ChangeLog 187 KB
Newer Older
1 2 3 4 5 6
2005-07-07  Dan Williams  <dcbw@redhat.com>

	Patch from Derek Atkins <warlord@MIT.EDU>
	* src/nm-dbus-net.c:
		- (nm_dbus_get_ap_from_object_path): differentiate similar ESSIDs

7 8 9 10 11 12 13
2005-07-07  Dan Williams  <dcbw@redhat.com>

	Patch from Jos Dehaes <jos_dehaes@fastmail.fm>
	* src/backends/NetworkManagerGentoo.c
		- Gentoo backend Static IP nameserver fixes
		- General Gentoo backend goodness

14 15 16 17 18 19
2005-07-07  Dan Williams  <dcbw@redhat.com>

	Patch from Bastien Nocera:
	* gnome/applet/applet.c
		- Fix up error reporting when icons or glade files are missing

20 21 22 23 24
2005-07-07  Robert Love  <rml@novell.com>

	* gnome/applet/applet.c: do not draw the VPN menu's seperator if there
	  are not any VPN connections above it.

25 26 27 28
2005-07-07  Robert Love  <rml@novell.com>

	* gnome/applet/applet.c: whoops, left some "dog" debugging code in.

29 30 31 32 33
2005-07-05  Robert Love  <rml@novell.com>

	* src/NetworkManagerSystem.c: bail out if asked to set a gateway of
	  zero.

34 35 36 37 38
2005-07-05  Robert Love  <rml@novell.com>

	* src/NetworkManagerDevice.c: use link-local (autoip) on DHCP failure
	  on wired or unencrypted wireless.

39 40
2005-07-01  Robert Love  <rml@novell.com>

41
	* src/NetworkManagerSystem.c: Print the error via strerror().
42

43 44 45 46 47 48
2005-06-30  Robert Love  <rml@novell.com>

	* gnome/vpn-properties/nm-vpn-properties.c: display an error dialog and
	  then exit if the glade file is not found.  currently the application
	  just hangs.

49 50 51 52 53
2005-06-30  Robert Love  <rml@novell.com>

	* src/nm-dbus-nm.c: Patch by Bill Moss <bmoss@clemson.edu> to
	  explicitly up all interfaces on wake from sleep.

54 55 56 57 58 59 60
2005-06-30  Robert Love  <rml@novell.com>

	* gnome/applet/applet.c: Add right-click menu item "Connection Info"
	  with information about the currently active connection.
	* gnome/applet/applet.h: (ditto)
	* gnome/applet/wireless-applet.glade: (ditto), new file

61 62 63
2005-06-30  Robert Love  <rml@novell.com>

	* src/NetworkManagerDevice.c: g_malloc0 cannot fail.
64
	* src/nm-dbus-nm.c: print when we sleep and wake up.
65
	* gnome/applet/menu-items.c: whitespace, misc. cleanup.
66 67
	* configure.in: look in "/usr/sbin" for dhcdbd, too. (it shouldn't be
	  in /sbin unless D-BUS is, folks).
68
	* README: update to reflect nm-applet replacing NetworkManagerInfo.
69

70 71 72 73 74
2005-06-27  Robert Love  <rml@novell.com>

	* src/nm-dbus-nm.c: fix "setWirelessEnabled" call for the enabling
	  case.

75 76 77 78 79
2005-06-27  Robert Love  <rml@novell.com>

	* gnome/applet/applet.c: make the 'Wireless Network Discovery' menu
	  items radios.

80 81 82 83 84
2005-06-26  Robert Love  <rml@novell.com>

	* src/NetworkManagerDevice.c: be specific about which device in
	  nm_info() message.

Adam Weinberger's avatar
 
Adam Weinberger committed
85 86 87 88
2005-06-23  Adam Weinberger  <adamw@gnome.org>

	* src/nm-netlink-monitor.c: correct spelling error.

89 90 91 92 93
2005-06-23  Robert Love  <rml@novell.com>

	* gnome/applet/applet-dbus-info.c: gnome keyring support!
	* gnome/applet/passphrase-dialog.c: more of that keyring!

94 95 96 97 98 99 100
2005-06-23  Robert Love  <rml@novell.com>

	* configure.in: remove extraneous GNOMEKEYRING directives.
	* gnome/applet/Makefile.am: s/GNOMEKEYRING/GNOME_KEYRING/.
	* gnome/applet/applet.c: nmwa_icons_init: make style local.
	* gnome/applet/passphrase-dialog.c: whitespace.

101 102 103 104
2005-06-23  Robert Love  <rml@novell.com>

	* src/NetworkManagerDevice.c: division in assignment was flipped.

105 106 107 108 109 110 111 112
2005-06-23  David Zeuthen  <david@fubar.dk>

	* gnome/applet/vpn-password-dialog.c (child_stdout_data_cb): Send a
	signal to the child to indicate that we got what we wanted when we
	see two new-lines right after each other.
	(nmwa_vpn_request_password): Pass a structure with several members
	instead of just the passwords

113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128
2005-06-23  Dan Williams <dcbw@redhat.com>

	* src/NetworkManager.c
	  src/NetworkManagerMain.h
		- (nm_get_hal_ctx): new function, move Hal initialization code here
		- (nm_hal_init): new function, init libhal context then add devices
		- (nm_hal_deinit): new function, clean up libhal context
		- (nm_data_free): Move Hal cleanup here
		- (main): check whether Hal is running, and if so, get a list of
			network devices from it

	* src/NetworkManagerDbus.c
		- (nm_dbus_signal_filter): trap NameOwnerChanged signals for Hal,
			and when it appears, get a list of network devices from it.  If
			Hal goes away, clean up the libhal context

Robert Love's avatar
 
Robert Love committed
129 130 131 132 133 134
2005-06-22  Robert Love  <rml@novell.com>

	* dispatcher-daemon/NetworkManagerDispatcher.c: fix FIXME: check
	  permissions of scripts before executing.

2005-06-21  Robert Love  <rml@novell.com>
135

136 137
	* initscript/SUSE/networkmanager: update.
	* src/backends/NetworkManagerSuSE.c: cleanup.
138

139 140 141 142 143
2005-06-21  Robert Love <rml@novell.com>

	* gnome/applet/applet.c: use menu mnemonics.
	* gnome/applet/menu-items.c: (ditto)

144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166
2005-06-21  Robert Love  <rml@novell.com>

	* applet/applet-dbus-devices.c: mark non-static functions static.
	* applet/applet-dbus-vpn.c: (ditto)
	* applet/applet.c: (ditto)
	* applet/nm-device.h: (ditto)
	* applet/other-network-dialog.c: (ditto)
	* applet/passphrase-dialog.c: (ditto)
	* NetworkManager.c: (ditto)
	* NetworkManagerDbus.c: (ditto)
	* NetworkManagerDevice.c: (ditto)
	* NetworkManagerPolicy.c: (ditto)
	* NetworkManagerUtils.c: (ditto)
	* NetworkManagerWireless.c: (ditto)
	* NetworkManagerWireless.h: (ditto)
	* nm-netlink-monitor.c: (ditto)
	* applet/applet-dbus-info.c: (ditto), add FIXME's.
	* vpn-manager/nm-dbus-vpn.c: (ditto), remove shadowed variable.
	* autoip.c: include autoip.h.
	* autoip.h: new file.  define get_autoip().
	* nm-netlink-monitor.h: define nm_netlink_close_connection().
	* NetworkManagerDbus.h: remove duplicate definitions.

167 168 169 170 171 172 173 174 175 176 177
2005-06-20  Robert Love  <rml@novell.com>

	* Makefile.am: Add missing intltool-foo.in generated files to
	  EXTRA_DIST so that 'distcheck' works.  Also add DISTCLEANFILES
	  with the start of stuff to cleanup on 'distclea'.
	* configure.in: add AC_PROG_INTLTOOL macro so that we do the intltool
	  stuff right and 'distcheck' works.
	* po/POTFILES.in: Remove examples/python/systray/eggtrayicon.c.  If
	  we keep it, we need to add all of examples/* to EXTRA_DIST and do
	  Makefile.am for each.  And systray/Makefile needs to be redone.

178 179
2005-06-19  Dan Williams <dcbw@redhat.com>

180 181 182
	* src/NetworkManagerDevice.c
	- (nm_device_wireless_process_scan_results): scan every 20s when
	  disconnected and scanning is ALWAYS_SCAN or WHEN_UNASSOCIATED
183

184 185
2005-06-19  Dan Williams <dcbw@redhat.com>

186
	* WEXT_DEBUG->IOCTL_DEBUG, extend checking to all ioctl() calls
187

188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205
2005-06-18  Ray Strode <rstrode@redhat.com>

	* src/nm-netlink-monitor.c 
	(nm_netlink_monitor_event_handler): check for the presence
	of either error condition not both. 
	
	(nm_netlink_monitor_error_handler): emit error signal if
	error occurs.

	(nm_netlink_monitor_event_handler),
	(nm_netlink_monitor_error_handler),
	(nm_netlink_monitor_disconnect_handler): if an 
	assertion fails disconnect the event handler to prevent 
	infinite loops.

	* src/nm-netlink-monitor.h: add new error condition
	NM_NETLINK_MONITOR_ERROR_WAITING_FOR_SOCKET_DATA

206 207 208 209 210 211 212
2005-06-18  Ray Strode <rstrode@redhat.com>

	* src/nm-netlink-monitor.c 
	(nm_netlink_monitor_event_handler): remove bogus < 0
	check on unsigned value and return early if the kernel
	didn't send any bytes.

