending, then
			in the next iteration through it becomes "active" unless it has
			pending actions

	* src/NetworkManagerUtils.h
	  src/NetworkManagerUtils.c
		- Clean up unused variables and warnings
		- Wrap our debug macros in {} to prevent possible confusion

	* src/NetworkManagerWireless.c
		- Forgot to return current best priority, which lead to last available AP always
			being chosen no matter what its priority was.  Corrected.

2337
2338
2339
2340
2341
2342
2343
2344
2345
2346
2004-07-15  Dan Williams <dcbw@redhat.com>

	* dispatcher-daemon/Makefile.am
		- Turn on warnings

	* dispatcher-daemon/NetworkManagerDispatcher.c
		- Remove unused variables due to warnings
		- Fix some comments
		- Print message on receipt of NeedKeyForNetwork signal (testing only)

2347
2348
2349
2350
2351
2352
2353
2354
2355
2356
2357
2358
2359
2360
2361
2362
2363
2364
2365
2366
2367
2368
2369
2370
2371
2372
2373
2374
2375
2004-07-06  Dan Williams <dcbw@redhat.com>

	* src/NetworkManager.c
		- Add IPv4 address update for active device during link state check
		- Don't allow wireless cards to be powered up when they are not the
			active device

	* src/NetworkManagerDbus.c
	  src/NetworkManagerDbus.h
		- Add DBUS IPv4 address change signal
		- Add DBUS IPv4 address get method for devices

	* src/NetworkManagerDevice.c
		- Make setting the WEP key actually work
		- Move IP address get/set/update stuff here, per-device
		- Power down/bring down wireless device when deactivated
		- For scanning wireless devices, if first scan returned ENODATA, try again

	* src/NetworkManagerPolicy.c
		- Only set the WEP key for an allowed access point if there is one.
			We were setting it to be blank if one wasn't specified.

	* src/NetworkManagerUtils.h
	  src/NetworkManagerUtils.c
		- Move the IP address stuff to NetworkManagerDevice.c

	* dispatcher-daemon/NetworkManagerDispatcher.c
		- Add device IPv4 address change notification stuff

2376
2377
2378
2379
2380
2381
2382
2383
2384
2385
2386
2387
2388
2389
2390
2391
2392
2393
2394
2395
2396
2397
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2004-07-05  Dan Williams <dcbw@redhat.com>

	* dispatcher-daemon/NetworkManagerDispatcher.c
		- A bit more descriptive state message
		- Don't segfault when reading directory

	* src/NetworkManager.h
		- Remove NMData desired_ap member, its now
			per-device rather than global

	* src/NetworkManager.c
		- Remove references to desired_ap
		- Move the allowed AP list refresh stuff into a thread

	* src/NetworkManagerDevice.c
	  src/NetworkManagerDevice.h
		- Each wireless device now has a "best ap"
		- Make device activate/deactivate functions per-device
		- Make wireless scanning per-device
		- Add IPv4 address discover functions, stub IPv6 ones
		- Move ethernet address validation functions to NetworkManagerUtils.c
		- Add wireless access point accessor function
		- Get/Set functions for "best ap"

	* src/NetworkManagerPolicy.c
		- Move activate/deactivate stuff into NetworkManagerDevice.c, per-device
		- Deal with per-device "best ap" rather than data->desired_apa
		- Implement allowed access point worker thread
		- Add nm_policy_essid_is_allowed() function

	* src/NetworkManagerUtils.c
	  src/NetworkManagerUtils.h
	  	- Add nm_ethernet_address_is_valid() function
		- Add IPv4/IPv6 address get functions

	* src/NetworkManagerWireless.c
	  src/NetworkManagerWireless.h
		- Move scanning stuff into NetworkManagerDevice.c, per-device

2415
2416
2417
2418
2419
2004-06-29  Dan Williams <dcbw@redhat.com>

	* dispatcher-daemon/NetworkManagerDispatcher.c
		- Implement script callout functionality

2420
2421
2422
2423
2424
2425
2426
2427
2428
2429
2430
2431
2432
2004-06-24  Dan Williams <dcbw@redhat.com>

	* NetworkManager.c
	    - Spacing cleanups
	    - Flush device routes and ip addresses when added to the device list

	* NetworkManagerDbus.c
	    - Spacing cleanups
	    - Add missing returns in the two signal functions
	
	* NetworkManagerPolicy.c
	    - Spacing and variable cleanups

2433
2434
2435
2436
2437
2438
2439
2440
2004-06-24  Dan Williams <dcbw@redhat.com>

	* Makefile.am
	  Makefile.in
	  configure.in
	  dispatcher-daemon/Makefile.am
	  dispatcher-daemon/Makefile.in
	  dispatcher-daemon/NetworkManagerDispatcher.c
2441
2442
2443
	    - Add a daemon that receives signals from NetworkManager
			and will (eventually) call scripts in /etc/somewhere
			when devices go up or down.
2444
2445
	
	* NetworkManager.c
2446
2447
2448
2449
2450
2451
	    - Spacing cleanups
	    - Flush device routes and ip addresses when added to the device list

	* NetworkManagerDbus.c
	    - Spacing cleanups
	    - Add missing returns in the two signal functions
2452
2453
	
	* NetworkManagerPolicy.c
2454
	    - Spacing and variable cleanups
2455
2456
2457
2458
2459
2460
2461
2462
	    - Rename nm_policy_switch_interface->nm_policy_switch_device
	    - nm_policy_switch_device():
				Use kill (pid) instead of system ("kill <pid>")
	    - nm_state_modification_monitor():
				Add wireless essid to output of debug statements
				Correct typo in device compare to switch or not (should be !=)
				Don't sleep after sending "no longer active" signal, was useless

2463
2464
2465
2004-06-24  Dan Williams <dcbw@redhat.com>

	* Initial import