213 214 215 216 217
2005-06-17  Robert Love  <rml@novell.com>

	* initscript/SUSE/networkmanager: Change the Provides and default
	run levels

218 219 220 221 222 223
2005-06-16  Dan Williams <dcbw@redhat.com>

	Patch from Robert Love:
	* gnome/applet/applet.c
		- Beautify some applet menu item names

224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249
2005-06-17  David Zeuthen  <davidz@redhat.com>

	* gnome/vpn-properties/nm-vpn-ui-interface.h: Require users of this
	API to define NM_VPN_API_SUBJECT_TO_CHANGE to acknowledge API churn.
	Also add new methods can_export, import_file and export.

	* gnome/vpn-properties/nm-vpn-properties.glade: Add an Export button
	to the main UI

	* gnome/vpn-properties/nm-vpn-properties.c:
	Define NM_VPN_API_SUBJECT_TO_CHANGE so we can actually include
	nm-vpn-ui-interface.h.
	(update_edit_del_sensitivity): Also update "Export" sensitivity
	(add_vpn_connection): Also add new SVC_NAME column
	(import_settings): New function
	(retrieve_data_from_selected_connection): New function
	(edit_cb): Use retrieve_data_from_selected_connection to simplify
	this function
	(export_cb): New function
	(init_app): Also setup the "export" widget
	(main): Support the --import-service and --import-file commandline
	arguments

	* gnome/libnm_glib/libnm_glib.c (libnm_glib_dbus_filter): Also support
	D-BUS 0.34

250 251
2005-06-16  Dan Williams <dcbw@redhat.com>

252 253 254 255
	Patch from Robert Love:
	* gnome/applet/menu-items.c
		- (network_menu_item_new): pass -1 as wireless network
			menu items height size request rather than ascent / 2
256

257 258 259 260
2005-06-16  Dan Williams <dcbw@redhat.com>

	* Clean up wording in Wireless Scan Methods menu items and constants

261 262 263 264 265
2005-06-16  Robert Love  <rml@novell.com>

	* po/POTFILES.in
		- remove gtkcell* files

266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282
2005-06-15  Dan Williams <dcbw@redhat.com>

	Patch from Robert Love: make the applet stetic

	* gnome/applet/Makefile.am
		- Don't compile the gtkcellview and gtkcellrendererprogress files

	* gnome/applet/gtkcellview.h
	  gnome/applet/gtkcellview.c
	  gnome/applet/gtkcellrendererprogress.h
	  gnome/applet/gtkcellrendererprogress.c
		- Removed

	* gnome/applet/menu-items.c
		- Progress bars are 5:1 size ratio
		- Use GTK progress bars rather than internal ones

283 284 285 286 287 288
2005-06-15  Dan Williams <dcbw@redhat.com>

	Patch from Robert Love:
	* initscript/SUSE/networkmanager
		- Fix typo

289 290 291 292 293 294 295
2005-06-15  Dan Williams <dcbw@redhat.com>

	* src/backends/NetworkManagerSuSE.c
	  src/backends/NetworkManagerRedHat.c
	  src/backends/NetworkManagerDebian.c
		- (set_ip4_config_from_resolv_conf): Fix typo I made, '==' -> '='

296 297 298 299 300 301 302 303 304 305 306 307 308
2005-06-15  Dan Williams <dcbw@redhat.com>

	* src/backends/NetworkManagerDebian.c
		- Add nm_system_device_get_use_dhcp() to debian backend

	Patch from Kay Sievers:
	* src/backends/NetworkManagerSuSE.c
		- Update debian backend for static IP nameservers

	* src/NetworkManagerDevice.c
		- Actually set the device to use static IP or DHCP rather
			than always DHCP

309 310 311 312 313 314
2005-06-15  Dan Williams <dcbw@redhat.com>

	Patch from Thom May:
	* src/backends/NetworkManagerDebian.c
		- Update debian backend for static IP nameservers

315 316 317 318 319 320 321 322 323 324 325 326 327 328 329
2005-06-15  Dan Williams <dcbw@redhat.com>

	Patches from Robert Love:
	* gnome/applet/wireless-applet.glade
		- Tighten up wording

	* src/NetworkManagerDevice.c
		- Remove misplaced ';'

	* configure.in
	  initscript/Makefile.am
	  initscript/SUSE/Makefile.am
	  initscript/SUSE/networkmanager
		- Add SUSE initscript

330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420
2005-06-12  David Zeuthen  <davidz@redhat.com>

	* gnome/vpn-properties/nm-vpn-ui-interface.h: New file

	* gnome/vpn-properties/nm-vpn-properties.glade: New file

	* gnome/vpn-properties/nm-vpn-properties.c: New file

	* gnome/vpn-properties/Makefile.am: New file

	* src/vpn-manager/nm-vpn-manager.h: Rework prototypes to take an
	array of passwords

	* src/vpn-manager/nm-vpn-manager.c
	(nm_vpn_manager_activate_vpn_connection): Take an array of passwords
	instead of just a single one

	* src/vpn-manager/nm-dbus-vpn.c:
	(nm_dbus_vpn_get_vpn_connection_properties): Also append service_name
	here
	(nm_dbus_vpn_activate_connection): Rework to take an array of passwords

	* gnome/applet/vpn-password-dialog.h (nmwa_vpn_request_password): 
	Change the interface here to give a list of passwords. Also, don't
	require username, but do require service

	* gnome/applet/vpn-password-dialog.c: Look up the VPN .name files for
	the binary for the auth-dialog and use that instead of putting up a
	dialog asking for a single password

	* gnome/applet/vpn-connection.[ch]: Don't remember the user_name,
	however do remember the service

	* gnome/applet/main.c (main): Setup i18n

	* gnome/applet/applet.c (nmwa_update_state): Add a line "VPN
	connection to '%s'" to the tooltip if we are connected using VPN
	(nmwa_menu_vpn_item_activate): Check last_attempt_success gconf
	key to determine whether we the auth-dialog needs to
	reprompt. Also cope with the fact that the auth-dialog now returns
	an array of passwords.
	(nmwa_menu_configure_vpn_item_activate): New handler for
	"Configure VPN..." menu item
	(nmwa_menu_add_vpn_menu): Add the "Configure VPN..." menu item
	(is_vpn_available): New function to determine if we got any
	NM-compatible VPN software installed
	(nmwa_menu_add_devices): Use is_vpn_available to add VPN menu
	items only if we have NM-compatible VPN software installed
	(nmwa_gconf_vpn_connections_notify_callback): Slightly rework the
	logic for detecting when VPN connections are removed

	* gnome/applet/applet-dbus.h: Removed the prototypes for 
	nmwa_dbus_vpn_activate_connection, nmwa_dbus_vpn_deactivate_connection
	since these are defined elsewhere

	* gnome/applet/applet-dbus.c (set_vpn_last_attempt_status): New
	function used to keep track of whether the last attempt succeded
	(nmwa_dbus_filter): Update last_attempt according to whether the
	VPN connection could be established or not

	* gnome/applet/applet-dbus-vpn.h (nmwa_dbus_vpn_deactivate_connection): 
	Change prototype to take an array of passwords, not just a single
	password

	* gnome/applet/applet-dbus-vpn.c (nmwa_dbus_vpn_properties_cb): Only
	update service, not user
	(nmwa_dbus_vpn_remove_one_vpn_connection): Check that applet->
	dbus_active_vpn_name is not NULL before using it
	(nmwa_dbus_vpn_activate_connection): Send the passwords as a
	string array instead of assuming a single password

	* gnome/applet/applet-dbus-info.c:
	(nmi_dbus_get_vpn_connection_properties): Use the logged in user for
	user name; don't read from gconf

	* gnome/applet/Makefile.am: Also export SYSCONFDIR and 
	VPN_NAME_FILES_DIR

	* gnome/Makefile.am (SUBDIRS): Add vpn-properties

	* configure.in: Add checks for gmodule-2.0.
	Generate gnome/vpn-properties/Makefile. Don't generate any Makefile's
	in vpn-daemons nor vpn-daemons/vpnc. We have separate autotooled
	projects under vpn-daemons now.	 See vpn-daemons/vpnc/Changelog
	for details

	* vpn-daemons/Makefile.am: Removed

	* vpn-daemons/README: New file to describe extensions points for VPN
	software

421 422 423 424 425 426 427 428 429 430
2005-06-10  Dan Williams <dcbw@redhat.com>

	* src/backends/NetworkManagerRedHat.c
		- (get_current_profile_name): new function, grab current network profile name from
			/etc/sysconfig/network
		- (set_ip4_config_from_resolv_conf): new function, parse a resolv.conf and
			update an IP4 Config structure's settings from it
		- (nm_system_device_get_system_config): if we're using static IP on this device,
			get DNS info from current network profile

431 432 433 434 435 436 437
2005-06-09  Dan Williams <dcbw@redhat.com>

	Patch from Robert Love:
	* src/NetworkManagerDevice.c
	  src/NetworkManagerUtils.c
		- 64-bit build fixes

438 439 440 441 442 443 444 445
2005-06-09  Dan Williams <dcbw@redhat.com>

	Patch from Kay Sievers and Robert Love:
	* configure.in
	  src/backends/Makefile.am
	  src/backends/NetworkManagerSuSE.c
		- Add SuSE support

446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511
2005-06-09  Dan Williams <dcbw@redhat.com>

	* NetworkManager.h
		- Add NMWirelessScanMethod enum for scan methods

	* gnome/applet/applet-dbus-devices.c
		- (nmwa_dbus_update_scanning_enabled_cb): remove
		- (nmwa_dbus_update_scanning_enabled): remove
		- (nmwa_dbus_update_devices): don't call nmwa_dbus_update_scanning_enabled() anymore
			since it got removed
		- (nmwa_dbus_enable_scanning): remove

	* gnome/applet/applet-dbus-info.c
		- (nmi_dbus_signal_update_scan_method): new function, signal NetworkManager to
			update the wireless scanning method from NMI
		- (nmi_dbus_get_wireless_scan_method): new function, return wireless scanning
			method value to NetworkManager
		- (nmi_dbus_info_message_handler): respond to the "getWirelessScanMethod" method call

	* gnome/applet/applet-dbus-info.h
		- Add prototype for nmi_dbus_signal_update_scan_method

	* gnome/applet/applet.c
		- (scanning_menu_update): new function, update one GtkCheckMenuItem from the
			Wireless Scanning menu based on current wireless scan method
		- (nmwa_menu_scanning_item_activate): new function, callback for GTK "activate"
			signal for Wireless Scanning menu items, tell NetworkManager the new method
			and update our menu items to make sure the right one is checked
		- (nmwa_set_scanning_enabled_cb): remove
		- (nmwa_context_menu_update): remove references to pause_scanning_item
		- (nmwa_context_menu_create): remove pause_scanning_item, and add new Wireless
			Scanning menu item
		- (nmwa_gconf_get_wireless_scan_method): new method, pull wireless scanning method
			from GConf
		- nmwa_gconf_networks_notify_callback -> nmwa_gconf_info_notify_callback: generalize
			so we get notified of preference values too
		- (nmwa_get_instance): monitor GCONF_PATH_WIRELESS rather than GCONF_PATH_WIRELESS_NETWORKS

	* gnome/applet/applet.h
		- GCONF_PATH_WIRELESS added, one level below GCONF_PATH_WIRELESS_NETWORKS
		- Add wireless scan method member to applet data
		- Remove pause_scanning_item, add Wireless Scanning submenu

	* src/NetworkManager.c
		- (nm_data_new): default to NM_SCAN_METHOD_ON
		- (main): grab scanning method from NMI if we can

	* src/NetworkManagerDbus.c
		- (nm_dbus_update_wireless_scan_method_cb): new function, callback from
			nm_dbus_update_wireless_scan_method()
		- (nm_dbus_update_wireless_scan_method): new function to grab scanning method
			from NMI
		- (nm_dbus_nmi_is_running): redundant function, removed
		- (nm_dbus_signal_filter): trap "WirelessScanMethodUpdate" signal, grab scanning method
			when NMI comes back

	* src/NetworkManagerDevice.c
		- (nm_device_is_activated): return TRUE if the device is activated
		- (nm_device_wireless_scan): don't scan if the scan method is OFF, or if its AUTO
			and we are activated

	* src/nm-dbus-nm.c
		- (nm_dbus_nm_set_scanning_enabled): removed
		- nm_dbus_nm_get_scanning_enabled -> nm_dbus_nm_get_wireless_scan_method
		- (nm_dbus_nm_methods_setup): remove [get | set] ScanningEnabled and add "getWirelessScanMethod"

512 513 514 515 516 517
2005-06-09  Dan Williams <dcbw@redhat.com>

	* NetworkManager.h
	  src/vpn-manager/nm-vpn-service.c
		- NM_VPN_STATE_ERROR -> NM_VPN_STATE_UNKNOWN (more consistent with other enums)

518 519 520 521 522 523
2005-05-27  Dan Williams <dcbw@redhat.com>

	* vpn-daemons/vpnc/nm-vpnc-service.c
		- (vpnc_watch_cb): wait a bit before trying to read vpnc's pidfile.
			Should fix the bug where the VPN connection terminates the first time.

524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569
2005-05-20  Dan Williams <dcbw@redhat.com>

	* NetworkManager.h
		- Differentiate VPN config signals between bad VPN config options
			and bad IP config

	* gnome/applet/applet-dbus-info.h
		- Add prototypes for wireless network and vpn connection update functions

	* gnome/applet/applet-dbus.c
		- (nmwa_dbus_filter): trap new VPN config error signals from NetworkManager

	* gnome/applet/applet.c
		- (nmwa_schedule_vpn_failure_dialog): new dialog text for new VPN config
			error signals
		- (nmwa_gconf_networks_notify_cb): re-enable wireless network change notify
			propogation to NetworkManager
		- (nmwa_gconf_vpn_connections_notify_cb): re-enable vpn connection change
			notify propogation to NetworkManager

	* src/NetworkManagerDbus.c
		- (nm_dbus_update_one_allowed_network): make sure to specify which AP list we
			are updating so a network can be removed from it if necessary

	* src/vpn-manager/nm-vpn-manager.c
		- (nm_vpn_manager_process_signal): trap new vpn config error signals

	* vpn-daemons/vpnc/nm-vpnc-service.c
		- (nm_vpnc_dbus_signal_failure): generalize function for all VPN error signals
		- (nm_vpnc_dbus_signal_launch_failed): remove
		- (nm_vpnc_dbus_signal_connect_failed): remove
		- (nm_vpnc_helper_timer_cb): update for new generalized error signal function
		- (nm_vpnc_schedule_helper_timer): increase timeout to 10s
		- (vpnc_watch_cb): don't whine about exit code if vpnc exited cleanly, update
			for new generalized error signal function, remove config file stuff
		- (nm_vpnc_start_vpnc_binary): grab a stdin pipe to vpnc after spawning it so
			we can write configuration options to it
		- (nm_vpnc_config_file_generate): removed
		- (nm_vpnc_config_write): write configuration options to the vpnc stdin pipe
		- (nm_vpnc_config_options_validate): validate the config options we receive
			from NetworkManager to block potential exploits
		- (nm_vpnc_dbus_handle_start_vpn): call option validation function before
			starting vpnc
		- (nm_vpnc_dbus_process_helper_config_error): actually propogate config error
			to NetworkManager

570 571 572 573 574 575
2005-05-16  Dan Williams  <dcbw@redhat.com>

	* vpn-daemons/vpnc/nm-vpnc-service-vpnc-helper.c
		- (main): Work correctly with vpnc 0.3.3 by exiting if the "reason" code
			is not "connect"

576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600
2005-05-16  Dan Williams  <dcbw@redhat.com>

	Patch from Tomislav Vujec <tvujec@redhat.com>
	* gnome/applet/applet-dbus-info.c
		- (nmi_dbus_get_vpn_connection_routes): new function, pull routes out of
			GConf and pass them to NetworkManager.  New key is 'routes' under
			the VPN connection, and should be a string list

	* src/NetworkManagerSystem.c
		- (nm_system_vpn_device_set_from_ip4_config): if user-defined routes exist,
			set them on the device when we set the rest of the VPN config.  Ensure
			they are in the correct format since they are passed directly to the
			command line.

	* src/backends/NetworkManagerRedHat.c
	  src/backends/NetworkManagerDebian.c
		- (nm_system_device_add_route_via_device_with_iface): new function

	* src/vpn-manager/nm-dbus-vpn.c
		- (nm_dbus_vpn_get_routes): grab VPN routes from NetworkManagerInfo

	* src/vpn-manager/nm-vpn-manager.c
		- (nm_vpn_manager_handle_ip4_config_signal): grab routes from NMI and pass
			them into the IP4 config functions

601 602 603 604 605 606 607 608
2005-05-15  Dan Williams  <dcbw@redhat.com>

	From Filip Miletic:
	* po/sr.po
	  po/sr@Latn.po
	  configure.in
		- Serbian translation added

609 610 611 612 613 614 615
2005-05-15  Dan Williams  <dcbw@redhat.com>

	* dispatcher-daemon/NetworkManagerDispatcher.c
		- (main): sync arguments with NetworkManager and the applet, now use
			"--no-daemon" rather than "daemon=no"
		- (nmd_print_usage): Fix script path in usage message

616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653
2005-05-15  Dan Williams  <dcbw@redhat.com>

	* src/NetworkManagerDevice.[ch]
	  src/NetworkManagerPolicy.c
	  src/NetworkManager.c
	  src/nm-dbus-nm.c
		- Remove the "just_added" parameter from nm_device_deactivate().  We no
			longer send the DeviceNoLongerActive signal unconditionally, but only
			when the device is actually active.

	* dispatcher-daemon/NetworkManagerDispatcher.c
		- (nmd_execute_scripts): convert to GLib directory functions from opendir(),
			and simplify the logic
		- (nmd_get_device_name): copy value from dbus reply so we don't segfault when
			we free it later on

	* initscript/RedHat/Makefile.am
	  initscript/RedHat/NetworkManagerDispatcher
		- Add initscript for NetworkManagerDispatcher


	Patch from Bill Moss:
	* dispatcher-daemon/NetworkManagerDispatcher.c
		- Remove IP4AddressChange signal code including nmd_get_device_ip4_address()

	* src/NetworkManagerDbus.c
		- (nm_dbus_signal_device_ip4_address_change): remove.  If the device goes up,
			and DeviceNowActive gets signaled, then the device has a new IP address
			anyway.  There's no need for a separate signal.

	* src/NetworkManagerDevice.c
		- (nm_device_update_ip4_address): Don't send IP4AddressChange signal

	* src/NetworkManagerPolicy.c
		- (nm_policy_activation_finish): Send DeviceNowActive signal when the device
			activates successfully.  This kind of went missing when I reworked the
			activation code.

654 655 656 657 658 659 660 661 662
2005-05-15  Dan Williams  <dcbw@redhat.com>

	* configure.in
		- Check for dhcdbd and error if its not found

	* src/dhcp-manager/Makefile.am
	  src/dhcp-manager/nm-dhcp-manager.c
		- Use path to dhcdbd that configure found

663 664 665 666 667 668 669 670 671 672
2005-05-14  Dan Williams  <dcbw@redhat.com>

	* gnome/applet/nm-device.c
		- (network_device_sort_wireless_networks, sort_networks_function): New functions to
			sort wireless networks alphabetically

	* gnome/applet/applet-dbus-devices.c
		- (mwa_dbus_devices_lock_and_copy): Sort network device's wireless network lists
			before copying them over to the GUI

673 674 675 676 677 678 679 680
2005-05-14  Dan Williams  <dcbw@redhat.com>

	* src/NetworkManager.c
		- (device_stop_and_free): Deactivate VPN connections before deactivating devices,
			fixes a deadlock on shutdown with a VPN connection active.  This function locks
			the device list, as does nm_get_active_device() which is called from
			nm_vpn_manager_deactivate_vpn_connection().

681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718
2005-05-14  Dan Williams  <dcbw@redhat.com>

	* NetworkManager.h
		- Add signals for VPN Launch and Connect failures

	* gnome/applet/applet-dbus.c
		- (nmwa_dbus_filter): Trap new VPN launch & connect failure signals

	* gnome/applet/applet.c
		- (nmwa_show_vpn_failure_dialog): generalize old nmwa_show_vpn_login_failure_dialog()
			function to handle all VPN failure messages
		- (nmwa_schedule_vpn_failure_dialog): generalize old  nmwa_schedule_vpn_login_failure_dialog()
			function to hanlde all VPN failure  messages
		- (show_warning_dialog): work around focus-stealing prevention

	* gnome/applet/other-network-dialog.c
	  gnome/applet/passphrase-dialog.c
		- (update_button_cb): Make sure the OK button is enabled when it should be, fixes
			problem where it never enabled for ASCII Key and Hex Key types

	* gnome/applet/wireless-applet.glade
		- Add window title to Other Wireless Network Dialog

	* src/vpn-manager/nm-dbus-vpn.c
		- (nm_dbus_vpn_signal_vpn_failed): generalize old nm_dbus_vpn_signal_vpn_login_failed()
			function to handle all VPN failure messages

	* src/vpn-manager/nm-vpn-manager.c
		- (nm_vpn_manager_process_signal): trap and proxy VPN launch & connect failure signals too

	* vpn-daemons/vpnc/nm-vpnc-service.c
		- (nm_vpnc_dbus_signal_launch_failed): new function
		- (nm_vpnc_dbus_signal_connect_failed): new function
		- (nm_vpnc_helper_timer_cb): signal connect failure on timeout
		- (vpnc_watch_cb): signal connection failure when vpnc exits with connection failure
		- (nm_vpnc_start_vpnc_binary): search a number of locations for vpnc
		- (nm_vpnc_dbus_handle_start): send launch failure signal when we fail to launch vpnc

719 720 721 722 723 724 725
2005-05-11  Dan Williams  <dcbw@redhat.com>

	* vpn-daemons/vpnc/nm-vpnc-service.c
		- (nm_vpnc_start_vpnc_binary): NULL-ify GError before using it
		- (nm_vpnc_config_file_generate): Attempt to ensure that the path for the config
			file exists before trying to write it out.

726 727 728 729 730 731 732
2005-05-10  Dan Williams  <dcbw@redhat.com>

    * gnome/applet/applet-dbus-device.c
        - (nmwa_dbus_set_device): remove check for valid key and key type, which 
            prevented just entering ESSID and leaving key and key type up to
            NetworkManager (which should have them already cached)

733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748
2005-05-08  Dan Williams  <dcbw@redhat.com>

	* src/NetworkManagerPolicy.c
		- (nm_policy_activation_finish): Don't set NM_ACT_STAGE_ACTIVATED here, instead...
		- (nm_policy_schedule_activation_finish): Set NM_ACT_STAGE_ACTIVATED here to
			fix a situation where NM is told to terminate and the device stops activation,
			but the main thread isn't aware of that because it would never have run
			nm_policy_activation_finish() to set the ACTIVATED flag, because the main loop
			had already quit.

	* src/NetworkManagerDevice.c
		- (nm_device_probe_wired_link_state): cosmetic fixes
		- (nm_device_activate_stage5_ip_config_commit): Don't check link state if
			we've failed to activate or been canceled.
		- (nm_ac_test): nm_debug -> nm_info for "waiting for device to cancel" message

749 750 751 752 753 754 755
2005-05-08  Dan Williams  <dcbw@redhat.com>

	* src/NetworkManagerWireless.c
		- (nm_wireless_qual_to_percent): Fix #if -> #ifdef, print out the "updated"
			value of WEXT quality structures, and add a debug message when we cannot
			determine any quality % at all

756 757 758 759 760 761
2005-05-08  Dan Williams  <dcbw@redhat.com>

	* src/dhcp-manager/nm-dhcp-manager.c
		- (nm_dhcp_manager_begin_transaction): Tell dhclient to release leases when
			it goes down.

762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821
2005-05-06  Dan Williams  <dcbw@redhat.com>

	* gnome/applet/applet-dbus-device.c
	  gnome/applet/applet-dbus-info.c
	  gnome/applet/applet-dbus.c
	  gnome/applet/applet.c
	  gnome/applet/applet.h
		- (nmwa_get_device_for_nm_device) -> (nmwa_get_device_for_nm_path)

	* gnome/applet/applet-dbus.c
		- (nmwa_dbus_filter): trap DeviceCarrierOn/DeviceCarrierOff signals
			so we notice when wired device's carriers come back on.  Should
			fix issue with wired devices being grayed out even if the cable
			is in, for devices that support carrier detection.

	* gnome/applet/applet.c
		- (nmwa_driver_notify): bash focus-stealing prevention in the face
		- (nmwa_act_stage_to_pixbuf): Clarify wireless ACT_STAGE_DEVICE_CONFIG
			tooltip message
		- (nmwa_menu_item_activate, nmwa_menu_add_device_item, nmwa_menu_item_data_free):
			Fix situation where applet wouldn't respond to menu selections

	* src/NetworkManager.c
	  src/NetworkManagerDevice.c
	  src/NetworkManagerDbus.c
	  src/NetworkManagerDbus.h
		- (nm_dbus_signal_device_status_change) -> (nm_dbus_schedule_device_status_change_signal)

	* src/NetworkManagerDbus.c
		- (nm_dbus_send_network_not_found, nm_dbus_schedule_network_not_found_signal):
			Remove, no longer used or relevant
		- (nm_dbus_signal_device_status_change): Better signal enum->string matching
		- (nm_dbus_schedule_device_status_change_signal): add

	* src/NetworkManagerDevice.c
		- (nm_device_worker_thread_stop): don't try to join a NULL worker thread
		- (nm_device_set_link_active): Fix up switching for non-carrier-detect devices,
			ie don't deactivate them unless explicitly told to by the user.  Also send
			CARRIER_OFF / CARRIER_ON signals when link changes
		- (nm_device_set_essid, nm_device_set_enc_key, nm_device_is_up, nm_device_set_mode):
			Don't print error message when device is no longer around
		- (nm_device_deactivate): kill any current DHCP process attached to this device,
			not just during activation

	* src/NetworkManagerPolicy.c
		- (nm_policy_auto_get_best_device): Ignore semi-supported devices completely from
			auto-device-selection.
		- (nm_policy_device_change_check): Don't interrupt semi-supported devices

	* src/NetworkManagerSystem.c
		- (nm_system_device_set_up_down_with_iface): Quiet first warning message when device
			is no longer present (Bill Moss)

	* src/backends/shvar.c
		- (svOpenFile): Open read-only to make SELinux happy

	* src/backends/NetworkManagerRedHat.c
		- (nm_system_device_get_system_config): Use SYSCONFDIR rather than hardcoding
			the path to the ifcfg-* files

822 823 824 825 826 827
2005-05-05  Dan Williams  <dcbw@redhat.com>

	* Expose activation stages to NetworkManager clients, like the applet
	* Add Diana's progress icons to the applet, cued off NM activation stage
	* Use more descriptive tooltips, cued off NM activation stage

828 829 830 831 832
2005-05-05  Ray Strode  <rstrode@redhat.com>

	* src/nm-netlink-monitor.c:
		- Use clear_event_source instead of g_nullify_pointer() again.

833 834 835 836 837 838 839 840
2005-05-05  Dan Williams  <dcbw@redhat.com>

	* gnome/applet/main.c
		- Fix session management so the applet is actually managed now

	* gnome/applet/passphrase-dialog.c
		- (nmi_passphrase_dialog_show): bash focus-stealing prevention in the face

841 842 843 844 845 846
2005-05-05  Dan Williams  <dcbw@redhat.com>

	Patch from Bill Moss:
	* gnome/libnm_glib/libnm_glib.c
		- Fix for dbus-0.33

847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872
2005-05-05  Dan Williams  <dcbw@redhat.com>

	Suggestion from Bill Moss:
	* src/NetworkManagerSystem.c
		- (nm_system_device_set_up_down_with_iface): ignore ENODEV


	* src/NetworkManager.c
		- (nm_data_free): move destruction of the various managers after
			release of device list, because deactivating and freeing a device
			requires at least the named manager
		- (nm_poll_and_update_wireless_link_state):
		  (nm_device_link_activated):
		  (nm_device_link_deactivated):
			don't grab the device list lock when actually updating device
			link status or strength, since nm_device_set_link_active()
			needs to call nm_get_active_device(), which also locks the device list.

	* src/NetworkManagerDevice.c
		- (nm_device_set_link_active): if a device's link switches from off->on,
			and it's wired, and the active device is wireless (or there is no
			active device), activate the new device whose link just came on
		- (link_to_specific_ap): try to smooth over intermittency in wireless links
			my only calling the link to the current ap "failed" when more than 2
			consecutive link checks have failed

873 874 875 876 877 878 879 880 881 882
2005-05-04  Dan Williams  <dcbw@redhat.com>

	* src/NetworkManagerDevice.c
		- (nm_device_probe_wireless_link_state): don't lock the scan mutex here
			but let link_to_specific_ap() do the locking where it needs

	Patch from Bill Moss:
	* src/NetworkManagerSystem.c
		- Set MTU of VPN devices to 1412

883 884 885 886 887 888 889
2005-05-04  Dan Williams  <dcbw@redhat.com>

	* Remove NM_STATE_SCANNING from NetworkManager.h and applet code

	* Fix some holes in device activation and retaining the currently connected
		access point

890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921
2005-05-03  Dan Williams  <dcbw@redhat.com>

	* Kill dhcpcd.  We now use "dhcdbd", a dbus daemon that controls dhclient.
	  This means that NetworkManager shouldn't have DHCP issues anymore.  It also
	  means you need dhcdbd, which you can get here (get the latest one):

		http://people.redhat.com/jvdias/dhcdbd/

	  Technically NetworkManager can use any DHCP daemon that uses the same DBUS
	  interface as dhcdbd.

	* Rewrite device activation to facilitate the new DHCP infrastructure and
	  future improvements.  Its now "activation request" based, ie there is a single
	  activation request composed of the device, access point, and other info which
	  follows the entire activation process.  There are 5 stages of the activation
	  process which correspond to:

		1) Device preparation
		2) Device configuration (bring it up, set ESSID/Key/etc)
		3) IP Config Start (fire off DHCP if we're using it)
		4) IP Config Get (grab config from DHCP or static config files)
		5) IP Config Commit (set device's IP address, DNS, etc)

	  Note that there is no longer a "scanning" step, since the access point must
	  be known _before_ activation starts.  If the access point drops out or does
	  not exist for some reason, the entire activation process fails and must be
	  restarted for a different access point or device.

	Patch from Bill Moss:
	* gnome/applet/applet.c
		- Fix type of vpn_failure dialog -> vpn_banner dialog

922 923 924 925 926 927 928 929 930 931 932
2005-04-27  Dan Williams  <dcbw@redhat.com>

	* gnome/applet/applet-dbus-vpn.c
	  gnome/applet/applet.c
	  gnome/applet/applet.h
		- Fix up active VPN handling so that we reliably know when a VPN
			connection has been deactivated

	* src/vpn-manager/nm-vpn-manager.c
		- Remove duplicate VPNConnectionChange signal

933 934 935 936 937 938 939 940 941
2005-04-27  Dan Williams  <dcbw@redhat.com>

	Patch from Peter Jones:
	* Remove usage of varargs to fix crashes on PPC (RH #154336)

	Patch from Bill Moss:
	* src/NetworkManagerSystem.c
		- Fix checking of return value from ioctl()

942 943 944 945 946
2005-04-27  Dan Williams  <dcbw@redhat.com>

	* Fix choosing of wireless networks and "Other wireless network..." from the applet
	* Warn and exit if icons cannot be found

947 948 949 950 951
2005-04-27  Dan Williams  <dcbw@redhat.com>

	Patch from Tom Parker:
	* Update debian backend

952 953 954 955 956 957 958 959 960 961
2005-04-27  Dan Williams  <dcbw@redhat.com>

	* Merge the applet and the info-daemon, and move the converged
		applet under gnome/applet
	* Move libnm_glib to gnome/libnm_glib
	* Convert most dbus calls between the applet, info-daemon, and NM
		into async calls
	* Fix a few things valgrind noticed
	* Make NM broadcast state more reliably

962 963 964 965
2005-04-22  Pawan chitrakar  <pawan@nplinux.org>

	* configure.in: Added ne in ALL_LINGUAS

966 967 968 969 970
2005-04-15  Dan Williams  <dcbw@redhat.com>

	* libnm_glib/libnm_glib: Fix up for dbus-0.32, and remove
		code for dbus 0.2x versions

971 972 973 974 975 976 977 978 979
2005-04-15  Dan Williams  <dcbw@redhat.com>

	Patches from Tom Parker:
	- Fix memleaks
	- Join with worker thread rather than polling for its exit

	Patch from Bill Moss:
	- Cull duplicate ESSIDs from the scan list, taking highest strength AP

980 981 982 983
2005-04-15  Dan Williams  <dcbw@redhat.com>

	- Fixes to pass 'make distcheck'

984 985 986 987 988 989 990 991 992 993 994
2005-04-15  Dan Williams  <dcbw@redhat.com>

	Initial VPN Support
		- supports 'vpnc'
		- reworks device IP configuration, backend files have changed and will need
			to be updated for all distributions.  I will try to do what I can for
			them, but I cannot test them.

	- Move named directory to src/named-manager
	- Make backends directory self-contained

995 996 997 998 999 1000 1001
2005-04-06  Dan Williams  <dcbw@redhat.com>

	Add debug code for socket/file descriptor leaks.  We register every socket
	that we open (except for stuff in dhcpcd/) for tracking, and print out the
	list of sockets that we forgot to close on shutdown.  This also consolidates
	about 4 places where we opened sockets into 1 function in NetworkManagerUtils.c

1002 1003 1004 1005 1006 1007
2005-04-06  Dan Williams  <dcbw@redhat.com>

	* dhcpcd/dhcpcd.c
		- (dhcp_interface_free): fix a file descriptor leak that may have
			caused network drivers to not unload due to refcounts > 0

1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022
2005-04-04  Dan Williams  <dcbw@redhat.com>

	* panel-applet/NMWirelessAppletDbus.c
		- (nmwa_dbus_call_nm_method): remove some commented code

	* src/NetworkManagerAPList.[ch]
		- (nm_ap_list_remove_ap_by_essid): new function

	* src/NetworkManagerDevice.c
		- (nm_device_wireless_force_use): remove access points from the ignore list
			when the user forces them

	* src/nm-dbus-device.c
		- (nm_dbus_device_get_active_network): fix up escaping of object paths

1023 1024 1025 1026 1027
2005-04-04  Dan Williams  <dcbw@redhat.com>

	Patch from Tom Parker: include "nm-utils.h" for backend files that need it

2005-04-04  Dan Williams  <dcbw@redhat.com>
1028 1029 1030 1031 1032 1033 1034

	* src/NetworkManagerDevice.c:
		- (nm_completion_scan_has_results): restore pre-completion-patch behavior
			of only erroring after the second consecutive scan times out.  Also
			don't exit when the card requires more time than we can give it, just
			log the event and continue.

1035 1036 1037 1038
2005-04-01  Steve Murphy  <murf@e-tools.com>

        * configure.in: Added "rw" to ALL_LINGUAS.

1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055
2005-04-01  Dan Williams <dcbw@redhat.com>

	Perform scans during device activation, if needed.  Both activation 
	and scans run in the same GMainContext.  Therefore, if an access point
	is not found by the time the device starts activation, it will not
	be available until after activation.  We now try to scan during
	activation (in nm_wa_test) every 15s so that all available access
	points are more likely to be found and available for the activation
	procedure.

	Also change nm_wireless_link_state_handle() to only update the "best"
	AP if we are not forcing a device and if we are not about to change
	state.  This attempts to work around a race when forcing a device,
	where the forced AP would get cleared out too soon by the link state
	checking timeout in the main thread, and the activation attempt with
	that AP would fail.

1056 1057 1058 1059 1060
2005-04-01  Dan Williams <dcbw@redhat.com>

	* po/POTFILES.in
		- Update with new translatables

1061 1062 1063 1064 1065 1066
2005-03-31  Dan Williams <dcbw@redhat.com>

	* panel-applet/NMWirelessAppletDbus.c
		- Fix device names now that hal has changed device parenting for
			network devices.

1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152
2005-03-31  Dan Williams <dcbw@redhat.com>

	Tighten up handling of wireless devices that don't support wireless
	scanning (ie, Orinoco).  Due to restructuring of code, these devices
	hadn't been doing pseudo-scanning for a while either and would just
	spin waiting for an access point.  They are now manual devices where
	the user must choose the access point from the menu every time.  All
	"allowed" access points are listed in the applet's menu regardless
	of whether or not they can be seen by the card, since it can't scan
	anyway.

	* src/NetworkManager.c
		- (nm_wireless_link_state_handle): new function, but only update
			the "best" ap for non-scanning devices when its not activating,
			and when no device is being forced on the card
		- (nm_link_state_monitor): split wireless link state handling out
			into separate function

	* src/NetworkManagerDevice.c
		- (nm_device_copy_allowed_to_dev_list): new function
		- (nm_device_new): populate non-scanning cards' AP lists with
			access points from the "allowed" list
		- (nm_device_new): don't start a scanning timeout for devices that
			can't scan
		- (nm_device_activation_schedule_finish): new parameter, should be
			the AP that failed to be connected to, pass it on to the
			activation finish function in NetworkManagerPolicy.c
		- (nm_device_activate_wireless): don't ever try to get a new AP
			for non-scanning devices, just fail.  The user must choose
			a new access point manually.
		- (nm_device_activate): grab the AP that failed connection and
			pass it on
		- (nm_device_update_best_ap): Clear the best AP if we don't have
			a link to it, user must manually choose a new one
		- (nm_device_do_pseudo_scan): remove function
		- (nm_device_wireless_process_scan_results): remove bits for non-
			scanning cards since they never get here
		- (nm_device_wireless_scan): remove bits for non-scanning devices,
			and fake the scan list for test devices a bit earlier

	* src/NetworkManagerPolicy.c
		- (nm_policy_activation_finish): use the failed_ap that we get
			passed rather than getting the best_ap from the card, which
			may have changed since we were scheduled
		- (nm_policy_allowed_ap_list_update): for non-scanning devices,
			update their scan list directly from the allowed list when
			we get updates to the allowed list from NetworkManagerInfo

	* src/NetworkManagerPolicy.h
		- New member for failed access point in NMActivationResult

  -------------------------------------

	Driver Notification patch: notifies the user when their driver
		sucks.  Gives them the option to ignore further insertions
		of the card that has the sucky driver.

	* NetworkManager.h
		- Remove the SEMI_SUPPORTED member from the NMDriverSupportLevel
			enum and replace it with NO_CARRIER_DETECT and
			NO_WIRELESS_SCAN

	* panel-applet/NMWirelessApplet.[ch]
		- Merge essid.glade -> wireless-applet.glade
		- Implement the "Your driver sucks" notification dialog

	* panel-applet/NMWirelessAppletDbus.c
		- Change stuff from getSupportsCarrierDetect->getDriverSupportLevel
		- Grab hardware address for each device from NM too
		- Check whether the driver for each device sucks or not whenever
			a new device is noticed

	* panel-applet/NMWirelessAppletOtherNetworkDialog.c
		- Deal with stuff being in wireless-applet.glade now rather than essid.glade

	* src/NetworkManager.c
		- Fix a double-unref on device removal

	* src/NetworkManagerUtils.c
		- Set appropriate driver support level on a device that doesn't
			support scanning or carrier detection

	* src/nm-dbus-device.c
		- New "getHWAddress" dbus method on devices
		- getSupportsCarrierDetect -> getDriverSupportLevel

1153 1154 1155 1156 1157 1158
2005-03-31  Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerDevice.c
		- (nm_device_wireless_scan): Fix leak of scan results in some
			instances

1159 1160 1161 1162 1163 1164 1165 1166 1167 1168
2005-03-29  Dan Williams <dcbw@redhat.com>

	* src/NetworkManager.c
		- (nm_poll_and_update_wireless_link_state): make code less indented

	Patch from Bill Moss:
	* src/NetworkManager.c
		- (nm_device_update_link_state): Update signal strength on wireless
			devices every time we update link state too.

1169 1170 1171 1172 1173 1174
2005-03-29  Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerDevice.c
		- (nm_device_set_essid): Work around Orinoco cards which need
			extra time after setting the ESSID

1175 1176 1177 1178 1179
2005-03-29  Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerDevice.c
		- Merge one more bit of Peter Jones' completion patch

1180 1181 1182 1183 1184
2005-03-29  Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerDevice.c
		- (nm_device_force_use): Fix possible segfault

1185 1186 1187 1188 1189
2005-03-29  Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerDevice.c
		- Use iw_get_ext() where we should rather than iw_set_ext()

1190 1191 1192 1193 1194 1195 1196
2005-03-29  Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerDevice.c
		- (nm_device_set_up_down): remove check for unsupported devices
			that caused NM to not bring devices up when they were
			added to the device list.

1197 1198 1199 1200 1201 1202
2005-03-28  Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerDevice.c
		- (mdio_read): Fix two bugs that caused all devices to fail
			the MII carrier detection support checks

1203 1204 1205 1206 1207
2005-03-26  Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerDevice.c
		- (nm_device_wireless_scan): Remove duplicated scanning code

1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248
2005-03-25  Dan Williams <dcbw@redhat.com>

	* panel-applet/NMWirelessApplet.c
		- (nmwa_about_cb): Add some more contributors
		- (nmwa_update_state): show the applet when there's no connection
		- Enable the "Stop/Resume all wireless devices" option in the
			context menu
		- New "no connection" icon

	* src/NetworkManager.c
		- (nm_poll_and_update_wireless_link_state): don't do anything if
			wireless is disabled or we're asleep

	* src/NetworkManagerDHCP.c
		- Remove trailing "\n" on debug messages

	* src/NetworkManagerDbus.c
		- (nm_dbus_network_status_from_data): new state "asleep"

	* src/NetworkManagerDevice.c
		- Merge most of Peter Jones' "completion" patch that greatly reduces
			latency and wait times for most operations
		- (nm_device_wireless_scan): Don't scan when asleep

	* src/NetworkManagerPolicy.c
		- (nm_policy_get_best_device): return no device when asleep
		- (nm_policy_allowed_ap_list_update): From Bill Moss: merge properties
			for all wireless devices on update, not just active device

	* src/NetworkManagerUtils.c
		- Merge Peter Jones' "completion" patch

	* src/nm-dbus-nm.c
		- (nm_dbus_nm_set_wireless_enabled): bring down wireless devices when
			we're told to disable them
		- (nm_dbus_nm_sleep, nm_dbus_nm_wake): new functions for sleep/wake

	* utils/nm-utils.h
		- New variants of the warn/info/error/debug print functions that can take
			variables rather than static strings

1249 1250 1251 1252 1253 1254
2005-03-24  Dan Williams <dcbw@redhat.com>

	* src/NetworkManagerUtils.c
		- (nm_get_device_driver_name): driver names are now on the parents of
			"Network Interface" objects, so look for them there

1255 1256 1257
2005-03-24  Dan Williams <dcbw@redhat.com>

	* test/nmtest.c
1258
		- Escape some forgotten object paths before we shove them through dbus
1259

1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280
2005-03-24  Dan Williams <dcbw@redhat.com>

	* dhcpcd/dhcpcd.[ch]
	  src/NetworkManagerDHCP.c
		- Switch names from "*_record_*" -> "*_element_*" to clarify things a bit
			(ie, dhcp_option_record_len -> dhcp_option_element_len)

	* src/NetworkManagerDbus.c
		- spacing cleanups

	* src/nm-dbus-dhcp.c
		- Make the API suck less.  There is now only 1 type of each function,
			ie only "getInteger" and no longer also "getIntegerv".  All types
			are returned encapsulated in a DBUS_TYPE_ARRAY, even for options
			that will never have more than 1 element.  This should simplify
			things greatly.

	* test/nm-dhcp-opt-test.c
		- Make the tool not segfault
		- adapt to new DHCP Options API

1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292
2005-03-22  Dan Williams <dcbw@redhat.com>

	* src/NetworkManager.c
		- (nm_wired_link_deactivated): actually ignore netlink events from
			wireless devices.

2005-03-22  Dan Williams <dcbw@redhat.com>

	* src/NetworkManager.c
		- (nm_wired_link_activated): actually ignore netlink events from
			wireless devices.

1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305
2005-03-17  Dan Williams <dcbw@redhat.com>

	Patch from Tom Parker:
	* src/nm-netlink-monitor.c
		- Include unistd.h
	* info-daemon/NetworkManagerInfoDbus.c
		- (nmi_dbus_update_network_auth_method): free GConf values

	Patch from Nathaniel McCallum <npmccallum@gentoo.org>:
	* src/NetworkManagerDevice.c
		- (nm_device_set_wireless_config): wait for successful
			association longer for some cards (Atheros a/b/g)

1306 1307 1308 1309 1310 1311
2005-03-15  Ray Strode  <rstrode@redhat.com>

	* src/NetworkManager.c:
	(sigterm_pipe_handler):
	remove bogus FIXME

1312 1313
2005-03-15  Ray Strode  <rstrode@redhat.com>

1314 1315 1316 1317
	* src/NetworkManagerDbus.c:
	Fix some sign weirdness that gcc4 doesn't like,
	and add a header file so PPC can hopefully find
	SIGTRAP
1318

1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408
2005-03-14  Ray Strode  <rstrode@redhat.com>
	
	Fourth (probably working) cut at porting to
	dbus 0.30 api and new hal. This cut adds
	some new logging macros to make debugging
	easier.

	* dispatcher-daemon/NetworkManagerDispatcher.c:
	* info-daemon/NetworkmanagerInfo.c:
	* info-daemon/NetworkManagerInfoPassphraseDialog.c:
	* info-daemon/NetworkManagerInfoVPN.c:
	* src/NetworkManager.c:
	* src/NetworkManagerAP.c:
	* src/NetworkManagerAPList.c:
	* src/NetworkManagerDHCP.c:
	* src/NetworkManagerDbus.c:
	* src/NetworkManagerDevice.c:
	* src/NetworkManagerPolicy.c:
	* src/NetworkManagerSystem.c:
	* src/NetworkManagerUtils.c:
	* src/NetworkManagerWireless.c:
	* src/autoip.c:
	* src/nm-dbus-nm.c:
	* src/backends/NetworkManagerDebian.c:
	* src/backends/NetworkManagerGentoo.c:
	* src/backends/NetworkManagerRedHat.c:
	* src/backends/NetworkManagerSlackware.c:
	use new logging macros.

	* dispatcher-daemon/NetworkManagerDispatcher.c:
	(nmd_dbus_filter): s/dbus_free/g_free/

	* info-daemon/Makefile.am: link in utils library.
	* info-daemon/NetworkmanagerInfo.c: use new logging 
	macros.
	(nmi_dbus_get_network): don't assume enumerations
	are 32-bit.
	(nmi_dbus_nmi_message_handler): don't free what 
	doesn't belong to us.

	* libnm_glib/libnm_glib.c:
	(libnm_glib_get_nm_status): 
	(libnm_glib_init): don't free what doesn't
	belong to us.
	(libnm_glib_dbus): strdup result, so it doesn't get
	lost when message is unref'd.

	* panel-applet/NMWirelessAppletDbus.c:
	(nmwa_dbus_update_devices): s/dbus_free/g_free/

	* src/NetworkManager.c:
	(nm_monitor_wired_link_state): request initial status 
	dump of all cards when we start up, instead of relying
	on /sys/.../carrier.
	(nm_info_handler), (nm_set_up_log_handlers): 
	log handlers to specify what syslog priorites 
	the logging macros default to.

	* src/NetworkManagerAPList.c: 
	(nm_ap_list_populate_from_nmi):
	s/dbus_free_string_array/g_strfreev/

	* src/NetworkManagerDbus.c:
	(nm_dbus_get_network_object):
	validate d-bus message argument types.
	Advance message iterator after reading argument,
	prepend instead of append to GSList.

	* src/NetworkManagerDevice.c:
	(nm_device_probe_wired_link_status):
	remove redundant /sys in /sys path. remove wrong
	contents == NULL means has carrier assumption.

	* src/nm-netlink-monitor.c 
	(nm_netlink_monitor_request_status): implement
	function to ask kernel to dump interface link
	status over netlink socket.

	* test/*.c: s/dbus_free/g_free/

	* utils/nm-utils.h:
	(nm_print_backtrace): new macro to print backtrace.
	(nm_get_timestamp): new macro to get sub-second precise
	unix timestamp.
	(nm_info), (nm_debug), (nm_warning), (nm_error):
	new logging functions. nm_info just prints,
	nm_debug includes timestamp and function,
	nm_warning includes function, nm_error includes
	backtrace and sigtrap.

1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445
2005-03-11  Ray Strode  <rstrode@redhat.com>

	Third (unfinished, partially working) cut at porting to 
	dbus 0.30 api and new hal.

	* info-daemon/NetworkManagerInfoDbus.c:
		don't free null arrays.

	* panel-applet/NMWirelessAppletDbus.c: 
	* src/nm-dbus-device.c:
	* src/nm-dbus-net.c: 
	* src/NetworkManagerDbus.c: more 
 	STRING -> OBJECT_PATH fun
	* src/NetworkManagerDevice.c:
	* src/NetworkManagerDevice.h:
	(rename nm_device_get_link_active): rename to 
	nm_device_has_active_link
	(nm_device_wireless_link_active): rename to
	nm_device_probe_wireless_link_state
	(nm_device_wired_link_active): rename to
	nm_device_probe_wired_link_state.  Rewrite to
	use carrier file since hal doesn't maintain
	link state anymore.
	(nm_device_update_link_active): rename to
	nm_device_update_link_state
	* src/NetworkManagerPolicy.c 
	  (nm_policy_activation_finish): check for NULL
	  MAC address.

	* src/Makefile.am:
	* src/NetworkManagerMain.h: 
	* src/NetworkManager.c:
	* src/nm-netlink-monitor.c:
	* src/nm-netlink-monitor.h: New class to support
	monitoring wired ethernet link status, since HAL
	doesn't export that information anymore.

1446 1447 1448 1449 1450
2005-03-09  Ray Strode  <rstrode@redhat.com>

	Second (unfinished, unworking) cut at porting to 
	dbus 0.30 api.

1451
	* dispatcher-daemon/NetworkManagerDispatcher.c:
1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471
	* info-daemon/NetworkManagerInfoDbus.c:
	* panel-applet/NMWirelessAppletDbus.c:
	* src/NetworkManagerDbusUtils.c:
	* src/NetworkManagerDbusUtils.h:
	* src/nm-dbus-device.c:
	* src/nm-dbus-nm.c:
	* test/nmtest.c: support dbus "object path" type

	* configure.in: 
	* Makefile.am:
	* info-daemon/Makefile.am:
	* libnm_glib/Makefile.am:
	* panel-applet/Makefile.am:
	* dispatcher-daemon/Makefile.am
	* src/Makefile.am:
	* test/Makefile.am:
	* utils/Makefile.am: 
	* utils/nm-utils.c: 
	* utils/nm-utils.h: new utils static lib

1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487
2005-03-07  Ray Strode  <rstrode@redhat.com>

	* info-daemon/NetworkManagerInfoDbus.c:
	* libnm_glib/libnm_glib.c:
	* panel-applet/NMWirelessAppletDbus.c:
	* src/NetworkManager.c:
	* src/NetworkManagerDbus.c:
	* src/NetworkManagerDevice.c:
	* src/NetworkManagerUtils.c:
	* src/nm-dbus-device.c:
	* src/nm-dbus-dhcp.c:
	* src/nm-dbus-net.c:
	* src/nm-dbus-nm.c:
	* test/nminfotest.c:
	First (unfinished, unworking) cut at porting to dbus 0.30 api.

1488 1489 1490 1491 1492
2005-03-04  Dan Williams  <dcbw@redhat.com>

	* configure.in
		- Mark HEAD as 0.4

1493 1494 1495 1496 1497
2005-03-04  Dan Williams  <dcbw@redhat.com>

	Patch from Peter Jones:
	- Make stuff work with gcc 4.0

1498 1499 1500 1501
2005-02-28  Maxim Dziumanenko <mvd@mylinux.com.ua>

	* uk.po: Added "uk" (Ukrainian) to ALL_LINGUAS.

1502 1503 1504 1505
2005-02-27  Jim Huang  <jserv@kaffe.org>

	* configure.in: Added "zh_TW" (Traditional Chinese) to ALL_LINGUAS.

1506 1507 1508 1509 1510 1511 1512
2005-02-27  Dan Williams  <dcbw@redhat.com>

	Patch from Bill Moss:
	* panel-applet/NMWirelessAppletDbus.c
		- Make sure strength for current access point is up-to-date when we
			update the gui data model

1513 1514 1515 1516
2005-02-27  Alessio Frusciante  <algol@firenze.linux.it>

	* configure.in: Added "it" (Italian) to ALL_LINGUAS.

1517 1518 1519 1520 1521 1522 1523
2005-02-27  Dan Williams  <dcbw@redhat.com>

	* src/backends/NetworkManagerRedHat.c
		- (nm_system_init): Kill any dhclient processes lying around as well
			as stopping 'nifd' if its already been started.  NetworkManager
			subsumes the functions of nifd (kicking mDNSResponder, autoip)

1524 1525 1526 1527 1528 1529
2005-02-27  Dan Williams  <dcbw@redhat.com>

	* panel-applet/NMWirelessApplet.c
		- (nmwa_destroy): Really mean to destroy GUI data model first, then
			dbus data model, not the GUI data model twice.

1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567
2005-02-27  Dan Williams  <dcbw@redhat.com>

	* panel-applet/NMWirelessApplet.[ch]
	  panel-applet/NMWirelessAppletDbus.[ch]
		- Move to incremental network updates.  Instead of blowing away our list
			of devices every time we get a signal from NetworkManager, we now
			incrementally add/remove networks when NetworkManager notifies us that
			a new network has appeared or disappered.  Strength updates now happen
			on-the-fly for each access point as well.  There are now two copies of
			data from NetworkManager: one for the dbus side, and one for the gui side.
			When the dbus side data is modified, it is copied over to the gui side
			so we don't have to hold the data_mutex for long periods of time (and
			therefore block animation of the applet's icon).
		- Clean up some memleaks too

	* panel-applet/NMWirelessAppletOtherNetworkDialog.c
		- Minor code beautification

	* src/NetworkManagerAPList.c
		- (nm_ap_list_merge_scanned_ap): return whether or not the access point is
			completely new and whether or not an existing one's strength was updated.
			Try to fix multiple access points and signal strength by using the highest
			signal strength in each scan for any given ESSID.

	* src/NetworkManagerDbus.[ch]
		- (nm_dbus_signal_wireless_network_change): consolidate signals that deal with
			wireless networks; now we have only WirelessNetworkUpdate which includes
			a UINT32 for Appeared, Disappeared, or StrengthChanged (see NetworkManager.h).
		- Kill usage of DbusMessageIter

	* src/NetworkManagerDevice.c
		- (nm_device_wireless_process_scan_results): Use the same timestamp for all APs
			in the same scan result list.  Copy ESSIDs-by-address earlier on, for each
			AP rather than all-at-once.  Also don't ever remove the AP a card is
			currently associated with from the network list.
		- Update for new signals during scan, send out Appeared, Disappeared, or
			StrengthChanged when necessary.

1568 1569 1570 1571 1572
2005-02-25  Dan Williams  <dcbw@redhat.com>

	* README
		- Line break the README

1573 1574 1575 1576 1577 1578 1579 1580 1581
2005-02-25  Dan Williams  <dcbw@redhat.com>

	* panel-applet/NMWirelessAppletOtherNetworkDialog.c
		- Remove usage of gtk_window_set_default_size()

	* panel-applet/essid.glade
		- Stick default size here
		- Add in random crap that current glade wants to add in now

1582 1583 1584 1585 1586 1587
2005-02-25  Dan Williams  <dcbw@redhat.com>

	* src/backends/NetworkManagerRedHat.c
		- For non-caching-nameserver/non-named case, ensure that nscd is running
			and that we actually tell nscd to reload the hosts cache when it changes

1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603
2005-02-25  Dan Williams  <dcbw@redhat.com>

	* info-daemon/NetworkManagerInfoDbus.c
		- (nmi_dbus_get_network_properties): whack usage of DbusMessageIter

	* test/nminfotest.c
		- Whack usage of DbusMessageIter
		- Clean up DbusError and DbusMessage handling and freeing
		- Remove unused unregister handler

	* test/nmtest.c
		- Whack usage of DbusMessageIter

	* test/nmtestdevices.c
		- Whack usage of DbusMessageIter

1604 1605 1606 1607 1608 1609
2005-02-25  Dan Williams  <dcbw@redhat.com>

	* NetworkManager.h
		- New signal type NMNetworkStatus in preparation for the "WirelessNetworkUpdate"
			signal

1610 1611 1612 1613 1614 1615
2005-02-25  Dan Williams  <dcbw@redhat.com>

	* named/nm-named-manager.c
		- Ensure that pid and watch variables for child named process get cleared out
			when the child goes away.

1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633
2005-02-22  Dan Williams  <dcbw@redhat.com>

	* src/NetworkManagerPolicy.c
		- (nm_policy_activation_finish): Deactivate a device if its activation fails,
			and NULL out data->active_device so that we have to choose another one.
			This may make NetworkManager keep attempting to connect to a wired network
			if it fails, but if it keeps failing the wired network has more problems than
			just NetworkManager.

	* src/backends/NetworkManagerRedHat.c
		- (nm_system_update_dns): fix to actually run nscd -i hosts when nscd
			is already running

	* named/nm-named-manager.c
		- (rewrite_resolv_conf): Call nm_system_update_dns() when not using
			named so that the distro can flush whatever name service caching
			daemon it uses

1634 1635 1636 1637 1638 1639 1640 1641 1642
2005-02-21  Dan Williams  <dcbw@redhat.com>

	* src/NetworkManagerDHCP.[ch]
		- (nm_device_dhcp_remove_timeouts): new function

	* src/NetworkManagerDevice.c
		- Use nm_device_dhcp_remove_timeouts() everywhere that we need to
			remove the DHCP timeouts.

1643 1644 1645 1646 1647 1648 1649 1650 1651
2005-02-21  Dan Williams  <dcbw@redhat.com>

	* panel-applet/NMWirelessApplet.[ch]
	  panel-applet/menu-info.[ch]
		- Give the panel applet some major love: menu items are no longer
			subclasses of GtkCheckMenuItem, they are actual GtkCheckMenuItems.
			This allows the applet to actually reflect theme changes correctly,
			since themeing of subclassed items in GTK _sucks_.

1652 1653 1654 1655 1656 1657 1658
2005-02-18  Dan Williams  <dcbw@redhat.com>

	* libnm_glib/libnm_glib.[ch]
	  test/libnm_glib_test.c
		- Clean up libnm_glib API a bit, callback is now passed a libnm_glib_ctx
			and its data, and doesn't have to free the callback data anymore

1659 1660 1661 1662 1663 1664 1665 1666
2005-02-18  Dan Williams  <dcbw@redhat.com>

	* panel-applet/NMWirelessApplet.c
		- Revert 2005-02-18 William Jon McCann fix for standard
			copyright string until it passes 'make distcheck'.
			With standard copyright string, xgettext complains
			about "Non-ASCII string at ...".

1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686
2005-02-18  Dan Williams  <dcbw@redhat.com>

	* panel-applet/essid.glade
	  panel-applet/NMWirelessAppletOtherNetworksDialog.c
		- Correct spelling of "adaptor"->"adapter"

2005-02-18  William Jon McCann  <mccann@jhu.edu>

	* panel-applet/NMWirelessApplet.c: Use GTK_CHECK_VERSION() macro.
	(nmwa_about_cb): Use standard copyright string.  Update comment
	text to reflect that it is a notification area applet.  Remove
	leading newline in authors list.
	(nmwa_menu_show_cb, nmwa_setup_widgets): Populate menu on show
	instead of on parent menu item activation.  Fixes #167550.

2005-02-18  William Jon McCann  <mccann@jhu.edu>

	* panel-applet/essid.glade: Capitalize items as per HIG.
	  Fixes #167632

1687 1688 1689 1690 1691 1692 1693
2005-02-16  William Jon McCann  <mccann@jhu.edu>

	* panel-applet/gtkcellrendererprogress.[ch]: Only compile these
	files for GTK 2.4 or lower, since now public in GTK 2.6.

	* panel-applet/essid.glade: Don't specify window size.
	
1694 1695 1696 1697 1698 1699 1700
2005-02-17  Dan Williams  <dcbw@redhat.com>

	Caught by Bill Moss:
	* dhcpcd/client.c
		- Time remaining for DHCP transaction calculation was incorrectly
			inside a #ifdef DEBUG

Christophe Merlet's avatar
Christophe Merlet committed
1701 1702 1703 1704
2005-02-15  Christophe Merlet  <redfox@redfoxcenter.org>

	* configure.in: Added fr (French) to ALL_LINGUAS.

1705 1706 1707 1708 1709
2005-02-14  Dan Williams  <dcbw@redhat.com>

	* src/NetworkManagerDHCP.c
		- (set_domain_searches): Fix free of invalid pointer

1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723
2005-02-14  Dan Williams  <dcbw@redhat.com>

	Patch from Peter Jones:
	* dhcpcd/client.c
		- Ensure we return RET_DHCP_CEASED everywhere we should
	* dhcpcd/udpipgen.c
		- Use faster TOS for IP packets
		- Don't set ip_id since we're UDP

	Patch from Tomislav Vujec:
	* src/nm-dbus-dhcp.c
	  test/nm-dhcp-opt-test.c
		- Clean up warnings to enable cvs tree compilation.

1724 1725 1726 1727 1728 1729
2005-02-14  Tomislav Vujec  <tvujec@redhat.com>

	* configure.in
	  po/hr.po
		- Add the Croatian locale.

1730 1731 1732 1733 1734 1735 1736
2005-02-14  Colin Walters  <walters@verbum.org>

	* src/NetworkManagerDHCP.c (set_domain_searches): Handle space-separated
	list of domains to search.
	
	* src/NetworkManagerMain.h (NMData): Handle multiple domain searches.

1737 1738 1739 1740 1741
2005-02-13  Dan Williams  <dcbw@redhat.com>

	* dhcpcd/client.c
		- Debug output cleanups of DHCP option printing and parsing.

1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767
2005-02-13  Dan Williams  <dcbw@redhat.com>

	Patch from Dan Reed:  DHCP options D-BUS API
		Exposes the DHCP options that a device receives to clients over D-BUS.

	* configure.in
		- A few cleanups

	* dhcpcd/client.h
		- Correct names, option length, and types for DHCP options

	* dhcpcd/dhcpcd.[ch]
		- Clarify function names that access DHCP options & data

	* src/NetworkManagerDHCP.c
		- Use new DHCP data access functions

	* src/NetworkManagerDbus.c
		- Message handler for DHCP functions

	* src/nm-dbus-dhcp.[ch] (new)
		- DHCP dbus methods

	* test/nm-dhcp-opt-test.c
		- Test DHCP D-BUS API and return all present DHCP options

1768 1769 1770 1771 1772 1773 1774
2005-02-12  Dan Williams  <dcbw@redhat.com>

	* test/Makefile.am
	  test/nmclienttest.c
	  test/nmtest.c
		- Move nmclienttest.c -> nmtest.c

1775 1776 1777 1778 1779
2005-02-12  Dan Williams  <dcbw@redhat.com>

	* dhcpcd/buildmsg.c
		- Pad DHCP packets until they are at least 300 bytes in size.

1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807
2005-02-11  Dan Williams  <dcbw@redhat.com>

	* dhcpcd/client.c
		- (dhcp_init): only print out client ID and class ID if they are specified

	* src/NetworkManagerDbus.[ch]
	  src/nm-dbus-nm.[ch]
	  src/nm-dbus-device.[ch]
	  src/nm-dbus-net.[ch]
		- Move NM, Device, and Net functions to separate files and use the
			dbus method list stuff in NetworkManagerDbusUtils.c to do
			method dispatching

	* src/NetworkManagerDbusUtils.c
		- Add new validate_method called before each dispatch (if present)
			that can validate the method call

	* src/NetworkManagerWireless.c
		- (nm_wireless_qual_to_percent): Fix misplaced "!" that caused signal
			levels never to be evaluated

	Patch from j@bootlab.org
	* src/NetworkManagerDevice.c
		- Add typedef for "u64"

	* src/backends/NetworkManagerDebian.c
		- Copy in Dave Woodhouse's fixes for IPv6

1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818
2005-02-11  Dan Williams  <dcbw@redhat.com>

	Patch from Dave Woodhouse for IPv6:
	* src/NetworkManagerUtils.c
		- (nm_ethernet_address_is_valid): Check for prism54 dummy MAC address
			and multicast addresses

	* src/NetworkManagerDevice.c
		- (nm_device_set_up_down): make sure our cached MAC address is up-to-date
			after bringing up a card.

1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833
2005-02-10  Dan Williams  <dcbw@redhat.com>

	Patch from Dave Woodhouse:
	* src/NetworkManagerSystem.h
	  src/backends/NetworkManagerDebian.c
	  src/backends/NetworkManagerGentoo.c
	  src/backends/NetworkManagerSlackware.c
		- New nm_system_device_add_ip6_link_address() function to add link-local
			address on an interface.  Stubbed in Debian, Gentoo, and Slackware.

	* src/backends/NetworkManagerRedHat.c
		- (nm_system_device_add_ip6_link_address): implement
		- (nm_system_device_flush_addresses): revert to previous behavior of
			flushing all addresses

1834 1835 1836 1837 1838 1839 1840
2005-02-10  Dan Williams  <dcbw@redhat.com>

	Patch from Tom Parker:
	* src/NetworkManagerDevice.c
		- Remove the "#include <pci/types.h>" since both the ethtool.h and
			mii.h headers are broken, and instead use our own typedefs

1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859
2005-02-10  Dan Williams  <dcbw@redhat.com>

	* dhcpcd/buildmsg.c
		- (fill_host_and_class_id): only fill in client and class IDs if
			they are set by callers.

	* dhcpcd/client.c
		- (class_id_setup): don't autogenerate a class ID, only use one
			we're given, if any.
		- (client_id_setup): don't autogenerate a client ID, only use one
			we're given, if any.

	* dhcpcd/dhcpcd.c
		- (dhcp_interface_init): ensure that client options are correctly
			NULL terminated

	* src/NetworkManagerDHCP.c
		- (nm_device_dhcp_request): pass hostname to dhcp library

1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876
2005-02-10  Dan Williams  <dcbw@redhat.com>

	* dhcpcd/client.c
		- #rh147661# Don't send kernel version in DHCP requests

	* src/NetworkManagerSystem.h
	  src/backends/NetworkManagerDebian.c
	  src/backends/NetworkManagerGentoo.c
	  src/backends/NetworkManagerRedHat.c
	  src/backends/NetworkManagerSlackware.c
		- Remove the nm_system_device_run_dhcp() and nm_system_device_stop_dhcp()
			functions, they are no longer used anyway

	* src/backends/NetworkManagerRedHat.c
		- (nm_system_device_flush_addresses): only flush "scope global" and "scope site"
			addresses in an attempt to keep IPv6 local-scope addresses around

1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893
2005-02-10  Dan Williams  <dcbw@redhat.com>

	* src/NetworkManager.c
		- (nm_create_device_and_add_to_list): change the add message slightly

	* src/NetworkManagerUtils.c
		- (nm_get_wireless_driver_support_level, nm_get_wired_driver_support_level):
			Return driver name to calling function
		- (nm_get_driver_support_level): print out the driver a device is using
			during the support check

	Patch from Dave Woodhouse: